Effect of Lt GaAs on Epitaxial Al/GaAs Schottky Diode Characteristics

1992 ◽  
Vol 262 ◽  
Author(s):  
Kai Zhang ◽  
D. L. Miller
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Schottky Contact ◽  
Gaas Layer ◽  
Effective Barrier Height ◽  
Fermi Level Pinning ◽  
Effective Barrier ◽  
Defect Source ◽  
Lt Gaas

ABSTRACTThe effect of LT GaAs on the effective barrier height of the epitaxial Al/GaAs Schottky contact was investigated for the first time by inserting a thin LT GaAs layer (50 ∼ 500Å) between the in situ deposited Al film and conventional MBE GaAs epitaxial layer. The activation energy plot of saturation current for the devices showed that the effective barrier height exhibits a dependence on LT GaAs thickness and reaches a saturated barrier height when the LT GaAs layer exceeds a critical thickness. Compared to the samples which had no LT GaAs layer, the effective Schottky barrier height was decreased from 0.79 eV to 0.35 eV for the n-GaAs samples, and increased from 0.55 eV to 0.72 eV for the p-GaAs samples. The Schottky barrier height modification achieved by LT GaAs is tentatively explained in the terms of a bulk Fermi level pinning model. The work described here suggests that LT GaAs can be used as a defect source with controlled thickness to study defect associated phenomena such as Schottky barrier height modification.

scholarly journals Reduction of Schottky Barrier Height at Graphene/Germanium Interface with Surface Passivation

2019 ◽  
Vol 9 (23) ◽  
pp. 5014
Author(s):  
Courtin ◽  
Moréac ◽  
Delhaye ◽  
Lépine ◽  
Tricot ◽  
...  
Keyword(s):  
Fermi Level ◽  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Surface Passivation ◽  
2D Materials ◽  
Semiconductor Interface ◽  
Weakly Interact ◽  
Fermi Level Pinning ◽  
Semiconductor Interfaces

Fermi level pinning at metal/semiconductor interfaces forbids a total control over the Schottky barrier height. 2D materials may be an interesting route to circumvent this problem. As they weakly interact with their substrate through Van der Waals forces, deposition of 2D materials avoids the formation of the large density of state at the semiconductor interface often responsible for Fermi level pinning. Here, we demonstrate the possibility to alleviate Fermi-level pinning and reduce the Schottky barrier height by the association of surface passivation of germanium with the deposition of 2D graphene.

Increase in Schottky Barrier Height in the CoSi2/Si (100) Interface Caused by Hydrogen

1992 ◽  
Vol 281 ◽  
Author(s):  
A. D. Marwick ◽  
M. O. Aboelfotoh ◽  
R. Casparis
Keyword(s):  
Fermi Level ◽  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Interface States ◽  
Hydrogen Atoms ◽  
Fermi Level Pinning ◽  
Gap States

ABSTRACTIt is shown that the presence of 8 × 1015 hydrogen atoms/cm2 in the CoSi2/Si (100) interface causes an increase in the Schottky barrier height of 120 meV, and that passivation of dopants in the substrate is not the cause of this change. The data is evidence that the position of the Fermi level in this interface is controlled by defect-related interface states. After hydrogenation the Schottky barrier height agrees with that predicted by theory for Fermi level pinning by virtual gap states of the silicon.

The influence of Fermi level pinning/depinning on the Schottky barrier height and contact resistance in Ge/CoFeB and Ge/MgO/CoFeB structures

2010 ◽  
Vol 96 (5) ◽  
pp. 052514 ◽  
Author(s):  
Donkoun Lee ◽  
Shyam Raghunathan ◽  
Robert J. Wilson ◽  
Dmitri E. Nikonov ◽  
Krishna Saraswat ◽  
...  
Keyword(s):  
Contact Resistance ◽  
Fermi Level ◽  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Fermi Level Pinning

A Proposed Regrowth Mechanism for the Enhancement of Schottky Barrier Height to N-GAAS

1994 ◽  
Vol 337 ◽  
Author(s):  
C-P. Chen ◽  
Y. A. Chang ◽  
T.F. Kuech
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Gaas Layer ◽  
Dark Field ◽  
Schottky Barriers ◽  
Semiconductor Interface ◽  
Al Content ◽  
Current Voltage ◽  
High Al Content

ABSTRACTA systematic study of the enhancement of Schottky barriers to n-GaAs diodes has been carried out using the Ni-Al binary system. The diodes, Ni2Al3/n-GaAs, Ni2Al3/Ni/n-GaAs, Ni/Al/Ni/n-GaAs and NiAl/Al/Ni/n-GaAs, have been realized by sputter deposition at a base pressure ∼2xl0-7 Torr. A high Schottky barrier height ranging from 0.95 to 0.98 eV (deduced from current-voltage measurements) was observed for all the annealed contacts except for Ni2Al3/n-GaAs contacts. The enhancement of the Schottky barrier height in all the contacts was attributed to the formation of a high Al content (Al,Ga)As layer at the metal/semiconductor interface. The formation of this (Al,Ga)As layer was explained in terms of a regrowth mechanism. In this mechanism, Ni reacts with GaAs initially at low temperatures, forming NixGaAs. The NixGaAs layer is believed to react with the Ni-Al layer to form the (Al,Ga)As layer when subjected to a high temperature annealing. A (200) dark field XTEM image of the annealed contact was used to demonstrate the existence of this (Al,Ga)As phase.

scholarly journals Surge Driven Evolution of Schottky Barrier Height on 4H-SiC JBS Diodes

2018 ◽  
Vol 924 ◽  
pp. 593-596 ◽  
Author(s):  
Besar Asllani ◽  
Jean Baptiste Fonder ◽  
Pascal Bevilacqua ◽  
Dominique Planson ◽  
Luong Viet Phung ◽  
...  
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Barrier Height ◽  
Schottky Contact ◽  
Contact Temperature ◽  
Evolution Rate ◽  
Physical Parameters ◽  
Annealing Temperatures ◽  
Causes Of Failure ◽  
Surge Current

In this paper we will present the results of repetitive surge stress carried out on six 3.3 kV-5A Ti/Ni 4H-SiC JBS diodes. Repetitive current peaks between 10 A and 24 A have been applied and some diodes were able to endure 100,000 cycles while others failed before. The causes of failure have not been determined but a correlation between peak surge current and physical parameters evolution rate has been proven. Simulations show that contact temperature during surge can reach 300 °C, which is very close to Schottky contact annealing temperatures.

scholarly journals The External Electric Field-Induced Tunability of the Schottky Barrier Height in Graphene/AlN Interface: A Study by First-Principles

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1794
Author(s):  
Xuefei Liu ◽  
Zhaocai Zhang ◽  
Bing Lv ◽  
Zhao Ding ◽  
Zijiang Luo
Keyword(s):  
Electric Field ◽  
Schottky Barrier ◽  
External Electric Field ◽  
Barrier Height ◽  
Density Functional ◽  
Schottky Barrier Height ◽  
Schottky Contact ◽  
Valence Band Maximum ◽  
Charge Analysis ◽  
P Type

Graphene-based van der Waals (vdW) heterojunction plays an important role in next-generation optoelectronics, nanoelectronics, and spintronics devices. The tunability of the Schottky barrier height (SBH) is beneficial for improving device performance, especially for the contact resistance. Herein, we investigated the electronic structure and interfacial characteristics of the graphene/AlN interface based on density functional theory. The results show that the intrinsic electronic properties of graphene changed slightly after contact. In contrast, the valence band maximum of AlN changed significantly due to the hybridization of Cp and Np orbital electrons. The Bader charge analysis showed that the electrons would transfer from AlN to graphene, implying that graphene would induce acceptor states. Additionally, the Schottky contact nature can be effectively tuned by the external electric field, and it will be tuned from the p-type into n-type once the electric field is larger than about 0.5 V/Å. Furthermore, the optical absorption of graphene/AlN is enhanced after contact. Our findings imply that the SBH is controllable, which is highly desirable in nano-electronic devices.

Sign in / Sign up

Export Citation Format

Share Document