Characterization of Pb(ScTa)1−xTixO3 (x<0.3) Thin Films Grown on LaNiO3 Coated Si by MOCVD

1998 ◽  
Vol 541 ◽  
Author(s):  
C. H. Lin ◽  
H. C. Kuo ◽  
G. E. Stillman ◽  
Haydn Chen
Keyword(s):  
Thin Films ◽  
Electron Microscope ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
X Ray ◽  
Si Substrates ◽  
Transmission Electron ◽  
Metal Organic

AbstractHighly (100) textured pseudo-cubic Pb(ScTa)1−xTixO3 (x=0-0.3) (PSTT) thin films were grown by metal-organic chemical vapor deposition (MOCVD) on LaNiO3 (LNO) electrode buffered Si substrates at 650 °C. The microstructure and chemical uniformity were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and nanoprobe X-ray energy dispersive spectroscopy (EDS). The temperature dependence of dielectric properties and P-E behavior were measured. A shift of Curie temperature of these PST-based thin films due to Ti addition was demonstrated, Furthermore, the pyroelectric properties of these thin films were estimated.

scholarly journals Properties and Orientation of Antiferroelectric Lead Zirconate Thin Films Grown by MOCVD

1998 ◽  
Vol 541 ◽  
Author(s):  
Nan Chen ◽  
G. R. Bai ◽  
O. Auciello ◽  
R. E. Koritala ◽  
M. T. Lanagan
Keyword(s):  
Thin Films ◽  
Chemical Vapor ◽  
Lead Zirconate ◽  
Dielectric Constants ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
Si Substrates ◽  
Antiferroelectric Phase ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

AbstractSingle-phase polycrystalline PbZrO3 (PZ) thin films, 3000-6000 A thick, have been grown by metal-organic chemical vapor deposition (MOCVD) on (111)Pt/Ti/SiO2/Si substrates at ≍525°C. X-ray diffraction analysis indicated that the PZ films grown on (111)Pt/Ti/SiO2/Si (Pt/Tgi/Si) showed preferred pseudocubic (110) orientation. In contrast, PZ films grown on 150 A thick PbTiO3 (PT) template layers exhibited a pseudocubic (100) preferred orientation, and PZ films deposited on TiO2 template layers consisted of randomly oriented grains. The PZ films grown on Pt/Ti/Si with or without templates exhibited dielectric constants of 120-200 and loss tangents of 0.01-0.0. The PZ films with (110) orientation exhibited an electric-field-inducedtransformation from the antiferroelectric phase to the ferroelectric phase with a polarization of ≍34 µC/cm2, and the energy that was stored during switching was 7.1 J/cm3. The field needed to excite the ferroelectric state and that needed to revert to the antiferroelectric state were 50 and 250 kV/cm, respectively. Relationships between the MOCVD processing and the film microstructure and properties are discussed.

MOCVD Route to the Fabrication of Calcium Copper Titanate (CaCu3Ti4O12) Thin Films

2006 ◽  
Vol 45 ◽  
pp. 1194-1199
Author(s):  
Raffaella Lo Nigro ◽  
Roberta G. Toro ◽  
Graziella Malandrino ◽  
Ignazio L. Fragalà
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
Molten Mixture ◽  
Calcium Copper Titanate ◽  
Novel Approach ◽  
Transmission Electron ◽  
Metal Organic

CaCu3Ti4O12 (CCTO) thin films have been successfully deposited by Metal Organic Chemical Vapor Deposition (MOCVD) technique. A novel approach based on a molten multicomponent precursor source has been applied. The molten mixture consists of the Ca(hfa)2•tetraglyme, Ti(tmhd)2(O-iPr)2, and Cu(tmhd)2 [Hhfa= 1,1,1,5,5,5-hexafluoro-2,4- pentanedione; tetraglyme= 2,5,8,11,14-pentaoxapentadecane; Htmhd= 2,2,6,6-tetramethyl-3,5- heptandione; O-iPr= iso-propoxide] precursors. Film complete structural and morphological characterizations have been carried out using several techniques [X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM)].

Fabrication and Characterization of Stacked Self-Assembled In0.5Ga0.5As/GaAs Quantum Dots Grown by MOCVD

2014 ◽  
Vol 896 ◽  
pp. 215-218
Author(s):  
Didik Aryanto ◽  
Zulkafli Othaman ◽  
A. Khamim Ismail
Keyword(s):  
Quantum Dots ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Metal Organic ◽  
Self Assembled

Stacked self-assembled In0.5Ga0.5As/GaAs quantum dots (QDs) were grown using metal organic chemical vapor deposition (MOCVD). Atomic force microscopy (AFM), transmission electron microscopy (TEM) and high resolution X-ray diffraction (HR-XDR) show the effects of stacking on morphology and structure of QDs. Strains due to the buried QDs affect the shape and alignment of the successive layers. Capping of these QDs also determine the quality of the top most QDs structure.

Epitaxial and Conductive RuO2 Thin Films Grown on MgO and LaAlO3 by MOCVD

1998 ◽  
Vol 541 ◽  
Author(s):  
P. Lu ◽  
S. He ◽  
F. X. Li ◽  
Q. X. Jia
Keyword(s):  
Thin Films ◽  
Orientation Relationship ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Microstructural Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

AbstractConductive RuO2 thin films have been grown epitaxially on (100) MgO and (100) LaAlO3 substrates by metal-organic chemical vapor deposition(MOCVD) at different temperatures. The microstructural properties of the RuO2 films have been studied using x-ray diffraction and scanning electron microscopy. Different growth and microstructure properties were observed for the films deposited on the two substrates. The films on MgO are epitaxial at deposition temperatures as low as 350°C, and consist of two variants with an orientation relationship given by (110) RuO2 /(100) MgO and [001] RuO2//[011]MgO. The films on LaAlO3, on the other hand, are epitaxial only at deposition temperatures of 600°C and above, and contain four variants with an orientation relationship given by (200)RuO2//(100)LaAlO3 and [011] RuO2//[011] LaAlO3. The observed microstructures of epitaxially grown films can be explained based on geometric considerations for the films and substrates.

Deposition of Superconducting Tl-Ba-Ca-Cu-O Phases on Metal Foils by Metal-Organic Chemical Vapor Deposition

1992 ◽  
Vol 275 ◽  
Author(s):  
D. L. Schulzi ◽  
B. Hano ◽  
D. Neumayer ◽  
B. J. Hinds ◽  
T. J. Markst ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metal Foils ◽  
Metal Organic ◽  
Organic Chemical Vapor Deposition

ABSTRACTThe synthesis of superconducting Tl-Ba-Ca-Cu-O thin films on metal foils (Au and Ag) by metal-organic chemical vapor deposition (MOCVD) has been investigated. Ba-Ca-Cu-O-(F) films are first prepared via MOCVD using fluorinated “second generation” metal-organic precursors. After an intermediate anneal with water vapor-saturated oxygen to promote removal of F, Tl is introduced by annealing in the presence of a mixture of oxides (Tl2O3, BaO, CaO, CuO) of a specific composition. Characterization of the thin films by scanning electron microscopy, EDX, x-ray diffraction, and variable temperature magnetization measurements has been carried out. High temperature superconductor (HTS) films of Tl2Ba2Ca1Cu2O8−x on Au foil exhibit a magnetically derived Tc = 80K and a high degree of texturing with the crystallite c-axes oriented perpendicular to the substrate surface as evidenced by enhanced (000 x-ray diffraction reflections. Thin film coverage on Ag foil becomes non-contiguous during the (Tl2O3, BaO, CaO, CuO) mixture anneal.

AlxGa1-xN-Based Materials and Heterostructures

1996 ◽  
Vol 449 ◽  
Author(s):  
P. Kung ◽  
A. Saxler ◽  
D. Walker ◽  
X. Zhang ◽  
R. Lavado ◽  
...  
Keyword(s):  
Chemical Vapor ◽  
Bragg Reflectors ◽  
X Ray Diffraction ◽  
Chemical Vapor Deposition Growth ◽  
X Ray ◽  
Sapphire Substrates ◽  
Transmission Electron ◽  
Dimensional Electron Gas ◽  
P Type

ABSTRACTWe present the metalorganic chemical vapor deposition growth, n-type and p-type doping and characterization of AlxGa1-xN alloys on sapphire substrates. We report the fabrication of Bragg reflectors and the demonstration of two dimensional electron gas structures using AlxGa1-xN high quality films. We report the structural characterization of the AlxGa1-xN / GaN multilayer structures and superlattices through X-ray diffraction and transmission electron microscopy. A density of screw and mixed threading dislocations as low as 107 cm-2 was estimated in AlxGa1-xN / GaN structures. The realization of AlxGa1-xN based UV photodetectors with tailored cut-off wavelengths from 365 to 200 nm are presented.

Characterization of Highly Textured PZT Thin Films Grown on LaNiO3 Coated Si Substrates by MOCVD

1997 ◽  
Vol 493 ◽  
Author(s):  
C. H. Lin ◽  
B. M. Yen ◽  
Haydn Chen ◽  
T. B. Wu ◽  
H. C. Kuo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Fatigue Behavior ◽  
Chemical Vapor ◽  
Dielectric Constants ◽  
Preferential Orientation ◽  
Organic Chemical ◽  
Pzt Thin Films ◽  
Si Substrates ◽  
Transmission Electron

ABSTRACTHighly textured PbZrxTi1−xO3 (PZT) thin films with x= 0-0.6 were grown on LaNiO3 coated Si substrates at 600 °C by metal-organic chemical vapor deposition (MOCVD). The preferred crystalline orientation of PZT thin films with various Zr concentration were characterized by X-ray diffraction (XRD). Microstructures were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The dielectric constants, hysteresis and fatigue behavior of these thin films were also measured. The relationship between growth rate and the preferential orientation is discussed. Furthermore, the dependence of the electrical properties on Zr concentration and preferential orientation is demonstrated.

Sign in / Sign up

Export Citation Format

Share Document