The Strength and Fracture of Passive Oxide Films on Metals

1999 ◽  
Vol 594 ◽  
Author(s):  
M. Pang ◽  
D. E. Wilson ◽  
D. F. Bahr
Keyword(s):  
Anodic Polarization ◽  
Reference Electrode ◽  
Maximum Tensile Stress ◽  
Passive Films ◽  
Applied Potential ◽  
Force Microscopy ◽  
Nanomechanical Properties ◽  
Electrochemical Testing ◽  
Atomic Force

AbstractPassive films have been grown electrochemically on a polycrystalline titanium alloy. By varying the applied voltages, the film thickness is varied. A testing apparatus has been constructed to allow measurements of nanomechanical properties during electrochemical testing using a Ag/AgCl reference electrode in a traditional three-electrode potentiostatic scan. The stress at which oxide film fracture occurs is correlated to the applied potential. Observations of in situ film fracture measurements on single grains during immersion show the strength of the film remains constant in environments in which the film is inert, but decreases by approximately 20% in solutions which lead to corrosion. The fracture mode of the oxide has been observed using atomic force microscopy, and is shown to qualitatively match the largest tensile stresses which develop using elastic contact mechanics. A simplified model for determining the maximum tensile stress around an indentation is presented, and is used to show the stress required for fracture increases approximately linearly with increasing applied anodic polarization, from 850 MiPa to approximately 3 GPa for applied potentials between 1 and 9 V.

In situ nanomechanical properties of natural oil bodies studied using atomic force microscopy

2020 ◽  
Vol 570 ◽  
pp. 362-374 ◽  
Author(s):  
Nan Yang ◽  
Chunxia Su ◽  
Yuemei Zhang ◽  
Junji Jia ◽  
Robert L. Leheny ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Oil Bodies ◽  
Force Microscopy ◽  
Nanomechanical Properties ◽  
Atomic Force ◽  
Natural Oil

scholarly journals Ultrafine metal-polymer catalysts based on polyconjugated systems for Fisher–Tropsch synthesis

2020 ◽  
Vol 92 (6) ◽  
pp. 977-984
Author(s):  
Mayya V. Kulikova ◽  
Albert B. Kulikov ◽  
Alexey E. Kuz’min ◽  
Anton L. Maximov
Keyword(s):  
Tropsch Synthesis ◽  
X Ray Diffraction ◽  
Fischer Tropsch ◽  
Force Microscopy ◽  
Composite Catalysts ◽  
Fe Catalyst ◽  
Atomic Force ◽  
And Function ◽  
Metal Polymer

AbstractFor previously studied Fischer–Tropsch nanosized Fe catalyst slurries, polymer compounds with or without polyconjugating structures are used as precursors to form the catalyst nanomatrix in situ, and several catalytic experiments and X-ray diffraction and atomic force microscopy measurements are performed. The important and different roles of the paraffin molecules in the slurry medium in the formation and function of composite catalysts with the two types of aforementioned polymer matrices are revealed. In the case of the polyconjugated polymers, the alkanes in the medium are “weakly” coordinated with the metal-polymer composites, which does not affect the effectiveness of the polyconjugated polymers. Otherwise, alkane molecules form a “tight” surface layer around the composite particles, which create transport complications for the reagents and products of Fischer-Tropsch synthesis and, in some cases, can change the course of the in situ catalyst formation.

Atomic force microscopy of in situ deformed nickel thin films

1999 ◽  
Vol 353 (1-2) ◽  
pp. 194-200 ◽  
Author(s):  
C. Coupeau ◽  
J.F. Naud ◽  
F. Cleymand ◽  
P. Goudeau ◽  
J. Grilhé
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Force Microscopy ◽  
Nickel Thin Films ◽  
Atomic Force

scholarly journals Degradation Mechanism of Porous Metal-Organic Frameworks by In Situ Atomic Force Microscopy

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 722
Author(s):  
Ioanna Christodoulou ◽  
Tom Bourguignon ◽  
Xue Li ◽  
Gilles Patriarche ◽  
Christian Serre ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Degradation Mechanism ◽  
Metal Organic Frameworks ◽  
Porous Metal ◽  
Force Microscopy ◽  
Atomic Force ◽  
Metal Organic ◽  
The Media ◽  
Ph Conditions

In recent years, Metal-Organic Frameworks (MOFs) have attracted a growing interest for biomedical applications. The design of MOFs should take into consideration the subtle balance between stability and biodegradability. However, only few studies have focused on the MOFs’ stability in physiological media and their degradation mechanism. Here, we investigate the degradation of mesoporous iron (III) carboxylate MOFs, which are among the most employed MOFs for drug delivery, by a set of complementary methods. In situ AFM allowed monitoring with nanoscale resolution the morphological, dimensional, and mechanical properties of a series of MOFs in phosphate buffer saline and in real time. Depending on the synthetic route, the external surface presented either well-defined crystalline planes or initial defects, which influenced the degradation mechanism of the particles. Moreover, MOF stability was investigated under different pH conditions, from acidic to neutral. Interestingly, despite pronounced erosion, especially at neutral pH, the dimensions of the crystals were unchanged. It was revealed that the external surfaces of MOF crystals rapidly respond to in situ changes of the composition of the media they are in contact with. These observations are of a crucial importance for the design of nanosized MOFs for drug delivery applications.

Sign in / Sign up

Export Citation Format

Share Document