Synthesis by Self-Assembly of Iron-Cobalt Nanoalloys

2002 ◽  
Vol 739 ◽  
Author(s):  
Melissa A. Zubris ◽  
Rina Tannenbaum

ABSTRACTIn this paper we are proposing the synthesis of iron and cobalt nanoalloys via the codecomposition of iron and cobalt carbonyl precursors in the presence of polystyrene as the surface stabilizing agent. In order to form iron-cobalt nanoalloys with no preferential aggregation of metal atoms resulting in phase segregation, the decomposition kinetics of the iron pentacarbonyl and dicobalt octacarbonyl precursors had to be firmly established. The kinetics of cobalt cluster formation has been thoroughly investigated, but data for iron pentacarbonyl decomposition is relatively scarce. To fully understand the formation of the iron nanoclusters, a kinetic study was performed by varying carbonyl concentrations and reaction media in order to establish reaction order and rate constants. Our results suggest this decomposition to be a higher order process (not first order as previously assumed), with a complicated intermediate mechanism, which has been postulated and experimentally verified. By using this kinetic data, we will be able to predict the necessary conditions for the creation of new in-situ iron-cobalt nanoalloys using carbonyl precursors.

2019 ◽  
Author(s):  
Hao Wu ◽  
Jeffrey Ting ◽  
Siqi Meng ◽  
Matthew Tirrell

We have directly observed the <i>in situ</i> self-assembly kinetics of polyelectrolyte complex (PEC) micelles by synchrotron time-resolved small-angle X-ray scattering, equipped with a stopped-flow device that provides millisecond temporal resolution. This work has elucidated one general kinetic pathway for the process of PEC micelle formation, which provides useful physical insights for increasing our fundamental understanding of complexation and self-assembly dynamics driven by electrostatic interactions that occur on ultrafast timescales.


2014 ◽  
Vol 25 (12) ◽  
pp. 1441004 ◽  
Author(s):  
Giuseppe Gonnella ◽  
Antonio Lamura ◽  
Antonio Suma

A systems of self-propelled dumbbells interacting by a Weeks–Chandler–Anderson potential is considered. At sufficiently low temperatures the system phase separates into a dense phase and a gas-like phase. The kinetics of the cluster formation and the growth law for the average cluster size are analyzed.


2005 ◽  
pp. 2384 ◽  
Author(s):  
Plinio Innocenzi ◽  
Luca Malfatti ◽  
Tongjit Kidchob ◽  
Paolo Falcaro ◽  
Mariangela Cestelli Guidi ◽  
...  

2020 ◽  
Author(s):  
Susanne Seibt ◽  
Timothy Ryan

With the advent of new in situ structural characterisation techniques including X-ray scattering, there has been an increased interest in investigations of the reaction kinetics of nucleation and growth of nanoparticles as well as self-assembly processes. In this chapter, we discuss the applications of microfluidic devices specifically developed for the investigation of time resolved analysis of growth kinetics and structural evolution of nanoparticles and nanofibers. We focus on the design considerations required for spectrometry and SAXS analysis, the advantages of using a combination of SAXS and microfluidics for these measurements, and discuss in an applied fashion the use of these devices for time-resolved research.


2000 ◽  
Vol 648 ◽  
Author(s):  
M. Yakimov ◽  
V. Tokranov ◽  
S. Oktyabrsky

AbstractWe have studied the formation of InAs quantum dots (QDs) grown by molecular beam epitaxy on top of GaAs and 2 ML-thick AlAs layers in the temperature range from 350 to 500°C. In-situ reflection high energy electron diffraction (RHEED) patterns were recorded in real time during the growth and analyzed to characterize the 2D-to-3D transition on the surface, including QD formation, and ripening process. The kinetics of QD formation was studied using the InAs growth rates ranging from 0.01 to 1 ML/s and different ratios of As2/In fluxes. RHEED patterns and ex-situ atomic force microscopy images were analyzed to reveal the development of sizes and shapes of the single-layer and stacked QD ensembles. The critical InAs coverage for QD formation was shown to be consistently higher for dots grown on the AlAs overlayer than for those grown on GaAs surface. Self-assembly of multilayer QD stacks revealed the reduction of the critical thickness for dots formed in the upper layers.


2016 ◽  
Vol 15 (7) ◽  
pp. 775-781 ◽  
Author(s):  
Mark C. Weidman ◽  
Detlef-M. Smilgies ◽  
William A. Tisdale

Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.


Author(s):  
J. Drucker ◽  
R. Sharma ◽  
J. Kouvetakis ◽  
K.H.J. Weiss

Patterning of metals is a key element in the fabrication of integrated microelectronics. For circuit repair and engineering changes constructive lithography, writing techniques, based on electron, ion or photon beam-induced decomposition of precursor molecule and its deposition on top of a structure have gained wide acceptance Recently, scanning probe techniques have been used for line drawing and wire growth of W on a silicon substrate for quantum effect devices. The kinetics of electron beam induced W deposition from WF6 gas has been studied by adsorbing the gas on SiO2 surface and measuring the growth in a TEM for various exposure times. Our environmental cell allows us to control not only electron exposure time but also the gas pressure flow and the temperature. We have studied the growth kinetics of Au Chemical vapor deposition (CVD), in situ, at different temperatures with/without the electron beam on highly clean Si surfaces in an environmental cell fitted inside a TEM column.


Author(s):  
R-R. Lee

Partially-stabilized ZrO2 (PSZ) ceramics have considerable potential for advanced structural applications because of their high strength and toughness. These properties derive from small tetragonal ZrO2 (t-ZrO2) precipitates in a cubic (c) ZrO2 matrix, which transform martensitically to monoclinic (m) symmetry under applied stresses. The kinetics of the martensitic transformation is believed to be nucleation controlled and the nucleation is always stress induced. In situ observation of the martensitic transformation using transmission electron microscopy provides considerable information about the nucleation and growth aspects of the transformation.


Sign in / Sign up

Export Citation Format

Share Document