Formation of a miscibility gap in laser-crystallized poly-SiGe thin films

2005 ◽  
Vol 862 ◽  
Author(s):  
M. Weizman ◽  
N. H. Nickeal ◽  
I. Sieber ◽  
B. Yan
Keyword(s):  
Thin Films ◽  
Silicon Germanium ◽  
Polycrystalline Silicon ◽  
Miscibility Gap ◽  
Phonon Modes ◽  
X Ray ◽  
Average Value ◽  
Glass Substrates ◽  
Mode Splitting ◽  
Lateral Segregation

AbstractLaser-crystallized polycrystalline silicon-germanium (poly-SiGe) thin films on glass substrates were characterized with energy dispersive X-ray and Raman spectroscopy. In the course of the crystallization strong lateral segregation occurs for laser-crystallized poly-Si1-xGex with 0.33 < x < 0.7, causing the local Ge content to differ by as much as 40 % from the average value. The segregation manifests itself in the appearance of well-resolved peaks in the Raman phonon modes. This mode splitting in the Raman spectra is interpreted as the formation of well defined alloy phases with a miscibility gap in between.

X- ray diffraction and dielectric properties of PbSe thin films

2019 ◽  
Vol 15 (34) ◽  
pp. 1-14
Author(s):  
Bushra A. Hasan
Keyword(s):  
Thin Films ◽  
Thermal Activation ◽  
Thermal Evaporation ◽  
Thermal Activation Energy ◽  
Dielectric Constants ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Thermal Evaporation Method ◽  
X Ray ◽  
Glass Substrates

Lead selenide PbSe thin films of different thicknesses (300, 500, and 700 nm) were deposited under vacuum using thermal evaporation method on glass substrates. X-ray diffraction measurements showed that increasing of thickness lead to well crystallize the prepared samples, such that the crystallite size increases while the dislocation density decreases with thickness increasing. A.C conductivity, dielectric constants, and loss tangent are studied as function to thickness, frequency (10kHz-10MHz) and temperatures (293K-493K). The conductivity measurements confirm confirmed that hopping is the mechanism responsible for the conduction process. Increasing of thickness decreases the thermal activation energy estimated from Arhinus equation is found to decrease with thickness increasing. The increase of thickness lead to reduce the polarizability α while the increasing of temperature lead to increase α.

scholarly journals Reactive Dual Magnetron Sputtering: A Fast Method for Preparing Stoichiometric Microcrystalline ZnWO4 Thin Films

Surfaces ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 106-114
Author(s):  
Yannick Hermans ◽  
Faraz Mehmood ◽  
Kerstin Lakus-Wollny ◽  
Jan P. Hofmann ◽  
Thomas Mayer ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Fast Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Post Annealing ◽  
Rf Signal ◽  
First Time

Thin films of ZnWO4, a promising photocatalytic and scintillator material, were deposited for the first time using a reactive dual magnetron sputtering procedure. A ZnO target was operated using an RF signal, and a W target was operated using a DC signal. The power on the ZnO target was changed so that it would match the sputtering rate of the W target operated at 25 W. The effects of the process parameters were characterized using optical spectroscopy, X-ray diffraction, and scanning electron microscopy, including energy dispersive X-ray spectroscopy as well as X-ray photoelectron spectroscopy. It was found that stoichiometric microcrystalline ZnWO4 thin films could be obtained, by operating the ZnO target during the sputtering procedure at a power of 55 W and by post-annealing the resulting thin films for at least 10 h at 600 °C. As FTO coated glass substrates were used, annealing led as well to the incorporation of Na, resulting in n+ doped ZnWO4 thin films.

scholarly journals Effect of Halogen on the Structure of Low Temperature Polycrystalline Silicon Thin Films Fabricated on Glass Substrates.

1999 ◽  
Vol 107 (1251) ◽  
pp. 1099-1104 ◽  
Author(s):  
Toshio KAMIYA ◽  
Yoshiteru MAEDA ◽  
Kouichi NAKAHATA ◽  
Takashi KOMARU ◽  
Charles M. FORTMANN ◽  
...  
Keyword(s):  
Thin Films ◽  
Low Temperature ◽  
Polycrystalline Silicon ◽  
Glass Substrates ◽  
Silicon Thin Films

Effect of Substrate Temperature on the Electrochromic Properties of Cobalt Hydroxide Thin Films Prepared by Reactive Sputtering

2011 ◽  
Vol 1328 ◽  
Author(s):  
KyoungMoo Lee ◽  
Yoshio Abe ◽  
Midori Kawamura ◽  
Hidenobu Itoh
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Indium Tin Oxide ◽  
Large Change ◽  
Amorphous Structure ◽  
Cobalt Hydroxide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Substrate Temperatures

ABSTRACTCobalt hydroxide thin films with a thickness of 100 nm were deposited onto glass, Si and indium tin oxide (ITO)-coated glass substrates by reactively sputtering a Co target in H2O gas. The substrate temperature was varied from -20 to +200°C. The EC performance of the films was investigated in 0.1 M KOH aqueous solution. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy of the samples indicated that Co3O4 films were formed at substrate temperatures above 100°C, and amorphous CoOOH films were deposited in the range from 10 to -20°C. A large change in transmittance of approximately 26% and high EC coloration efficiency of 47 cm2/C were obtained at a wavelength of 600 nm for the CoOOH thin film deposited at -20°C. The good EC performance of the CoOOH films is attributed to the low film density and amorphous structure.

Chemical Bath Deposition of Lead Sulphide (PbS) Thin Film and their Characterization

2013 ◽  
Vol 209 ◽  
pp. 111-115 ◽  
Author(s):  
Sandip V. Bhatt ◽  
M.P. Deshpande ◽  
Bindiya H. Soni ◽  
Nitya Garg ◽  
Sunil H. Chaki
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Raman Spectroscopy ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Excitation Wavelength ◽  
Face Centered Cubic ◽  
Phonon Modes ◽  
Lead Sulphide ◽  
X Ray

Thin film deposition of PbS is conveniently carried out by chemical reactions of lead acetate with thiourea at room temperature. Energy dispersive analysis of X-ray (EDAX), X-ray diffraction (XRD), selected area electron diffraction patterns (SAED), UV-Vis-NIR spectrophotometer, Scanning Electron Microscopy (SEM), Atomic force microscopy (AFM), Photoluminescence (PL) and Raman spectroscopy techniques are used for characterizing thin films. EDAX spectra shows that no impurity is present and XRD pattern indicates face centered cubic structure of PbS thin films. The average crystallite size obtained using XRD is about 15nm calculated using Scherrer’s formula and that determined from Hall-Williamson plot was found to be 18nm. SAED patterns indicate that the deposited PbS thin films are polycrystalline in nature. Blue shift due to quantum confinement was seen from the UV-Vis-NIR absorption spectra of thin film in comparison with bulk PbS. The Photoluminescence spectra obtained for thin film with different excitation sources shows sharp emission peaks at 395nm and its intensity of photoluminescence increases with increasing the excitation wavelength. Raman spectroscopy of deposited thin film was used to study the optical phonon modes at an excitation wavelength of 488nm using (Ar+) laser beam.

scholarly journals Comparative Study of ZnO Thin Films Grown on Quartz Glass and Sapphire (001) Substrates by Means of Magnetron Sputtering and High-Temperature Annealing

2019 ◽  
Vol 9 (21) ◽  
pp. 4509
Author(s):  
Weijia Yang ◽  
Fengming Wang ◽  
Zeyi Guan ◽  
Pengyu He ◽  
Zhihao Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
High Temperature ◽  
Magnetron Sputtering ◽  
Comparative Study ◽  
Quartz Glass ◽  
Photoelectron Spectroscopy ◽  
Zno Thin Films ◽  
High Temperature Annealing ◽  
X Ray ◽  
Glass Substrates

In this work, we reported a comparative study of ZnO thin films grown on quartz glass and sapphire (001) substrates through magnetron sputtering and high-temperature annealing. Firstly, the ZnO thin films were deposited on the quartz glass and sapphire (001) substrates in the same conditions by magnetron sputtering. Afterwards, the sputtered ZnO thin films underwent an annealing process at 600 °C for 1 h in an air atmosphere to improve the quality of the films. X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectra, photoluminescence spectra, and Raman spectra were used to investigate the structural, morphological, electrical, and optical properties of the both as-received ZnO thin films. The ZnO thin films grown on the quartz glass substrates possess a full width of half maximum value of 0.271° for the (002) plane, a surface root mean square value of 0.50 nm and O vacancies/defects of 4.40% in the total XPS O 1s peak. The comparative investigation reveals that the whole properties of the ZnO thin films grown on the quartz glass substrates are comparable to those grown on the sapphire (001) substrates. Consequently, ZnO thin films with high quality grown on the quartz glass substrates can be achieved by means of magnetron sputtering and high-temperature annealing at 600 °C.

Electron spin resonance in laser-crystallized polycrystalline silicon-germanium thin films

2010 ◽  
Vol 207 (3) ◽  
pp. 570-573 ◽  
Author(s):  
M. Weizman ◽  
L.-P. Scheller ◽  
N. H. Nickel ◽  
K. Lips ◽  
B. Yan
Keyword(s):  
Thin Films ◽  
Electron Spin Resonance ◽  
Electron Spin ◽  
Silicon Germanium ◽  
Polycrystalline Silicon ◽  
Spin Resonance

The Effect of Plasma Power on the Properties of Amorphous Silicon-Germanium Thin Films

2011 ◽  
Vol 317-319 ◽  
pp. 341-344
Author(s):  
Long Gu ◽  
Hui Dong Yang ◽  
Bo Huang
Keyword(s):  
Thin Films ◽  
Amorphous Silicon ◽  
Deposition Rate ◽  
Silicon Germanium ◽  
Structural Characteristics ◽  
Chemical Vapor ◽  
Plasma Power ◽  
Glass Substrates ◽  
Frequency Plasma ◽  
Amorphous Silicon Germanium

Amorphous Silicon-germanium films were prepared by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) on glass substrates. The structural characteristics, deposition rate, photosensitivity, and optical band gap of the silicon-germanium thin films were investigated with plasma power varying from 15W to 45W. The deposition rate increased within a certain range of plasma power. With the plasma power increasing, the photosensitivity of the thin films decreased. It is evident that varying the plasma power changes the deposition rate, photosensitivity, which was fundamentally crucial for the fabrication of a-Si/a-SiGe/a-SiGe stacked solar cells. For our deposition system, the most optimization value was 30-35W.

Electrochemical Deposition and Characterization of Cd-Fe-Se Thin Films

2009 ◽  
Vol 68 ◽  
pp. 69-76 ◽  
Author(s):  
S. Thanikaikarasan ◽  
T. Mahalingam ◽  
K. Sundaram ◽  
Tae Kyu Kim ◽  
Yong Deak Kim ◽  
...  
Keyword(s):  
Thin Films ◽  
Hexagonal Structure ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Iron Selenide ◽  
Glass Substrates ◽  
Diffraction Patterns ◽  
Cadmium Iron Selenide ◽  
Deposited Films

Cadmium iron selenide (Cd-Fe-Se) thin films were deposited onto tin oxide (SnO2) coated conducting glass substrates from an aqueous electrolytic bath containing CdSO4, FeSO4 and SeO2 by potentiostatic electrodeposition. The deposition potentials of Cadmium (Cd), Iron (Fe), Selenium (Se) and Cadmium-Iron-Selenide (Cd-Fe-Se) were determined from linear cathodic polarization curves. The deposited films were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive analysis by x-rays (EDX) and optical absorption techniques, respectively. X-ray diffraction patterns shows that the deposited films are found to be hexagonal structure with preferential orientation along (100) plane. The effect of FeSO4 concentration on structural, morphological, compositional and optical properties of the films are studied and discussed in detail.

Influence of Deposition Time and Source-Substrate Distance on Properties of CdTe Thin Films Using Close-Spaced Sublimation at Higher Source Temperature

2013 ◽  
Vol 716 ◽  
pp. 325-327
Author(s):  
Xiao Yan Dai ◽  
Cheng Wu Shi ◽  
Yan Ru Zhang ◽  
Min Yao
Keyword(s):  
Thin Films ◽  
Deposition Time ◽  
Near Infrared ◽  
Soda Lime ◽  
Soda Lime Glass ◽  
X Ray ◽  
Source Temperature ◽  
Glass Substrates ◽  
Substrate Distance ◽  
Cdte Thin Films

In this paper, CdTe thin films were deposited on soda-lime glass substrates using CdTe powder as a source by close-spaced sublimation at higher source temperature of 700°C. The influence of the deposition time and the source-substrate distance on the chemical composition, crystal phase, surface morphology and optical band gap of CdTe thin films was systemically investigated by energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscope and the ultraviolet-visible-near infrared absorption spectra, respectively. At the deposition time of 60 min and the source-substrate distance of 5 mm, the CdTe thin films had pyramid appearance with the grain size of 15 μm.

Sign in / Sign up

Export Citation Format

Share Document