scholarly journals Genotypic variation of agronomic traits as well as concentrations of Fe, Zn, P and phytate in soybean cultivars

Revista CERES ◽  
2016 ◽  
Vol 63 (3) ◽  
pp. 403-411 ◽  
Author(s):  
Nilma Portela Oliveira ◽  
Valdemar Faquin ◽  
Alisson Lucrécio da Costa ◽  
Kalynka Gabriella do Livramento ◽  
Paulo Jorge de Pinho ◽  
...  
Keyword(s):  
Plant Height ◽  
Agronomic Traits ◽  
Block Design ◽  
Genotypic Variation ◽  
World Population ◽  
Nutritional Factors ◽  
Soybean Cultivars ◽  
Randomized Block Design ◽  
The Relationship ◽  
Edible Parts

ABSTRACT The staple diet of most of the world population is provided by cereal, which present levels of iron (Fe) and zinc (Zn) below the nutritional demand of humans. Other factors that may substantially interfere for the low intake of Fe and Zn are the anti- nutritional factors present in the edible parts of plants, such as heavy metals and phytate. Hence, the objective of this study was to evaluate the genotypic variation in terms of yield (kg ha-1), plant height, insertion height of first pod, as well as concentrations of Fe, Zn, phosphorus (P) and the anti-nutrient phytate in grains of 24 soybean cultivars and to identify cultivars with potential for biofortification. The field experiment was conducted in Rio Verde, state of Goiás by the technological center of COMIGO. The experimental design used in the study was a randomized block design with 24 treatments and three replications. The results showed that there is genotypic variation for grain yield (kg ha-1), plant height, and insertion height of first pod, as well as for the concentrations of Zn, Fe, P and concentration of anti-nutient phytate in grains among the soybean cultivars. Non-significant or low correlations were found among the evaluated parameters except for the relationship between P and phytate (r=0.733). The diversity found among soybean cultivars offers genotypes such as 8197RR, M 7908RR and BRS 262 with potential to develop cultivars with better ability to accumulate nutrients in grains.

scholarly journals Planting Density and Soybean (Glycine max L.) Cultivars Effects on Yield Components in the Amazon

2020 ◽  
Vol 8 (3) ◽  
pp. 63
Author(s):  
Priscila Pereira Sacramento ◽  
Letícia Cunha da Hungria ◽  
Jamil Chaar El-Husny ◽  
Luis De Souza Freitas
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Block Design ◽  
Planting Density ◽  
Maximum Height ◽  
Soybean Cultivars ◽  
Linear Behavior ◽  
Randomized Block Design ◽  
Glycine Max L

The aim of this study was to evaluate the influence of planting density and cultivar of soybean on yield components in the southeast Amazon. The experiment was carried out in an Oxisol, with a randomized block design in a 2 x 4 factorial scheme. The treatments were two soybean cultivars (BRS 9090 RR and BRS 8990 RR) and four planting densities (13, 15, 18 and 20 plants m-1), with three replications. First pod insertion height (IFP), plant height (H), number of pods per plant (NPP), grain yield (Y) and weight of 100 grains (W100) were evaluated. The insertion height of the first pod showed a tendency of increase with the increment of plants per linear meter for cultivar BRS 8990 RR, different of the behavior observed for the cultivar BRS 9090 RR, which only showed difference when the density of 300.000 plants ha-1 was tested. For plant height, among soybean cultivars, there was only difference in D400, with BRS 8990 RR showing a maximum height of 83.3 cm, 21% higher than BRS 9090 RR. When evaluated under D350, BRS 8990 RR showed an increase of 13% in the number of pods compared to BRS 9090 RR. Both cultivars showed linear behavior for the grain yield, increasing according the plant population, with the highest grain yield obtained under the density of 400.000 plants ha-1 (4527.3 kg ha-1). The weight of 100 grains was not influenced by any variation factor.

scholarly journals Correlations and path analysis in agronomic traits of soybeans under defoliation

2020 ◽  
Vol 36 (5) ◽  
Author(s):  
Alan Mario Zuffo ◽  
Francisco de Alcântara Neto ◽  
Tiago Zoz ◽  
Rafael Felippe Ratke ◽  
Jorge González Aguilera ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Agronomic Traits ◽  
Block Design ◽  
Indirect Selection ◽  
Additional Treatment ◽  
Leaf Damage ◽  
Thousand Grain Weight ◽  
Randomized Block Design ◽  
Selection For

 Stress events or leaf damage can alter the redistribution of photoassimilates and modify the morphological traits directly related to grain yield. This study aimed to evaluate the influence of agronomic traits on grain yield in soybean crop in function of leaf defoliation. The experiment consisted of a randomized block design with three replications, arranged in a 6 x 3 + 1 factorial scheme. The factors were composed by six reprodutive stages (R1, R2, R3, R4, R5, and R6) and three defoliation levels (33%, 66%, and 99%), and one additional treatment without defoliation (control). The following traits were evaluated: plant height, number of pods per plant, number of grains per pod, thousand grain weight, and grain yield. The magnitudes of the correlations between the same traits showed high oscillation according to the defoliation level. Results revealed the potential for the indirect selection for grain yield by the traits plant height and number of grains per pods under 0% of defoliation and by the trait number of pods per plant under 33% of defoliation.

scholarly journals Vegetative and productive performance of two soybean cultivars at different plant densities

2021 ◽  
Vol 7 ◽  
pp. 1-12
Author(s):  
Gustavo Lourenço Bomtempo ◽  
Éder Matsuo ◽  
Mario Carmo Oda
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Spatial Arrangement ◽  
Plant Population ◽  
Productive Performance ◽  
Soybean Cultivars ◽  
Randomized Block Design ◽  
Plant Densities ◽  
Set Up ◽  
Number Of Branches

The spatial arrangement and plant population have been highlighted as fundamental tools for increasing productivity. The objective was to evaluate the vegetative and productive performance of two soybean cultivars at different plant densities. Seeds of soybean cultivars (TMG 7063 IPRO and BS 2606 IPRO), recommended for the Alto Paranaíba region in the state Minas Gerais, were used and sown at seven different densities (8, 10, 12, 14, 16, 18 and 20 plants meter-1, equivalent to 160, 200, 240, 280, 280, 320, 360 and 400 thousand plants hectare-1, where they were evaluated in the development stages R1 (plant height) and R8 (height of the insertion of the first pod, plant height, number of nodes, number of branches, productivity per plant and productivity per hectare). The experiment was set up according to a randomized block design, in the factorial scheme A x B, being factor A composed by the cultivars and factor B by plant densities with three repetitions (blocks). Increased plant population resulted in greater first pod insertion height and final plant height, fewer nodes and branches and the average yield per hectare increased linearly, with the TMG 7063 IPRO cultivar being more productive under these conditions (52.7 bags of 60 kg per hectare).

scholarly journals Correlations and path analysis in soybean progenies with resistance source to cyst nematode (race 3)

2019 ◽  
Vol 10 (1) ◽  
pp. 168-175
Author(s):  
Daniela Sarti Dvorjak ◽  
Sandra Helena Unêda-Trevisoli ◽  
Wallace De Sousa Leite ◽  
Alysson Jalles da Silva ◽  
Fabiana Mota da Silva ◽  
...  
Keyword(s):  
Grain Yield ◽  
Path Analysis ◽  
Agronomic Traits ◽  
Block Design ◽  
Correlation Coefficients ◽  
Randomized Block Design ◽  
Important Study ◽  
Genotypic Correlations ◽  
The Relationship ◽  
Number Of Seeds

Path analysis is an important study that slices the correlation coefficients between two variables to evaluate whether the relationship between them is of cause and effect. This study aimed to estimate the phenotypic and genotypic correlations between agronomic traits and perform a path analysis in order to identify variables for indirect selection aiming at a higher grain yield. Fourteen soybean F6 lines from the soybean breeding program of FCAV–UNESP, Jaboticabal, São Paulo, Brazil, were analyzed. The experimental design was a randomized block design with three replications. The agronomic traits plant height at maturity (PHM), first pod height (FPH), lodging (Ld), agronomic value (AV), number of pods per plant (NP), number of seeds per plant (NS), and grain yield (GY) were evaluated. Overall, the genotypic correlations were higher than their corresponding phenotypic correlations. The genotypic correlations between grain yield and the traits agronomic value, number of pods per plant, and number of seeds per plant were positive, significant, and of high magnitude. Path analysis showed that the trait number of seeds per plant had the highest direct effect on grain yield, while the trait number of pods per plant had the highest indirect effect through the number of seeds per plant on grain yield

scholarly journals Karakter Agronomi Dan Satuan Panas Padi Varietas Unggul Pada Berbagai Dosis Nitrogen Di Lahan Pasang Surut

2020 ◽  
Vol 16 (1) ◽  
pp. 95
Author(s):  
Nur I. Ariyani ◽  
Dewi E. Adriani ◽  
Gusti Rusmayadi
Keyword(s):  
Plant Height ◽  
Agronomic Traits ◽  
Block Design ◽  
Dry Weight ◽  
Limiting Factor ◽  
Large Area ◽  
Rice Varieties ◽  
N Concentration ◽  
Randomized Block Design ◽  
Number Of Leaves

Rice is the staple food of Indonesian people and part of the world community. Indonesia, with a population growth rate of around 1.3-1.5% per year, requires additional rice production of about 1,8- 3 million tons of rice per year. This additional production can be achieved by using tidal swampland which is quite a large area in South Kalimantan. However, one of the obstacles in tidal swampland is the lack of nitrogen (N). N is a macronutrient that becomes the main limiting factor for plant growth as it is needed most among other nutrients. This study aimed to determine the agronomic traits of superior varieties at various N concentration. The experiment used a Split plot design with N concentration as the main plot and three rice varieties as sub-plots, while the environmental design used Randomized Block Design based on the direction of water flow. The agronomic characters observed were the number of leaves, number of tillers, plant height, the total number of panicles per plant, 1000 filled grains dry weight rice, and yield (t ha-1). The results showed that different varieties affected the plant height, number of leaves, number of tillers, the weight of 1000 grains of filled grain with IPB3S and IPB Batola 6R as the best variety, and the concentration treatment effect total of rice tillers, total of rice leaves and total number of per plant with 300 t N ha-1 as the best concentration.

scholarly journals Lactofen and kinetin in soybean yield

2020 ◽  
Vol 50 ◽  
Author(s):  
Inara Alves Martins ◽  
Silvino Guimarães Moreira ◽  
Adriano Teodoro Bruzi ◽  
Guilherme Vieira Pimentel ◽  
Paulo Eduardo Ribeiro Marchiori
Keyword(s):  
Grain Yield ◽  
Reducing Sugars ◽  
Agronomic Traits ◽  
Block Design ◽  
Total Sugars ◽  
Soybean Yield ◽  
Soybean Cultivars ◽  
Apical Buds ◽  
Randomized Block Design ◽  
And Control

ABSTRACT The herbicide lactofen has been used by producers in many conditions, in order to increase the soybean yield. This study aimed to evaluate the influence of lactofen and the phytohormone kinetin on the morpho-agronomic traits, carbohydrate partitioning and yield, in soybean cultivars. Three experiments were carried out in the field, in addition to one experiment in a greenhouse. A randomized block design, with four replications, was used. The treatments were: lactofen [144 g ha-1 of active ingredient (a.i.)], lactofen + kinetin (144 g ha-1 of a.i. + 0.5 g ha-1), kinetin (0.5 g ha-1), manual cutting of apical buds and control. In the subplots, six soybean cultivars (M 6410 IPRO, M 5917 IPRO, NS 7670 RR, NS 6909 IPRO, BMX Lança IPRO and Produza IPRO) were used. In the field, the plant lodging index, plant height, number of nodes and branches, pods and grains per plant, mass of 100 grains and grain yield were evaluated. In the greenhouse, the starch, reducing sugars, sucrose and total sugars in the leaves, stems and roots of three soybean cultivars were quantified. The application of lactofen in the V6 stage influenced the morpho-agronomic traits of the cultivars in the field and increased the soybean yield by 312 kg ha-1, considering all the cultivars. The phytohormone did not influence the morpho-agronomic traits neither the grain yield. The treatments did not induce modification in the partitioning of carbohydrates destined to the roots.

scholarly journals Studies on Character Association and Genetic Divergence in White Jute (Corchorus capsularis L.)

2020 ◽  
Author(s):  
Sayan Jana ◽  
Nitesh Kumar ◽  
Subhra Mukherjee ◽  
Prabir Kumar Bhattacharyya ◽  
Gouranga Sundar Mandal ◽  
...  
Keyword(s):  
Plant Height ◽  
Agronomic Traits ◽  
Block Design ◽  
Genetic Material ◽  
Breeding Population ◽  
Bark Thickness ◽  
High Positive Correlation ◽  
Corchorus Capsularis ◽  
Randomized Block Design ◽  
Correlation And Path Analysis

Background: In white jute, very limited success has been reported by researchers to break yield plateau due to the narrow genetic base of the genetic material available with the breeders. Evaluation of agronomic traits and information about genetic variance in the breeding population is essential for selection and in planning crosses to enhance the productivity and diversity in cultivars. Yield character components are inherited and each one accounts for variations in yield, hence interrelated with each other. The current investigation was done to measure the genetic variability and genetic diversity of white jute genotypes for characters and interrelationship that contribute to yield and fibre quality.Methods: In the present study, fifty-two white jute (C. capsularis L.) genotypes were assessed during the Pre-Kharif season of 2017 at the Teaching Farm of Bidhan Chandra Krishi Viswavidyalaya, Mandouri, Nadia, West Bengal. Plants were raised in randomized block design with three replications. Statistical analysis was done for the estimation of ANOVA variability, correlation and path analysis and genetic divergence.Result: Plant height and bark thickness with high heritability and high genetic advance were identified as important selection parameters. Plant height, bark thickness and green weight per plant had a significantly high positive correlation with dry fibre weight per plant both at genotypic and phenotypic levels. Plant height had the highest contribution toward the dry fibre weight followed by bark thickness. Genotypes were grouped into 13 clusters and cluster I had the highest number of 23 genotypes. The inter-cluster distance was found maximum between cluster I and cluster VI. Cluster XI recorded the highest mean for the plant height. Ten genotypes identified from different clusters in this study can be incorporated as donors in hybridization to combine both yield and improved fibre quality.

Agronomic attributes and stability of exotic sunflower hybrids in Iran

Helia ◽  
2020 ◽  
Vol 43 (72) ◽  
pp. 67-81
Author(s):  
Mehdi Ghaffari ◽  
Seyed Abbasali Andarkhor ◽  
Malihe Homayonifar ◽  
Seyed Ahmad Kalantar Ahmadi ◽  
Farnaz Shariati ◽  
...  
Keyword(s):  
Plant Height ◽  
Coefficient Of Variation ◽  
Oil Content ◽  
Agronomic Traits ◽  
Phenotypic Variability ◽  
Block Design ◽  
Oil Yield ◽  
Growing Period ◽  
Randomized Block Design ◽  
West Azerbaijan

AbstractIn order to identifying of high yielding compatible sunflower hybrids for different regions of Iran, a set of 10 exotic hybrids from Serbia, Turkey, and Italy and four Iranian hybrids were evaluated for agronomic traits; days to flowering and maturity, plant height, head and stem diameter, 1000-achenes weight, achene number per head, oil content and achene, and oil yield. The experiments were conducted as completely randomized block design with four replications in Alborz, Mazandaran, Khuzestan, and West Azerbaijan Provinces for two years (2017–2018). According to the results growing period of the hybrids were variable from 86 days for Dukat to 98 days for Fantaziya. The hybrids Slatki and Dukat had the highest (70 g) and lowest (56 g) 1000-achenes weight. The highest oil content was observed in 08TR003 (45.6%). Among the locations, Miandoab had the highest achene yield (3110 kg/ha). In Sari; the hybrids Barzegar, Fantaziya, and Slatki (3080, 2893, and 2853 kg/ha respectively), In Dezful; Barzegar, Cartago, and Oscar (3234, 3409, and 3226 kg/ha respectively), in Karaj; Oscar, Shams, and Fantaziya (3138, 3081, and 3050 kg/ha respectively), and in Miandob Shams, Fantaziya, and Slatki (4093, 4038, and 3895 kg/ha respectively) had the highest achene yield. Considering overall mean Fantaziya, Shams, and Oskar had the highest achene yield (3286, 3145, and 3087 kg/ha respectively), as well as Fantaziya followed by Barzegar and Shams had the highest oil yield (1396, 1335, and 1330 kg/ha respectively). Considering phenotypic variability among the exotic hybrids Fantaziya, Oskar, Slatki, Novak, 08TR003, and Meteor with lower coefficient of variation and higher achene yield considered as the stable higher yielding hybrids in four test locations of Iran. Through identifying high-yielding and compatible hybrids, the results of this study can assists in increasing of sunflower yield and production in Iran.

PENGARUH KOMPOS SAMPAH KOTA DAN PUPUK KANDANG SAPI TERHADAP PERTUMBUHAN DAN HASIL TANAMAN PAKCOY (BRASSICA RAPA, L. CHINENSIS) PADA ALUVIAL KABUPATEN INDRAMAYU

2018 ◽  
Vol 9 (2) ◽  
pp. 153-163
Author(s):  
Wiwik Ambarsari ◽  
Henly Yuliana
Keyword(s):  
Plant Height ◽  
Brassica Rapa ◽  
Block Design ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Two Factors ◽  
Number Of Leaves ◽  
Experimental Garden

The study aimed to determine the effect of the combination of city waste compost and cattle manure on the growth and yield of pakcoy plants (Brassica rapa, L. Chinensis) in Aluvial, Indramayu Regency. The study was conducted at the Experimental Garden of the Faculty of Agriculture, Wiralodra University, Indramayu Regency from March to August 2018. This study used Factorial Pattern Randomized Block Design with two factors. The first factor is city waste compost and the second factor is cattle manure with 4 levels: 0%, 3.0%, 6.0%, and 9.0%, repeated twice. The results showed that there was an independent influence between city waste compost and cattle manure on plant height and number of leaves. The best combination to increase the feasibility weight of pakcoy consumption is by giving city waste compost 9.0% (S4) and cattle manure 6.0% (K3).

scholarly journals Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2399 ◽  
Author(s):  
Diogo Brito de Almeida ◽  
José Geraldo Barbosa ◽  
José Antônio Saraiva Grossi ◽  
Fernando Luiz Finger ◽  
Joice Crescencio Heidemann
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Cut Flowers ◽  
Floral Buds ◽  
Randomized Block Design ◽  
Commercial Harvest ◽  
Physiological Phenomenon ◽  
Cold Chamber ◽  
The Impact

Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C) constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm), subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season), the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in cold chamber enable greater production of flowers and the highest stem height, factors that favor the increase in market value.

Sign in / Sign up

Export Citation Format

Share Document