scholarly journals Apical Extrusion of Debris and Irrigants Using Different Irrigation Needles

2016 ◽  
Vol 27 (2) ◽  
pp. 192-195 ◽  
Author(s):  
Paula Barcellos Silva ◽  
Angélica Mohnsam Krolow ◽  
Katerine Jahnecke Pilownic ◽  
Renata Picanço Casarin ◽  
Regina Karla Pontes Lima ◽  
...  
Keyword(s):  
Root Canal ◽  
Bonferroni Correction ◽  
Root Canals ◽  
Needle Type ◽  
Apical Extrusion ◽  
Group 3 ◽  
Group 2 ◽  
Root Canal Instrumentation ◽  
Final Instrument ◽  
Group 1

Abstract This study evaluated the influence of irrigation tip, root canal curvature and final apical diameter on periapical debris and irrigant extrusion during root canal instrumentation. After being classified as mildly or moderately curved, the mesiobuccal root canals of 90 human molars were instrumented. The teeth were allocated into three groups according to the used needle type: a flat open-end needle (Group 1), a side-vented needle (Group 2) or a double side-vented needle (Group 3). The amount of extruded material after instrumentation was calculated for each group. The differences in irrigant and debris extrusion between the experimental groups were analyzed with the Mann-Whitney U test. Irrigation tips and final instrument diameter differences were analyzed with the Kruskal-Wallis test. Multiple groups were compared using the Mann-Whitney U-test with a Bonferroni correction at α=0.05. The amount of extruded material from the double side-vented needle was significantly less than the open-ended flat needle (p=0.008), but there was no difference compared to the side-vented needle (p=0.929). The results showed no effect of root curvature and final apical diameter on the amount of irrigant and debris extrusion (p>0.05). The double side-vented needles generated the least material extrusion to the periapical tissues. Irrigation needle type had the greatest influence on periapical irrigant and debris extrusion and the double side-vented needles may be safely used during endodontic therapy.

scholarly journals Apical extrusion of debris by manual and mechanical instrumentation

2007 ◽  
Vol 18 (1) ◽  
pp. 16-19 ◽  
Author(s):  
Lilia E. Leonardi ◽  
Diana M. Atlas ◽  
Guillermo Raiden
Keyword(s):  
Root Canal ◽  
Significance Level ◽  
Root Canals ◽  
Group 4 ◽  
Apical Extrusion ◽  
Working Length ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

The aim of the present study was to assess the presence of apically extruded debris and evaluate the influence of canal curvature on the amount of debris produced by manual and mechanical techniques. Forty single-rooted mature teeth with 15 to 30 degree of root canal curvature were selected. The presence of only one foramen was confirmed using a magnifying lens. A size 15 K-file was placed up to the apical foramen to determine the patency. Working length was determined with the same instrument, 1 mm short of the foramen. According to the employed technique, the groups were labeled as follows: Group 1 - Manual instrumentation with Mor-flex files; Group 2 - Mechanical instrumentation with Cursor and Mor-flex files; Group 3 - Manual instrumentation with Flexi-cut files; Group 4 - Mechanical instrumentation with Cursor and Flexi-cut files. During instrumentation, the root canals were irrigated with 20 mL. Debris extruded through the apical foramen was collected using the Myers and Montgomery technique. The values (in mg) were: Group 1: 0.422 ± 0.683; Group 2: 0.688 ± 0.795; Group 3: 0.409 ± 0.323; Group 4: 0.810 ± 0.708. Data were analyzed statistically by ANOVA at 5% significance level. There was no statistically significant difference among the groups (p<0.05). No statistically significant differences were found between slight and moderate curvatures in terms of the amount of extruded debris (p>0.05).

scholarly journals A comparative study of protaper and twisted file nickel titanium instruments in curved canals preparation

2013 ◽  
Vol 60 (4) ◽  
pp. 175-182
Author(s):  
Lima De ◽  
Giselle Nevares ◽  
Felipe Xavier ◽  
Ferraz Gominho ◽  
Albuquerque de
Keyword(s):  
Cross Sections ◽  
Root Canal ◽  
Nickel Titanium ◽  
Torque Control ◽  
Cross Sectional ◽  
Root Canals ◽  
Group 2 ◽  
Mean Differences ◽  
Root Canal Instrumentation ◽  
Group 1

Introduction. Root canal instrumentation is performed to achieve cleaning and shaping with maximum preservation of its original anatomy. However, in curved canals this approach may cause excessive damage or canal transportation. The present study aimed to evaluate changes in dentin wall caused by instrumentation of curved canals using two nickel titanium rotary systems, ProTaper and Twisted File. Material and Methods. Twenty five extracted human mandibular first molars with two separated mesial root canals were selected. Distal roots were amputated and 50 canals (25 mesiobuccal and 25 mesiolingual) were randomly assigned into two groups: group 1 - ProTaper, and group 2 - Twisted File. All files were used with torque control engine, following the manufacturer instructions. The final instruments were F3 (group 1) and #30/.06 (group 2). Pre and postoperative cross sections were obtained from coronal, middle, and apical portions. Changes in dentin wall were measured and evaluated using Bramante method and digital image software. Statistical analysis was performed using the Mann Whitney U test (p<0.05). Results. The ammount of dentin removed by ProTaper in cervical and middle canal thirds was significantly greater than with Twisted File (p=0.040 and p=0.043). ProTaper eliminated significantly greater ammount of dentin than Twisted File from mesial wall in coronal sections (p=0.039). Mean differences in distance from the center to other walls were not statistically significant in the middle and apical thirds of both groups (p>0.05). Conclusion. ProTaper system produced greater changes in cross sectional area of the root canal compared to Twisted File system.

scholarly journals Apical Extrusion of Debris during Root Canal Preparation with ProTaper Next, WaveOne Gold and Twisted Files

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6254
Author(s):  
Wojciech Eliasz ◽  
Beata Czarnecka ◽  
Anna Surdacka
Keyword(s):  
Root Canal ◽  
Root Canal Preparation ◽  
Movement Kinematics ◽  
Liquid Component ◽  
Apical Extrusion ◽  
Working Length ◽  
Adaptive Motion ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

(1) Background: Apical extrusion of debris is an example of a complication that may arise during root canal treatment, and it has been proven to be an unavoidable occurrence during endodontic treatment by numerous authors. Even though it may not hinder the long-term outcome of treatment, it may lead directly to increased levels of postoperative pain and, therefore, lower levels of patient acceptance and satisfaction. The aim of the study was to assess the weight of apically extruded debris during root canal preparation with instruments that use different movement kinematics (rotary, reciprocating, and adaptive motion); (2) Methods: The study was performed using the Myers and Montgomery model. Sixty human premolar teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, teeth in each group were instrumented to working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers (for Group 1: ProTaper Next X1 & X2; for Group 2: WaveOne Gold Primary, for Group 3: Twisted Files SM1-SM3). Root canals were irrigated with 1 mL of 0.9% NaCl solution between each file insertion. The tubes with collected debris were stored in an incubator at 70 °C for 5 days in order to evaporate the liquid component. Measurement of the weight of extruded debris was performed by subtracting the preinstrumentation from the postinstrumentation weight of the tubes. The results were analyzed with Kruskal–Wallis ANOVA, with significance level set at 0.05; (3) Results: The weight of extruded debris was 0.337 mg (SD = 0.148) for Group 1, 0.305 mg (SD = 0.201) for Group 2, and 0.348 mg (SD = 0.135) for Group 3. (4) Conclusions: Engine-driven root canal preparation with the use of instruments ProTaper Next, WaveOne Gold and Twisted Files that use different movement kinematics (rotary, reciprocating, and adaptive motion) was associated with apical extrusion of debris to a similar extent.

Comparison of apically extruded debris of different nickel titanium instruments

2018 ◽  
Vol 14 (1) ◽  
pp. 16
Author(s):  
Dr. Diyar Kh. Bakr
Keyword(s):  
Root Canal ◽  
Nickel Titanium ◽  
The Other ◽  
Group 3 ◽  
Group 2 ◽  
The One ◽  
Root Canal Instrumentation ◽  
Group 1 ◽  
Shape Group

AbstractBackground and objective: During root canal instrumentation irrigants, necroticpulp tissue, microorganism and dentin debris may be extruded beyond the apexinto the periradicular tissue. These extrusions may cause flare-up. The purpose ofthis study was to compare the amount of apically extruded debris with three rotaryNickel titanium instruments.Methods: Sixty single rooted, single canalled premolars were selected. The rootswere divided randomly into three groups; (n = 10) according to the type ofinstrumentation system used, group 1“ProTaper Next” system, group 2 “OneShape” system and group 3 “Mani Silk” system. The Debris extruded during theinstrumentation was collected and dried in preweighed vials and the amount ofextruded debris was assessed with an electronic balance.Result: results showed that the Mani silk system extruded significantly less debristhan the ProTaper Next and One shape systems (P < .05), and there is nosignificant difference in apically extruded debris between ProTaper Next groupand One Shape group but the One Shape produced more debris than ProTaperNext.Conclusion: the Mani silk file instrument was behaved well during instrumentationand extruded less debris than the other groups.

scholarly journals ANÁLISE DA CAPACIDADE DE LIMPEZA DE TRÊS TÉCNICAS DE INSTRUMENTAÇÃO EM CANAIS RADICULARES ACHATADOS: DIAPHANIZATION STUDY

2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Wagner Altamirando Santana Barros de Souza ◽  
Paloma Souza Gonçalves ◽  
Luis Cardoso Rasquin ◽  
Fabiola Bastos de Carvalho
Keyword(s):  
Root Canal ◽  
Root Canal Preparation ◽  
Arithmetic Average ◽  
Root Canals ◽  
India Ink ◽  
Group 3 ◽  
Group 2 ◽  
Lower Incisors ◽  
Group 1

The purpose of this study was to evaluate by diaphanization the cleaning ability of walls of flattened root canals prepared with three different instruments. Thirty lower incisors, which had their root canals filled with India ink after coronal access and determination of the work length, were selected. The samples were randomly divided into three groups of 10 teeth each, according to the instrument used in the preparation: Group 1– hand files instrumentation; Group 2– instrumentation with ProTaper Universal rotary files; Group 3 – instrumentation with iRace rotary files. After instrumentation, the teeth were diaphanized and evaluated by cleaning ability, analyzing the amount of dentin walls in which India ink was not removed. When performing the Kruskal-Wallis test (p>0.05) there were not statistical significant differences between the groups, as the arithmetic average of the scores at cervical, middle and apical thirds. None of the instruments used in root canal preparation of flattened root canals was able to perform a complete cleaning of the dentin walls.

scholarly journals Comparative evaluation of various endodontic irrigants on apical extrusion of debris

2013 ◽  
Vol 60 (3) ◽  
pp. 119-123
Author(s):  
Sameer Makkar ◽  
Simranjeet Kaur
Keyword(s):  
Sodium Hypochlorite ◽  
Test Results ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Tukey Test ◽  
Group 4 ◽  
Apical Extrusion ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Introduction. All techniques and instruments used to clean and shape canals produce some amount of apically extruded debris. The type of irrigant can affect the amount of apically extruded debris. The aim of the present study was to quantitatively compare the amount of debris extruded apically from root canals when three different irrigants were used during canal preparation with hand instruments. Material and Methods. Twenty extracted single-rooted human mandibular premolars with straight root canals were used. The teeth were randomly divided into 4 groups based on the irrigant used: Group 1: Biopure MTAD (Dentsply), Group 2: 3% NaOCl (Prima Dentalproducts), Group 3: 2% Chlorhexidine (Vishal Industries, Gujarat), Group 4: Control (no irrigation). Debris extruded through apical foramen during root canal preparation was collected into pre weighed empty guttapercha tubes. The weight of dry extruded debris was calculated by subtracting the preinstrumentation and postinstrumentation weight for each group. Obtained data was analyzed using one-way analysis of variance and Tukey test. Results. Group 2 (3% sodium hypochlorite) had the greatest amount of extruded debris which was significantly different from other groups (p<0.05). Conclusion. The type of used irrigant can affect the amount of apically extruded debris. Sodium hypochlorite in the concentration of 3% showed the greatest amount of extruded debris.

scholarly journals Influence of the EDTA, Nd:YAG laser and association of both on the filling of artificial lateral root canals

2004 ◽  
Vol 12 (1) ◽  
pp. 22-26 ◽  
Author(s):  
Fernanda Gomes de Moraes ◽  
Clovis Monteiro Bramante ◽  
Ivaldo Gomes de Moraes ◽  
Everdan Carneiro ◽  
Renato Menezes
Keyword(s):  
Statistical Analysis ◽  
Nd:Yag Laser ◽  
Lateral Root ◽  
Hybrid Technique ◽  
Apical Portion ◽  
Root Canals ◽  
Group 3 ◽  
Sodium Hypochloride ◽  
Group 2 ◽  
Group 1

This study aimed at evaluating the influence of EDTA, Nd:YAG laser and the combination of both for filling of artificial lateral root canals. Forty-five human mandibular premolars were employed, on which three artificial lateral root canals were prepared by means of a reamer with a similar diameter to a K file #15. The teeth were instrumented through the stepback technique employing Gates Glidden burs at the middle and cervical thirds and manual files at the apical portion, and irrigation with 1% sodium hypochloride. The teeth were divided in three groups: Group 1 -EDTA for 5 minutes; Group 2 -application of Nd:YAG laser at 15 Hz, 100 mJ and 1.5 Watts; and Group 3 - association of both. Roots were filled through the Tagger's hybrid technique, radiographed and the radiographs were digitized. Scores were assigned to the filling of the lateral root canals. Statistical analysis revealed no significant differences between the entire groups and also on the analysis of each third.

scholarly journals Fracture resistance of immature teeth filled with mineral trioxide aggregate, bioaggregate, and biodentine

2016 ◽  
Vol 10 (02) ◽  
pp. 220-224 ◽  
Author(s):  
Emre Bayram ◽  
Huda Melike Bayram
Keyword(s):  
Fracture Resistance ◽  
Mineral Trioxide Aggregate ◽  
Mean Values ◽  
Root Canals ◽  
Immature Teeth ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Post Hoc ◽  
Group 1

ABSTRACT Objective: The purpose of this study was to evaluate fracture resistance of teeth with immature apices treated with coronal placement of mineral trioxide aggregate (MTA), bioaggregate (BA), and Biodentine. Materials and Methods: Forty-one freshly extracted, single-rooted human premolar teeth were used for the study. At first, the root length was standardized to 9 mm. The crown-down technique was used for the preparation of the root canals using the rotary ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) of F3 (30). Peeso reamer no. 6 was stepped out from the apex to simulate an incompletely formed root. The prepared roots were randomly assigned to one control (n = 5) and three experimental (n = 12) groups, as described below. Group 1: White MTA (Angelus, Londrina, Brazil) was prepared as per the manufacturer's instructions and compacted into the root canal using MAP system (Dentsply Maillefer, Ballaigues, Switzerland) and condensed by pluggers (Angelus, Londrina, Brazil). Group 2: The canals were filled with DiaRoot-BA (DiaDent Group International, Canada). Group 3: Biodentine (Septodont, Saint Maur des Fosses, France) solution was mixed with the capsule powder and condensed using pluggers. Instron was used to determine the maximum horizontal load to fracture the tooth, placing the tip 3 mm incisal to the cementoenamel junction. Mean values of the fracture strength were compared by ANOVA followed by a post hoc test. P < 0.05 was considered statistically significant. Results: No significant difference was observed among the MTA, BA, and biodentine experimental groups. Conclusion: All the three materials tested, may be used as effective strengthening agents for immature teeth.

scholarly journals The Effect of Root Canal Irrigation with Combination of Sodium Hypo-chlorite and Chlorhexidine Gluconate on the Sealing Ability of Obturation Materials

2014 ◽  
Vol 8 (1) ◽  
pp. 184-187 ◽  
Author(s):  
Hamed Homayouni ◽  
Nima Moradi Majd ◽  
Heidar Zohrehei ◽  
Behrad Mosavari ◽  
Mamak Adel ◽  
...  
Keyword(s):  
Root Canal ◽  
Chlorhexidine Gluconate ◽  
Smear Layer ◽  
Fluid Filtration ◽  
Layer Removal ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Objectives: The aim of this study was to evaluate the effect of the precipitate that was formed by combining Sodium Hypochlorite (NaOCl) and Chlorhexidine Gluconate (CHX) on the sealing ability of root canal obturation materials. Materials and Methods: The fluid filtration method was conducted on a total of 100 roots. Samples were randomly divided into two control (n=5) and three experimental groups (n=30). The samples in group 1 were irrigated with 1.5 mL of 2.5% NaOCl, and then the smear layers of the teeth were removed by 17% EDTA, while the specimens of group 2 were irrigated by 1.5 mL of 2.5% NaOCl and 1.5 mL of 2% CHX; after the smear layer removal, a final flush with 1.5 mL of 2.5% NaOCl was performed. The samples of group 3 were irrigated the same as group 1 but after the smear layer removal canals were irrigated again with 1.5 mL of 2.5% NaOCl and then a final flush with 1.5 mL of 2% CHX was performed. Teeth were obturated with gutta-percha and AH26 sealer and after seven days, microleakage was evaluated by the fluid filtration technique. The results were analyzed by the ANOVA and Tukey's test. Results: The samples in group 3 had significantly greater microleakage compared to teeth in group 1, 2 (p<0.05), and the specimens in group 1 showed significantly less amount of microleakage than samples in group 2, 3 (p<0.05). Conclusion: The presence of the precipitate that is formed due to interaction between NaOCl and CHX has negative effect on the sealing ability of gutta-percha and AH26 sealer.

scholarly journals Effectiveness of NaOCl alone or in combination with EDTA on the diffusion of hydroxyl ions released by calcium hydroxide paste

2006 ◽  
Vol 14 (1) ◽  
pp. 1-5 ◽  
Author(s):  
Mara Cristina Santos Felippe ◽  
Wilson Tadeu Felippe ◽  
Catherine Schmitz Espezim ◽  
Sérgio Fernando Torres de Freitas
Keyword(s):  
Calcium Hydroxide ◽  
Root Canal ◽  
Statistical Significance ◽  
Distilled Water ◽  
Mechanical Preparation ◽  
Group 3 ◽  
Group 2 ◽  
Water Canals ◽  
Group 1

AIM: To evaluate the effect of different irrigant solutions employed during removal and replacement of calcium hydroxide paste on the diffusion of hydroxyl ions through root canal dentine in vitro. METHODOLOGY: Thirty-five maxillary and mandibular human canines with straight and fully developed roots were used. After mechanical preparation up to 1mm short of tooth length, 30 canals were filled with calcium hydroxide paste and 5 canals were left empty; all teeth had their coronal accesses properly sealed. Teeth were placed in plastic containers with distilled water, and pH was read after 30 days when the paste from 20 teeth was renewed. After removal of the paste by endodontic instrumentation and irrigation with distilled water, canals were replenished with newly mixed paste in Group 1 and 2. In these groups, final irrigation was conducted with 5 mL of EDTA followed by 5 mL of NaOCl in specimens in Group 1, and 5 mL of NaOCl only in specimens in Group 2. In 10 teeth the paste was not replenished at 30 days (Group 3). All specimens were returned to the containers with fresh distilled water, and the pH was recorded after another 30 days. The differences between the first (30d) and second (60d) pH readings were calculated and submitted to analysis of variance and individual comparisons using the Scheffeé's test. RESULTS: Results of mean analysis on differences of pH readings showed that greater diffusion had occurred on specimens in Group 3. Individual comparisons using Scheffeé's test showed statistical significance between Groups 2 and 3, and equivalence between all other groups. CONCLUSION: It was concluded that the use of EDTA did not enhance diffusion of hydroxyl ions through root canal dentine.

Sign in / Sign up

Export Citation Format

Share Document