scholarly journals Filling Ability and Flow of Root Canal Sealers: A Micro-Computed Tomographic Study

2020 ◽  
Vol 31 (5) ◽  
pp. 499-504
Author(s):  
Jáder Camilo Pinto ◽  
Fernanda Ferrari Esteves Torres ◽  
Mariana Mena Barreto Pivoto-João ◽  
Joni Augusto Cirelli ◽  
Juliane Maria Guerreiro-Tanomaru ◽  
...  
Keyword(s):  
Root Canal ◽  
Continuous Wave ◽  
Glass Plate ◽  
Filling Material ◽  
Micro Computed Tomography ◽  
Central Cavity ◽  
Root Canals ◽  
Mandibular Molars ◽  
Filling Ability ◽  
Cavity Filling

Abstract This study evaluated by micro-computed tomography (μCT) the filling ability in curved root canals, besides the flow of AH Plus (AHP) and Neo MTA Plus (NMTAP) sealers using different methodologies. Mandibular molars mesial roots with two root canals and degree of curvature between 20° and 40° were selected. The specimens were prepared with the ProDesign R system up to size 35.05 and were filled with the sealers by a continuous wave of condensation technique, Thermo Pack II (n=12). The teeth were scanned using μCT after root canal preparation and obturation. The volumetric percentage of filling material and voids were calculated. Flow was evaluated based on ISO 6876/2012 (n=10). Flow and filling were also evaluated in μCT using a glass plate with a central cavity and four grooves from the central cavity (n=6). Flow was linearly calculated into the grooves. The central cavity filling (CCF) and lateral cavity filling (LCF) were calculated in mm³. Data were submitted to non-paired t test with a significance threshold at 5%. The percentage of filling and voids between the root canals filled with AHP or NMTAP was similar (p>0.05). NMTAP presented the lowest flow in conventional test (p<0.05). Using μCT, sealers had similar CCF, LCF and linear flow (p>0.05). In conclusion, NMTAP and AHP had similar filling ability in curved mesial root canals of mandibular molars without presence of isthmus. Although AHP presented better flow than NMTAP using ISO methodology, there was no difference between these materials regarding volumetric filling when evaluated by μCT.

scholarly journals Evaluation of flow and filling of root canal sealers using different methodologies

2019 ◽  
Vol 48 ◽  
Author(s):  
Fernanda Ferrari Esteves TORRES ◽  
Juliane Maria GUERREIRO-TANOMARU ◽  
Jader Camilo PINTO ◽  
Idomeo BONETTI-FILHO ◽  
Mário TANOMARU-FILHO
Keyword(s):  
Root Canal ◽  
Glass Plate ◽  
Linear Measurement ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Central Cavity ◽  
Filling Ability ◽  
Length Width ◽  
Root Canal Sealers ◽  
Filling Capacity

Abstract Introduction Flow and filling ability of root canal sealers are indispensable for hermetic sealing of the root canal. Micro-computed tomography (micro-CT) can be used as a complementary methodology to evaluate such properties. Objective To evaluate the flow and filling ability of AH Plus, Endofill and Sealapex by conventional methodology and micro-CT. Material and method The flow of the sealers was analyzed according to ISO 6876/2012 and complemented by the area evaluation. Glass plates were manufactured with diameters of 1×1×2 mm and 1×1×1 mm (length, width and height), with a central cavity and four grooves in the horizontal and vertical directions. Each material was placed in the central cavity. Another glass plate and a metal weight were placed on the cement and kept for 10 minutes. The glass plate/sealer set was scanned using micro-CT. The flow was calculated by linear measurement of the material in the grooves. The central filling (mm3) was calculated in the central cavity and the lateral filling was measured up to 2 mm from the central cavity. Data were submitted to ANOVA/Tukey tests (α=0.05). Result All evaluated sealers presented flow according to ISO 6876 standards. The materials showed central cavity filling capacity higher than 80% and lateral filling greater than 75%. There was no difference in flow (mm and mm2) and in the filling ability (mm3) provided by the materials (p>0.05). Conclusion All evaluated root canal sealers showed adequate flow and filling capacity, suggesting their clinical application.

scholarly journals Retreatment of mesial roots of mandibular molars filled with resin- based and bioceramic sealers

2021 ◽  
Vol 20 ◽  
pp. e210432
Author(s):  
Marina de Almeida Salim ◽  
Fabiola Ormiga ◽  
Ricardo Tadeu Lopes ◽  
Heloisa Gusman
Keyword(s):  
Computed Tomography ◽  
Root Canal ◽  
T Test ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Mandibular Molars ◽  
Ct Analysis ◽  
Ah Plus ◽  
Endodontic Retreatment

Aim: The aim of this study was to evaluate, by micro-computed tomography (micro-CT) analysis, the remaining filling material during endodontic retreatment performed with Protaper retreatment without solvent. Methods: Forty mandibular molars were divided into two groups (n = 20) according to the sealer used in the obturation: the bioceramic TotalFill BC (TF) or the resin-based AH Plus (AHP). The specimens were scanned before instrumentation, after obturation and after filling removal. Only the mesial roots were analysed. The filling volumes and the remaining filling material were calculated in the entire root canal and in the cervical, middle and apical thirds. Results: The volume of obturation and the volume of remaining filling material in the entire root canal and in the cervical, middle and apical thirds of the canal between the groups were not statistically different (independent t-test, p > 0.05). In the AHP group, there was a higher percentage of remaining filling material in the middle third than in the cervical third (p < 0.05). Conclusion: The filling material could not be entirely removed from any specimen.

scholarly journals Effectiveness of different rotary file systems in removing the root canal filling material: A micro-computed tomography study

2021 ◽  
Vol 15 (4) ◽  
pp. 273-278
Author(s):  
Esin Özlek ◽  
Hüseyin Gündüz
Keyword(s):  
Computed Tomography ◽  
Root Canal ◽  
File System ◽  
File Systems ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Root Canals ◽  
Time Required

Background. This study aimed to examine the retreatment efficiency of four NiTi rotary file systems with micro-computed tomography (micro-CT). Methods. Forty premolar teeth were shaped up to F2 using the ProTaper Universal rotary file system and obturated with MTA Fillapex. The root canals were scanned with micro-CT to evaluate the volume of root canal filling before retreatment. The samples were randomly divided into four groups according to the file system used to remove root canal filling material (n=10): ProTaper Universal Retreatment, ProTaper NEXT, EdgeFile XR, and EdgeFile® X3 NiTi system. All the samples were scanned with a micro-CT device for the second time to evaluate the amount of residual filling material in the root canals. The percentages of filling material removed from root canals were calculated. Additionally, the time spent on the removal of the root canal filling material was recorded. The data were analyzed using the Shapiro-Wilk and Kruskal-Wallis tests. Results. There were no significant differences between the groups in the percentage of root canal filling material removal. However, a statistically significant difference was found between the groups in the time required to reach the apex and remove the entire filling material. The time required to remove the root canal filling material was higher in the EdgeFile® X3 group. Conclusion. NiTi files manufactured for root canal preparation can be used effectively and safely to remove root canal filling materials. EdgeFile XR produced for retreatment can be used as an alternative to ProTaper Universal Retreatment files.

scholarly journals Influence of retreatment in the formation of dentinal microcracks in mandibular molars filled with a calcium silicate based sealer

2021 ◽  
Vol 5 (1) ◽  
pp. 001-004
Author(s):  
Ribeiro Jorge Luciana da Cruz ◽  
Ormiga Fabiola ◽  
Neves Aline ◽  
Lopes Ricardo Tadeu ◽  
Gusman Heloisa
Keyword(s):  
Cross Sections ◽  
Filling Material ◽  
Micro Computed Tomography ◽  
Endodontically Treated Teeth ◽  
Root Canal Filling ◽  
Vertical Root Fracture ◽  
Root Canals ◽  
Mandibular Molars ◽  
Gutta Percha ◽  
Endodontic Retreatment

Introduction: In endodontically treated teeth, dentinal defects such as microcracks can progress to a vertical root fracture and lead to tooth loss. Objective: The present study aimed to evaluate, by micro-computed tomography analysis, the formation of dentinal microcracks during filling removal in endodontic retreatment of root canals filled with gutta-percha and Total Fill BC bioceramic sealer. Methods: Twenty mesial roots of mandibular molars were instrumented and obturated with gutta-percha and Total Fill BC sealer and then the filling material was removed with rotary Protaper Retreatment files. The specimens were scanned before instrumentation, after filling and after retreatment. The transversal images obtained after filling were compared with the images obtained after removal of the filling material. A descriptive statistical analysis was performed. Results: Among the 24.444 cross-sections analyzed, 5.67% presented some type of dentinal defect, with 0.51% in the initial images, 2.58% in the post-filling images and 2.58% in the post-retreatment images. All the dentinal defects identified in the images obtained after the retreatment were already present in the corresponding images after the filling. New dentinal microcracks were not observed after removal of the filling material. Conclusion: Retreatment of mesial roots of mandibular molars filled with a silicate-based root canal filling material do not influence the formation of dentinal microcracks.

scholarly journals Comparison of the Effects of a Bioceramic and Conventional Resin-Based Sealers on Postoperative Pain after Nonsurgical Root Canal Treatment: A Randomized Controlled Clinical Study

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2661
Author(s):  
Kiche Shim ◽  
Young-Eun Jang ◽  
Yemi Kim
Keyword(s):  
Postoperative Pain ◽  
Postoperative Period ◽  
Root Canal ◽  
Continuous Wave ◽  
Root Canal Treatment ◽  
Root Canals ◽  
Anterior Teeth ◽  
Significant Difference ◽  
Ah Plus ◽  
Group 2

Background: This clinical trial aimed to compare the effects of bioceramic sealer and resin-based sealer on the incidence and intensity of postoperative pain. Methods: Patients with anterior teeth or premolars requiring root canal treatment were assigned to group 1 (n = 51). Those with molars requiring treatment were assigned to group 2 (n = 57). In groups 1En and 2En, root canals were obturated with Endoseal MTA using the single-cone technique. In groups 1AH and 2AH, the sealer used was AH Plus with the continuous wave technique. On the day of canal filling, each patient was instructed to indicate their pain intensity over the 7 day postoperative period, at rest and, while biting, using a visual analog scale. Results: There was no significant difference in the incidence or intensity of postoperative pain between the Endoseal MTA and AH Plus groups during the 7 day postoperative period (p > 0.05). Less time was needed to seal the root canals with Endoseal MTA, especially in group 2 (p < 0.05). Conclusions: Endoseal MTA and AH Plus had similar effects on the incidence and intensity of postoperative pain. The obturation time was shorter when using Endoseal MTA compared to AH Plus.

scholarly journals Micro-tomographic characterization of the root and canal system morphology of mandibular first premolars in a Chilean population

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alfredo Sierra-Cristancho ◽  
Luis González-Osuna ◽  
Daniela Poblete ◽  
Emilio A. Cafferata ◽  
Paola Carvajal ◽  
...  
Keyword(s):  
Root Canal ◽  
Multiple Root ◽  
Root Anatomy ◽  
Type I ◽  
Micro Computed Tomography ◽  
Canal System ◽  
Root Canals ◽  
Wide Range ◽  
Root Canal System ◽  
Chilean Population

AbstractThis study aimed to analyze the root anatomy and root canal system morphology of mandibular first premolars in a Chilean population. 186 teeth were scanned using micro-computed tomography and reconstructed three-dimensionally. The root canal system morphology was classified using both Vertucci’s and Ahmed’s criteria. The radicular grooves were categorized using the ASUDAS system, and the presence of Tomes’ anomalous root was associated with Ahmed’s score. A single root canal was identified in 65.05% of teeth, being configuration type I according to Vertucci’s criteria and code 1MP1 according to Ahmed’s criteria. Radicular grooves were observed in 39.25% of teeth. The ASUDAS scores for radicular grooves were 60.75%, 13.98%, 12.36%, 10.22%, 2.15%, and 0.54%, from grade 0 to grade 5, respectively. The presence of Tomes’ anomalous root was identified only in teeth with multiple root canals, and it was more frequently associated with code 1MP1–2 of Ahmed’s criteria. The root canal system morphology of mandibular first premolars showed a wide range of anatomical variations in the Chilean population. Teeth with multiple root canals had a higher incidence of radicular grooves, which were closely related to more complex internal anatomy. Only teeth with multiple root canals presented Tomes’ anomalous root.

scholarly journals Safety and Effectiveness of Additional Apical Preparation using a Rotary Heat-treated Nickel–Titanium file with Larger Diameter and Minimum Taper in Retreatment of Curved Root Canals

2021 ◽  
Author(s):  
Jader Camilo Pinto ◽  
Fernanda Ferrari Esteves Torres ◽  
Airton Oliveira Santos-Junior ◽  
Marco Antonio Hungaro Duarte ◽  
Juliane Maria Guerreiro-Tanomaru ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Continuous Wave ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
Filling Material ◽  
Root Canals ◽  
Filling Materials ◽  
Heat Treated ◽  
Before And After ◽  
Curved Root Canals

Abstract Objective The aim of this study was to investigate the effect of additional apical preparation using the ProDesign Logic (PDL) 50/.01 rotary heat-treated nickel–titanium (NiTi) file with a larger diameter and minimal taper for retreatment of curved root canals. Materials and Methods Mesial curved root canals of 12 mandibular molars were prepared using PDL 25/.06 and filled using the continuous wave of condensation technique and AH Plus sealer. After retreatment using ProDesign S (PDS) 25/.08, PDL 25/.06 and PDL 35/05, a complementary procedure was performed with PDL 50/.01. Microcomputed tomography (micro-CT) scanning was performed before and after retreatment procedures. The cyclic fatigue resistance of unused PDS 25/.08, PDL 25/.06, PDL 35/.05 and PDL 50/.01 instruments (n = 12) was evaluated in a stainless-steel device. Statistical Analysis Data on the volumes of the root canals and the remaining filling materials were submitted to the paired t-test. Cyclic fatigue resistance data was submitted to one-way ANOVA and Tukey’s tests (α = 0.05). Results Use of PDL 50/.01 decreased the remaining filling materials in the apical third (p < 0.05). The root canal volume was similar in the cervical and middle thirds before and after preparation using PDL 50/.01 (p > 0.05). PDL 50/.01 presented the highest cyclic fatigue resistance (p < 0.05). Conclusions Use of the PDL 50/.01 instrument as an additional apical preparation for retreatment of curved root canals improved filling material removal in the apical third, while maintaining the dentin in the cervical and middle thirds. In addition, PDL 50/.01 presented high-flexural resistance.

Microtomography Evaluation of The Efficacy of Reciprocating And Rotary Instruments Followed By Different Complementary Steps In The Retreatment of Curved Root Canals

2021 ◽  
Author(s):  
Lincoln de Campos Fruchi
Keyword(s):  
Good Choice ◽  
Filling Material ◽  
Micro Computed Tomography ◽  
Niti Wire ◽  
Passive Ultrasonic Irrigation ◽  
Root Canals ◽  
Apical Level ◽  
Rotary Instruments ◽  
Irrigation Solution ◽  
Ultrasonic Irrigation

Objectives: The purpose of this study was to evaluate the efficacy of steps, isolated or in cumulative means, in the endodontic retreatment of curved canals. Methodology: Forty mesial roots of mandibular molars were divided into two groups. In the group 1 the filling removal was done with NiTi reciprocating M-wire and NiTi control memory wire rotary instruments followed by a passive ultrasonic irrigation solution agitation. In the group 2, the initial filling removal was done with NiTi reciprocating M-wire and conventional NiTi wire rotary instruments followed by a rotary plastic instrument for irrigation solution agitation. The results were analyzed through micro-computed tomography. Results: The filling material was not completely removed for both groups. All steps did not statically differ between groups regarding to the filling removal. In the intragroup analyses, the results differed in some levels, mainly in the apical level, but did not statistically differ in all the different levels after each step. A statistical significant increase (P<.05), for both groups, in the volume of filling material in the isthmus was observed. Conclusions: None of the protocols completely removed the filling material. The better results were found for the apical level and after passive ultrasonic irrigation. Vertical warm condensation filling technique enhanced the volume of filling material in the root canal system including the isthmus. Clinical relevance: the control memory NiTi instruments could be considered a good choice for use as an additional step in the procedure of filling removal from curved mesial root canals.

scholarly journals GuttaFlow Bioseal as Monocone Obturation Technique in Curved Root Canals: A Scanning Electron Microscopy Study

2021 ◽  
Vol 15 (2) ◽  
pp. 42-59
Author(s):  
Musliana Mustaffa ◽  
◽  
Hajar Ar Rahmah Nasri ◽  
Insyirah Kamarulzaman ◽  
Mohamad Shafiq Mohd Ibrahim ◽  
...  
Keyword(s):  
Surface Area ◽  
Root Canal ◽  
Current Approach ◽  
Filling Material ◽  
Sem Images ◽  
Root Canals ◽  
Gutta Percha ◽  
Curved Root Canals ◽  
Scanning Electron ◽  
Group 1

The obturation quality of GuttaFlow Bioseal in curved root canals is not commonly investigated although there has been a current approach toward utilizing this material in extracted molars in recent years. This study assessed the obturated surface area, extrusion of root filling material beyond the apical foramen and duration of obturation procedure in curved root canals using monocone obturation technique. Access cavity was prepared in 20 human mandibular molars. Root canals with curvature of more than 10 as determined according to Schneider’s method were included. Samples were prepared using Hyflex CM rotary files and divided into two groups (n=10): Group 1 [gutta-percha cone and GuttaFlow Bioseal] and Group 2 [gutta-percha cone and RoekoSeal Automix root canal sealer]. The duration of obturation procedure was recorded and obturation radiographs were taken. Samples were bisected and the mesial roots were sectioned horizontally to obtain 3 root segments; apical, middle and coronal. All resected roots were mounted on brass stubs, sputter-coated with thin platinum coating and observed under scanning electron microscope (SEM) at 70x magnification. The SEM images were transferred to the SketchAndCalc Area Calculator software. No statistically significant differences in the obturated surface area and extrusion of root filling material were observed between Group 1 and 2, irrespective of the status of root canal curvature. Duration for obturation in severe root canal curvatures between Group 1 and 2 were statistically significant. Obturated surface area and extrusion of root filling material were not affected by the root canal curvature, however duration for obturation using GuttaFlow Bioseal in severe root canal curvatures was slightly longer.

scholarly journals Evaluation of Two Shaping Systems and Two Ultrasonic Irrigation Devices in Removing Root Canal Filling Material from Mesial Roots of Mandibular Molars: A Micro CT Study

2019 ◽  
Vol 7 (1) ◽  
pp. 2 ◽  
Author(s):  
Marc Krikor Kaloustian ◽  
Walid Nehme ◽  
Claire El Hachem ◽  
Carla Zogheib ◽  
Nabil Ghosn ◽  
...  
Keyword(s):  
Ct Scan ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Mandibular Molars ◽  
Group A ◽  
Ultrasonic Irrigation ◽  
Group B ◽  
Group D

We assessed the efficiency of two shaping file systems and two passive ultrasonic irrigation (PUI) devices for removing filling material during retreatment. The mesial canals from 44 extracted mandibular molars were prepared and obturated. The teeth were randomly divided into two groups, and then one group was retreated with Reciproc R25 (VDW, Munich, Germany) (n = 44) and the other group was retreated with 2Shape (TS, Micro Mega, Besançon, France) (n = 44). A micro-computed tomography (CT) scan was taken before and after the retreatment to assess the volume of the filling material remnants. The teeth were then randomly divided into four groups to test two different PUI devices: Irrisafe (Satelec Acteon Group, Merignac, France) and Endo Ultra (Vista Dental Products, Racine, WI, USA). The teeth in Group A were retreated with 2Shape to test the Endo Ultra (n = 22) device, the teeth in Group B were retreated with 2Shape in order to test the Irrisafe (n = 22) device, the teeth in Group C were retreated with Reciproc to test the Endo Ultra (n = 22) device, and Group D was retreated with Reciproc to test the Irrisafe (n = 22) device. A third micro-CT scan was taken after the retreatment to test the PUIs. The percentage of Gutta-Percha (GP) and sealer removed was 94.75% for TS2 (p < 0.001) and 89.3% for R25 (p < 0.001). The PUI significantly enhanced the removal of the filling material by 0.76% for Group A (p < 0.001), 1.47% for Group B (p < 0.001), 2.61% for Group C (p < 0.001), and by 1.66% for Group D (p < 0.001). 2Shape was more effective at removing the GP and sealer during retreatment (p = 0.018). The supplementary approach with PUI significantly improved filling material removal, with no statistical difference between the four groups (p = 0.106).

Sign in / Sign up

Export Citation Format

Share Document