scholarly journals Growth, production and yield of common bean under water replacement levels

Author(s):  
Ivomberg D. Magalhães ◽  
Guilherme B. Lyra ◽  
José L. de Souza ◽  
Gustavo B. Lyra ◽  
Rener L. de S. Ferraz ◽  
...  

ABSTRACT The bean is a world-class crop and requires adequate water management for higher yield. The objective of this study was to evaluate the growth and the production and to fit multiple regression models to estimate the production components, total biomass accumulation and grain yield of ‘Rosinha’ bean under levels of replacement of evapotranspired water. The experimental design was randomized blocks with four repetitions. Treatments consisted of fractions of crop evapotranspiration (25, 50, 75, 100, 125 and 150% ETc). Growth variables (plant height, number of leaves, leaf area per plant, leaf area index, stem dry mass and leaf dry mass) and production components (number of pods per plant, pod length, pod diameter, pod dry mass, total biomass, pod mass per plant, grain yield) were evaluated. Measurements of growth variables carried out at 35 days after sowing were used to fit multiple regression models to estimate dry pod mass, total biomass accumulation and grain yield of common bean. Higher growth and yield of common bean, ‘Rosinha’, are obtained with irrigation depth corresponding to 100% of the evapotranspired water.

2020 ◽  
Vol 19 ◽  
pp. 10
Author(s):  
ELISA DE ALMEIDA GOLLO ◽  
ADROALDO DIAS ROBAINA ◽  
MARCIA XAVIER PEITER ◽  
ENIO MARCHESAN ◽  
ROBSON GIACOMELI ◽  
...  

The raised seedbed implantation system and the use of surfaceirrigation can be important practices to enable rotation with rice and ensure theexpression of the productive potential of maize in lowland areas. The purpose ofthis work was to evaluate the use of implantation systems and surface irrigationon agronomic characteristics and grain yield of maize crop in lowland areas.Two experiments were conducted in the experimental lowland area of theFederal University of Santa Maria – UFSM, during the 2014/15 crop season.The experiments consisted in the use of implantation systems with and withoutraised seedbeds and surface irrigation. The evaluated characteristics were plantheight, shoot dry mass, leaf area index, yield components and grain yield. Plantheight, leaf area index and shoot dry mass are higher when maize is grown inraised seedbeds in lowland areas. The raised seedbed system can be consideredan efficient way to improve drainage in the cultivation area, resulting in a highergrain yield. The use of irrigation during periods of water deficit, in the criticalperiod of crop growth, increases the grain yield of maize grown in lowland areas.


2020 ◽  
Vol 19 ◽  
pp. 10
Author(s):  
ELISA DE ALMEIDA GOLLO ◽  
ADROALDO DIAS ROBAINA ◽  
MARCIA XAVIER PEITER ◽  
ENIO MARCHESAN ◽  
ROBSON GIACOMELI ◽  
...  

The raised seedbed implantation system and the use of surfaceirrigation can be important practices to enable rotation with rice and ensure the expression of the productive potential of maize in lowland areas. The purpose of this work was to evaluate the use of implantation systems and surface irrigation on agronomic characteristics and grain yield of maize crop in lowland areas. Two experiments were conducted in the experimental lowland area of the Federal University of Santa Maria – UFSM, during the 2014/15 crop season. The experiments consisted in the use of implantation systems with and without raised seedbeds and surface irrigation. The evaluated characteristics were plant height, shoot dry mass, leaf area index, yield components and grain yield. Plant height, leaf area index and shoot dry mass are higher when maize is grown in raised seedbeds in lowland areas. The raised seedbed system can be considered an efficient way to improve drainage in the cultivation area, resulting in a higher grain yield. The use of irrigation during periods of water deficit, in the critical period of crop growth, increases the grain yield of maize grown in lowland areas.


Author(s):  
Muhammad Zeeshan Mehmood ◽  
Ghulam Qadir ◽  
Obaid Afzal ◽  
Atta Mohi Ud Din ◽  
Muhammad Ali Raza ◽  
...  

AbstractSeveral biotic and abiotic stresses significantly decrease the biomass accumulation and seed yield of sesame crops under rainfed areas. However, plant growth regulators (such as Paclobutrazol) can improve the total dry matter and seed production of the sesame crop. The effects of the paclobutrazol application on dry matter accumulation and seed yield had not been studied before in sesame under rainfed conditions. Therefore, a two-year field study during 2018 and 2019 was conducted with key objectives to assess the impacts of paclobutrazol on leaf greenness, leaf area, total dry matter production and partitioning, seed shattering, and seed yield of sesame. Two sesame cultivars (TS-5 and TS-3) were treated with four paclobutrazol concentrations (P0 = Control, P1 = 100 mg L−1, P2 = 200 mg L−1, P3 = 300 mg L−1). The experiment was executed in RCBD-factorial design with three replications. Compared with P0, treatment P3 improved the leaf greenness of sesame by 17%, 38%, and 60% at 45, 85, and 125 days after sowing, respectively. However, P3 treatment decreased the leaf area of sesame by 14% and 20% at 45 and 85 days after sowing than P0, respectively. Compared with P0, treatment P3 increased the leaf area by 46% at 125 days after sowing. On average, treatment P3 also improved the total biomass production by 21% and partitioning in roots, stems, leaves, capsules, and seeds by 23%, 19%, 23%, 22%, and 40%, respectively, in the whole growing seasons as compared to P0. Moreover, under P3 treatment, sesame attained the highest seed yield and lowest seed shattering by 27% and 30%, respectively, compared to P0. This study indicated that by applying the paclobutrazol concentration at the rate of 300 mg L−1 in sesame, the leaf greenness, leaf areas, biomass accumulation, partitioning, seed yield, and shatter resistance could be improved. Thus, the optimum paclobutrazol level could enhance the dry matter accumulation and seed production capacity of sesame by decreasing shattering losses under rainfed conditions.


2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 10-11
Author(s):  
Esther D McCabe ◽  
Mike E King ◽  
Karol E Fike ◽  
Maggie J Smith ◽  
Glenn M Rogers ◽  
...  

Abstract The objective was to determine effect of trucking distance on sale price of beef calf and feeder cattle lots sold through Superior Livestock Video Auctions from 2010 through 2018. Data analyzed were collected from 211 livestock video auctions. There were 42,043 beef calf lots and 19,680 feeder cattle lots used in these analyses. Six states (Colorado, Iowa, Kansas, Nebraska, Oklahoma, and Texas) of delivery comprised 70% of calf lots and 83% of feeder cattle lots and were used in these analyses. All lot characteristics that could be accurately quantified or categorized were used to develop multiple regression models that evaluated effects of independent factors using backwards selection. A value of P < 0.05 was used to maintain a factor in the final models. Based upon reported state of origin and state of delivery, lots were categorized into one of the following trucking distance categories: 1) Within-State, 2) Short-Haul, 3) Medium-Haul, and 4) Long-Haul. Average weight and number of calves in lots analyzed was 259.2 ± 38.4 kg BW and 100.6 ± 74.3 head, respectively. Average weight and number of feeder cattle in lots analyzed was 358.4 ± 34.3 kg BW and 110.6 ± 104.1 head, respectively. Beef calf lots hauled Within-State sold for more ($169.24/45.36 kg; P < 0.0001) than other trucking distance categories (Table 1). Long-Haul calf lots sold for the lowest (P < 0.0001) price ($166.70/45.36 kg). Within-State and Short-Haul feeder cattle lots sold for the greatest (P < 0.0001) price ($149.96 and $149.81/45.36 kg, respectively; Table 2). Long-Haul feeder cattle lots sold for the lowest (P < 0.0001) price, $148.43/45.36 kg. These results indicate there is a price advantage for lots expected to be hauled shorter distances, likely because of cost and risk associated with transportation.


Grana ◽  
2005 ◽  
Vol 44 (2) ◽  
pp. 108-114 ◽  
Author(s):  
José Manuel Angosto ◽  
Stella Moreno‐Grau ◽  
Javier Bayo ◽  
Belén Elvira‐Rendueles

1975 ◽  
Vol 26 (3) ◽  
pp. 497 ◽  
Author(s):  
EAN Greenwood ◽  
P Farrington ◽  
JD Beresford

The time course of development of a lupin crop was studied at Bakers Hill, Western Australia. The aim was to gain insight into the crop factors influencing yield. Weekly measurements were made of numbers and weights of plant parts, and profiles of roots, leaf area and light interception. A profile of carbon dioxide in the crop atmosphere was taken at the time of maximum leaf area, and the net carbon dioxide exchange (NCE) of pods was estimated for three successive weeks. The crop took 10 weeks to attain a leaf area index (LAI) of 1 and a further 9 weeks to reach a maximum LAI of 3.75, at which time only 33% of daylight reached the pods on the main axis. Once the maximum LAI was attained at week 19, leaf fall accelerated and rapid grain filling commenced almost simultaneously on all of the three orders of axes which had formed pods. Measurements of NCE between pods on the main axis and the air suggest that the assimilation of external carbon dioxide by the pods contributed little to grain filling. Grain dry weight was 2100 kg ha-1 of which 30%, 60% and 10% came from the main axis, first and second order apical axes respectively. Only 23% of the flowers set pods and this constitutes an important physiological limitation to grain yield.


1982 ◽  
Vol 18 (1) ◽  
pp. 93-100 ◽  
Author(s):  
S. U. Remison ◽  
E. O. Lucas

SUMMARYTwo maize cvs, FARZ 23 and FARZ 25, were grown at three densities (37,000, 53,000 and 80,000 plants/ha) in 1979 and 1980. Leaf area index (LAI) increased with increase in plant population and was at a maximum at mid-silk. Grain yield was highest at 53,000 plants/ha. There was no relation between LAI and grain yield but there was a positive correlation between LAI and total dry matter yield.


Sign in / Sign up

Export Citation Format

Share Document