scholarly journals Methods of adaptability and stability applied to eucalyptus breeding

2018 ◽  
Vol 53 (1) ◽  
pp. 53-62
Author(s):  
Osmarino Pires dos Santos ◽  
Ivan Ricardo Carvalho ◽  
Maicon Nardino ◽  
Tiago Olivoto ◽  
Alan Junior de Pelegrin ◽  
...  
Keyword(s):  
Factor Analysis ◽  
Field Experiments ◽  
Block Design ◽  
Genetic Breeding ◽  
Breast Height ◽  
Randomized Complete Block Design ◽  
Productive Potential ◽  
The Mean ◽  
Highly Correlated

Abstract: The objective of this work was to evaluate the consistency of the methods of Annicchiarico, Lin & Binns, Wricke, and factor analysis in identifying eucalyptus clones with stability, adaptability, and high productive potential. Eight-four clones, with three years of age, from the genetic breeding program of the company CMPC Celulose Riograndense were used. Three field experiments were carried out in a randomized complete block design, in an 84x3 factorial arragement, with 20 replicates of one plant per plot. The clones were evaluated as to diameter at breast height, plant height, and volume of wood. The methods of Annicchiarico and Lin & Binns are highly correlated with each other, and their use together with the method of Wricke is a sound strategy for the evaluation of eucalyptus clones. The factor analysis identified broadly adaptable clones, and some of them were the same ones identified by the methods of Annicchiarico and Lin & Binns. The use of the mean classification of the clones, along with the factor analysis, is efficient to identify the most adapted, stable, and productive ones among a high number of genotypes.

scholarly journals Effect of spacing and fertilizer management on the yield and yield attributes of mukhikachu (Colocasia esculenta Schott.)

2016 ◽  
Vol 41 (4) ◽  
pp. 713-723
Author(s):  
S Akther ◽  
F Ahmed ◽  
MR Islam ◽  
MA Hossen ◽  
AHMM Rahman Talukder
Keyword(s):  
Field Experiments ◽  
Block Design ◽  
Recommended Dose ◽  
Cost Ratio ◽  
Plant Spacing ◽  
Yield Attributes ◽  
Benefit Cost Ratio ◽  
Maximum Benefit ◽  
Randomized Complete Block Design ◽  
Benefit Cost

Field experiments were carried out in the Agronomy field of BARI, Joydebpur, RARS, Jamalpur and RARS, Ishurdi during two consecutive kharif seasons of 2012 and 2013 to determine the suitable plant spacing and optimum fertilizer dose for higher yield of mukhikachu. Three levels of spacing viz., 60 cm x 60 cm, 60 cm x 45 cm and 60 cm x 30 cm and three levels of fertilizer dose viz., recommended dose (3000-96-27-81-18 kg ha-1 of CD-N-P-K-S), 25% less than the recommended dose and 25% higher than the recommended dose were used as treatment variables. The experiments were laid out in factorial randomized complete block design with three replications. Results revealed that the closer spacing (60 cm x 30 cm) in combination with 25% higher than the recommended fertilizer dose gave the maximum edible yield of mukhikachu (two years average) at all locations (20.04 t ha-1, 20.75 t ha-1 and 16.63 t ha-1 at Joydebpur, Jamalpur and Ishurdi, respectively). The wider spacing (60 cm x 60 cm) coupled with 25% less than the recommended fertilizer dose produced the lowest yield (two years average). The maximum benefit- cost ratio (two years average) was obtained from the combination of the recommended fertilizer dose and 60 cm x 30 cm spacing, that were 2.93 at Joydebpur and 3.42 at Ishurdi, while at Jamalpur the maximum benefit-cost ratio (two years average) was found maximum from 60 cm x 30 cm spacing with 25% higher than the recommended fertilizer dose (3.12).Bangladesh J. Agril. Res. 41(4): 713-723, December 2016

Wisc Factor Structure for Normal Negro Pre-School Children

1964 ◽  
Vol 15 (2) ◽  
pp. 543-548 ◽  
Author(s):  
R. Travis Osborne
Keyword(s):  
Factor Analysis ◽  
School Children ◽  
Digit Span ◽  
Block Design ◽  
School Level ◽  
School Factors ◽  
Intelligence Scale ◽  
Picture Arrangement ◽  
The Mean ◽  
Intercorrelation Matrix

In order to estimate the dimensionality of the Wechsler Intelligence Scale for Children, factor analysis was applied to a 30 by 30 intercorrelation matrix of the WISC and four reference tests. The 10 standard WISC subtests, except Coding, were split into two, three, or four parts to yield as many variables as possible. Ss, were 111 Negro pre-school children; mean age, 6 yr. 1 mo.; the mean full scale IQ was 84. Evidence is presented supporting 10 statistically significant orthogonal dimensions. Not all factors are perfectly congruent with the subtest structure of the WISC or concordant with the results of prior factorizations of the WISC at the pre-school level. There is no factor for Block Design apart from Picture Arrangement. The Digit Span subtest splits involve three different WISC factors, two are from the performance section of the test and one is from the verbal section. Coding is involved in only one factor; Manipulation of Areas, one of the non-verbal reference tests. At least 7 of the 10 significant pre-school factors are readily identified by WISC subtests or combinations of WISC subtests.

scholarly journals Morpho-physiological Traits and Mineral Composition on Local Maize Population Growing in Agro Ecological Conditions in Kosova

2013 ◽  
Vol 5 (2) ◽  
pp. 232-237
Author(s):  
Sali ALIU ◽  
Imer RUSINOVCI ◽  
Shukri FETAHU ◽  
Kemajl BISILIMI
Keyword(s):  
Block Design ◽  
Physiological Traits ◽  
Cellulose Content ◽  
Maize Breeding ◽  
Maize Population ◽  
Maize Populations ◽  
Randomized Complete Block Design ◽  
Morphological And Physiological Traits ◽  
The Mean ◽  
Field And Laboratory Conditions

Twelve local maize populations were evaluated at the experimental farm, University of Prishtina, Kosovo. The study was conducted to assess the magnitude of genetic variation in local maize populations for different morphological-physiological and chemical composition under field and laboratory conditions. Randomized complete block design (RCBD) with three replications was used for laying out the experiment. The results showed that there were significant differences for most morphological and physiological traits under study. The mean grain yield of all populations was 102.96 g plant-1. The protein and oil contents ranged between 11.53 to 9.43% and 4.23 to 4.87% respectively. The cellulose content varied from 6.03 to 6.37%. There were also big differences regarding phenotypic correlations. The present study revealed considerable amount of diversity among the local maize populations which could be manipulated for further improvement in maize breeding.

scholarly journals Effect of Seeding Rate On Growth And Yield Of Okra (Abelmoschus Esculantus) In Zuru Northern Guinea Savanna Of Nigeria

2018 ◽  
Vol 6 (02) ◽  
Author(s):  
Yohanna J, A. ◽  
Muhammad A, M.
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth And Yield ◽  
Land Resource ◽  
Seeding Rate ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Resource Space ◽  
Plant Stand ◽  
The Mean

Field experiment was carried out during 2010 rainy season to find the effect of seeding rate on the growth and yield of okra (Abelmuschus esculentus) in Zuru Northern Guinea Savannah. Zuru is located in Zuru Local government area of Kebbi State (Latitude 11o 251 to 11o 551 North and Longitude 4o 51 to 5o 251 East of the equator). The experiment consisted of three treatments that is planting okra at one plant per stand (S1), two plants per stand (S2) and three plants per stand (S3). The experiment was laid out in randomized complete block design (RCBD) and the treatments replicated three time. The result of the experiment has shown that plant height and number of leaves/plant at 3, 6 and 9 weeks after planting (    WAP) were significantly influenced by seeding rate (P<0.05). At 3, 6 and 9 WAP tallest plants were obtained from okra plants planted at three plants/stand (27.83, 54.0 and 77.0cm) respectively followed by okra planted at two plant/stand (24.77, 50.67 and 74.33 leave/plant respectively ). However, more number of leaves/plant were obtained from okra plant at one plant/stand (9.67, 24.67 and 48.0 leaves/plant respectively) followed by okra planted at two plants/stand (8.33, 18.33 and 36.33 leaves/plant respectively). Seeding rate had significant influence on time of 50 percent flowering with one plant/stand first attaining 50 percent flowering stage just within 36.33 days followed by okra planted at two plants/stand (38 days). The mean fresh fruit yield of okra was also significantly influenced by seeding rate with the highest yield of fresh fruits obtained from three plants/stand (83.34/ha) followed by okra planted at two plants/stand (55.56/ha). However, the result of the findings recommends that, okra should be planted at two plants/stand for medium sized and marketable okra fresh fruits since at three plants/stand leads to the production of undersized fresh fruits which do not often attract customers. At one plant/stand, there seemed to be early fruiting and bigger sized fresh fruits but low total yield due to underutilization of land resource/space. Planting at one plant/stand should therefore be avoided

scholarly journals Growth Performance of Lettuce Using Fermented Products as Organic Fertilizers

2019 ◽  
Vol 1 (3) ◽  
pp. 65
Author(s):  
Kareen Lynn E. Negado
Keyword(s):  
Growth Performance ◽  
Block Design ◽  
Organic Fertilizers ◽  
Control Groups ◽  
Lettuce Seeds ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
And Control ◽  
Fermented Products

This study evaluates the growth performance of lettuce (Lactuca sativa L.) utilizing various fermented products as organic fertilizers. Growth performance is determined through the plant’s weight and leaves and significant differences in growth among various treatments: (a) fish trash, (b) scrap seaweeds, (c) kangkong, and control groups urea (positive) and water (negative) was also determined. Kangkong leaves are fermented for 10 days, fish trash for 14 days and 1 month for seaweeds. Lettuce seeds are sown before transplanting (15 days after germination) into pots and placed in raised beds. Randomized complete block design is utilized in the experiment. Growth performance is measured through the number of leaves 10, 20, and 30 days after transplant and mass of plant upon harvest. After 30 days, the lettuce was harvested. Based on the findings, the soil and fermented products are acidic and the needed organic matter for optimum growth of lettuce are not sufficient as well as some nutrients of the fermented products. Among the organic fertilizers, kangkong at 30 ml performs best in terms of the growth performance of lettuce. Urea performs best in terms of the mass upon harvest. Significant differences exist in the mean number of leaves of lettuce treated with various amounts of organic fertilizers with the plants that receive urea. Lettuce produce more number of leaves and with the highest mass upon harvest when treated with urea compared with organic fertilizers applied after 30 days from transplant. Keywords: fermented kangkong; fish trash; growth performance; lettuce; scrap seaweeds

scholarly journals Length of Efficacy for Control of Curly Top in Sugar Beet With Seed and Foliar Insecticides

Plant Disease ◽  
2016 ◽  
Vol 100 (7) ◽  
pp. 1364-1370 ◽  
Author(s):  
Carl A. Strausbaugh ◽  
Erik J. Wenninger ◽  
Imad A. Eujayl
Keyword(s):  
Sugar Beet ◽  
Host Resistance ◽  
Seed Treatment ◽  
Field Experiments ◽  
Block Design ◽  
Root Yield ◽  
Pyrethroid Insecticides ◽  
Beet Curly Top Virus ◽  
Randomized Complete Block Design ◽  
Untreated Check

Curly top in sugar beet caused by Beet curly top virus (BCTV) is an important yield-limiting disease that can be reduced via neonicotinoid and pyrethroid insecticides. The length of efficacy of these insecticides is poorly understood; therefore, field experiments were conducted with the seed treatment Poncho Beta (clothianidin at 60 g a.i. + beta-cyfluthrin at 8 g a.i. per 100,000 seed) and foliar treatment Asana (esfenvalerate at 55.48 g a.i./ha). A series of four experiments at different locations in the same field were conducted in 2014 and repeated in a neighboring field in 2015, with four treatments (untreated check, Poncho Beta, Asana, and Poncho Beta + Asana) which were arranged in a randomized complete block design with eight replications. To evaluate efficacy, viruliferous (contain BCTV strains) beet leafhoppers were released 8, 9, 10, or 11weeks after planting for each experiment, which corresponded to 1, 2, 3, and 4 weeks after Asana application. Over both years, in 30 of 32 observation dates for treatments with Poncho Beta and 14 of 16 observation dates for Asana, visual curly top ratings decreased an average of 41 and 24%, respectively, with insecticide treatments compared with the untreated check. Over both years, in eight of eight experiments for treatments with Poncho Beta and six of eight experiments for Asana, root yields increased an average of 39 and 32%, respectively, with treatment compared with the untreated check. Over both years, the Poncho Beta treatments increased estimated recoverable sucrose (ERS) yield by 75% compared with the untreated check for weeks 8 and 9. By week 10, only the Poncho Beta + Asana treatment led to increases in ERS in both years, while the influence of increasing host resistance may have made other treatments more difficult to separate. When considering curly top symptoms, root yield, and ERS among all weeks and years, there was a tendency for the insecticides in the Poncho Beta + Asana treatment to complement each other to improve efficacy.

The randomized complete block design.

2021 ◽  
pp. 177-191
Author(s):  
Edward F. Durner
Keyword(s):  
Field Experiments ◽  
Block Design ◽  
Potential Gradient ◽  
Single Treatment ◽  
Randomized Complete Block Design

Abstract This chapter focuses on randomized complete block design (RCBD). The RCBD can be simple, holding several levels of a single treatment, or complex, holding a complicated factorial. Field experiments may be blocked due to an observed or potential gradient in the field where the experiment will be performed. The yield of four lettuce cultivars was used as an example.

scholarly journals VARIAÇÃO LONGITUDINAL E EFEITO DO ESPAÇAMENTO NA MASSA ESPECÍFICA BÁSICA DA MADEIRA DE Mimosa scabrella E Ateleia glazioveana

FLORESTA ◽  
2013 ◽  
Vol 43 (2) ◽  
pp. 327 ◽  
Author(s):  
Elder Eloy ◽  
Braulio Otomar Caron ◽  
Rômulo Trevisan ◽  
Denise Schmidt ◽  
Magda Lea Bolzan Zanon ◽  
...  
Keyword(s):  
Block Design ◽  
Wood Quality ◽  
Basic Density ◽  
Technological Characteristic ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Living Space ◽  
Randomized Complete Block Design ◽  
Axial Variation ◽  
Set Up

 Este trabalho teve como objetivo avaliar a variação longitudinal e o efeito do espaçamento de plantio na massa específica básica das árvores de Mimosa scabrella Benth e Ateleia glazioveana Baill, aos 36 meses de idade. Analisou-se um experimento instalado em delineamento de blocos completos casualizados, com três repetições. Os tratamentos foram definidos em função dos espaçamentos (2,0x1,0 m, 2,0x1,5 m, 3,0x1,0 m e 3,0x1,5 m). Foram avaliadas 72 árvores, sendo essas medidas e cubadas pelo método de Smalian. Em seguida, foram retirados discos nas posições do tronco: 0,10 m (base), 1,30 m do solo (DAP – Diâmetro a Altura do Peito), 25%, 50% e 75% da altura total da árvore, para determinação da massa específica básica. A massa específica básica em árvores de Mimosa scabrella apresentou um decréscimo até a região do DAP, seguido de acréscimo, sem tendência de estabilização com a altura. A Ateleia glazioveana apresentou uma tendência de decréscimo no sentido base-topo das árvores. Os espaçamentos influenciaram a variação da massa específica básica em árvores de Mimosa scabrella e Ateleia glazioveana, não sendo verificada uma variação sistemática positiva ou negativa em relação ao espaço vital proporcionado.Palavras-chave:  Variação axial; característica tecnológica da madeira; qualidade da madeira; espaçamento de plantio. AbstractLongitudinal variation and effect of spacing on basic density wood of Mimosa scabrella and Ateleia glazioveana. This study aimed to evaluate the variation in length and effect of spacing of the basic density of Mimosa scabrella Benth e Ateleia glazioveana Baill, trees with 36 months of age. We analyzed an experiment set up in randomized complete block design with three replications. The treatments were defined by the spacing (2.0x1.0 m, 2.0x1.5 m, 3.0x1.0 m, 3.0x1.5 m). 72 trees were evaluated, and these measures and scaled by the method of Smalian. Then, the disks were removed from the trunk positions: 0.10 m (base), 1.30 m (DAP - diameter at breast height), 25%, 50% and 75% of the total height of the tree, determining the basic density. The basic density in trees of Mimosa scabrella showed a decrease to the region of the DAP, followed by addition, without a tendency to stabilize with time. The Ateleia glazioveana showed a decreasing trend towards bottom-up tree. The spacing influenced the variation of basic density in trees of Mimosa scabrella e Ateleia glazioveana not been verified a systematic positive or negative trend in relation to the living space provided. Keywords: Axial variation; technological characteristic of wood; wood quality; planting space.

scholarly journals Silvicultural performance of forest species introduced in integrated livestock forest system in Lavras, MG, Brazil

2017 ◽  
Vol 47 (12) ◽  
Author(s):  
Erick Martins Nieri ◽  
Renato Luiz Grisi Macedo ◽  
Nelson Venturin ◽  
Regis Pereira Venturin ◽  
José Alvim Pinto Júnior ◽  
...  
Keyword(s):  
Survival Rate ◽  
Block Design ◽  
Minas Gerais ◽  
The Other ◽  
Forest Species ◽  
Diameter At Breast Height ◽  
African Mahogany ◽  
Breast Height ◽  
Red Cedar ◽  
Randomized Complete Block Design

ABSTRACT: The objective of this study was to evaluate the silvicultural performance of four forest species introduced in a setting for integrated livestock forest (ILF) in a pasture in Lavras, Minas Gerais, Brazil. The species included were the Australian red cedar (seminal and clonal), African mahogany, teak, and guanandi. A split plot scheme with a randomized complete block design comprising four replicates and 48 plants per plot, was used in the following arrangement: (3(3x2) +7x2) m. The evaluation times (12, 18, 31, 36, and 43 months after planting) corresponded to the subplots. Performances of all four species were evaluated on the basis of their survival rate, height (H) and diameter at breast height (DBH). Based on the performance of the species with regard to these parameters, the clonal Australian red cedar showed a greater growth in DBH and height in the ILF setting as compared to the other species, which indicates it to be a suitable species for the region of Lavras, MG as long as its survival control occurs in the implantation phase.

scholarly journals Estimates of Heritability and Genetic Advance for Yield Components of Cowpea (Vigna unguiculata L. Walp) under Drought Stress Conditions

2021 ◽  
Vol 3 (3) ◽  
pp. 10-17
Author(s):  
A. Sheidu ◽  
T. M. Igyuve ◽  
A. E. Ochigbo
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Narrow Sense ◽  
Narrow Sense Heritability ◽  
Randomized Complete Block Design ◽  
The Mean ◽  
Parental Mating ◽  
Pod Number

The study was conducted at the Teaching and Research Farms, Federal University of Agriculture, Makurdi, Nigeria. Five Cowpea genotypes (FUAMPEA-1, IT99K-573-1-1, SAMPEA-16, SAMPEA-8, BIU LOCAL) were crossed and advanced to F1, F2, BC1 and BC2 populations using bi-parental mating design. The six generations were evaluated in a Randomized Complete Block Design with three replications. Significant test of the mean performances among the entries showed significant differences among the generations for the characters studied. Wide ranges of narrow sense heritability (18 to 79%), broad sense heritability (21 to 92%) and genetic advance (5.7 to 24.1%) were obtained for characters studied. Broad and narrow sense heritability as well as genetic advance was moderate to high for most of the characters studied such as days to 50% flowering, plant height, days to pod maturity, number of seeds per pod, number of pods per plant, hundred seed weight, root length and grain yield for the three sets of cowpea crosses. The results also revealed the possibility of exploitation for grain yield and drought tolerance in the crosses studied.

Sign in / Sign up

Export Citation Format

Share Document