scholarly journals Cone beam computed tomography in endodontics

2012 ◽  
Vol 23 (3) ◽  
pp. 179-191 ◽  
Author(s):  
Conor Durack ◽  
Shanon Patel

Cone beam computed tomography (CBCT) is a contemporary, radiological imaging system designed specifically for use on the maxillo-facial skeleton. The system overcomes many of the limitations of conventional radiography by producing undistorted, three-dimensional images of the area under examination. These properties make this form of imaging particularly suitable for use in endodontics. The clinician can obtain an enhanced appreciation of the anatomy being assessed, leading to an improvement in the detection of endodontic disease and resulting in more effective treatment planning. In addition, CBCT operates with a significantly lower effective radiation dose when compared with conventional computed tomography (CT). The purpose of this paper is to review the current literature relating to the limitations and potential applications of CBCT in endodontic practice.

2013 ◽  
Vol 5 (2) ◽  
pp. 52-55
Author(s):  
Prakash Lokhande ◽  
G.B SHIVAMURTHY ◽  
SAURAV KR SRIVASTAVA

ABSTRACT Cone beam computed tomography (CBCT) has been specifically designed to produce undistorted three-dimensional information of the maxillofacial skeleton, including the teeth and their surrounding tissues with a significantly lower effective radiation dose compared with conventional computed tomography (CT). The system overcomes many of the limitations of conventional radiography by producing undistorted, three-dimensional images of the area under examination. These properties make this form of imaging particularly suitable for use in endodontics. The clinician can obtain an enhanced appreciation of the anatomy being assessed, leading to an improvement in the detection of endodontic disease and resulting in more effective treatment planning. In addition, CBCT operates with a significantly lower effective radiation dose when compared with conventional computed tomography (CT). The aim of this paper is to review current literature on the applications and limitations of CBCT in the management of endodontic problems.


2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Ateksha Bhardwaj Khanna

Abstract Background Endodontic disease can adversely affect the quality of life and therefore early diagnosis and consequent timely treatment is of paramount importance for the Endodontist. Radiology is an essential component in treatment planning, disease monitoring and assessment of treatment outcome. Periapical radiographs and panoramic radiography are frequently utilised but they provide only two-dimensional representation of three-dimensional structures. The advent of cone beam computed tomography (CBCT) offers three-dimensional accuracy of the hard tissue images with a reasonable cost and this has revolutionised imaging of the dentomaxillofacial structures. This imaging system has been seen to overcome some limitations of conventional radiography, as brought out in this review. The improvement in the accuracy is, however, accompanied at the cost of increased radiation exposure to the patient. Nevertheless, smaller areas of exposure are normally appropriate for endodontic imaging, and adjustment in the exposure parameters can further moderate the effective dose (Loubele et al. 37(6):309-18, 2008). Aims and objectives The aim of this review is to present the pertinent literature on the various applications of cone beam computed tomography in the field of endodontics. Methods Literature was electronically searched on the following sources; Medline and Keats Library. Further, a manual search was performed on the following journals: International Endodontic Journal, Journal of Endodontics, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, Endodontology, Journal of Dental Research, European Journal of Oral Sciences & Odontology and Dentomaxillofacial Radiology. A preliminary search was performed to gain an idea of the available literature using keywords ‘Cone Beam Computed Tomography’ to view the volume of the literature evident and identify questions to be addressed in this review. The initial search showed 243 potential articles. After scrutinising the titles and abstracts of the retrieved articles, 70 relevant studies were reviewed in full text. Furthermore, ‘published guidelines on the use of CBCT’ were also searched so as to include the results as an additional source material. All the articles eligible to be included in the review were in the English language and ranged from the year 1960 to the present. Also all the studies reviewed were based on the various uses of cone beam computed tomography in the field of endodontics. The keywords used to search were ‘Cone Beam Computed Tomography (CBCT)’, ‘Conventional radiography’, ‘Applications of CBCT in endodontics’, ‘CBCT and tooth morphology’, ‘CBCT and apical periodontitis’, ‘CBCT and vertical root fractures’, ‘CBCT and resorption’, ‘CBCT and pre-surgical assessment’, ‘CBCT and dento-alveolar trauma’ and ‘CBCT and endodontic outcome’. Results Every case is unique and CBCT should be considered only after studying each case individually. CBCT imaging needs to be adopted or used where information from conventional imaging systems is either inadequate for the management of endodontic problems or inconclusive. Having said that, it is safe to state that CBCT imaging has the potential to become the first choice for endodontic treatment planning and outcome assessment, especially when new scanners with lower radiation doses and enhanced resolution would be available.


2016 ◽  
Vol 73 (4) ◽  
pp. 305
Author(s):  
Alessandra Areas e Souza ◽  
Ingrid De Assis Mota Costa ◽  
Paula Mozer Vidal

Objective: The aim of this study was to conduct a literature review on the use of cone-beam computed tomography in periodontics and determine the extent and severity of periodontal lesions so as to encourage the development of a new concept for diagnosis and surgical planning in periodontics. Material and methods: A literature search was conducted in PubMed database using the following keywords: computed tomography, diagnosis periodontics, bone defects, furcation lesions, and periodontal biotype. A total of 33 articles were found. Results: A review of the articles suggested benefits in using this technology in periodontal surgical planning, for treatment of furcation lesions, bone defects, and determination of periodontal biotype. Conclusion: Cone-beam computed tomography three-dimensional images is superior to conventional radiography. It also minimizes patient exposure to ionizing radiation, optimizes surgical planning, and decreases operative time, leading to a better response to treatment. This technology is very useful in clinical practice, but is not used widely in periodontics. We believe that the use of this technology should be promoted among professionals.


2017 ◽  
Vol 5 (1) ◽  
pp. 5-15
Author(s):  
Rishikesh Pratap Sah ◽  
Fusheng Dong ◽  
Rahul Gupta

 Background and Objectives: The aim of this paper is to describe the application of a newly developed three-dimensional imaging system, Cone-Beam Computed Tomography in the diagnosis and evaluation of supernumerary teeth.Material and Methods: One hundred and eighty-five patients with supernumerary teeth (134 males and 51 females) were included in this study. Patients ranged in age from 6 to 38 years. Supernumerary teeth were detected by clinical examination and conventional radiographs. Moreover, careful investigation for more details was made with the cone beam computed tomography. Supernumerary teeth which were detected with the examinations of the cone beam computed tomography images were analyzed according to the number, location, shape and position.Results: Males were affected more than females in a ratio of 2.6:1. 95 % supernumerary teeth were located in maxilla and 5 % in the mandible. 71.6% of supernumerary teeth were conical in shape. 93.6% supernumerary teeth were impacted and 6.4% were erupted. A total of 198 supernumerary teeth were found to be present in palatal/lingual side and 24 were found on the buccal side. 80.5 % of the patients had one, 18.9 % had two, and 0.5 % had three supernumeraries.Conclusion: Detailed examinations and evaluations of these teeth with Cone-Beam Computed tomography (CBCT) yields accurate 3-dimensional pictures of supernumerary teeth, local dental and bony structures which are very beneficial in terms of proper diagnosis and treatment planning and preventing complications which may occur. Janaki Medical College Journal of Medical Sciences (2017) Vol. 5(1): 5-15


2014 ◽  
Vol 10 (4) ◽  
pp. 5-10
Author(s):  
В. Фанакин ◽  
V. Fanakin ◽  
И. Бутюгин ◽  
I. Butyugin ◽  
Е. Батанова ◽  
...  

<p>The use of cone beam computed tomography (CBCT) in paediatric dentistry has been mentioned in numerous publications and case reports. The indications for the use of CBCT in paediatric dentistry, however, have not yet been properly addressed. On the other hand, the three basic principles of radiation protection (justification, limitation and optimisation) should suffice. A review of the current literature was used to assess the indications and contra-indications for the use of CBCT in paediatric dentistry. Paramount is the fact that CBCT generates a higher effective dose to the tissues than traditional dental radiographic exposures do. The effective radiation dose should not be underestimated, especially not in children, who are much more susceptible to stochastic biological effects. The thyroid gland in particular should be kept out of the primary beam as much as possible. As with any other radiographical technique, routine use of CBCT is not acceptable clinical practice. CBCT certainly has a place in paediatric dentistry, but its use must be justified on a patient case individual basis. </p>


2016 ◽  
Vol 157 (2) ◽  
pp. 52-58 ◽  
Author(s):  
Ádám Perényi ◽  
Zsolt Bella ◽  
Zoltán Baráth ◽  
Péter Magyar ◽  
Katalin Nagy ◽  
...  

Accurate diagnosis and preoperative planning in modern otorhinolaryngology is strongly supported by imaging with enhanced visualization. Computed tomography is often used to examine structures within bone frameworks. Given the hazards of ionizing radiation, repetitive imaging studies exponentially increase the risk of damages to radiosensitive tissues. The authors compare multislice and cone-beam computed tomography and determine the role, advantages and disadvantages of cone-beam computed tomography in otorhinolaryngological imaging. They summarize the knowledge from the international literature and their individual imaging studies. They conclude that cone-beam computed tomography enables high-resolution imaging and reconstruction in any optional plane and in space with considerably lower effective radiation dose. Cone-beam computed tomography with appropriate indications proved to be an excellent diagnostic tool in otorhinolaryngological imaging. It makes an alternative to multislice computed tomography and it is an effective tool in perioperative and postoperative follow-up, especially in those cases which necessitate repetitive imaging with computed tomography. Orv. Hetil., 2016, 157(2), 52–58.


Trauma ◽  
2017 ◽  
Vol 19 (3) ◽  
pp. 175-185
Author(s):  
Chaya M David ◽  
Ramya K Kastala ◽  
Namitha Jayapal ◽  
Shanila A Majid

The middle third of the facial skeleton is one of the most complex areas of the human body. A critical factor determining the successful treatment of midfacial fractures is an early and correct diagnosis. Assessment and management of the traumatized patient requires rapid evaluation and decision making. Imaging for the evaluation of patients with midfacial fractures has contributed to achieving an accurate diagnosis and a subsequent successful management. It requires a knowledge of those imaging modalities and projections that provide the most information with the least exposure of radiation to the patient. Conventional radiography has been used successfully for many years although advanced imaging methods such as—three-dimensional computed tomography, magnetic resonance imaging, and cone beam computed tomography have been applied more recently. In this article, we will take a relook at various modalities to image midfacial fractures, and discuss the rationale for selection of those procedures that offer the greatest diagnostic information.


Sign in / Sign up

Export Citation Format

Share Document