scholarly journals Comparison of methodologies for automatic generation of limits and drainage networks for hidrographic basins

2009 ◽  
Vol 13 (4) ◽  
pp. 369-375 ◽  
Author(s):  
Samantha A. Alcaraz ◽  
Christophe Sannier ◽  
Antonio C. T. Vitorino ◽  
Omar Daniel
Keyword(s):  
Digital Terrain Model ◽  
Automatic Generation ◽  
Geographical Information ◽  
Stream Network ◽  
Terrain Model ◽  
Digital Terrain ◽  
Contour Lines ◽  
Drainage Networks ◽  
Selection Of

The objective of this work was to compare methodologies for the automatic generation of limits and drainage networks, using a geographical information system for basins of low relief variation, such as the Dourados catchment area. Various data/processes were assessed, especially the ArcHydro and AVSWAT interfaces used to process 50 m resolution DTMs formed from the interpolation of digitalized contour lines using ArcInfo, ArcView and Spring GIS, and a 90 m resolution SRTM DTM acquired by interferometry radar. Their accuracy was estimated based upon the pre-processing of small basic sub-basin units of different relief variations, before applying the best combinations to the entire Dourados basin. The accuracy of the automatic stream network generation and watershed delineation depends essentially on the quality of the raw digital terrain model. The selection of the most suitable one then depends completely on the aims of the user and on the work scale.

scholarly journals Mapping of slopes for the operation of agricultural harvesters in Bandeirantes Municipality (PR)

2017 ◽  
Vol 38 (1) ◽  
pp. 97
Author(s):  
Gustavo Rodrigues Gimenes ◽  
Rone Batista Oliveira ◽  
Alessandra Fagioli da Silva ◽  
Luiz Carlos Reis ◽  
Teresinha Esteves da Silveira Reis
Keyword(s):  
Ground Surface ◽  
Digital Terrain Model ◽  
Large Area ◽  
Terrain Model ◽  
Spatial Point ◽  
Aster Gdem ◽  
Digital Terrain ◽  
Contour Lines ◽  
High Resolution Images ◽  
Point Data

The slope of terrain represents a risk factor for mechanized harvesting, leading to impediments or restrictions on agricultural operations, or even to machines toppling over in the field. Recently, the Digital Terrain Model (DTM) has become widely adopted as one of the most viable techniques for obtaining slope and elevation. Therefore, this study aims to assess methods of acquiring DTMs to calculate the slope, and to determine the areas that are suitable and unsuitable for the operation of harvesters in the municipality of Bandeirantes (PR). Four methods were selected to produce DTMs for the construction of slope zoning maps applicable for harvester operations. The image sources included SRTM, ASTER GDEM, digitizing contour lines and kriging of spatial point data. After generating DTMs by the four different methods, the area suitable for the operation of harvesters was obtained based on the limits of operational slopes for harvesters in the literature. The high-resolution images, such as those obtained by scanning the contour lines and ASTER GDEM gave the best representation of the ground surface. Regardless of the method used to obtain the operational slopes, the municipality has a large area that is suitable for mechanized harvesting.

scholarly journals TECHNIQUE OF AUTOMATIC MOBILE LASER SCANNING DATA FILTERING

2021 ◽  
Vol 26 (3) ◽  
pp. 5-19
Author(s):  
Maxim A. Altyntsev ◽  
◽  
Hamid Majid Saber Karkokli ◽  
Keyword(s):  
Laser Scanning ◽  
Single Point ◽  
Laser Scanner ◽  
Digital Terrain Model ◽  
Weather Conditions ◽  
Automatic Generation ◽  
Data Filtering ◽  
Terrain Model ◽  
Digital Terrain ◽  
Filtration Technique

The result of laser scanning is an array of laser points. The generation of a single point cloud in a given coordinate system is carried out during the registration process at the stage of preliminary field data processing. At this stage it is also often necessary to filter the data. Laser points with an erroneous position are eliminated during the data filleting. The number of erroneous laser points is determined by the of the laser scanner characteristics, surveyed area peculiarities and weather conditions. The devel-opment of methods and algorithms for filtering laser scanning data is carried out based on the analysis of the laser point spatial position and a certain set of additional characteristics, such as intensity value, echo signal, color value. The technique of mobile laser scanning data filtering for the territory of the road passing among the forest and close to individual industrial facilities and building. The main goal of the proposed filtration technique is to obtain data for automatic generation of an accurate digital terrain model. The filtration technique was developed for data acquired under the least favorable con-ditions – in wet weather. Accuracy estimation of generating digital terrain model based on filtered data was carried out.

scholarly journals ASSESSMENT OF THE QUALITY OF DIGITAL TERRAIN MODEL PRODUCED FROM UNMANNED AERIAL SYSTEM IMAGERY

2016 ◽  
Vol XLI-B1 ◽  
pp. 893-899
Author(s):  
M. Kosmatin Fras ◽  
A. Kerin ◽  
M. Mesarič ◽  
V. Peterman ◽  
D. Grigillo
Keyword(s):  
Quality Assessment ◽  
Point Cloud ◽  
Digital Terrain Model ◽  
Quality Parameter ◽  
Unmanned Aerial System ◽  
Test Field ◽  
Absolute Deviation ◽  
Terrain Model ◽  
Digital Terrain

Production of digital terrain model (DTM) is one of the most usual tasks when processing photogrammetric point cloud generated from Unmanned Aerial System (UAS) imagery. The quality of the DTM produced in this way depends on different factors: the quality of imagery, image orientation and camera calibration, point cloud filtering, interpolation methods etc. However, the assessment of the real quality of DTM is very important for its further use and applications. In this paper we first describe the main steps of UAS imagery acquisition and processing based on practical test field survey and data. The main focus of this paper is to present the approach to DTM quality assessment and to give a practical example on the test field data. For data processing and DTM quality assessment presented in this paper mainly the in-house developed computer programs have been used. The quality of DTM comprises its accuracy, density, and completeness. Different accuracy measures like RMSE, median, normalized median absolute deviation and their confidence interval, quantiles are computed. The completeness of the DTM is very often overlooked quality parameter, but when DTM is produced from the point cloud this should not be neglected as some areas might be very sparsely covered by points. The original density is presented with density plot or map. The completeness is presented by the map of point density and the map of distances between grid points and terrain points. The results in the test area show great potential of the DTM produced from UAS imagery, in the sense of detailed representation of the terrain as well as good height accuracy.

scholarly journals Threat of Pollution Hotspots Reworking in River Systems: Case Study of the Ploučnice River (Czech Republic)

2019 ◽  
Vol 8 (1) ◽  
pp. 37 ◽  
Author(s):  
Jitka Elznicová ◽  
Tomáš Matys Grygar ◽  
Jan Popelka ◽  
Martin Sikora ◽  
Petr Novák ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Digital Terrain Model ◽  
Terrain Model ◽  
Non Invasive ◽  
Digital Terrain ◽  
Quality Of Water ◽  
Lateral Channel ◽  
Floodplain Development ◽  
Channel Deposits

As fluvial pollution may endanger the quality of water and solids transported by rivers, mapping and evaluation of historically polluted fluvial sediments is an urgent topic. The Ploučnice River and its floodplain were polluted by local uranium mining from 1971–1989. We have studied this river since 2013 using a combination of diverse methods, including geoinformatics, to identify pollution hotspots in floodplains and to evaluate the potential for future reworking. Archival information on pollution history and past flooding was collected to understand floodplain dynamics and pollution heterogeneity. Subsequently, a digital terrain model based on laser scanning data and data analysis were used to identify the sites with river channel shifts. Finally, non-invasive geochemical mapping was employed, using portable X-ray fluorescence and gamma spectrometers. The resulting datasets were processed with geostatistical tools. One of the main outputs of the study was a detailed map of pollution distribution in the floodplain. The results showed a relationship between polluted sediment deposition, past channel shifts and floodplain development. We found that increased concentration of pollution occurred mainly in the cut-off meanders and lateral channel deposits from the mining period, the latter in danger of reworking (reconnecting to the river) in the coming decades.

scholarly journals Can analytical shading be art?

2015 ◽  
Vol 47 (3) ◽  
pp. 121-135
Author(s):  
Jerzy Siwek ◽  
Wojciech Wacławik
Keyword(s):  
Experimental Studies ◽  
Digital Terrain Model ◽  
Crucial Importance ◽  
Significant Similarity ◽  
Basic Principles ◽  
Factors Affecting ◽  
Terrain Model ◽  
Digital Terrain ◽  
Proper Generalization

Abstract Despite numerous theoretical and experimental studies of analytical relief shading, devised about half a century ago, its quality has not yet reached the excellence of traditional (manual) shading. The paper discusses its basic principles and the main factors affecting the quality of shading. It also stresses the crucial importance of the digital terrain model used as the basis for shading as well as the proper generalization of the relief. Experiments with shading modules of ArcGIS and Surfer, aiming to explore the functionality of algorithms they employ, have demonstrated significant similarity of the results. In conclusion, the authors attempt to answer the question posted in the title of the article. In their view, analytical shading is not art because shading algorithms are incapable of producing the visually beautiful effects that an experienced cartographer with artistic talents can create.

scholarly journals Analysis of the current state of unstable geomorphological structures with modern methods

2020 ◽  
Vol 13 (1) ◽  
pp. 195-199
Author(s):  
Vyacheslav V. Dolotov ◽  
Yuri N. Goryachkin ◽  
Andrey V. Dolotov
Keyword(s):  
Time Perspective ◽  
Digital Terrain Model ◽  
Aerial Photographs ◽  
Detailed Data ◽  
Terrain Model ◽  
Digital Terrain ◽  
Current State ◽  
The Status ◽  
The Mathematical Model

The paper gives results of the digitization of the status and spatial position of a cliff in the Western Crimea coastal zone. The modern equipment and methods accelerate the survey from the time perspective and improve the quality of the outcomes; namely a high precision GNSS receiver in RTK mode and PHANTOM-3 PRO copter. The digital terrain model was generated with used the Agisoft Photoscan software. The paper shows that the precision of the mathematical model of the relief constructed by aerial photographs provides more detailed data in comparison to those obtained in the field observations. Furthermore, aerial photography makes it possible to calculate the number of spatial characteristics of hazardous for surveying and latent natural objects out of reach for an on-location investigation. As a result, the very detailed data about current condition of dangerous cliff were obtained. The paper also evaluates the linear and volumetric characteristics of cleavages that are prone to collapse.

scholarly journals Accuracy Assessment of Digital Terrain Model Datasets Sources for Hydrogeomorphological Modelling at Mediterranean Catchments

2018 ◽  
Author(s):  
Lukas Graf ◽  
Mariano Moreno-de las Heras ◽  
Maurici Ruiz ◽  
Josep Fortesa ◽  
Aleix Calsamiglia ◽  
...  
Keyword(s):  
Mean Squared Error ◽  
Accuracy Assessment ◽  
Digital Terrain Model ◽  
Airborne Lidar ◽  
Stream Network ◽  
Terrain Model ◽  
Human Land Use ◽  
Aster Gdem ◽  
Digital Terrain ◽  
Vertical Accuracy

Digital Terrain Models (DTMs) are currently a fundamental source of information in Earth Sciences. However, DTM-based studies can contain remarkable biases if limitations and inaccuracies of these models are disregarded. In this work, four freely available datasets such as SRTM C-SAR DEM, ASTER GDEM V2 and two airborne LiDAR derived DTMs (at 5 and 1 m spatial resolution, respectively) were analysed in a comparative study in three geomorphologically contrasted catchments located in Mediterranean geoecosystems under intensive human land use influence. Vertical accuracy as well as the influence of each dataset characteristics on hydrological and geomorphological modelling applicability were assessed by using classic geometric and morphometric parameters and the more recently proposed index of sediment connectivity. Overall vertical accuracy – expressed as Root Mean Squared Error (RMSE) and Normalized Median Deviation (NMAD) – revealed the highest accuracy in the cases of the 1 m (RMSE = 1.55 m; NMAD = 0.44 m) and 5 m LiDAR DTMs (RMSE = 1.73 m; NMAD = 0.84 m). Vertical accuracy of SRTM was lower (RMSE = 6.98 m; NMAD = 5.27 m) but considerably higher than in the case of ASTER (RMSE = 16.10 m; NMAD = 11.23 m). All datasets were affected by systematic distortions. As a consequence, propagation of these errors caused negative impacts on flow routing, stream network and catchment delineation and, to a lower extent, on the distribution of slope values. These limitations should be carefully considered when applying DTMs for hydrogeomorphological modelling.

scholarly journals EVALUATING ERROR OF LIDAR DERIVED DEM INTERPOLATION FOR VEGETATION AREA

2016 ◽  
Vol XLII-4/W1 ◽  
pp. 141-150 ◽  
Author(s):  
Z. Ismail ◽  
M. F. Abdul Khanan ◽  
F. Z. Omar ◽  
M. Z. Abdul Rahman ◽  
M. R. Mohd Salleh
Keyword(s):  
Spatial Resolution ◽  
Accuracy Assessment ◽  
Digital Terrain Model ◽  
Geographical Information ◽  
Interpolation Methods ◽  
Terrain Model ◽  
Digital Terrain ◽  
Digital Elevation ◽  
Elevation Model ◽  
Slope Class

Light Detection and Ranging or LiDAR data is a data source for deriving digital terrain model while Digital Elevation Model or DEM is usable within Geographical Information System or GIS. The aim of this study is to evaluate the accuracy of LiDAR derived DEM generated based on different interpolation methods and slope classes. Initially, the study area is divided into three slope classes: (a) slope class one (0° – 5°), (b) slope class two (6° – 10°) and (c) slope class three (11° – 15°). Secondly, each slope class is tested using three distinctive interpolation methods: (a) Kriging, (b) Inverse Distance Weighting (IDW) and (c) Spline. Next, accuracy assessment is done based on field survey tachymetry data. The finding reveals that the overall Root Mean Square Error or RMSE for Kriging provided the lowest value of 0.727 m for both 0.5 m and 1 m spatial resolutions of oil palm area, followed by Spline with values of 0.734 m for 0.5 m spatial resolution and 0.747 m for spatial resolution of 1 m. Concurrently, IDW provided the highest RMSE value of 0.784 m for both spatial resolutions of 0.5 and 1 m. For rubber area, Spline provided the lowest RMSE value of 0.746 m for 0.5 m spatial resolution and 0.760 m for 1 m spatial resolution. The highest value of RMSE for rubber area is IDW with the value of 1.061 m for both spatial resolutions. Finally, Kriging gave the RMSE value of 0.790m for both spatial resolutions.

scholarly journals ACCURACY ASSESSMENT OF LIDAR-DERIVED DIGITAL TERRAIN MODEL (DTM) WITH DIFFERENT SLOPE AND CANOPY COVER IN TROPICAL FOREST REGION

2015 ◽  
Vol II-2/W2 ◽  
pp. 183-189 ◽  
Author(s):  
M. R. M. Salleh ◽  
Z. Ismail ◽  
M. Z. A. Rahman
Keyword(s):  
Tropical Forest ◽  
Digital Terrain Model ◽  
Canopy Cover ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Terrain Model ◽  
Digital Terrain ◽  
Terrain Slope ◽  
Airborne Lidar Data

Airborne Light Detection and Ranging (LiDAR) technology has been widely used recent years especially in generating high accuracy of Digital Terrain Model (DTM). High density and good quality of airborne LiDAR data promises a high quality of DTM. This study focussing on the analysing the error associated with the density of vegetation cover (canopy cover) and terrain slope in a LiDAR derived-DTM value in a tropical forest environment in Bentong, State of Pahang, Malaysia. Airborne LiDAR data were collected can be consider as low density captured by Reigl system mounted on an aircraft. The ground filtering procedure use adaptive triangulation irregular network (ATIN) algorithm technique in producing ground points. Next, the ground control points (GCPs) used in generating the reference DTM and these DTM was used for slope classification and the point clouds belong to non-ground are then used in determining the relative percentage of canopy cover. The results show that terrain slope has high correlation for both study area (0.993 and 0.870) with the RMSE of the LiDAR-derived DTM. This is similar to canopy cover where high value of correlation (0.989 and 0.924) obtained. This indicates that the accuracy of airborne LiDAR-derived DTM is significantly affected by terrain slope and canopy caver of study area.

Sign in / Sign up

Export Citation Format

Share Document