scholarly journals ERRORS MEASUREMENT OF INTERPOLATION METHODS FOR GEOID MODELS: STUDY CASE IN THE BRAZILIAN REGION

2018 ◽  
Vol 24 (1) ◽  
pp. 44-57
Author(s):  
Daniel Arana ◽  
Fabricio dos Santos Prol ◽  
Paulo de Oliveira Camargo ◽  
Gabriel do Nascimento Guimarães
Keyword(s):  
Neural Networks ◽  
Interpolation Method ◽  
Equipotential Surface ◽  
Regular Grid ◽  
Practical Applications ◽  
Interpolation Methods ◽  
Study Case ◽  
Geoid Undulations ◽  
Extract Information

Abstract: The geoid is an equipotential surface regarded as the altimetric reference for geodetic surveys and it therefore, has several practical applications for engineers. In recent decades the geodetic community has concentrated efforts on the development of highly accurate geoid models through modern techniques. These models are supplied through regular grids which users need to make interpolations. Yet, little information can be obtained regarding the most appropriate interpolation method to extract information from the regular grid of geoidal models. The use of an interpolator that does not represent the geoid surface appropriately can impair the quality of geoid undulations and consequently the height transformation. This work aims to quantify the magnitude of error that comes from a regular mesh of geoid models. The analysis consisted of performing a comparison between the interpolation of the MAPGEO2015 program and three interpolation methods: bilinear, cubic spline and neural networks Radial Basis Function. As a result of the experiments, it was concluded that 2.5 cm of the 18 cm error of the MAPGEO2015 validation is caused by the use of interpolations in the 5'x5' grid.

Research on DEM Construction Method of Interpolation

2013 ◽  
Vol 416-417 ◽  
pp. 1470-1474
Author(s):  
Shi Qing Yang ◽  
Lan Fang Miao
Keyword(s):  
Interpolation Method ◽  
Construction Method ◽  
Measured Data ◽  
Terrain Analysis ◽  
Data Interpolation ◽  
Construction Quality ◽  
The Real ◽  
Interpolation Methods ◽  
Inverse Distance

DEM construction quality directly affects a variety of applications based on DEM and terrain analysis. Giving the error in measured data, interpolation methods affect the quality of DEM. Therefore, for a certain district, choosing a better interpolation method is very important. In this paper, we constructed new DEM by three interpolation methods (inverse distance weight, spline, Kriging) on the real DEM data of loess tableland. By comparing this new DEM with the original DEM and analyzing this new DEM, we can get a better choice of interpolation for DEM construction and terrain analysis for a certain district.

The machine training in problems of satellite images’s processing

Metrologiya ◽  
2020 ◽  
pp. 15-37
Author(s):  
L. P. Bass ◽  
Yu. A. Plastinin ◽  
I. Yu. Skryabysheva
Keyword(s):  
Remote Sensing ◽  
Neural Networks ◽  
Computer Vision ◽  
Satellite Images ◽  
Vision Systems ◽  
Earth Remote Sensing ◽  
Practical Applications ◽  
Convolution Neural Networks ◽  
Computer Vision Systems ◽  
Trained Neural Network

Use of the technical (computer) vision systems for Earth remote sensing is considered. An overview of software and hardware used in computer vision systems for processing satellite images is submitted. Algorithmic methods of the data processing with use of the trained neural network are described. Examples of the algorithmic processing of satellite images by means of artificial convolution neural networks are given. Ways of accuracy increase of satellite images recognition are defined. Practical applications of convolution neural networks onboard microsatellites for Earth remote sensing are presented.

An Efficient Hybrid Forecasting Approach for Wind Speed Time Series

2017 ◽  
Vol 7 (9) ◽  
pp. 13
Author(s):  
Bhargavi Munnaluri ◽  
K. Ganesh Reddy
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Wind Speed ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Support Vector ◽  
Hybrid Forecasting ◽  
Artificial Neural ◽  
Future Utilization

Wind forecasting is one of the best efficient ways to deal with the challenges of wind power generation. Due to the depletion of fossil fuels renewable energy sources plays a major role for the generation of power. For future management and for future utilization of power, we need to predict the wind speed.  In this paper, an efficient hybrid forecasting approach with the combination of Support Vector Machine (SVM) and Artificial Neural Networks(ANN) are proposed to improve the quality of prediction of wind speed. Due to the different parameters of wind, it is difficult to find the accurate prediction value of the wind speed. The proposed hybrid model of forecasting is examined by taking the hourly wind speed of past years data by reducing the prediction error with the help of Mean Square Error by 0.019. The result obtained from the Artificial Neural Networks improves the forecasting quality.

A unified framework for automated person re-indentification

2020 ◽  
Vol 71 (7) ◽  
pp. 868-880
Author(s):  
Nguyen Hong-Quan ◽  
Nguyen Thuy-Binh ◽  
Tran Duc-Long ◽  
Le Thi-Lan
Keyword(s):  
Deep Learning ◽  
Video Analysis ◽  
Camera Network ◽  
Unified Framework ◽  
Person Detection ◽  
Practical Applications ◽  
Detection And Tracking ◽  
Analysis System ◽  
Bounding Boxes

Along with the strong development of camera networks, a video analysis system has been become more and more popular and has been applied in various practical applications. In this paper, we focus on person re-identification (person ReID) task that is a crucial step of video analysis systems. The purpose of person ReID is to associate multiple images of a given person when moving in a non-overlapping camera network. Many efforts have been made to person ReID. However, most of studies on person ReID only deal with well-alignment bounding boxes which are detected manually and considered as the perfect inputs for person ReID. In fact, when building a fully automated person ReID system the quality of the two previous steps that are person detection and tracking may have a strong effect on the person ReID performance. The contribution of this paper are two-folds. First, a unified framework for person ReID based on deep learning models is proposed. In this framework, the coupling of a deep neural network for person detection and a deep-learning-based tracking method is used. Besides, features extracted from an improved ResNet architecture are proposed for person representation to achieve a higher ReID accuracy. Second, our self-built dataset is introduced and employed for evaluation of all three steps in the fully automated person ReID framework.

Predictive performance modeling of Habesha brewery wastewater treatment plant using artificial neural networks

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Neural Networks ◽  
Water Quality ◽  
Wastewater Treatment ◽  
Artificial Neural Networks ◽  
Performance Modeling ◽  
Predictive Performance ◽  
Mathematical Tool ◽  
Effluent Water ◽  
Artificial Neural

Recently, process control in wastewater treatment plants (WWTPs) is, mostly accomplished through examining the quality of the water effluent and adjusting the processes through the operator’s experience. This practice is inefficient, costly and slow in control response. A better control of WTPs can be achieved by developing a robust mathematical tool for performance prediction. Due to their high accuracy and quite promising application in the field of engineering, Artificial Neural Networks (ANNs) are attracting attention in the domain of WWTP predictive performance modeling. This work focuses on applying ANN with a feed-forward, back propagation learning paradigm to predict the effluent water quality of the Habesha brewery WTP. Data of influent and effluent water quality covering approximately an 11-month period (May 2016 to March 2017) were used to develop, calibrate and validate the models. The study proves that ANN can predict the effluent water quality parameters with a correlation coefficient (R) between the observed and predicted output values reaching up to 0.969. Model architecture of 3-21-3 for pH and TN, and 1-76-1 for COD were selected as optimum topologies for predicting the Habesha Brewery WTP performance. The linear correlation between predicted and target outputs for the optimal model architectures described above were 0.9201 and 0.9692, respectively.

Comparative analysis of intelligent planning methods

2012 ◽  
Vol 9 (2) ◽  
pp. 53-57 ◽  
Author(s):  
O.V. Darintsev ◽  
A.B. Migranov
Keyword(s):  
Neural Networks ◽  
Genetic Algorithms ◽  
Fuzzy Logic ◽  
Comparative Analysis ◽  
Mobile Robots ◽  
Sensory Information ◽  
Working Environment ◽  
Planning Methods ◽  
Intelligent Planning

The main stages of solving the problem of planning movements by mobile robots in a non-stationary working environment based on neural networks, genetic algorithms and fuzzy logic are considered. The features common to the considered intellectual algorithms are singled out and their comparative analysis is carried out. Recommendations are given on the use of this or that method depending on the type of problem being solved and the requirements for the speed of the algorithm, the quality of the trajectory, the availability (volume) of sensory information, etc.

Analysis of Non-Linear Activation Functions for Classification Tasks Using Convolutional Neural Networks

2019 ◽  
Vol 12 (3) ◽  
pp. 156-161 ◽  
Author(s):  
Aman Dureja ◽  
Payal Pahwa
Keyword(s):  
Neural Networks ◽  
Deep Neural Networks ◽  
Activation Function ◽  
Primary Objective ◽  
Experimental Comparison ◽  
Activation Functions ◽  
Practical Applications ◽  
Network Activation ◽  
Non Linear ◽  
Hidden Layer

Background: In making the deep neural network, activation functions play an important role. But the choice of activation functions also affects the network in term of optimization and to retrieve the better results. Several activation functions have been introduced in machine learning for many practical applications. But which activation function should use at hidden layer of deep neural networks was not identified. Objective: The primary objective of this analysis was to describe which activation function must be used at hidden layers for deep neural networks to solve complex non-linear problems. Methods: The configuration for this comparative model was used by using the datasets of 2 classes (Cat/Dog). The number of Convolutional layer used in this network was 3 and the pooling layer was also introduced after each layer of CNN layer. The total of the dataset was divided into the two parts. The first 8000 images were mainly used for training the network and the next 2000 images were used for testing the network. Results: The experimental comparison was done by analyzing the network by taking different activation functions on each layer of CNN network. The validation error and accuracy on Cat/Dog dataset were analyzed using activation functions (ReLU, Tanh, Selu, PRelu, Elu) at number of hidden layers. Overall the Relu gave best performance with the validation loss at 25th Epoch 0.3912 and validation accuracy at 25th Epoch 0.8320. Conclusion: It is found that a CNN model with ReLU hidden layers (3 hidden layers here) gives best results and improve overall performance better in term of accuracy and speed. These advantages of ReLU in CNN at number of hidden layers are helpful to effectively and fast retrieval of images from the databases.

scholarly journals Sensuator: A Hybrid Sensor–Actuator Approach to Soft Robotic Proprioception Using Recurrent Neural Networks

Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 30
Author(s):  
Pornthep Preechayasomboon ◽  
Eric Rombokas
Keyword(s):  
Neural Networks ◽  
Recurrent Neural Networks ◽  
Linear Models ◽  
Open Loop ◽  
Proof Of Concept ◽  
State Estimator ◽  
Loop Control ◽  
Practical Applications ◽  
Soft Actuator ◽  
The Cost

Soft robotic actuators are now being used in practical applications; however, they are often limited to open-loop control that relies on the inherent compliance of the actuator. Achieving human-like manipulation and grasping with soft robotic actuators requires at least some form of sensing, which often comes at the cost of complex fabrication and purposefully built sensor structures. In this paper, we utilize the actuating fluid itself as a sensing medium to achieve high-fidelity proprioception in a soft actuator. As our sensors are somewhat unstructured, their readings are difficult to interpret using linear models. We therefore present a proof of concept of a method for deriving the pose of the soft actuator using recurrent neural networks. We present the experimental setup and our learned state estimator to show that our method is viable for achieving proprioception and is also robust to common sensor failures.

scholarly journals Improving Web QoE Monitoring for Encrypted Network Traffic through Time Series Modeling

2021 ◽  
Vol 48 (4) ◽  
pp. 37-40
Author(s):  
Nikolas Wehner ◽  
Michael Seufert ◽  
Joshua Schuler ◽  
Sarah Wassermann ◽  
Pedro Casas ◽  
...  
Keyword(s):  
Neural Networks ◽  
Time Series ◽  
Recurrent Neural Networks ◽  
Quality Of Experience ◽  
Unique Feature ◽  
Time Series Modeling ◽  
Web Browsing ◽  
Large Dataset ◽  
Efficient Approximation

This paper addresses the problem of Quality of Experience (QoE) monitoring for web browsing. In particular, the inference of common Web QoE metrics such as Speed Index (SI) is investigated. Based on a large dataset collected with open web-measurement platforms on different device-types, a unique feature set is designed and used to estimate the RUMSI - an efficient approximation to SI, with machinelearning based regression and classification approaches. Results indicate that it is possible to estimate the RUMSI accurately, and that in particular, recurrent neural networks are highly suitable for the task, as they capture the network dynamics more precisely.

scholarly journals Toward an Automatic Quality Assessment of Voice-Based Telemedicine Consultations: A Deep Learning Approach

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3279
Author(s):  
Maria Habib ◽  
Mohammad Faris ◽  
Raneem Qaddoura ◽  
Manal Alomari ◽  
Alaa Alomari ◽  
...  
Keyword(s):  
Neural Networks ◽  
Deep Learning ◽  
Quality Assessment ◽  
Transcript Level ◽  
Assessment Process ◽  
Classification Model ◽  
Systematic Evaluation ◽  
Transcript Levels ◽  
Perceptual Evaluation

Maintaining a high quality of conversation between doctors and patients is essential in telehealth services, where efficient and competent communication is important to promote patient health. Assessing the quality of medical conversations is often handled based on a human auditory-perceptual evaluation. Typically, trained experts are needed for such tasks, as they follow systematic evaluation criteria. However, the daily rapid increase of consultations makes the evaluation process inefficient and impractical. This paper investigates the automation of the quality assessment process of patient–doctor voice-based conversations in a telehealth service using a deep-learning-based classification model. For this, the data consist of audio recordings obtained from Altibbi. Altibbi is a digital health platform that provides telemedicine and telehealth services in the Middle East and North Africa (MENA). The objective is to assist Altibbi’s operations team in the evaluation of the provided consultations in an automated manner. The proposed model is developed using three sets of features: features extracted from the signal level, the transcript level, and the signal and transcript levels. At the signal level, various statistical and spectral information is calculated to characterize the spectral envelope of the speech recordings. At the transcript level, a pre-trained embedding model is utilized to encompass the semantic and contextual features of the textual information. Additionally, the hybrid of the signal and transcript levels is explored and analyzed. The designed classification model relies on stacked layers of deep neural networks and convolutional neural networks. Evaluation results show that the model achieved a higher level of precision when compared with the manual evaluation approach followed by Altibbi’s operations team.

Sign in / Sign up

Export Citation Format

Share Document