Effects of Postemergence and Postemergence-Directed Halosulfuron on Triploid Watermelon (Citrullus Lanatus)

2008 ◽  
Vol 22 (3) ◽  
pp. 467-471 ◽  
Author(s):  
Peter J. Dittmar ◽  
David W. Monks ◽  
Jonathan R. Schultheis ◽  
Katherine M. Jennings
Keyword(s):  
Citrullus Lanatus ◽  
Distal Region ◽  
Fruit Weight ◽  
Proximal Region ◽  
Growth And Yield ◽  
Crop Plant ◽  
Fruit Number ◽  
Crop Tolerance ◽  
Triploid Watermelon ◽  
Marketable Fruit

Studies were conducted in 2006 at Clinton and Kinston, NC, to determine the influence of halosulfuron POST (over the crop plant) or POST-directed (to the crop) on growth and yield of transplanted ‘Precious Petite’ and ‘Tri-X-313’ triploid watermelon. Treatments included a nontreated control, 39 g/ha halosulfuron applied POST-directed to 25% of the plant (distal or proximal region), POST-directed to 50% of the plant (distal or proximal; Precious Petite only), and POST. Watermelon treated with halosulfuron displayed chlorotic leaves, shortened internodes, and increased stem splitting. Vines were longest in the nontreated control (Tri-X-313 = 146 cm, Precious Petite = 206 cm) but were shortest in the POST treatment (Tri-X-313 = 88 cm, Precious Petite = 77 cm). Halosulfuron POST to watermelon caused the greatest injury (Tri-X-313 = 64%, Precious Petite = 67%). Halosulfuron directed to 25 or 50% (distal or proximal) of the plant caused less injury than halosulfuron applied POST. Stem splitting was greatest when halosulfuron was applied to the proximal area of the stem compared with POST-directed distal or POST. Internode shortening was greatest in treatments where halosulfuron was applied to the distal region of the stem. However, Tri-X-313 in the POST-directed 25% distal treatment produced similar total and marketable fruit weight as the nontreated control at Clinton. Fruit number did not differ among treatments for either cultivar. At Kinston, Precious Petite nontreated control and POST-directed 25% distal end treatment had greater marketable fruit weight than the POST-directed 50% proximal and POST treatments. The current halosulfuron registration allows POST application between rows or PRE. Limiting halosulfuron contact to no more than 25% of the watermelon plant will likely improve crop tolerance.

scholarly journals Heterosis and Inbreeding Depression for Yield of Pickling Cucumber (Cucumis sativus L.) Hybrids

HortScience ◽  
1997 ◽  
Vol 32 (3) ◽  
pp. 450A-450
Author(s):  
Christopher S. Cramer ◽  
Todd C. Wehner
Keyword(s):  
Inbreeding Depression ◽  
The United States ◽  
Fruit Weight ◽  
Summer Season ◽  
Research Station ◽  
Cucumis Sativus L ◽  
Fruit Number ◽  
Pickling Cucumber ◽  
M 12 ◽  
Marketable Fruit

Currently, both hybrid and inbred pickling cucumber cultivars are being grown commercially in the United States. Heterosis for yield in pickling cucumber has been previously reported. However, heterosis has not been repeatable in other studies. The objective of this study was to determine the existence of heterosis and inbreeding depression for yield in pickling cucumber. Six pickling cucumber inbreds (`Addis', `Clinton', M 12, M 20, `Tiny Dill', `Wisconsin SMR 18') were hybridized to form four F1 hybrid families (`Addis × M 20, `Addis' × `Wis. SMR 18', `Clinton' × M 12, M 20 × `Tiny Dill'). Within each family, F2, BC1A and BC1B generations were also formed. Thirty plants of each generation within each family were grown in 3.1-m plots for four replications in the spring and summer seasons of 1996 at the Horticultural Crops Research Station in Clinton, N.C. Data were collected at once-over harvest for total, marketable, and early yield in terms of number (1000 fruit/ha) and weight (Mg/ha). In addition to yield, a fruit shape rating was collected for each plot. High parent heterosis for yield (total and marketable fruit weight) was only observed for `Addis' × `SMR 18' grown in the summer season. The three other families did not exhibit heterosis for total, marketable, and early yield. Heterosis for shape rating was not observed for any family. `Addis' × `Wis. SMR 18' also exhibited inbreeding depression for total fruit weight, marketable fruit weight, early fruit number, and early fruit weight during the spring season and for marketable fruit number and marketable fruit weight during the summer season.

scholarly journals In-row Distance in Triploid Miniwatermelon Cultivars Affects Yield and Quality in Diverse Environments in the Southeastern United States

2009 ◽  
Vol 19 (3) ◽  
pp. 538-545
Author(s):  
Richard L. Hassell ◽  
Jonathan R. Schultheis ◽  
Wilfred R. Jester ◽  
Stephen M. Olson ◽  
Gilbert A. Miller
Keyword(s):  
South Carolina ◽  
Citrullus Lanatus ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Row Spacing ◽  
Marketable Yield ◽  
Yield And Quality ◽  
Marketable Fruit ◽  
Eastern North Carolina ◽  
Location Interaction

The goals of these studies were to determine how miniwatermelon (Citrullus lanatus) cultivars differed and responded to plant in-row spacing in terms of percentage of marketable fruit and yields, and if plant spacing impacted internal fruit quality. Three genetically diverse triploid miniwatermelon cultivars (Mohican, Petite Perfection, and Xite) were selected. These cultivars were evaluated in field locations at northern Florida (Quincy), central South Carolina (Blackville), coastal South Carolina (Charleston), and eastern North Carolina (Kinston) at five within-row distances. Within-row distance included 9, 12, 15, 18, and 21 inches. All plots were15 ft long with row middles 9 ft apart. Fruit were categorized as marketable if they weighed between 3.1 and 9.0 lb per fruit. Within this range further categories were divided as follows: ≤3.0 lb (cull), 3.1 to 5.0 lb (small), 5.1 to 7.0 lb (average), 7.1 to 9.0 lb (large), and ≥9.1 lb (cull). There was a cultivar by location interaction, suggesting that the three cultivars responded differently at each of the four locations. ‘Petite Perfection’ was among the highest yielding at all locations except Quincy, where it was the lowest yielding cultivar. As with total yields, the percentage of marketable fruit was similar for some cultivars across locations. Cultivar Petite Perfection produced the highest percentage of marketable fruit at three of the four locations. The exception was the Quincy site where ‘Xite’ had the highest percentage of marketable fruit. Within-row plant distances and populations affected total marketable yield, both for fruit weight and number per plant, regardless of cultivar and location. As the plant population increased from eight plants per plot (21-inch in-row spacing) to 12 plants per plot (15-inch in-row spacing), total marketable miniwatermelon fruit yields increased in total fruit number as well as total weight. There was a cultivar by location interaction for the percentage of soluble solids and the rind thickness measurements, suggesting that some cultivars responded differently at each of the four locations. Quality effects were more apparent with ‘Mohican’ and ‘Xite’, as they were more responsive to location than ‘Petite Perfection’.

scholarly journals In-row Spacing Influences Triploid Watermelon Yield and Crop Value

2002 ◽  
Vol 12 (3) ◽  
pp. 437-440 ◽  
Author(s):  
Carl E. Motsenbocker ◽  
Ramon A. Arancibia
Keyword(s):  
Cultural Practices ◽  
Citrullus Lanatus ◽  
Fruit Weight ◽  
Row Spacing ◽  
Plastic Mulch ◽  
Marketable Yield ◽  
Farmers Market ◽  
Subsequent Decrease ◽  
Small Fruit ◽  
Triploid Watermelon

Triploid watermelon (Citrullus lanatus), commonly called seedless watermelon, is increasing in popularity and market share. The optimum in-row spacing of triploid watermelon has not been studied previously. Triploid watermelon `Crimson Jewel' and `Honeyheart' were grown with drip-irrigation and black plastic mulch at 1-, 2-, 4-, 6-, and 8-ft (0.3-, 0.6-, 1.2-, 1.8-, and 2.4-m) in-row spacings in 1996 and 2-, 3-, 4-, 5-, 6-, 7-, and 8-ft. (0.6-, 0.9-, 1.2-, 1.5-, 1.8-, 2.1-, and 2.4-m) spacings in 1997 to determine the effect of in-row plant spacing on fruit yield. Marketable yield of `Crimson Jewel' was not affected by in-row spacing while narrower in-row spacing resulted in greater `Honeyheart' yield both years. For both cultivars, narrower spacing resulted in the highest number of fruit per acre, but primarily more extrasmall and small fruit. Fruit number per plant, fruit weight per plant, and individual fruit weight were higher at wider spacings, and yield per acre was lower. The data suggest that triploid watermelon yield, fruit weight and number can be adjusted by in-row spacing. Narrower in-row spacing can maximize yields, depending on the specific grower's cultural practices. In wider in-row spacings, the yield of medium and large fruit is maintained with a subsequent decrease in extra small and small fruit. Gross returns per acre were only different for farmers' market prices, not wholesale, and net returns were not significantly influenced by in-row spacing.

scholarly journals YIELDS AND FRUIT PRODUCTION PATTERNS OF ELEVEN EGGPLANT CULTIVARS

HortScience ◽  
2006 ◽  
Vol 41 (3) ◽  
pp. 515C-515
Author(s):  
Brian A. Kahn ◽  
Mark E. Payton
Keyword(s):  
Field Study ◽  
Fruit Quality ◽  
Solanum Melongena ◽  
Fruit Production ◽  
Fruit Weight ◽  
Fruit Number ◽  
Two Factors ◽  
Marketable Fruit ◽  
Black Beauty ◽  
Over Time

Eggplants (Solanum melongena L.) were grown from transplants in a field study at Bixby, Okla., in 2005. Plants were harvested twice a week for 7 weeks. Data were taken from 3 individual plants per plot × 11 cultivars × 3 replications. The open-pollinated `Black Beauty' was inferior to the hybrids for yield and fruit quality. Patterns of cumulative percent marketable fruit number did not differ for 3 of the 4 cultivars producing the numerically highest (not always statistically highest) marketable fruit weights per plant (`Classic', `Nadia', and `Santana'). `Dusky' was the exception; fruit number peaked relatively early, but it still totaled among the highest for marketable fruit weight per plant. This might be considered an efficient fruiting pattern. Apart from `Dusky', a relatively high cumulative percent marketable fruit number throughout the season tended to be associated with an intermediate to low marketable fruit weight per plant. Two factors usually were responsible for this pattern: relatively low average marketable fruit weight, or high cull production. Despite significant differences in individual marketable fruiting patterns and average fruit weights, one relatively simple curvilinear model gave an excellent estimation of total and marketable eggplant fruit production (respectively) over time. The model was pct = 1/(1+exp(-(a+b*day))), where pct = estimated cumulative percent based on number of fruit, a = intercept, and b = slope.

scholarly journals Use of Commercially Available Pollenizers for Optimizing Triploid Watermelon Production

HortScience ◽  
2010 ◽  
Vol 45 (4) ◽  
pp. 541-545 ◽  
Author(s):  
Peter J. Dittmar ◽  
David W. Monks ◽  
Jonathan R. Schultheis
Keyword(s):  
Citrullus Lanatus ◽  
Hollow Heart ◽  
Fruit Yield ◽  
The Other ◽  
Yield And Quality ◽  
Triploid Watermelon ◽  
Marketable Fruit ◽  
The Hill ◽  
Pollen Movement ◽  
Selection Of

An experiment was conducted during 2005 and 2006 in Kinston, NC, with the objective of maximizing triploid watermelon [Citrullus lanatus (Thunb.) Matsum. and Nak.] fruit yield and quality by optimizing the choice and use of pollenizers. Treatments were pollenizer cultivars planted singly [‘Companion’, ‘Super Pollenizer 1’ (‘SP1’), ‘Summer Flavor 800’ (‘SF800’), and ‘Mickylee’] or in pairs (‘Companion’ + ‘SP1’, ‘Companion’ + ‘SF800’, and ‘SP1’ + ‘SF800’). All pollenizers from these seven treatments were interplanted with the triploid cultivar Tri-X-313. Planting arrangement was compared by establishing ‘SF800’ in a hill versus an interplanted field arrangement. Effect of pollenizer establishment timing on triploid fruit yields and quality was evaluated by establishing ‘SP1’ 3 weeks after planting and comparing it with the establishment of ‘SP1’ at the time of triploid plant establishment. Finally, a triploid planting with no pollenizer (control) was included to determine pollen movement. Fruit yield from the control was 22% or less of yield of the other treatments containing a pollenizer and less than 10% in the initial or early harvests. Pollen movement was minimal among plots and differences in yield and fruit quality could be attributed to pollenizer treatment. In 2005, the use of ‘Companion’, ‘SP1’, or ‘Mickylee’ as pollenizers produced similar total yields, whereas ‘SF800’ produced the lowest yield. In 2005, ‘Companion’ produced more large fruit than the other individual pollenizer treatments. Combining the pollenizers generally did not enhance triploid yields or quality. Interplanting of pollenizers consistently resulted in greater yield compared with the hill system. Late planting of ‘SP1’ increased the incidence of hollow heart in the marketable fruit and decreased yield compared with simultaneously planting ‘SP1’ and triploid plants. Thus, selection of pollenizer, planting arrangement, and time of pollenizer establishment are all important considerations to optimizing triploid yield and quality.

scholarly journals Effects of salicylic and benzoic acid on yield and yield components of moisture stressed tomato (solanum lycopersicun l.) at Kadawa Sudan Savannah

2021 ◽  
Vol 14 (1) ◽  
pp. 142-151
Author(s):  
H.M. Isa ◽  
A.A. Manga
Keyword(s):  
Salicylic Acid ◽  
Moisture Stress ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Benzoic Acids ◽  
Plot Size ◽  
Fruit Setting ◽  
Marketable Fruit ◽  
Fruit Diameter

Salicylic acid and Benzoic acids are antitranpirants usually used to reduce the rate of moisture loss and increase productivity of irrigated crops. To test antitranspiracy of Salicylic and Benzoic acids, field experiments were conducted during the two successive dry Seasons of 2011/2012 and 2012/2013 at the Agricultural Research Station Farm, Kadawa (11̊ 38ʹ 40.3ʺ N,8̊ 25ʹ3.9ʺ E) 498m elevation above sea level. The aim was to study the effects of antitranspirants and moisture stress on crop growth and development stages of tomato. The treatments consisted of two antitranspirants at four different concentrations of 0, 200, 400 and 600 ppm, and three moisture stress stages, vegetative, flowering and fruit setting. Antitranspirants and moisture stresses were assigned to the main plot and concentrations were used as sub–plot treatment. These were replicated three times and laid out in a split-plot design. The gross plot size was 3.6m x 3.0m (10.8m2) consisting of 6 rows of 3m length, while the net plot size was 1.2m 1.8m (2.16 m2) consisting of 2 inner most rows. Data were taken on tomato growth and yield attributes. Data generated were analysed using statistical analytics software (SAS). The results of the study revealed that application of both Antitranspirants enhanced growth and yield components such as fruit diameter, number of fruits plant1, average fruit weight, marketable fruit yield and total fruit yield of tomato. Significant interactions between and among the factors were also recorded for fruit diameter, number of fruits plant-1 marketable fruit yield and the total fruit yield. Application of 200 and 400 ppm of of Salicylic acid at fruit setting produced the highest total fruit yield (6.66 tha-1) which was statistically similar to 600 ppm of Benzoic (6.10 t ha-1) at flowering while the control had the lowest. Total fruit yield was positively and significantly correlated with number of fruit plant-1 and average fruit weight. Number of fruits plant-1 was found to have the highest direct contribution to the yield. Flowering and fruiting stages were found to be the critical growth stages for moisture stress of tomato. Foliar application of 400 ppm of Salicylic acid at fruit setting stage appeared to promote tomato yield in the study area.

scholarly journals Growth and yield performance of hybrid tomato (Solanum lycopersicum L.) lines at Parwanipur, Bara, Nepal

2020 ◽  
Vol 3 (1) ◽  
pp. 180-189
Author(s):  
Suraj Gurung ◽  
Prabin Adhikari ◽  
Kushal Giri ◽  
Tek Prasad Gotame ◽  
Surendra Lal Shrestha
Keyword(s):  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Research Station ◽  
Higher Plant ◽  
Yield Performance ◽  
Solanum Lycopersicum L ◽  
Hybrid Variety ◽  
Marketable Fruit

An experiment was conducted to evaluate the performance of hybrid tomato lines on growth and yield performance at Regional Agriculture research Station (RARS), Parwanipur, Nepal during end of September, 2018 to April, 2019. The experiment was laid out in randomized complete block design (RCBD) with seven hybrid tomato lines as treatments and three replications. The tested lines included Srijana and Dalila as check varieties and other lines, developed by crossing HRA and HRD lines which showed better performance under late blight conditions. HRA 20× HRD 1 showed significantly higher plant height (110.67 cm) which was statistically at par with genotype HRA 14× HRD 7. The highest number of fruits per plant (69) was recorded from Srijana whereas the lowest number of fruits per plant (37) was recorded from cv. HRA20 × HRD1. The fruit yield of the lines ranged from 50.54 t/ha to 32.2 t/ha with Srijana having the highest yield and HRA 20× HRD 1 as the lowest. Similar results were shown regarding the marketable fruit yield. However, the highest individual fruit weight (34.67g) was recorded in HRA 14× HRD 7 and the least fruit weight was recorded in Srijana (24.22 g). Results showed that the maximum TSS (5.53 0Brix) was recorded from Dalila which was similar as Srijana. Hence, the overall performance of Srijana was recorded superior regarding both quantitative and qualitative suggesting Srijana as the recommended variety in the given domain. Here authors concluded that Srijana is still a comparatively better hybrid variety in Nepal. 

THE EFFECT OF A WINDBREAK AND MULCH ON THE GROWTH AND YIELD OF PEPPER (Capsicum annuum L.)

1987 ◽  
Vol 67 (1) ◽  
pp. 315-320 ◽  
Author(s):  
STEPHEN MONETTE ◽  
K. A. STEWART
Keyword(s):  
Capsicum Annuum ◽  
Sweet Pepper ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Fresh Weight ◽  
Fruit Number ◽  
Capsicum Annuum L ◽  
Distance Data ◽  
Polyethylene Mulch

Experiments using an artificial windbreak and polyethylene mulch were conducted in 1983 and 1984 with sweet pepper in Ste-Anne de Bellevue, Quebec. When analyses were conducted on pooled distance data plant fresh weight was increased by sheltering but not by mulching. In 1983, the windbreak increased yields up to a distance 24 times the windbreak height but only if plants were not mulched. Yield increases were due to greater fruit number per plant rather than a greater mean fruit weight. The windbreak had no influence on yield in 1984. Mulching resulted in a significant increase in yield in both years and appeared to be a more reliable practice than the use of windbreaks to increase pepper yields.Key words: Windbreak, paraweb, pepper, Capsicum annuum L.

scholarly journals Mulch Effect on Growth and Yield of Vine Vegetables

2021 ◽  
Vol 3 (1) ◽  
pp. 143-147
Author(s):  
A. K. M. Quamruzzaman ◽  
Ferdouse Islam ◽  
S. R. Mallick
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Research Centre ◽  
Plastic Mulch ◽  
Fruit Number

An experiment was undertaken to identify the suitable mulch paper for different high value vegetables during the winter season of November 2019 to March 2020 at the research farm of Olericulture Division, Horticulture Research Centre, Bangladesh Agricultural Research Institute, Gazipur, Bangladesh. The experiment was randomized complete block design with 3 replications. Three vegetables varieties viz., netted melon, watermelon, cucumber and 3 mulch treatments viz., T1=Silver over black mulch; T2= Black mulch; T3= No mulch were included in this study. Different vegetables responded differently with the changes of mulches irrespective of different characters. Considering relationship between the soil moisture content and fruit number it was clear that fruit number, average fruit weight, fruit length, fruit diameter was strongly related with soil moisture content. The effect of different plastic mulches on fruit weight per plant and yield (t/ha) were significant. Mulching produced higher fruit yield per plant and fruit yield per hectare than for the control, indicating that the mulch had positive effect in generating increased fruit yield. Silver over black plastic mulch produced the highest fruit yield viz., 24.22 t/ha (cucumber), 26.37 t/ha (netted melon), 43.59 t/ha (watermelon) followed by black and no mulches. Obviously, control plot produced the lowest fruit yield.

Effect of Bicyclopyrone on Triploid Watermelon in Plasticulture

2018 ◽  
Vol 32 (4) ◽  
pp. 439-443 ◽  
Author(s):  
Matthew B. Bertucci ◽  
Katherine M. Jennings ◽  
David W. Monks ◽  
David L. Jordan ◽  
Jonathan R. Schultheis ◽  
...  
Keyword(s):  
Weed Management ◽  
Total Yield ◽  
Fruit Size ◽  
Field Studies ◽  
Yield Response ◽  
Marketable Yield ◽  
Fruit Number ◽  
Triploid Watermelon ◽  
Marketable Fruit ◽  
Polyethylene Mulch

AbstractField studies were conducted to determine watermelon tolerance and yield response when treated with bicyclopyrone preplant (PREPLANT), POST, and POST-directed (POST-DIR). Treatments consisted of two rates of bicyclopyrone (37.5 and 50 g ai ha–1), fomesafen (175 g ai ha–1), S-metolachlor (802 g ai ha–1), and a nontreated check. Preplant treatments were applied to formed beds 1 d prior to transplanting and included bicyclopyrone (37.5 and 50 g ha–1) and fomesafen (175 g ha–1), and new polyethylene mulch was subsequently laid above treated beds. POST and POST-DIR treatments were applied 14 ± 1 d after watermelon transplanting and included bicyclopyrone (37.5 and 50 g ha–1) POST and POST-DIR, and S-metolachlor (802 g ai ha–1) POST-DIR. POST-DIR treatments were applied to row middles, ensuring that no herbicide contacted watermelon vines or polyethylene mulch. At 2 wk after transplanting (WAT), 15% foliar bleaching was observed in watermelon treated with bicyclopyrone (50 g ha–1) PRE. At 3 WAT, bicyclopyrone (37.5 and 50 g ha–1) POST caused 16% and 17% foliar bleaching and 8% and 9% crop stunting, respectively. At 4 WAT, initial injury had subsided and bicyclopyrone (37.5 and 50 g ha–1) POST caused 4% and 4% foliar bleaching and 4% and 8% crop stunting, respectively. No symptoms of bleaching or stunting were observed at 6- and 8-WAT ratings. Watermelon total yield, marketable yield, total fruit number, marketable fruit number, and average fruit size were unaffected by herbicide treatments. Therefore, registration of bicyclopyrone (37.5 and 50 g ha–1) PREPLANT, POST, and POST-DIR would offer watermelon producers a safe herbicide option and a novel mode of action for weed management.

Sign in / Sign up

Export Citation Format

Share Document