scholarly journals Morfología polínica de especies de la selva mediana subperennifolia en la cuenca del río Candelaria, Campeche

2019 ◽  
Vol 84 ◽  
pp. 83
Author(s):  
Yajaira De los Angeles Sánchez Dzib ◽  
Susana Sosa Nájera ◽  
María Del Socorro Lozano García

Detailed pollen morphology of 81 species belonging to the semi-evergreen tropical forest of the Candelaria River Basin, Campeche is presented. Pollen morphology of some endemic species from the Yucatan peninsula semi-evergree tropical forest are presented: <em>Diospyros cuneata, Croton icche, Acacia gaumeri, Bauhinia erithrocalyx, Calliandra houstoniana, Lonchocarpus longistylus, Trichilia minutifl ora, Coccoloba refl exifl ora, Neomillispaughia emarginata, Randia longiloba, Talisia fl oresii, Thinouia paucidentata and Pouteria amygdalina </em>. Exine ornamentation, structure, apertures, form and size of the pollen grains are included in the description. Details of ornamentation and apertures are illustrated.

2017 ◽  
Vol 24 (2) ◽  
pp. 129-136 ◽  
Author(s):  
Ebadi-Nahari Mostafa ◽  
Nikzat-Siahkolaee Sedigheh ◽  
Eftekharian Rosa

Pollen morphology of nine species representing four genera: Cephalaria Schrad, Dipsacus L., Pterocephalus Vaill. and Scabiosa L. of the family Dipsacaceae in Iran has been investigated by means of scanning electron microscopy (SEM). The results showed that pollen grains were triporate and tricolpate. The pollen type of Scabiosa rotata Bieb. (tri- and tetraporate) is the first report in the world. The sizes of pollen grains fall into the classification group magna (pollen grain diameter 50–100 μm). Pollen shapes vary from preoblate to prolate and their polar views were triangulate and lobate. The exine ornamentation varies from gemmate in S. rotata to spinulate in the rest studied species. Species of Scabiosa have been dispersed in UPGMA tree that this confirmed the previous studies about taxonomic problems and species complexity in this genus. These results show the transfer of the some Scabisoa species to Lomelosia Raf. based on palynological characters. Pollen morphology of the family is helpful at the generic and specific level.Bangladesh J. Plant Taxon. 24(2): 129–136, 2017 (December)


2015 ◽  
Vol 22 (2) ◽  
pp. 99-110 ◽  
Author(s):  
Maryam Naderifar ◽  
Ali Sonboli ◽  
Abbas Gholipour

Pollen morphology of 11 Iranian Dracocephalum L. species was investigated using light and scanning electron microscopy to evaluate their taxonomic significance for the infrageneric classification of the genus. Pollen grains of all examined taxa were isopolar, hexacolpate, circular in polar view and spheroidal to prolate in equatorial view (P/E = 1.0?2.0). The smallest pollen grains were observed in D. aucheri (P = 29.7 ?m, E = 22.6 ?m), while the largest pollen was found in D. lindbergii (P = 45.1 ?m, E = 33.7 ?m). The highest and lowest apocolpium index (AI) were measured in D. aucheri (AI = 0.27) and D. surmandinum (AI = 0.08), respectively. Colpus membrane was egranulate in all examined species except for D. multicaule and D. ghahremanii. The main exine ornamentation type was characterized as bireticulate including five different subtypes. The results revealed that the exine ornamentation is a diagnostic character useful for the classification of Dracocephalum.Bangladesh J. Plant Taxon. 22(2): 99-110, 2015 (December)


2013 ◽  
Vol 85 (1) ◽  
pp. 147-157 ◽  
Author(s):  
Saulo M. Sousa ◽  
Patrícia M.O. Pierre ◽  
Giovana A. Torres ◽  
Lisete C. Davide ◽  
Lyderson F. Viccini

The pollen morphology and exine structure of 17 species of Lippia L. were investigated in this work using light and scanning electron microscopy. Among the species studied, 14 showed tricolporate pollen grains, two had tri- and tetracolporate pollen grains and a single species exhibited, only tetracolporate pollen. The amb ranged from triangular to square, and the shape varied from oblate-spheroidal to prolate-spheroidal. Three different types of exine ornamentation were observed: psilate, scabrate and perforate. In addition to morphological data, we found positive association between the chromosome numbers and size of pollen grains, and also between the length and width of the colpi. The results indicate that the characteristics of pollen grains in Lippia may be used as an additional taxonomic character of the genus.


Author(s):  
Marina Macukanovic-Jocic ◽  
Snezana Jaric

Palynomorphological characteristics of Campanula lingulata, the Balkan-Carpathian endemic species growing in Serbia, have been investigated using light microscopy and scanning electron microscopy for the first time, in order to provide some information helpful for a better understanding of the taxonomic position of this species within the genus, as well as to contribute to the pollen atlas of Serbian apiflora. The pollen grains are radially symmetrical, isopolar, 3-zonoporate and medium-sized monads oblate-sphaeroidal in shape. Mean of the polar axis (P) is 27.6?1.9 ?m, while the average length of the equatorial axis (E) is 28.8?1.6 ?m. The apertures are operculate. The sculpturing pattern of the exine is microre?ticulate-microechinatae. The exine surface is covered with evenly distributed supratectal spinules of variable length and sparse granules. The longest supratectal spinules are 0.64?0.05 ?m in length and the smallest sculptural elements are less than 0.2 ?m high. The microechinae density per sample area of 5 ?m x 5 ?m averages 17.4?2.4.


Genetika ◽  
2020 ◽  
Vol 52 (1) ◽  
pp. 187-198 ◽  
Author(s):  
Dragan Nikolic ◽  
Dragan Milatovic ◽  
Aleksandar Radovic ◽  
Jugoslav Trajkovic

Morphology and ultrastructure of pollen grains were studied in 13 Obla?inska sour cherry clones in three years using scanning electron microscopy (SEM). All studied clones had isopolar, radially symmetric and tricolpate pollen grains. Length and width of pollen grains varied in a range of 50.03-55.97 ?m and 25.16-28.37 ?m respectively. Pollen shape in all the studied clones was identified as prolate. The smallest colpus length was found in the clone 8 (43.73 ?m), and the highest in the clone 3 (49.16 ?m). The highest colpus and mesocolpium width had the clone 3 (1.73 ?m; 14.87 ?m) and the lowest had the clone 7 (1.46 ?m; 13.78 ?m). All studied clones had striate exine ornamentation. Number of ridges per 100 ?m2 of the exine surface was the highest in the clone 11 (16.7) and lowest in the clone 2 (14.1). Ridge and furrow width ranged from 0.46 to 0.61 ?m and from 0.45 to 0.59 ?m, respectively. The clones have been classified into three clusters based on all studied properties. Pollen grains examination by SEM indicated that several morphological parameters (pollen size and exine characteristics) can be used to distinguish Obla?inska sour cherry clones.


Phytotaxa ◽  
2019 ◽  
Vol 404 (5) ◽  
pp. 171
Author(s):  
MITRA LAL PATHAK ◽  
MUHAMMAD IDREES ◽  
BO XU ◽  
XIN FEN GAO

Pollen morphology of 27 species of Photinia sensu stricto and five closely related genera of subfamily Maloideae (Rosaceae) were studied in detail. Palynomorphological characteristics were examined using scanning electron microscopy (SEM). Comparative pollen analysis was accomplished based on pollen size, shape, polar and equatorial views, polar and equatorial diameter ratio (P/E ratio), width of aperture, and exine ornamentation. The pollen grains of studied species were found to be monad, tricolporate, small to medium in size (P=17.42–30.45 μm, E=9.26–20.18 μm) and to have shapes oblate-spheroidal (0.88–1.0 μm), prolate-spheroidal (1.01–1.14 μm), sub-prolate (1.15–1.33 μm), prolate (1.34–2 μm), and perprolate (>2 μm). The exine ornamentation was perforated-striate, and two different types were identified. The result of quantitative characters has paltry taxonomic importance. The characters studied here delimit at generic level for some genera but not at species level. The obtained result was partially consistent with that of molecular studies published earlier. The pollen size and shape were found to be different between Asian and American species of Photinia. Especially exine sculpture was found to be an important feature to distinguish species of all genera studied. PCA analysis showed that the pollen shape, pollen sculpture, pollen size, and polarity are the key characters to distinguish the species of Photinia and the closely related genera in subfamily Maloideae. Based on pollen exine, two groups (Type I and Type II) were distinguished. The aim of the present study was to find out the taxonomic significance of palynomorphological characteristics in subfamily Maloideae (Rosaceae).


Rodriguésia ◽  
2021 ◽  
Vol 72 ◽  
Author(s):  
Alano César Rocha de Assis ◽  
Eduardo Custódio Gasparino ◽  
Marileide Dias Saba

Abstract In the present work, the pollen morphology of 22 species of Anacardiaceae was analysed, occurring in the state of Bahia, Brazil. The palynological material was obtained from specimens deposited in herbaria. The pollen grains were acetolysed, measured, illustrated and described under light and scanning electron microscopies. The quantitative data were statistically analysed according to sample size. The analysed species presented pollen grains in monads, small to medium sized, isopolar, amb circular to subtriangular, with shapes varying from oblate-spheroidal to prolate, 3-colporate, with fastigium in some species. The exine ornamentation was characterized as psilate, striate, microreticulate-striate, striato-perforate, suprastriato-infra(micro)reticulate. The pollen morphology variation confirms the eurypalynous character of the family. The attributes of the apertures and exine may collaborate in the taxonomic circumscription and provide a clarification of the phylogenetic relationships of the group.


Phytotaxa ◽  
2019 ◽  
Vol 388 (3) ◽  
pp. 212 ◽  
Author(s):  
CAHİT DOĞAN ◽  
EDİBE ÖZMEN BAYSAL

The pollen morphology of nine Limonium species (Plumbaginaceae), occurring along the coastal saline habitats of Turkey, are investigated. Pollen slides were prepared according to the methods of Wodehouse (W) and Erdtman (E) and examined using light microscope. Then pollen grains were placed directly to stubs and covered by gold-palladium mixture for scanning electron analyses. Pollen grains are usually tricolpate, rarely syncolpate, dicolpate, tetracolpate, and pentacolpate. Shape of pollen grains are varing from prolate-sphaeroidal to oblate. Medium to large sized pollen grains of Limonium has long and wide colpi with distinct margins, and acute terminals. Exine structure is semi-tectate and exine ornamentation is microreticulate-microechinate or reticulate-microechinate. Pollen grains of Limonium species have shown variation on colpus type, shape and exine ornamentation. Examined Limonium species can be seperated in three unformal groups according to the palynological features, and their pollen definitions have been done. Besides, a taxonomic key was proposed for quick and accurate identification based on different palyno-morphological characters.


Biologia ◽  
2010 ◽  
Vol 65 (2) ◽  
Author(s):  
Leszek Bednorz ◽  
Irmina Maciejewska-Rutkowska

AbstractTaraxacum pieninicum Pawł. (Asteraceae) is an endemic species, growing only in Pieniny Mts. The aim of the presented work was to investigate its pollen morphology as well as its ultrastructural traits of achene pericarp. Pollen grains of this species were of medium size, echino-lophate and 3-zonocolporate. The external surface of the achene body was of scale sculpture, covered with the spikes. Pappus hairs were not branched, built of a few tubular cells, with acute, protruding ends.


PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0243993
Author(s):  
Irmina Maciejewska-Rutkowska ◽  
Jan Bocianowski ◽  
Dorota Wrońska-Pilarek

The pollen morphology was studied of 24 Salix species native to Poland, which represented two subgenera, 17 sections and five subsections occurring in Poland. The aim of this study was to discover the taxonomical usefulness of the pollen features under analysis, and to investigate the ranges of their interspecific variability. In total, 720 pollen grains were studied. They were analysed with respect to seven quantitative features (length of the polar axis ˗ P, equatorial diameter ˗ E, length of the ectoaperture ˗ Le, exine thickness ˗ Ex, and P/E, Ex/P and Le/P ratios) and the following qualitative ones: pollen outline and exine ornamentation. The most important features were exine ornamentation (muri, lumina and margo) characters. The pollen features should be treated as auxiliary because they allowed to distinguish eight individual Salix species, and five groups of species. Statistical analysis of the studied traits indicated a high variability among the tested species. The most variable biometric features were P, E and Le, while lower variability occurred in P/E, Le/P and d/E.


Sign in / Sign up

Export Citation Format

Share Document