Experience of emulsion explosives manufacturing and use in open pit and underground mines of Kola Mining and Metallurgical Company

2015 ◽  
pp. 64-67
Author(s):  
O. V. Tokarev ◽  
◽  
Kuzenkov M. V. ◽  
R. G. Rastorguev ◽  
M. N. Overchenko ◽  
...  
2021 ◽  
pp. 58-62
Author(s):  
I. F. Bondarenko ◽  
R. Ya. Nikitin ◽  
I. V. Zyryanov

ALROSA performs blasting operations mainly using explosives manufactured on the spot. Considering modern trends of using local manufacture explosives, Company’s experience of application of emulsion explosives, as well as prompt introduction of technological innovations, novel process solutions are utilized in manufacture and use of emulsion explosives. To this effect, Udachny Mining and Processing Plant constructed and commissioned a plant to manufacture non-explosive components for emulsion explosives within the Plant’s infrastructure area. Emulsion explosives enable blasting in open pit and underground mines which are assumed hazardous in terms of oil and gas shows. Within the framework of technical upgrading at MMLT-500-PR Plant, the investment project on construction and commissioning of a modular production line to manufacture packaged emulsion explosives has been implemented. The field trials of NPGM grade emulsion explosive has proved the economic and production efficiency of blasting using this explosive in open pit and underground mining. This article presents the results of testing and application of NPGM emulsion explosive during blasting in open pit and underground mines of ALROSA. The outcomes of pilot explosions using this type explosive as the main borehole and chain charges, as well as intermediate detonators in full-scale conditions of an underground mine and in an open pit are described. The proposed technology features higher operational efficiency and is applicable in various geotechnical conditions of mineral mining.


Author(s):  
G.P. Bersenev ◽  
A.V. Glebov ◽  
V.A. Kutuev

The article reviews the results of the VIII Scientific and Practical Conference with international participation "Technology and Safety of Drilling and Blasting Operations in Surface and Underground Mines of the Urals" which was held at the Ekaterinburg-EXPO Exhibition Center and the Uralasbest Industrial Complex as part of the IX Urals Mining Industry Forum and the URAL MINING' 21 Exhibition dedicated to the Year of Science and Technology in the Russian Federation and the 30th Anniversary of the Urals Mining and Industrial Association. The article also informs about the winners of the Ural Mining Award 2021 and about the research and engineering reports and presentations made during the conference and dedicated to blasting operations. Results are summarized of the visiting seminar at the Uralasbest Industrial Complex, where the Chief Engineer of Promtekhvzvzryv Company N.A. Chistyakov and General Director of the Urals Explosives Association G.P. Bersenev conducted tours to the open-pit mine, the 'Poremit' Plant - the first emulsion explosives production facility in the Urals, a bulk explosives storage, the museum and training center of the Urals Asbestos Mining and Processing Complex. Following the tours of the training center site of the Processing Complex, the second part of the conference was held, during which a number of reports were delivered. Upon completion of the seminar, the Urals Explosives Association awarded honorary certificates and valuable gifts to specialists of the Promtekhvzvzryv Company for their contribution to improvement of drilling and blasting technology and organization of labor on blasting sites. The article is concluded by a summary of the Conference's decisions.


Author(s):  
Hans Tammemagi

Most of the solid waste generated by society ultimately winds up in near-surface landfills. Let us put our thinking caps firmly on, place our prejudices aside, and explore what other methods might be used to dispose of waste. We should seek, in particular, the approaches that best fulfill the three basic principles described in chapter 2. That is, we should strive to find disposal methods that are in accord with sustainable development. Existing and abandoned pits, quarries, and mines are attractive for waste disposal because a hole to contain the wastes has already been excavated. Such abandoned areas, when left unreclaimed, cannot be used for agriculture or other beneficial uses. Thus, they generally do not have significant market value and can often be obtained relatively cheaply. For these reasons, pits and quarries have been extensively used for landfills. Operating and abandoned mines, on which this section focuses, are somewhat similar to pits and quarries, though usually larger. Abandoned mines hold promise as disposal facilities because they are resource areas that have been depleted and thus have little future value. There are two basic types of mine: the open pit mine, which is effectively a large pit or hole in the ground; and the underground mine, where the mined-out openings are deep underground and there is no surface expression except for the shafts used to gain subsurface access. Because underground mines occupy minimal surface land, their use for waste disposal would be in accordance with the sustainable development principles that were advocated in chapter 2. Several European countries, with higher population densities and much smaller land mass than in North America, have long used abandoned underground mines to dispose of their rubbish. The major advantage of placing wastes deep in underground mines is that it is inherently safer than placing the wastes in a surface facility. The amount of groundwater and its flow rate decrease with depth; this fact, combined with the long transport paths back to the biosphere, minimizes the possibility that contaminants will be carried by groundwater to the surface, where they could damage the environment. The waste is contained deeper and more securely.


2021 ◽  
Vol 342 ◽  
pp. 01002
Author(s):  
Ilie-Ciprian Jitea ◽  
Daniela Carmen Rus ◽  
Cristian Rădeanu ◽  
Dragoş Gabriel Vasilescu

When preparing a permitted explosive recipe an energy or an explosive heat is considered, which should ensure the detonability of the system and at the same time a power that satisfies the purpose for which it will be used, under the conditions of firedamp hazardous mines. The safety parameters for the explosive charges used in the firedamp hazardous mines are decisive, in order to ensure the safety and health requirements at work together with the efficient performance of the blasting operation. The permitted explosive type emulsion is recommended to be used in underground mines, open pit mines as a special methane explosive and can be used where a coal dust and/or methane explosion hazard exists can be loaded into dry and wet blasting holes and it can be used for mechanical loading. The permitted explosive type emulsion is a Detonator-sensitive explosives that can be reliably initiated in an unconfined state by a No. 8 strength detonator it have safety handling characteristics because of the relatively low sensitivity to friction, shock and impact. Technological changes due to the change of suppliers of certified explosives for civil use for underground use in the firedamp hazardous mines, involve reassessing the safety and efficiency of the loads made with these products, which have not been tested and evaluated for the conditions from the Jiu Valley mines.


2020 ◽  
Vol 174 ◽  
pp. 01016
Author(s):  
Aleksey Novinkov ◽  
Sergey Protasov ◽  
Pavel Samusev

At present, there are no standard methods for assessing seismic safety of underground mines during blasting on the earth’s surface. The need for such assessments arises when underground mines are located near open-pit coal mines, when the mine fields development is continued into the open pit, and when open surface coal mines use highwall miners. The issues of assessing seismic safety can be complicated by the lack of experimental data on vibration parameters, for example, if the answer is already required at the stage of new mines designing. The paper also provides an analysis of experimental data, including the results of monitoring the state of underground mines during seismic impacts of varying degrees of intensity. It is shown that the spread of the observed PPV, at which local damage or deformation of the underground mines has taken place, attains high values. In the absence of such data for underground mines in specific mining and geological conditions, it is recommended that the maximum allowable PPV vпр be assigned taking into account the class of underground mines and the type of support. At the same time, it is noted that the recommended vпр values given in the literature relate to the openings that were driven in the solid without geological disturbances and anomalies; not deviating from regulatory requirements regarding the state of workings; in the absence of danger of groundwater breakthrough; in the absence of danger of gas-dynamic phenomena, and other negative factors. If this is not the case, according to the requirements of the Federal norms and rules of industrial safety, the seismic safety distance should be increased by 2 times. This requirement is equivalent to multiplying the maximum permissible vibration velocity by a decreasing coefficient k=2b, where the power of two is the regression parameter b obtained from the experimental data processing.


2016 ◽  
Vol 22 (4) ◽  
pp. 13-20
Author(s):  
RACHID KHEBBAB ◽  
SAMIR REMLI ◽  
ISSAM ROUAIGUIA ◽  
AISSA BENSELHOUB

In open pit or underground mines and quarries, especially in mountainous terrain, the choice of the perfect place to install a crushing station requires a decision finalized by a detailed study of the areas close to the quarries such as the water drainage, the morphology of the deposit, the installed capacity, the opening mode of the deposit etc. For this purpose, in this article we will propose an installation of the crushing station of the quarry Djbel El Bordj which serves to save energy throughout the life of the quarry, and also will gain the transportation distance of the stones that determines the number of dumpers needed for planned production.


2020 ◽  
Vol 305 ◽  
pp. 00060
Author(s):  
Sabina Irimie ◽  
Gloria Popescu

Over time, the discovery of the deposit, the exploitation and processing of coal has led to the development and prosperity of many areas called “coal regions”. In the last decades we have witnessed the closing process of many exploitation capacities (underground mines or open pit quarries) with complex socio-economic and even cultural impact in the coal region and on the continent. Debates for or against “coal” with related arguments, policies, strategies and measures at global, regional, national and local level integrate holistically from the “resource” issue to large dynamic systems (energy, climate, urbanism). The relationship between the coal industry and the socio-economic aspects is multifaceted and not yet fully explored. Our paper proposes a statistically documented research on regional development using representative socio-economic indicators. The paper is aiming to present the current socio-economic state in Jiu Valley micro-region, as a result of the structural transformations / changes in the coal industry of Romania’s largest hard coal-fired coal basin.


2020 ◽  
Vol 174 ◽  
pp. 01003
Author(s):  
Eugene Plotnikov ◽  
Valery Kolesnikov ◽  
Zuzana Šimková ◽  
Nuray Demirel

At a number of large open pit mines in Kuzbass, coal production costs have increased due to the deepening of mining operations. In order to reduce them, separate sections of coal mining at the upper horizons are operating or are being designed for mining at low current stripping ratio. For the same purpose, open-pit mining areas at the fields of existing quarries are operated and designed. Examples of such existing and projected areas are: the “Complex Synclinal” area at the Krasnobrodsky surface mine; the “Prirezka” area at the Chernigovsky surface mine; a number open-pit areas at the underground mines; etc. The main factors complicating the involvement in the development of new sites are: the presence of residential areas, industrial buildings and structures near the boundaries of the mining area; power supply lines, transport communications, which limits or excludes the production of mass explosions in the preparation of overburden for excavation; limited size or lack of areas for external dumps at a short distance from the site (in some cases, it is possible to close the mined-out space of the worked-out quarry field). When designing the development of areas characterized by such conditions, it is necessary to consider the application of new technical and technological solutions.


Sign in / Sign up

Export Citation Format

Share Document