scholarly journals INJURY ANALYSIS OF IRAN’S MINING WORKPLACES

2021 ◽  
Vol 36 (1) ◽  
pp. 15-23
Author(s):  
Mohammad Javad Rahimdel
Keyword(s):  
Injury Risk ◽  
Coal Mines ◽  
Health And Safety ◽  
Mining Industry ◽  
Mine Safety ◽  
Occupational Accidents ◽  
Importance Measure ◽  
Vehicle Accidents ◽  
Work Related ◽  
High Level

Mining is a high-risk industry that exposes operators and workers to a high level of occupational health and safety hazards caused by vehicle accidents, blasting, or collapse. This paper aims to analyse the serious and fatal accidents in Iran’s mines over a six-year period, from 2012 to 2017. The data sources were the statistical results of the occupational accidents reported by the National Statistical Centre of Iran and the importance measure of incidents defined by the questionnaires received from the mine safety and health experts. This research presents a model for the prioritization of the mining workplace based on the weighted injury risk of the occupational incidents in the mining industry. The results of this work show that the coal mines of Iran have the highest work-related incidence rate which requires special safety attention. Moreover, the total temporary disability risk is currently at the lowest level in all mining activities, while the fatality risk has significantly increased in the coal mines in recent years. The results obtained from this study are helpful to detect the dangerous mining workplaces and to protect workers from workplace hazards by considering the safety guidelines.

scholarly journals THE IMPLEMENTATION OF OCCUPATIONAL HEALTH AND SAFETY FOR PREGNANT WORKERS IN VARIOUS WORKPLACES

2021 ◽  
Vol 2 (1) ◽  
pp. 33-41
Author(s):  
Aditira Dwi Hanani
Keyword(s):  
Women Workers ◽  
Occupational Health ◽  
Maternity Leave ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Accidents ◽  
Work Related ◽  
Safety Programs ◽  
Special Protection ◽  
Health And Safety Programs

Pregnant workers have more health risks for health problems than other workers. There are different potential hazards in different workplaces. Occupational Health and Safety Programs need to be implemented for pregnant workers in order to avoid work related diseases in various workplaces. This study aims to determine the the implementation of occupational health and safety for pregnant workers in various workplaces. This study uses a qualitative method by conducting FGD (Focus Group Discussion) with pregnant women workers from various workplaces and in-depth interviews with occupational health and safety experts. Occupational health and safety programs have been implemented for pregnant workers such as the right to maternity leave, working hours arrangements, health insurance, and special protection for pregnant workers. However, there are some workplaces that still do not provide special protection for pregnant workers. Every workplace should pay more attention to the health and safety of pregnant workers as an effort to prevent occupational accidents and work related diseases

Inpatient Data of Occupational Burn Injuries Treated at a Tertiary Burn Center

2019 ◽  
Vol 41 (2) ◽  
pp. 398-401
Author(s):  
Abdulkadir Basaran ◽  
Ozer Ozlu
Keyword(s):  
Hospital Stay ◽  
Burn Injury ◽  
Health And Safety ◽  
Length Of Hospital Stay ◽  
Burn Injuries ◽  
Occupational Accidents ◽  
Cross Sectional ◽  
Work Related ◽  
Burn Center ◽  
Electrical Burns

Abstract Occupational burns are among the important causes of work-related injuries. We aimed to investigate the epidemiology and reasons of occupational burns and thereby to emphasize preventive measures. Between January 2017 and December 2018, the data of major occupational burn injury patients admitted to our burn center were evaluated in this cross-sectional retrospective study. During the study period 342 patients older than 16 years were admitted to the burn center. Among them 80 patients with occupational burns (23.4%) were identified. The mean age of the patients was 34.73 ± 12.3 years. Seventy-eight patients (97.5%) were male. Electrical burns and flame burns were the two leading type of occupational burns. The most common occupation of our patients was construction work. Dangerous behavior, carelessness, lack of protective equipment, and failure to follow instructions were causes of injury. Only 14 patients (17.5%) experienced unavoidable accident. Thirty-seven patients (46.3%) worked on temporary basis. Occupational experience was under 5 years in majority of the cases (62.5%). For the occupational burns the percentage of burned TBSA was 17.08 ± 14.5 (1–60) and the length of hospital stay was 23.94 ± 21.9 days (2–106). There were no significant differences between occupational and nonoccupational burn injuries considering TBSA, total length of hospital stay, and complications (P > .05). Occupational burn injuries are common in less experienced and younger workers. Therefore, recognition of the problem and maintaining awareness is important. In order to prevent occupational accidents and burns, occupational health and safety rules must be obeyed.

scholarly journals Assessment and Quantification of Risks Associated with Small Scale Mining, Khyber Pakhtunkhwa, Pakistan

2020 ◽  
Vol 11 (3) ◽  
pp. 65-69
Author(s):  
Zahid Ur Rehman ◽  
Saira Sherin ◽  
Sajjad Husain ◽  
Noor Muhammad ◽  
Talat Bilal
Keyword(s):  
Coal Mine ◽  
Ventilation System ◽  
Coal Mines ◽  
Health And Safety ◽  
Mining Industry ◽  
Small Scale ◽  
Khyber Pakhtunkhwa ◽  
Data Analyses ◽  
Roof Fall ◽  
One Year

Small scale mining industry is considered more hazardous than other industries worldwide. Large number of workers receive minor and major injuries leading to disabilities or loss of lives due to frequent accidents in mines. Main causes of accidents in mines are fall of roof, improper ventilation system, gases, fires and mine explosions. Beside these hazards, violation of rules and regulations for mine workers are common, which also cause accidents. This paper is focused on issues associated with the health and safety of workers of Cherat Coal Mines (CCM), Abbottabad Coal Mine (ACM) and Abbottabad Soapstone Mine (ASM), Pakistan. The collected data were analyzed with SPSS computer statistics software. The data analyses indicated that the lack of education and violation of safety laws cause accidents in mines. Results show that problems that were rated higher by more than 60% of workers included slide and fall, dust, roof fall and explosive related hazards. In survey more than 50% of the workers admitted the existence of gases, fire and low height mines are common hazards in their workplace. The results also indicated that not only workers but management are also affected by accidents. More than 17% of worker in CCM faced serious accidents up to 3 times during one year. Up to 26% of workers in CCM, 13% in ACM and 15% in ASM suffered accidents for which they had 3 workdays off. It has been concluded that training should be arranged, especially the safety related training on regular basis to reduce the risk of accidents.

scholarly journals Working hours organization impact mechanism upon work-related accidents on microeconomic level

2018 ◽  
Vol 2 (2) ◽  
pp. 32-40
Author(s):  
M. Titopoulou ◽  
E. Titopoulos ◽  
J. Staykova
Keyword(s):  
Health And Safety ◽  
Statistical Processing ◽  
Working Hours ◽  
Well Being ◽  
Health Problems ◽  
Working Time ◽  
Occupational Accidents ◽  
Economic Sectors ◽  
Impact Mechanism ◽  
Work Related

Work organizations rapidly change, triggering the need for a dynamic approach regarding the occupational health and safety and accident prevention. The objective of this research is to examine the influence of the factor 'organisation of the working time' upon the occupational accidents in enterprises as well as to suggest a model of an impact mechanism of working time organization on the occurrence and prevention of accidents/near accidents, using a representative Bulgarian sample. The research is based on a survey conducted in 2016 among 410 employees (52.9% women; 47.1% men) from all economic sectors. Statistical processing and analysis are performed by SPSS/PSPP and statistical modeling by EViews/Gretl. Results show that approximately every fifth employee works longer than the standard weekly occupation of 40 hours; 17.1% of all suffered work-related accident(s); 36.2% work overtime and 41.1% recognize the presence of work-related health problems (most common are total fatigue, back pain, stress and headache). Among those respondents claiming to have work-related health problems, accidents at work occur most frequently when working over 40 h/week. The suggested 3-stage impact mechanism of the working time organization on the occurrence and prevention of occupational accidents allows us to track the chain effects of existing practices in enterprises with regard to working time organization, employees' well-being and the occurrence of work accidents. Prevention strategies should consider changes in scheduling practices, job redesign, and health protection programmes.

scholarly journals Evaluation and Risk Factors of Roadheaders in Coal Mines

2021 ◽  
Vol 29 (3) ◽  
pp. 242-250
Author(s):  
Erika Škvareková ◽  
Marianna Tomašková ◽  
Dušan Sabadka ◽  
Marian Šofranko ◽  
Štefan Zelenák
Keyword(s):  
Slovak Republic ◽  
Coal Mines ◽  
Health And Safety ◽  
Soft Rock ◽  
Occupational Accidents ◽  
Rock Falls ◽  
Work Activity ◽  
Safety Risks ◽  
Hydraulic Machines ◽  
Mining Works

Abstract During mechanical disintegration of the rock, for mining works are used also roadheaders. Roadheaders, in comparison with disintegration by blasting operations can without interuption, and works changes with one machine, dissolve, load and at the same time mine disintegrated rock. These electro-hydraulic machines cause no harmful vibrations and are ideal for mining coal and other soft rock minerals. Mechanical mining is safer, protects the rock environment, allows mining without further breaks, allows you to achieve a higher level of daily progress and also saves work. The analysis of occupational accidents in the Slovak Republic shows that it is necessary require from employees increased attention in any work activity and attention in the work performed (mainly work in handling material, objects and burdens). In the underground coal mines further attention needs to be paid to securing hazardous areas, it is necessary to proceed in such a way as to prevent as much as possible the fall of rock as much as possible Underground roads require modification and equipment in accordance with regulations. It is necessary to follow health and safety instructions mentioned in operating and maintenance documentation. Correction of some deficiencies is ordered by a decision of the Mining Office. Most measures are aimed at adhering to technological discipline, to complement operating documentation, to prevent rock falls, to equip some machinery and transport equipment, to work procedures for handling loads, to maintenance of mining works and for explosion and anti-vapor prevention. In this article, we assess the safety risks of two roadheaders for coal mining works in Slovak conditions. Pairwise comparisons of the criteria of selected roadheaders were used to determine the safety risks, as well as taking into account the risks and safety measures according to the mixed methods following to the standard.

scholarly journals Considerations on Ergonomic Issues in Physiotherapy Activity

2021 ◽  
Vol 343 ◽  
pp. 10004
Author(s):  
Vlad Andrei Darabont ◽  
Doru Costin Darabont
Keyword(s):  
Risk Factors ◽  
Good Practice ◽  
Health And Safety ◽  
Mental Load ◽  
Repetitive Movement ◽  
Motor Disabilities ◽  
Work Related ◽  
Work Related Musculoskeletal Disorders ◽  
High Level ◽  
Technical Measures

Nowadays, the ergonomic issues become more and more important in all economic activity domains. Work-related Musculoskeletal Disorders (MSDs) represent the main problem generated by the poor ergonomic design of the workplaces. The healthcare domain involves high level ergonomic risks related to physical and mental load of the work which could lead to MSDs. The paper presents an analysis of these ergonomic risks for physiotherapy activity and identifies potential measures to improve the health and safety in this domain. The physical load of the physiotherapist’s work is generated by the risk factors such as awkward postures, repetitive movement or working with patients with motor disabilities. The mental load of the physiotherapist’s work depends on risk factors such as working with patients with cognitive impairment and daily or weekly patient flows. The proposed preventive measures are organisational and technical. The organisational measures are based on the requirements of the occupational health and safety (OHS) legislation and on the good practice examples. The technical measures are based on the analysing the documentation of physiotherapy modern equipment. The results of the study can be used to improve the ergonomics and the health and safety of any workplace in physiotherapy activity.

Use of Structured Training for the Handling of Abnormal and Emergency Operating Conditions

1981 ◽  
Vol 25 (1) ◽  
pp. 558-560
Author(s):  
Brett Collins ◽  
Kris Krupp
Keyword(s):  
Skill Acquisition ◽  
Training Programs ◽  
Health And Safety ◽  
Mining Industry ◽  
Safety Training ◽  
Operating Conditions ◽  
Mine Safety ◽  
Operator Training ◽  
Machine Failure ◽  
Element Approach

Training in the mining industry received considerable attention since the Federal Mine Safety and Health Act of 1977 mandating thorough health and safety training. The response to a large extent has been one in which individual facilities developed their own training “programs” rather than sharing in the development of appropriate programs or using another's proven materials. With the basic achievement of health and safety training requirements, the industry has turned its attention to training to improve job performance; here again, independent and relatively informal approaches have been developed. Woodward Associates, Inc., San Diego, has developed, under contract to the U.S. Bureau of Mines, structured equipment operator training programs which teach how to (1) operate the machine and (2) perform the task. The WAI Six-Element approach provides the structure to guide the learning process to (1) ensure exposure to information, (2) promote knowledge and skill acquisition, (3) aid transfer of knowledge and skills to new situations, and (4) assess knowledge and skill acquisition and application. Because of the potential severity of accidents in the mining (and construction) industries, particular attention has been directed to helping future operators to cope with not only normal but also with the abnormal (machine malfunction) and emergency (machine failure) conditions which tend to result in accidents. The Six-Element approach has taken this concern and addressed it through (1) classroom instruction in the cues and procedures for handling abnormal and emergency conditions, and (2) structured on-machine training which employs a truck as task trainer and an OBSAC (On-Board Simulator of Abnormal Conditions) which induces apparent malfunctions, and actual system degrades to allow trainees to experience abnormal and emergency situations under safe conditions and under an instructor's watchful eye. This paper discusses the purpose, benefit, and challenges of introducing and using structured operator training in the mining industry. An evaluation of the experience related to the Haulage Truck Training Program will be discussed. Applications related to training operators of other mobile surface mining machines in normal and abnormal operating conditions will also be discussed.

scholarly journals Evaluation of safety trends in construction, mining and transportation sectors in Turkey

Sigurnost ◽  
2018 ◽  
Vol 60 (1) ◽  
pp. 13-23 ◽  
Author(s):  
Fatih Yilmaz ◽  
Serpil Bardakci Tosun
Keyword(s):  
Health And Safety ◽  
Preventive Services ◽  
Occupational Accidents ◽  
Action Plans ◽  
Fatal Accidents ◽  
Work Related ◽  
Production Processes ◽  
Accession Process ◽  
Very High ◽  
The Eu

SUMMARY: Production processes in construction, mining and transportation involves high risks of occupational accidents all over the world. In 2014, 25.6% of the total accidents and 65% of fatal accidents occured in these three sectors in Turkey. According to the Eurostat data, in 2014, 20% of all work-related accidents and 38% of fatal accidents have occurred in these sectors in EU. The fatality rates in Turkey are very high compared to EU countries. In Turkey, these sectors have high accident risks due to its production processes, use of low-tech, negative conditions and labor-intensive characteristics. Production machines are old, and protective-preventive services are inadequate. Especially in the construction sector, unregistered labor and subcontracting is widespread. Labor inspection is inadequate. In EU accession process, legislative works done in the field of health and safety in Turkey in recent years have not been enough. New regulations were introduced related to protective-preventive services, risk assessment, information and education workers. Nevertheless, occupational accidents has not decreased at the desired level. This paper contains a comperative and statistical analysis of accidents in coal mining, construction and transportation sectors in Turkey and EU. The official statistics data are used in the EU and Turkey. To prevent accidents, action plans must be prepared for each of the three sectors. Practices must be determined and followed strictly within the frame of these action plans.

Evaluating Change in Exposure to Risk for Musculoskeletal Disorders — A Practical Tool

2000 ◽  
Vol 44 (30) ◽  
pp. 5-407-5-408 ◽  
Author(s):  
Guangyan Li ◽  
Peter Buckle
Keyword(s):  
Musculoskeletal Disorders ◽  
Health And Safety ◽  
Field Studies ◽  
Work Related ◽  
Wide Range ◽  
Research Findings ◽  
Practical Tool ◽  
Art Research ◽  
High Level ◽  
Practice Assessment

A tool has been developed for health and safety practitioners to assess the exposure to workplace risks for work-related musculoskeletal disorders. The tool is based on the practitioners' needs and “state of the art” research findings. QEC has been tested, modified and validated using both simulated and real tasks, with the help of approximately 150 practitioners. The studies have shown that the tool has a high level of sensitivity and usability, and exhibits largely acceptable inter/intra-observer reliability. Field studies also indicate that the tool is, in practice, reliable and applicable for a wide range of tasks. With a short training period and some practice, assessment can normally be completed within approximately 10 minutes for each task.

A Practical Method for the Assessment of Work-Related Musculoskeletal Risks - Quick Exposure Check (QEC)

1998 ◽  
Vol 42 (19) ◽  
pp. 1351-1355 ◽  
Author(s):  
Guangyan Li ◽  
Peter Buckle
Keyword(s):  
Health And Safety ◽  
Practical Method ◽  
Field Studies ◽  
Work Related ◽  
Wide Range ◽  
Work Related Musculoskeletal Disorders ◽  
Research Findings ◽  
Art Research ◽  
High Level ◽  
Practice Assessment

A newer exposure tool has been developed for health and safety practitioners to assess the exposure to risks for work-related musculoskeletal disorders. The tool is based on the practitioners' needs for such a tool and “state of the art” research findings. QEC has been tested, modified and validated based upon various simulated and practical tasks, with the help of up to 150 practitioners. The studies have shown that the tool has a high level of sensitivity and usability, and exhibits largely acceptable inter/intra-observer reliability. Field studies also indicate that the tool is, in practice, reliable and applicable for a wide range of tasks. With a short training period and some practice, assessment can normally be completed within 10 minutes for each task.

Sign in / Sign up

Export Citation Format

Share Document