scholarly journals CONRAD-2: Cold Neutron Tomography and Radiography at BER II (V7)

Author(s):  
Nikolay Kardjilov ◽  
André Hilger ◽  
Ingo Manke

V7 has widely been recognized as a versatile and flexible instrument for innovative neutron imaging and has made decisive contributions to the development of new methods by exploiting different contrast mechanisms for imaging. The reason for the success in method development is the flexibility of the facility which permits very fast change of the instrument’s configuration and allows for performing non-standard experiments. The ability for complementary experiments with the laboratory X-ray tomographic scanner (MicroCT Lab) offers the opportunity to study samples at different contrast levels and spatial resolution scales.

2021 ◽  
Vol 7 (11) ◽  
pp. 232
Author(s):  
Kazuhisa Isegawa ◽  
Daigo Setoyama ◽  
Hidehiko Kimura ◽  
Takenao Shinohara

Neutron radiography is regarded as complementary to X-ray radiography in terms of transmittance through materials, but its spatial resolution is still insufficient. In order to achieve higher resolution in neutron imaging, several approaches have been adopted, such as optical magnification and event centroiding. In this paper, the authors focused on modification of the scintillator. A Gd3Al2Ga3O12:Ce single-crystal scintillator was applied to neutron radiography for the first time and a spatial resolution of 10.5 μm was achieved. The results indicate that this material can be a powerful candidate for a new neutron scintillator providing a resolution in micrometer order by optimizing the optical system and increasing the scintillator luminosity.


Author(s):  
Grzegorz Żabiński

The jubilee of Professor Andrzej Nadolski and Professor Marian Głosek is an excellent opportunity for discussing some most recent methods of technological analyses in archaeology and their applications in arms and armour studies. New opportunities are offered by Computed Tomography (CT) and by Neutron Imaging (NI). The latter is insensitive to material density; therefore details that are not detectable by X-ray or CT can be seen in NI images. A considerable progress has also been made in the field of radiocarbon dating. Yet another field are analyses of the chemical composition of smelting slag and slag inclusions in ferrous artefacts. Such analyses can be used for identification of smelting processes, as well as for provenance studies. These take a number of variables into consideration (major and trace elements, as well as isotopic ratios). What seems to be especially promising in provenance studies are isotopes of osmium (Os).


1994 ◽  
Vol 12 (3) ◽  
pp. 539-548 ◽  
Author(s):  
O. Renner ◽  
M. Kopecký ◽  
E. Krouský ◽  
E. Förster ◽  
T. Missalla ◽  
...  

Two novel high-dispersion, high-resolution spectroscopic methods are described. The properties of the vertical dispersion variants of the double-crystal spectrometer and the Johann spectrometer with a cylindrically bent crystal are discussed and compared with those of standard spectroscopic schemes. Preliminary experimental data demonstrate the good luminosity and extreme spectral and 1-D spatial resolution of these methods, which should prove useful in high-precision X-ray spectroscopic measurements of laser-produced plasmas.


2021 ◽  
Vol 9 ◽  
Author(s):  
Lucile Magnier ◽  
Lauréline Lecarme ◽  
Fannie Alloin ◽  
Eric Maire ◽  
Andrew King ◽  
...  

X-ray and neutron imaging are widely employed for battery materials, thanks to the possibility to perform noninvasive in situ and in operando analyses. X-ray tomography can be performed either in synchrotron or in laboratory facilities and is particularly well-suited to analyze bulk materials and electrode/electrolyte interfaces. Several post-lithium-ion (Li-ion) devices, such as Li–sulfur, Li–O2, or all-solid-state Li batteries, have an anode made of metallic Li in common. The main failure mode of Li batteries is the inhomogeneity of the Li electrodeposits onto the Li anode during charge steps, leading to dendrite growth and low Coulombic efficiency. X-ray tomography is a powerful tool for studying dendrites as it provides useful information about their locations, dynamics, and microstructures. So far, the use of neutron tomography is scarcely reported for Li deposit analysis due to the difficulty in reaching sufficient image resolution to capture the deposit microstructure, that is, typically below 10–20 µm. The very different interactions of X-rays and neutrons with Li, which has significantly different opacity in the two cases, make the two techniques highly complementary. Notably, the capacity of neutrons to discern different Li isotopes is pivotal to getting an insight into the composition of Li deposits by distinguishing between Li originating from an electrode (6Li in this study) and Li originating from the Li salt electrolyte (mainly in 7Li here). Indeed, the theoretical linear neutron attenuation coefficient of 6Li is about 15 and 2,000 times larger than that of natural Li and 7Li, respectively. Therefore, a high imaging contrast difference is obtained between 6Li (high attenuation) and natural Li and 7Li (lower attenuations), which could allow a better understanding of the origin of the Li comprising the electrodeposits. In this work, we report, as a proof of concept, an in situ neutron tomography imaging of Li electrodeposits in a cycled Li symmetric cell. The electrochemical cell comprises a natural Li electrode, a 6Li electrode, and a deuterated liquid electrolyte. The neutron tomographies are compared with X-ray tomography images of the same electrochemical cell acquired both at an X-ray synchrotron beamline and at a laboratory X-ray tomograph. Neutron tomography is shown to be compatible with in situ analysis and capable of capturing the overall morphology of the Li deposits in good accordance with X-ray tomography analyses.


2014 ◽  
Vol 88 (4) ◽  
pp. 702-707 ◽  
Author(s):  
Martin Dawson ◽  
Jane Francis ◽  
Rosemary Carpenter

A fossil plant of Eocene age from Antarctica was studied using X-ray and neutron tomography to reveal the three-dimensional plant structures encased within carbonate nodules. The fossil was identified as a branch and leaves of an araucarian conifer, which grew on the volcanic highlands of the Antarctic Peninsula region approximately 50 million yr ago. Both X-ray and neutron imaging techniques successfully exposed the full three-dimensional structure of the fossil without destroying the original specimen, revealing that most of the fossil was present as voids in the concretion and little organic matter was present. However, neutron tomography was found to produce images with superior quality and detail.


2016 ◽  
Vol 49 (1) ◽  
pp. 195-202 ◽  
Author(s):  
Nikolay Kardjilov ◽  
André Hilger ◽  
Ingo Manke ◽  
Robin Woracek ◽  
John Banhart

The construction of the new neutron imaging instrument at the BER-2 research reactor of the Helmholtz-Zentrum Berlin has greatly increased the potential of the facility. The redesign of the facility included improvements of the neutron extraction and transportation systems, more effective shielding, and innovative instrumentation. The cold neutron flux at the neutron guide exit was increased by more than one order of magnitude, which allowed for an implementation of methods that require monochromatic or polarized beams, thus enabling the exploitation of nonconventional contrast mechanisms such as phase, diffraction and magnetic contrasts. The improved instrument design also facilitates the development of high-resolution neutron tomography by providing an increased beam intensity at the sample position.


Author(s):  
R. Hutchings ◽  
I.P. Jones ◽  
M.H. Loretto ◽  
R.E. Smallman

There is increasing interest in X-ray microanalysis of thin specimens and the present paper attempts to define some of the factors which govern the spatial resolution of this type of microanalysis. One of these factors is the spreading of the electron probe as it is transmitted through the specimen. There will always be some beam-spreading with small electron probes, because of the inevitable beam divergence associated with small, high current probes; a lower limit to the spatial resolution is thus 2αst where 2αs is the beam divergence and t the specimen thickness.In addition there will of course be beam spreading caused by elastic and inelastic interaction between the electron beam and the specimen. The angle through which electrons are scattered by the various scattering processes can vary from zero to 180° and it is clearly a very complex calculation to determine the effective size of the beam as it propagates through the specimen.


Author(s):  
J. R. Michael

X-ray microanalysis in the analytical electron microscope (AEM) refers to a technique by which chemical composition can be determined on spatial scales of less than 10 nm. There are many factors that influence the quality of x-ray microanalysis. The minimum probe size with sufficient current for microanalysis that can be generated determines the ultimate spatial resolution of each individual microanalysis. However, it is also necessary to collect efficiently the x-rays generated. Modern high brightness field emission gun equipped AEMs can now generate probes that are less than 1 nm in diameter with high probe currents. Improving the x-ray collection solid angle of the solid state energy dispersive spectrometer (EDS) results in more efficient collection of x-ray generated by the interaction of the electron probe with the specimen, thus reducing the minimum detectability limit. The combination of decreased interaction volume due to smaller electron probe size and the increased collection efficiency due to larger solid angle of x-ray collection should enhance our ability to study interfacial segregation.


Sign in / Sign up

Export Citation Format

Share Document