scholarly journals Tomography Imaging of Lithium Electrodeposits Using Neutron, Synchrotron X-Ray, and Laboratory X-Ray Sources: A Comparison

2021 ◽  
Vol 9 ◽  
Author(s):  
Lucile Magnier ◽  
Lauréline Lecarme ◽  
Fannie Alloin ◽  
Eric Maire ◽  
Andrew King ◽  
...  
Keyword(s):  
Electrochemical Cell ◽  
Neutron Imaging ◽  
Image Resolution ◽  
Neutron Tomography ◽  
X Rays ◽  
X Ray ◽  
Tomography Imaging ◽  
High Attenuation ◽  
Li Batteries

X-ray and neutron imaging are widely employed for battery materials, thanks to the possibility to perform noninvasive in situ and in operando analyses. X-ray tomography can be performed either in synchrotron or in laboratory facilities and is particularly well-suited to analyze bulk materials and electrode/electrolyte interfaces. Several post-lithium-ion (Li-ion) devices, such as Li–sulfur, Li–O2, or all-solid-state Li batteries, have an anode made of metallic Li in common. The main failure mode of Li batteries is the inhomogeneity of the Li electrodeposits onto the Li anode during charge steps, leading to dendrite growth and low Coulombic efficiency. X-ray tomography is a powerful tool for studying dendrites as it provides useful information about their locations, dynamics, and microstructures. So far, the use of neutron tomography is scarcely reported for Li deposit analysis due to the difficulty in reaching sufficient image resolution to capture the deposit microstructure, that is, typically below 10–20 µm. The very different interactions of X-rays and neutrons with Li, which has significantly different opacity in the two cases, make the two techniques highly complementary. Notably, the capacity of neutrons to discern different Li isotopes is pivotal to getting an insight into the composition of Li deposits by distinguishing between Li originating from an electrode (6Li in this study) and Li originating from the Li salt electrolyte (mainly in 7Li here). Indeed, the theoretical linear neutron attenuation coefficient of 6Li is about 15 and 2,000 times larger than that of natural Li and 7Li, respectively. Therefore, a high imaging contrast difference is obtained between 6Li (high attenuation) and natural Li and 7Li (lower attenuations), which could allow a better understanding of the origin of the Li comprising the electrodeposits. In this work, we report, as a proof of concept, an in situ neutron tomography imaging of Li electrodeposits in a cycled Li symmetric cell. The electrochemical cell comprises a natural Li electrode, a 6Li electrode, and a deuterated liquid electrolyte. The neutron tomographies are compared with X-ray tomography images of the same electrochemical cell acquired both at an X-ray synchrotron beamline and at a laboratory X-ray tomograph. Neutron tomography is shown to be compatible with in situ analysis and capable of capturing the overall morphology of the Li deposits in good accordance with X-ray tomography analyses.

scholarly journals Optimization of X-ray Investigations in Dentistry Using Optical Coherence Tomography

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4554
Author(s):  
Ralph-Alexandru Erdelyi ◽  
Virgil-Florin Duma ◽  
Cosmin Sinescu ◽  
George Mihai Dobre ◽  
Adrian Bradu ◽  
...  
Keyword(s):  
Optical Coherence Tomography ◽  
Radiation Dose ◽  
Imaging Techniques ◽  
Image Resolution ◽  
Optical Coherence ◽  
X Rays ◽  
High Quality ◽  
X Ray

The most common imaging technique for dental diagnoses and treatment monitoring is X-ray imaging, which evolved from the first intraoral radiographs to high-quality three-dimensional (3D) Cone Beam Computed Tomography (CBCT). Other imaging techniques have shown potential, such as Optical Coherence Tomography (OCT). We have recently reported on the boundaries of these two types of techniques, regarding. the dental fields where each one is more appropriate or where they should be both used. The aim of the present study is to explore the unique capabilities of the OCT technique to optimize X-ray units imaging (i.e., in terms of image resolution, radiation dose, or contrast). Two types of commercially available and widely used X-ray units are considered. To adjust their parameters, a protocol is developed to employ OCT images of dental conditions that are documented on high (i.e., less than 10 μm) resolution OCT images (both B-scans/cross sections and 3D reconstructions) but are hardly identified on the 200 to 75 μm resolution panoramic or CBCT radiographs. The optimized calibration of the X-ray unit includes choosing appropriate values for the anode voltage and current intensity of the X-ray tube, as well as the patient’s positioning, in order to reach the highest possible X-rays resolution at a radiation dose that is safe for the patient. The optimization protocol is developed in vitro on OCT images of extracted teeth and is further applied in vivo for each type of dental investigation. Optimized radiographic results are compared with un-optimized previously performed radiographs. Also, we show that OCT can permit a rigorous comparison between two (types of) X-ray units. In conclusion, high-quality dental images are possible using low radiation doses if an optimized protocol, developed using OCT, is applied for each type of dental investigation. Also, there are situations when the X-ray technology has drawbacks for dental diagnosis or treatment assessment. In such situations, OCT proves capable to provide qualitative images.

The AMPIX electrochemical cell: a versatile apparatus forin situX-ray scattering and spectroscopic measurements

2012 ◽  
Vol 45 (6) ◽  
pp. 1261-1269 ◽  
Author(s):  
Olaf J. Borkiewicz ◽  
Badri Shyam ◽  
Kamila M. Wiaderek ◽  
Charles Kurtz ◽  
Peter J. Chupas ◽  
...  
Keyword(s):  
Electrochemical Cell ◽  
Function Analysis ◽  
Kinetic Studies ◽  
Spectroscopic Measurements ◽  
Battery Materials ◽  
X Ray ◽  
Complex Processes ◽  
Electrochemical Cycling ◽  
Ray Scattering

This article presents a versatile easy-to-use electrochemical cell suitable forin operando,in situmeasurements of battery materials during electrochemical cycling using a variety of X-ray techniques. Argonne's multi-purposein situX-ray (AMPIX) cell provides reliable electrochemical cycling over extended periods owing to the uniform stack pressure applied by rigid X-ray windows and the formation of a high-fidelity hermetic seal. The suitability of the AMPIX cell for a broad range of synchrotron-based X-ray scattering and spectroscopic measurements has been demonstrated with studies at eight Advanced Photon Source beamlines to date. Compatible techniques include pair distribution function analysis, high-resolution powder diffraction, small-angle scattering and X-ray absorption spectroscopy. These techniques probe a broad range of electronic, structural and morphological features relevant to battery materials. The AMPIX cell enables experiments providing greater insight into the complex processes that occur in operating batteries by allowing the electrochemical reactions to be probed at fine reaction intervals with greater consistency (within the charge–discharge cycle and between different methodologies) with potential for new time-dependent kinetic studies or studies of transient species. Representative X-ray and electrochemical data to demonstrate the functionality of the AMPIX cell are presented.

In Situ Testing and X Rays Radiation Effects of Pt/Bi3.15Nd0.85Ti3O12/Pt Ferroelectric Capacitors

2013 ◽  
Vol 712-715 ◽  
pp. 293-297
Author(s):  
Li Li
Keyword(s):  
Radiation Effects ◽  
Hysteresis Loops ◽  
Electrical Performance ◽  
Hysteresis Curve ◽  
X Rays ◽  
Shanghai Synchrotron Radiation Facility ◽  
X Ray ◽  
In The Beginning ◽  
Ferroelectric Capacitors

Pt/Bi3.15Nd0.85Ti3O12(BNT)/Pt ferroelectric capacitors were monitored using in situ X-ray irradiation with 10 keV at BL14B1 beamline (Shanghai Synchrotron Radiation Facility). BL14B1 combined with a ferroelectric analyzer enabled measurements in situ of electrical performance. The hysteresis curve (PE) of distortion depended on the polarization during irradiation, but the diffracted intensities of the (117) peak did not change in the beginning. ThePEcurve had a negligible change from 2.09×109Gy to 4.45×109Gy. Finally, bothPrandPr+very rapidly increased, but the intensities of (117) decreased. The hysteresis loops were remarkably deformed at the maximum total dose of 4.87×109Gy.

Applications of High-Resolution Powder X-Ray Diffraction

2007 ◽  
Vol 130 ◽  
pp. 7-14 ◽  
Author(s):  
Andrew N. Fitch
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
Powder Diffraction ◽  
X Rays ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Structural Characterisation ◽  
Pdf Analysis

The highly-collimated, intense X-rays produced by a synchrotron radiation source can be harnessed to build high-resolution powder diffraction instruments with a wide variety of applications. The general advantages of using synchrotron radiation for powder diffraction are discussed and illustrated with reference to the structural characterisation of crystalline materials, atomic PDF analysis, in-situ and high-throughput studies where the structure is evolving between successive scans, and the measurement of residual strain in engineering components.

scholarly journals In situ damage assessment using synchrotron X-rays in materials loaded by a Hopkinson bar

2014 ◽  
Vol 372 (2015) ◽  
pp. 20130191 ◽  
Author(s):  
Weinong W. Chen ◽  
Matthew C. Hudspeth ◽  
Ben Claus ◽  
Niranjan D. Parab ◽  
John T. Black ◽  
...  
Keyword(s):  
High Speed ◽  
Particle Interaction ◽  
Tensile Failure ◽  
High Rate ◽  
X Rays ◽  
Contrast Imaging ◽  
X Ray ◽  
Damage Initiation ◽  
Dynamic Experiments

Split Hopkinson or Kolsky bars are common high-rate characterization tools for dynamic mechanical behaviour of materials. Stress–strain responses averaged over specimen volume are obtained as a function of strain rate. Specimen deformation histories can be monitored by high-speed imaging on the surface. It has not been possible to track the damage initiation and evolution during the dynamic deformation inside specimens except for a few transparent materials. In this study, we integrated Hopkinson compression/tension bars with high-speed X-ray imaging capabilities. The damage history in a dynamically deforming specimen was monitored in situ using synchrotron radiation via X-ray phase contrast imaging. The effectiveness of the novel union between these two powerful techniques, which opens a new angle for data acquisition in dynamic experiments, is demonstrated by a series of dynamic experiments on a variety of material systems, including particle interaction in granular materials, glass impact cracking, single crystal silicon tensile failure and ligament–bone junction damage.

scholarly journals The Effect of Image Resolution on Automated Classification of Chest X-rays

2021 ◽  
Author(s):  
Md Inzamam Ul Haque ◽  
Abhishek K Dubey ◽  
Jacob D Hinkle
Keyword(s):  
High Resolution ◽  
Automated Analysis ◽  
Image Resolution ◽  
Free Text ◽  
X Rays ◽  
Training Time ◽  
X Ray ◽  
Radiology Reports ◽  
Chest X Ray ◽  
High Resolution Images

Deep learning models have received much attention lately for their ability to achieve expert-level performance on the accurate automated analysis of chest X-rays. Although publicly available chest X-ray datasets include high resolution images, most models are trained on reduced size images due to limitations on GPU memory and training time. As compute capability continues to advance, it will become feasible to train large convolutional neural networks on high-resolution images. This study is based on the publicly available MIMIC-CXR-JPG dataset, comprising 377,110 high resolution chest X-ray images, and provided with 14 labels to the corresponding free-text radiology reports. We find, interestingly, that tasks that require a large receptive field are better suited to downscaled input images, and we verify this qualitatively by inspecting effective receptive fields and class activation maps of trained models. Finally, we show that stacking an ensemble across resolutions outperforms each individual learner at all input resolutions while providing interpretable scale weights, suggesting that multi-scale features are crucially important to information extraction from high-resolution chest X-rays.

scholarly journals Real-time synthesis and detection of plasmonic metal (Au, Ag) nanoparticles under monochromatic X-ray nano-tomography

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Amardeep Bharti ◽  
Keun Hwa Chae ◽  
Navdeep Goyal
Keyword(s):  
Particle Size ◽  
Real Time ◽  
Reduction Process ◽  
Localized Surface Plasmon ◽  
Plasmonic Nanostructures ◽  
X Rays ◽  
X Ray ◽  
The Real ◽  
Size And Shape

AbstractPlasmonic nanostructures are of immense interest of research due to its widespread applications in microelectronics, photonics, and biotechnology, because of its size and shape-dependent localized surface plasmon resonance response. The great efforts have been constructed by physicists, chemists, and material scientists to deliver optimized reaction protocol to tailor the size and shape of nanostructures. Real-time characterization emerges out as a versatile tool in perspective to the optimization of synthesis parameters. Moreover, in the past decades, radiation-induced reduction of metallic-salt to nanoparticles dominates over the conventional direct chemical reduction process which overcomes the production of secondary products and yields ultra-high quality and pure nanostructures. Here we show, the real-time/in-situ synthesis and detection of plasmonic (Au andAg) nanoparticles using single synchrotron monochromatic 6.7 keV X-rays based Nano-Tomography beamline. The real-time X-ray nano-tomography of plasmonic nanostructures has been first-time successfully achieved at such a low-energy that would be leading to the possibility of these experiments at laboratory-based sources. In-situ optical imaging confirms the radiolysis of water molecule resulting in the production of $$e_{aq}^-,\,OH^\bullet ,$$ e aq - , O H ∙ , and $$O_2^-$$ O 2 - under X-ray irradiation. The obtained particle-size and size-distribution by X-ray tomography are in good agreement to TEM results. The effect of different chemical environment media on the particle-size has also been studied. This work provides the protocol to precisely control the size of nanostructures and to synthesize the ultrahigh-purity grade monodisperse nanoparticles that would definitely enhance the phase-contrast in cancer bio-imaging and plasmonic photovoltaic application.

X-RAY DIFFRACTION FOR SURFACES AND BURIED INTERFACES

2000 ◽  
Vol 07 (04) ◽  
pp. 437-446 ◽  
Author(s):  
G. RENAUD
Keyword(s):  
Grazing Incidence ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grain Sizes ◽  
Buried Interfaces ◽  
Surfaces And Interfaces ◽  
Coherent Interfaces

The application of X-rays to the structural characterization of surfaces and interfaces, in situ and in UHV, is discussed on selected examples. Grazing incidence X-ray diffraction is not only a very powerful technique for quantitatively investigating the atomic structure of surfaces and interfaces, but is also very useful for providing information on the interfacial registry for coherent interfaces or on the strain deformation, island and grain sizes for incoherent epilayers.

scholarly journals In Situ X-Ray Tomography Imaging of Soil Water and Cyanobacteria From Biological Soil Crusts Undergoing Desiccation

2018 ◽  
Vol 6 ◽  
Author(s):  
Estelle Couradeau ◽  
Vincent J. M. N. L. Felde ◽  
Dilworth Parkinson ◽  
Daniel Uteau ◽  
Alexis Rochet ◽  
...  
Keyword(s):  
Soil Water ◽  
Biological Soil Crusts ◽  
X Ray ◽  
Tomography Imaging ◽  
Soil Crusts

In situ time-resolved X-ray diffraction of tobermorite formation process under hydrothermal condition: Influence of reactive al compound

2011 ◽  
Vol 26 (2) ◽  
pp. 134-137 ◽  
Author(s):  
K. Matsui ◽  
A. Ogawa ◽  
J. Kikuma ◽  
M. Tsunashima ◽  
T. Ishikawa ◽  
...  
Keyword(s):  
Hydrothermal Reaction ◽  
High Energy ◽  
Saturated Steam ◽  
Array Detector ◽  
Time Interval ◽  
X Rays ◽  
X Ray Diffraction ◽  
Formation Reaction ◽  
X Ray

Hydrothermal formation reaction of tobermorite in the autoclaved aerated concrete (AAC) process has been investigated by in situ X-ray diffraction. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used. XRD measurements were conducted in a temperature range 100–190°C throughout 12 h of reaction time with a time interval of 4.25 min under a saturated steam pressure. To clarify the tobermorite formation mechanism in the AAC process, the effect of Al addition on the tobermorite formation reaction was studied. As intermediate phases, non-crystalline calcium silicate hydrate (C-S-H), hydroxylellestadite (HE), and katoite (KA) were clearly observed. Consequently, it was confirmed that there were two reaction pathways via C-S-H and KA in the tobermorite formation reaction of Al containing system. In addition, detailed information on the structural changes during the hydrothermal reaction was obtained.

Sign in / Sign up

Export Citation Format

Share Document