scholarly journals Combined Effect of Marble Waste as Powder and Aggregate Form on the Proprieties of the Mortar

2021 ◽  
Vol 45 (6) ◽  
pp. 467-476
Author(s):  
Mekki Maza ◽  
Nadia Tebbal ◽  
Salim Zitouni ◽  
Zine El Abidine Rahmouni
Keyword(s):  
Building Materials ◽  
Sand Dunes ◽  
Cement Matrix ◽  
Addition Rate ◽  
Marble Powder ◽  
Natural Dune ◽  
Materials Used ◽  
Small Parts ◽  
Marble Waste

Recycling and recovery of waste are now considered as a solution for the future to protect the environment. The marble processing workshops on the other hand, generate a large amount of waste in the form of powder and small parts. Due to these facts, the aim of this study is to valorize marble waste in the form of powder and crushed aggregates (sand) as additions in cementitious matrix building materials. The characterization of the materials used to formulate mortars based on natural dune sand with marble powder and mortars based on mixed sand (dunes sand and crushed sand) and marble powder was measure. In this sense, several series have been studied, varying the addition rate of the marble powder in order to reduce the porosity of the cement matrix, using crushed marble sand to increase the granular cohesion and using of a reducing water admixture (MEDAPLAST SP40) for more performance mortars. Very appreciable results were observed for a dosage of 15% of marble powder and for the combination of 15% of marble powder with 20% of crushed marble sand. This research recommends recycling 35% of marble waste in the cement matrix that contribute effectively to the preservation of the environment.

scholarly journals INDOOR MICROCLIMATIC VARIABLES ASSESSMENT BY VIBRATIONAL SPECTROSCOPY ON ORIGINAL STRUCTURE OF TROPAEUM TRAIANI MONUMENT, ADAMCLISI

2020 ◽  
Vol 20 (4) ◽  
pp. 977-994
Author(s):  
RADU LUCIAN OLTEANU ◽  
CRISTIANA RADULESCU ◽  
CLAUDIA STIHI ◽  
IOANA DANIELA DULAMA ◽  
CRISTINA MIHAELA NICOLESCU ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Vibrational Spectroscopy ◽  
Building Materials ◽  
Atmospheric Pollutants ◽  
Original Structure ◽  
Amorphous Calcium Carbonate ◽  
Major Scale ◽  
Materials Used ◽  
Structural Aspects

This work attempts to show the usefulness of vibrational spectroscopy (i.e., FTIR and Raman) in the analysis of major components of the original structure materials of a heritage monument (Tropaeum Traiani, Adamclisi). The features of materials and indoor microclimatic variables (i.e., temperature and relative humidity), on the periods of the monitoring campaigns, were considered. As the conservation must make sure about the physicochemical and structural aspects of the materials, assessment of the environmental impact, deterioration processes and characterization of ancient building materials are useful to understand the chemical evolution in the past, predict the various trends in the future, choose the suitable restoration methods to preserve their present state, and even to describe the alteration process of materials and modification through time. The surface of original structure materials used until present seems not to be affected at major scale by the indoor microclimate variables. But even high recorded relative humidity levels promote the occurrence of amorphous calcium carbonate, calcite, aragonite and vaterite highlighted by vibrational spectroscopy data (i.e., FTIR and Raman), as a first effect, the development of biological organism can be enhanced, depending on the characteristics of the substrate. Second, atmospheric pollutants can be dissolved easier in the humidity existing in the porous material, and lastly, if the waterflow inside the stone is not homogeneous, cracks could appear due to differences in permeability.

scholarly journals Mortars from the Palace of Knossos in Crete, Greece: A Multi-Analytical Approach

Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 30
Author(s):  
Fernanda Carvalho ◽  
Pedro Sousa ◽  
Nuno Leal ◽  
Joaquim Simão ◽  
Elissavet Kavoulaki ◽  
...  
Keyword(s):  
Analytical Approach ◽  
Building Materials ◽  
Archaeological Site ◽  
Relevant Information ◽  
Morphological Characterization ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
Lime Mortars ◽  
Materials Used

The study of building materials constituting cultural heritage is fundamental to understand their characteristics and predict their behavior. When considering materials from archaeological sites, their characterization can provide not only relevant information for a broader understanding of the site and its importance and significance but can also increase knowledge about ancient materials and their performance. The Palace of Knossos is a very important archaeological site in the European history context, and its preservation benefits from the characterization of the constituent materials. Samples of mortars from this monument were collected under the scope of the H2020 HERACLES project, where a multi-analytical approach was chosen using established protocols for the different sample typologies. Instrumental techniques such as optical microscopy (OM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and simultaneous thermogravimetry and differential thermal analysis (TG–DTA) were used for the chemical, mineralogical, and morphological characterization of these mortar samples. The results indicate that the majority are lime mortars, both aerial and hydraulic, but gypsum-based mortars were also identified. Differences in the chemical composition of the samples in distinct areas of the monument allowed us to reflect on the variety of materials used in the construction of the Palace of Knossos.

TRADITIONAL OUTBUILDINGS OF THE MORDOVIANS

2019 ◽  
Vol 15 (2) ◽  
pp. 154-165 ◽  
Author(s):  
Elena N. Mokshina ◽  
Mihail I. Svyatkin
Keyword(s):  
Ethnic Group ◽  
Economic Activity ◽  
Building Materials ◽  
Animal Feed ◽  
Economic Activities ◽  
Important Place ◽  
Main Building ◽  
Genetic Problem ◽  
Materials Used ◽  
Functional Purpose

Introduction. The article deals with the main traditional outbuildings of the Mordvinians, reported on their functional purpose in economic activity. The forms and types of outbuildings, as well as the main building materials used by Mordvinians are described in details. Their significance in the religious and ceremonial life of the ethnic group is shown. Materials and Methods. The research is based on traditional methods of ethnographic science, such as field observation, survey and interviews, and a comprehensive approach. Among the methods of historical science comparative-historical, historical-genetic, problem-chronological, structural-system were used. Among the general scientific methods of research logical, descriptive, narrative, generalization, classification and systematization were involved. To achieve the results of the study, the materials collected by the authors in the course of field surveys conducted in the Mordovian villages were mainly used. Results and Discussion. Traditional outbuildings were of great importance in the economic activity of the Mordovian ethnic group. According to their functional purpose, they can be divided into the following groups: for livestock and poultry (stable, chicken coop, stable, kalda), sanitary and hygienic (bath), warehouse buildings for storage of food, utensils, firewood, animal feed (barn, cellar, woodshed, hayloft), for processing of grain (sheep, riga, mill). Depending on the welfare and financial capacity of the family, the number of outbuildings was different. As a rule, the wealthier families had more outbuildings than the less wealthier ones. The main building material for the construction of these buildings was wood. Conclusion. Thus, the traditional outbuildings of the Mordvinians occupied an important place in its economic activities. At the same time, each of them had its own purpose and performed certain functions. Some buildings, such as a bath and a barn, had not only economic purpose, but also were the venue for a number of prayers and ceremonies. It is now ordinarily they have banya (bath-house), outdoor courtyard with standing in different places sheds, barn and cellar.

Emerging Techniques for the Characterization of Nano-Mechanical Properties of Integrated Circuit Components

2008 ◽  
Author(s):  
Nicholas Randall ◽  
Rahul Premachandran Nair
Keyword(s):  
Mechanical Properties ◽  
Quality Control ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Manufacturing Process ◽  
Solder Bumps ◽  
Initial Work ◽  
Circuit Components ◽  
Materials Used

Abstract With the growing complexity of integrated circuits (IC) comes the issue of quality control during the manufacturing process. In order to avoid late realization of design flaws which could be very expensive, the characterization of the mechanical properties of the IC components needs to be carried out in a more efficient and standardized manner. The effects of changes in the manufacturing process and materials used on the functioning and reliability of the final device also need to be addressed. Initial work on accurately determining several key mechanical properties of bonding pads, solder bumps and coatings using a combination of different methods and equipment has been summarized.

Sign in / Sign up

Export Citation Format

Share Document