scholarly journals The Application of Semi Variogram and Ordinary Kriging in Determining the Cohesion and Clay Percentage Distribution in Hilly Area of Sabah, Malaysia

2021 ◽  
Vol 16 (5) ◽  
pp. 525-530
Author(s):  
Mohammad Radzif Taharin ◽  
Rodeano Roslee
Keyword(s):  
Ordinary Kriging ◽  
Mean Squared Error ◽  
Performance Indicator ◽  
Geological Mapping ◽  
Geographical Information ◽  
Geostatistical Methods ◽  
Digital Mapping ◽  
Squared Error ◽  
Variogram Models ◽  
Clay Percentage

Ordinary Kriging (OK) is one of the geostatistical methods, which were used in the variation types of mapping, which related to the soil. Compliment by semi variogram models, OK has become one of the most sought out method for the digital mapping, which applied Geographical Information System (GIS) as a main approach. Four semi variogram models, which are spherical, exponential, circular and gaussian would be applied to determine the best model for the mapping purposes, with Root-Mean-Squared-Error (RMSE) as a performance indicator. The value of the cohesion and clay percentage will be based according to the related depth. Each semi variogram model will be applied to determine the best model for each depth, whether it is cohesion or clay percentage, and producing a map, as a result. This mapping would be an alternative to the geological mapping, whereby it would show the range of the cohesion and clay percentage values rather than soil types.

Use of reflectance spectroscopy to estimate the organic carbon and CaCO3 contents of soils

2012 ◽  
Vol 61 (2) ◽  
pp. 277-290 ◽  
Author(s):  
Ádám Csorba ◽  
Vince Láng ◽  
László Fenyvesi ◽  
Erika Michéli
Keyword(s):  
Organic Carbon ◽  
Least Squares ◽  
Partial Least Squares ◽  
Partial Least Squares Regression ◽  
Mean Squared Error ◽  
Reflectance Spectroscopy ◽  
Least Squares Regression ◽  
Root Mean Squared Error ◽  
Squared Error

Napjainkban egyre nagyobb igény mutatkozik olyan technológiák és módszerek kidolgozására és alkalmazására, melyek lehetővé teszik a gyors, költséghatékony és környezetbarát talajadat-felvételezést és kiértékelést. Ezeknek az igényeknek felel meg a reflektancia spektroszkópia, mely az elektromágneses spektrum látható (VIS) és közeli infravörös (NIR) tartományában (350–2500 nm) végzett reflektancia-mérésekre épül. Figyelembe véve, hogy a talajokról felvett reflektancia spektrum információban nagyon gazdag, és a vizsgált tartományban számos talajalkotó rendelkezik karakterisztikus spektrális „ujjlenyomattal”, egyetlen görbéből lehetővé válik nagyszámú, kulcsfontosságú talajparaméter egyidejű meghatározása. Dolgozatunkban, a reflektancia spektroszkópia alapjaira helyezett, a talajok ösz-szetételének meghatározását célzó módszertani fejlesztés első lépéseit mutatjuk be. Munkánk során talajok szervesszén- és CaCO3-tartalmának megbecslését lehetővé tévő többváltozós matematikai-statisztikai módszerekre (részleges legkisebb négyzetek módszere, partial least squares regression – PLSR) épülő prediktív modellek létrehozását és tesztelését végeztük el. A létrehozott modellek tesztelése során megállapítottuk, hogy az eljárás mindkét talajparaméter esetében magas R2értéket [R2(szerves szén) = 0,815; R2(CaCO3) = 0,907] adott. A becslés pontosságát jelző közepes négyzetes eltérés (root mean squared error – RMSE) érték mindkét paraméter esetében közepesnek mondható [RMSE (szerves szén) = 0,467; RMSE (CaCO3) = 3,508], mely a reflektancia mérési előírások standardizálásával jelentősen javítható. Vizsgálataink alapján arra a következtetésre jutottunk, hogy a reflektancia spektroszkópia és a többváltozós kemometriai eljárások együttes alkalmazásával, gyors és költséghatékony adatfelvételezési és -értékelési módszerhez juthatunk.

Using Approximation Non-Bayesian Computation with Fuzzy Data to Estimation Inverse Weibull Parameters and Reliability Function

2018 ◽  
pp. 397
Author(s):  
Nadia Hashim Al-Noor ◽  
Shurooq A.K. Al-Sultany
Keyword(s):  
Maximum Likelihood ◽  
Expectation Maximization ◽  
Mean Squared Error ◽  
Maximum Likelihood Estimators ◽  
Reliability Function ◽  
Fuzzy Data ◽  
Monte Carlo Simulation Study ◽  
Weibull Parameters ◽  
Squared Error ◽  
Newton Raphson

        In real situations all observations and measurements are not exact numbers but more or less non-exact, also called fuzzy. So, in this paper, we use approximate non-Bayesian computational methods to estimate inverse Weibull parameters and reliability function with fuzzy data. The maximum likelihood and moment estimations are obtained as non-Bayesian estimation. The maximum likelihood estimators have been derived numerically based on two iterative techniques namely “Newton-Raphson” and the “Expectation-Maximization” techniques. In addition, we provide compared numerically through Monte-Carlo simulation study to obtained estimates of the parameters and reliability function in terms of their mean squared error values and integrated mean squared error values respectively.

Image Quality Enhancing by Efficient Histogram Equalization

2014 ◽  
Vol 2 (2) ◽  
pp. 47-58
Author(s):  
Ismail Sh. Baqer
Keyword(s):  
Image Quality ◽  
Contrast Enhancement ◽  
Mean Squared Error ◽  
Signal To Noise Ratio ◽  
Histogram Equalization ◽  
Gray Level ◽  
Signal To Noise ◽  
Squared Error ◽  
Noise Ratio

A two Level Image Quality enhancement is proposed in this paper. In the first level, Dualistic Sub-Image Histogram Equalization DSIHE method decomposes the original image into two sub-images based on median of original images. The second level deals with spikes shaped noise that may appear in the image after processing. We presents three methods of image enhancement GHE, LHE and proposed DSIHE that improve the visual quality of images. A comparative calculations is being carried out on above mentioned techniques to examine objective and subjective image quality parameters e.g. Peak Signal-to-Noise Ratio PSNR values, entropy H and mean squared error MSE to measure the quality of gray scale enhanced images. For handling gray-level images, convenient Histogram Equalization methods e.g. GHE and LHE tend to change the mean brightness of an image to middle level of the gray-level range limiting their appropriateness for contrast enhancement in consumer electronics such as TV monitors. The DSIHE methods seem to overcome this disadvantage as they tend to preserve both, the brightness and contrast enhancement. Experimental results show that the proposed technique gives better results in terms of Discrete Entropy, Signal to Noise ratio and Mean Squared Error values than the Global and Local histogram-based equalization methods

scholarly journals Thematic Maps for the Variation of Bearing Capacity of Soil Using SPTs and MATLAB

Geosciences ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 329
Author(s):  
Mahdi O. Karkush ◽  
Mahmood D. Ahmed ◽  
Ammar Abdul-Hassan Sheikha ◽  
Ayad Al-Rumaithi
Keyword(s):  
Bearing Capacity ◽  
Mean Squared Error ◽  
Ground Level ◽  
The Other ◽  
Thematic Maps ◽  
First Order ◽  
Squared Error ◽  
Order Polynomial ◽  
Interpolation Polynomials ◽  
Penetration Tests

The current study involves placing 135 boreholes drilled to a depth of 10 m below the existing ground level. Three standard penetration tests (SPT) are performed at depths of 1.5, 6, and 9.5 m for each borehole. To produce thematic maps with coordinates and depths for the bearing capacity variation of the soil, a numerical analysis was conducted using MATLAB software. Despite several-order interpolation polynomials being used to estimate the bearing capacity of soil, the first-order polynomial was the best among the other trials due to its simplicity and fast calculations. Additionally, the root mean squared error (RMSE) was almost the same for the all of the tried models. The results of the study can be summarized by the production of thematic maps showing the variation of the bearing capacity of the soil over the whole area of Al-Basrah city correlated with several depths. The bearing capacity of soil obtained from the suggested first-order polynomial matches well with those calculated from the results of SPTs with a deviation of ±30% at a 95% confidence interval.

scholarly journals Industrial Control under Non-Ideal Measurements: Data-Based Signal Processing as an Alternative to Controller Retuning

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1237
Author(s):  
Ivan Pisa ◽  
Antoni Morell ◽  
Ramón Vilanova ◽  
Jose Lopez Vicario
Keyword(s):  
Mean Squared Error ◽  
Control Strategies ◽  
Treatment Plant ◽  
Industrial Control ◽  
Output Data ◽  
Complex Processes ◽  
Squared Error ◽  
Complex Design ◽  
Solution Design ◽  
Delay Correction

Industrial environments are characterised by the non-lineal and highly complex processes they perform. Different control strategies are considered to assure that these processes are correctly performed. Nevertheless, these strategies are sensible to noise-corrupted and delayed measurements. For that reason, denoising techniques and delay correction methodologies should be considered but, most of these techniques require a complex design and optimisation process as a function of the scenario where they are applied. To alleviate this, a complete data-based approach devoted to denoising and correcting the delay of measurements is proposed here with a two-fold objective: simplify the solution design process and achieve its decoupling from the considered control strategy as well as from the scenario. Here it corresponds to a Wastewater Treatment Plant (WWTP). However, the proposed solution can be adopted at any industrial environment since neither an optimization nor a design focused on the scenario is required, only pairs of input and output data. Results show that a minimum Root Mean Squared Error (RMSE) improvement of a 63.87% is achieved when the new proposed data-based denoising approach is considered. In addition, the whole system performance show that similar and even better results are obtained when compared to scenario-optimised methodologies.

scholarly journals A Novel Computational Intelligence Approach for Coal Consumption Forecasting in Iran

2021 ◽  
Vol 13 (14) ◽  
pp. 7612
Author(s):  
Mahdis sadat Jalaee ◽  
Alireza Shakibaei ◽  
Amin GhasemiNejad ◽  
Sayyed Abdolmajid Jalaee ◽  
Reza Derakhshani
Keyword(s):  
Hybrid Method ◽  
Computational Intelligence ◽  
Energy Demand ◽  
Mean Squared Error ◽  
Absolute Error ◽  
Coal Consumption ◽  
Squared Error ◽  
Artificial Neural ◽  
Socio Economic Variables ◽  
Intelligence Approach

Coal as a fossil and non-renewable fuel is one of the most valuable energy minerals in the world with the largest volume reserves. Artificial neural networks (ANN), despite being one of the highest breakthroughs in the field of computational intelligence, has some significant disadvantages, such as slow training, susceptibility to falling into a local optimal points, sensitivity of initial weights, and bias. To overcome these shortcomings, this study presents an improved ANN structure, that is optimized by a proposed hybrid method. The aim of this study is to propose a novel hybrid method for predicting coal consumption in Iran based on socio-economic variables using the bat and grey wolf optimization algorithm with an artificial neural network (BGWAN). For this purpose, data from 1981 to 2019 have been used for modelling and testing the method. The available data are partly used to find the optimal or near-optimal values of the weighting parameters (1980–2014) and partly to test the model (2015–2019). The performance of the BGWAN is evaluated by mean squared error (MSE), mean absolute error (MAE), root mean squared error (RMSE), standard deviation error (STD), and correlation coefficient (R^2) between the output of the method and the actual dataset. The result of this study showed that BGWAN performance was excellent and proved its efficiency as a useful and reliable tool for monitoring coal consumption or energy demand in Iran.

scholarly journals Complete subset averaging with many instruments

2020 ◽  
Author(s):  
Seojeong Lee ◽  
Youngki Shin
Keyword(s):  
Demand Function ◽  
Simulation Experiment ◽  
Mean Squared Error ◽  
Asymptotic Optimality ◽  
Weighted Average ◽  
Subset Size ◽  
Extensive Simulation ◽  
Squared Error ◽  
Many Instruments ◽  
Class Of Estimators

Summary We propose a two-stage least squares (2SLS) estimator whose first stage is the equal-weighted average over a complete subset with k instruments among K available, which we call the complete subset averaging (CSA) 2SLS. The approximate mean squared error (MSE) is derived as a function of the subset size k by the Nagar (1959) expansion. The subset size is chosen by minimising the sample counterpart of the approximate MSE. We show that this method achieves asymptotic optimality among the class of estimators with different subset sizes. To deal with averaging over a growing set of irrelevant instruments, we generalise the approximate MSE to find that the optimal k is larger than otherwise. An extensive simulation experiment shows that the CSA-2SLS estimator outperforms the alternative estimators when instruments are correlated. As an empirical illustration, we estimate the logistic demand function in Berry et al. (1995) and find that the CSA-2SLS estimate is better supported by economic theory than are the alternative estimates.

scholarly journals Estimating Physical Activity Energy Expenditure Using an Ensemble Model-Based Patch-Type Sensor Module

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 861
Author(s):  
Kyeung Ho Kang ◽  
Mingu Kang ◽  
Siho Shin ◽  
Jaehyo Jung ◽  
Meina Li
Keyword(s):  
Physical Activity ◽  
Energy Expenditure ◽  
Mean Squared Error ◽  
Absolute Error ◽  
Ensemble Model ◽  
Direct Calorimetry ◽  
Patch Type ◽  
Mortality And Morbidity ◽  
Squared Error ◽  
Sensor Module

Chronic diseases, such as coronary artery disease and diabetes, are caused by inadequate physical activity and are the leading cause of increasing mortality and morbidity rates. Direct calorimetry by calorie production and indirect calorimetry by energy expenditure (EE) has been regarded as the best method for estimating the physical activity and EE. However, this method is inconvenient, owing to the use of an oxygen respiration measurement mask. In this study, we propose a model that estimates physical activity EE using an ensemble model that combines artificial neural networks and genetic algorithms using the data acquired from patch-type sensors. The proposed ensemble model achieved an accuracy of more than 92% (Root Mean Squared Error (RMSE) = 0.1893, R2 = 0.91, Mean Squared Error (MSE) = 0.014213, Mean Absolute Error (MAE) = 0.14020) by testing various structures through repeated experiments.

scholarly journals Development and Evaluation of Geostatistical Methods for Estimating Weather Related Collisions: A Large-Scale Case Study

2021 ◽  
pp. 036119812110200
Author(s):  
Andy H. Wong ◽  
Tae J. Kwon
Keyword(s):  
Large Scale ◽  
Mean Squared Error ◽  
Hot Spot ◽  
High Ratio ◽  
Contributing Factors ◽  
Geostatistical Methods ◽  
Road Users ◽  
Statistical Measures ◽  
Weather Events

Winter driving conditions pose a real hazard to road users with increased chance of collisions during inclement weather events. As such, road authorities strive to service the hazardous roads or collision hot spots by increasing road safety, mobility, and accessibility. One measure of a hot spot would be winter collision statistics. Using the ratio of winter collisions (WC) to all collisions, roads that show a high ratio of WC should be given a high priority for further diagnosis and countermeasure selection. This study presents a unique methodological framework that is built on one of the least explored yet most powerful geostatistical techniques, namely, regression kriging (RK). Unlike other variants of kriging, RK uses auxiliary variables to gain a deeper understanding of contributing factors while also utilizing the spatial autocorrelation structure for predicting WC ratios. The applicability and validity of RK for a large-scale hot spot analysis is evaluated using the northeast quarter of the State of Iowa, spanning five winter seasons from 2013/14 to 2017/18. The findings of the case study assessed via three different statistical measures (mean squared error, root mean square error, and root mean squared standardized error) suggest that RK is very effective for modeling WC ratios, thereby further supporting its robustness and feasibility for a statewide implementation.

Sign in / Sign up

Export Citation Format

Share Document