Influence of Waste Cork with Thinner on the Rheological Properties of Asphalt

Over the last two decades, the rapid and continued deterioration of the transportation network has been regarded as a major issue. There are many measures that can be taken to reduce this deterioration and improve road specifications, including improving road design, using higher quality materials, and using more efficient construction methods. This study is concerned with three principles: including investigating the impact of using waste paste on the rheological properties of bitumen; the environmental pollution that is a global problem; and the economic benefits as a result of the reusing of waste materials such as corks to produce new reusable materials like Modified-Asphalt. In this research, cork has been melted by thinner and mixed with asphalt to get a good paste with weight percentages of 1%, 3%, 5%, and 7%. After conducting the necessary tests on the samples, it was found that the addition of waste paste to virgin bitumen has softened the bitumen by decreasing the hardness and adhesiveness of the bitumen by increasing penetration with increasing cork paste content. The findings show that the current procedure can be used in cold regions because it requires less hard asphalt than that used in hot regions. It can also be used with natural asphalt, like natural rock asphalt, in various percent to give asphalt with suitable properties for use in roofing and paving roads.

Optimization of the Nonlinear Muskingum Model Parameters for the River Routing, Tigris River a Case Study

Flood forecasting and management are one of the most important strategies necessary for water resource and decision planners in combating flood problems. The Muskingum model is one of the most popular and widely used applications for the purpose of predicting flood routing. The particle swarm optimization (PSO) methodology was used to estimate the coefficients of the nonlinear Muskingum model in this study, comparing the results with the methods of genetic algorithm (GA), harmony search (HS), least-squares method (LSM), and Hook-Jeeves (HJ). The average monthly inflow for the Tigris River upstream at the Al-Mosul dam was selected as a case study for estimating the Muskingum model's parameters. The analytical and statistical results showed that the PSO method is the best application and corresponds to the results of the Muskingum model, followed by the genetic algorithm method, according to the following general descending sequence: PSO, GA, LSM, HJ, HS. The PSO method is characterized by its accurate results and does not require many assumptions and conditions for its application, which facilitates its use a lot in the subject of hydrology. Therefore, it is better to recommend further research in the use of this method in the implementation of future studies and applications.

Adjustable Internal Shading for Home Office Daylighting in Tropical Climates

Home-based workspaces have considerably increased all over the world. Besides, the recent outbreak of the COVID-19 disease forced many people to work from their homes. However, existing residential apartment buildings (ERABs) had been designed for accommodation but not for office works. Low-quality visual environments in ERABs, which have no shading controls on their windows, are evident in tropical climates with extremely high solar radiation. Thus, interior retrofit is significant to provide visual comfort for users in ERABs with low flexibility for modification of their facades. Different interior design variables were simulated by the Radiance-based program to analyse daylighting in a closed-plan room. Before the simulation experiments, field measurement of daylight was performed under a tropical sky to validate the results, and the findings revealed significant Pearson correlations. This paper showed that ERABs are confronting extremely high indoor daylight quantity, up to 10,228 lx, and low quality with intolerable glare. An adjustable model of internal shading, including an integrated Venetian blind with a horizontal light shelf and the window films, was proposed to improve quantitative and qualitative performances of daylighting in tropical regions. This dynamic model could be adjusted to various positions based on daylighting conditions in the buildings. By comparing the simulation results of this model with the base model, indoor illuminance levels could successfully reduce from 32% to 86%; Illuminance Uniformity Ratio (IUR) and Target Daylight Illuminance (TDI) significantly improved up to 180% and 300%, respectively; Daylight Glare Probability (DGP) and CIE Glare Index (CGI) changed from intolerable to imperceptible status. Accordingly, the proposed model can considerably improve daylight quantity and quality in the test room during different times. This study concludes that the dynamic model of internal shadings could provide efficient daylighting, by decreasing the extremely high indoor illuminance and glare in the ERABs in tropical climates.

Environmental Influences on the Settlements Patterns of Communities in the Marshes of Iraq

In the field of residential community planning, one of the appropriate places to study the mutual influences between man and the environment, away from the influences, concepts and mechanisms of contemporary planning theories are isolated environments in rural areas, and the marshlands in Iraq represent one of these models. These areas still retain the planning patterns of residential communities for thousands of years. This research attempts to conduct a descriptive study of traditional settlement patterns, which relied on the capabilities of the surrounding areas to provide planning and architectural solutions based on the environmental factor. Establishing such a clear framework for these impacts can help in any future interventions or development processes in the region and ensure that any random or irregular interventions that may have occurred previously are not repeated. Which will preserve the components and sustainability of this ecosystem and maintain the harmony and integration between the elements of the architectural environment and the natural elements.

Making Edible Film from Jackfruit Seed Starch (Artocarpus Heterophyllus) with the Addition of Rosella Flower Extract (Hibiscus Sabdariffa L.) as Antioxidant

This study aims to determine the physical and chemical characteristics of the edible film of jackfruit seed starch (Artocarpus heterophyllus) added with antioxidant rosella flower extract (Hibiscus sabdariffa). The type of plasticizer used is glycerol. The best treatment in this study was the jackfruit seed edible film with the addition of rosella flower extract 3% (v/v) with the results obtained respectively for a thickness of 0.09 mm, tensile strength 0.003332 N/mm2, elongation percentage 126.36%, elasticity 0.002637 Kgf/mm2, pH 6.122, water absorption 61.67%, solubility 40%, water vapor transmission speed 0.6714 gram/hour m2, FTIR test results show that the process of making edible film in this research is the mixing process Physics, the shelf life of edible film at room temperature is 6 days and at cold temperatures is 8 days, and has antioxidant activity with an IC50 value 219.948 ppm. The addition of rosella flower extract enhances another benefit of edible film which functions as a food protector from the oxidation process (antioxidant).

Identification of Factors Affecting Decisions to Adopt Pesticides at Lowland Rice Farms in Indonesia

Pesticides have been widely adopted in the farming industry to control weeds, pests, and diseases in order to minimize yield losses and maintain the quality of lowland rice products; however, farmers often over-apply pesticides. This study analyzed key factors that affected the decision of lowland rice farmers in adopting pesticides and the frequency of pesticide application. A double-hurdle model was used to estimate the factors that affected the decisions of farmers to adopt pesticides and determine the frequency of pesticide application. These results demonstrate that the adoption of pesticides was high (86%) at lowland rice farms in the study area. Lowland rice farmers were found to apply pesticides an average of eight times. Gender, age, education level, access to extension, farming experience, and access to credit significantly affected the decisions of farmers to adopt pesticides in controlling weeds, pests, and diseases at lowland rice farms. The independent variable also significantly affected the frequency of pesticide application. Towards the goal, government and non-government organizations had to increase human resources through education, agricultural extension services to young farmers had to be improved. Specifically, extension material was provided on environmentally-friendly methods of controlling weeds, pests, and diseases and other alternatives to reduce the use of pesticides at lowland rice farms.

Facadism: An Approach for Spatial Reconfiguration

Baghdad’s historical center is a rich site of heritage and cultural values, yet it suffers from urban deterioration. Many urban spaces and historical structures are aging, which has caused a decline in the vitality and function of axes and open spaces. This research is based on the principle of facadism as one of the main approaches to the preservation and rehabilitation of historic and traditional buildings. The purpose is to address urban degradation and the spatial reconfiguration of urban space in a way that promotes its sustainability and revitalization. This research aims to formulate a theoretical framework that includes a list of interference patterns and their role in spatial reconfiguration. This will be applied to the spatial reconfiguration and development of Al-Rasheed Street in the historic center of Baghdad. A questionnaire elicited the opinions of experts, designers, and implementers in academic and executive institutions on the possibility of reshaping local spaces using facadism. The results of the questionnaire showed that experts support the possibility of adopting this method in spatial reconfiguration in order to intervene in the degradation of historical environments, and also to create a homogeneous and interconnected urban environment that prevents the eradication of cultural and urban heritage. By adopting the preservation of a façade in its various forms, considerations need to be made regarding its compatibility with the nature of the problems in the study area and the ineffectiveness of the pattern of dismantling and transferring a building to another place. This is due to the importance of the historical place and the need to preserve all its historical items within the fabric, in addition to the effectiveness of some detailed patterns in different items of formation.

Vector Autoregressive Modeling of COVID-19 Incidence Rate in Nigeria

With the outbreak of COVID-19, a lot of studies have been carried out in various science disciplines to either reduce the spread or control the increasing trend of the disease. Modeling the outbreak of a pandemic is pertinent for inference making and implementation of policies. In this study, we adopted the Vector autoregressive model which takes into account the dependence that exists between both multivariate variables in modeling and forecasting the number of confirmed COVID-19 cases and deaths in Nigeria. A co-integration test was carried out prior to the application of the Vector Autoregressive model. An autocorrelation test and a test for heteroscedasticity were further carried out where it was observed that there exists no autocorrelation at lag 3 and 4 and there exists no heteroscedasticity respectively. It was observed from the study that there is a growing trend in the number of COVID-19 cases and deaths. A Vector Autoregressive model of lag 4 was adopted to make a forecast of the number of cases and death. The forecast also reveals a rising trend in the number of infections and deaths. The government therefore needs to put further measures in place to curtail the spread of the virus and aim towards flattening the curve.

Anaerobic Co-Digestion of Cow Manure and Palm Oil Mill Effluent (POME): Assessment of Methane Production and Biodegradation Efficiency

The performance of anaerobic co-digestion of cow manure and POME was evaluated. The anaerobic composting process was carried out by using semi-continuous reactors under the mesophilic condition (35 ± 1℃). The addition of POME to the on-going anaerobic composting of cow manure was applied stepwise within a cycle of HRT (20 days). Results showed that the anaerobic co-digestion reactor could produce methane at about six times higher (7.2 L CH4) than the control reactor (1.3 L CH4). An increasing of POME loaded to the on-going anaerobic composting cow manure culture (4% to 64%) did not affect pH of the culture in which pH was still stable between 7.11 and 7.5. Assessment of biodegradation efficiency revealed that nitrogen removal of the anaerobic co-digestion reactor was six times higher (21%) than the nitrogen removal of the control reactor (3.4%). This suggested that the anaerobic co-digestion reactor performed sufficiently well in which no organic acid as well as ammonia accumulated in the reactor that could be effective to decompose the organic matters.

Shaking Table Experiment on Seismic Performance of a Scaled-Down Arch Dam with Initial Crack

Seismic responses of cracked scaled-down arch dams were investigated by experiment on a shaking table. Two different curvature models (M1 and M2) were cast by using a plan concrete. Dams properties, including materials and dimensions, were carefully simulated. A significant earthquake magnitude with (7.7M) and water pressure were applied on the dam's models. Considering water and seismic loadings, the dynamic reactions of the arch dam's system were investigated. Both models showed crack overstresses or propagation on the dam's model as a result of seismic excitations. The arch dam with a higher degree of curvature was recorded 44 Mpa of stress evaluation which less by 30.7% of the arch dam with the lowest degree of curvature. The results indicated that raising the degree of curvature led to raising the dam's stability, earthquake resistance, less displacement, and less growth of tensile cracks.