scholarly journals THE INFLUENCE OF COMPLEX FERTILIZERS AND GROWTH REGULATOR ON SEED PRODUCTIVITY OF AWNLESS BROME

2021 ◽  
Vol 212 ◽  
pp. 33-39
Author(s):  
A. P. Eryashev ◽  
◽  
A. A. Kozlova ◽  
P. A. Eryashev ◽  
◽  
...  
Keyword(s):  
Seed Yield ◽  
Maximum Mass ◽  
Seed Number ◽  
Seed Productivity ◽  
Urban District ◽  
Factor B ◽  
Time Of Application ◽  
The Republic ◽  
Spraying Plants ◽  
Number Of Seeds

The article presents results of the experiments carried out on leached black soils of the Republic of Mordovia to identify the effect of liquid complex fertilizers and Albit on awnless brome seed productivity. For this purpose, a two-factor field experiment was laid on crops of awnless brome on the experimental field No. 1 of OAO “Mordoviyagosplem” in Ozerny village of urban district of Saransk city in 2018 - 2020 according to the following scheme: Factor A – Time of application of liquid complex fertilizers and Albit. 1 - At the beginning of spring growth, 2 - In the phase of stalk-shooting, 3 - In the phase of spring growth + in the phase of stalk-shooting. Factor B - Liquid complex fertilizers and Albit. 1. - Without usage of liquid complex fertilizers and Albit (control). 2. - Megamix-profi. 3. - Megamix nitrogen. 4 - Albit. The results of the research revealed that the height of generative shoots (99 - 105 cm) and the length of panicles (14.6 - 16.9 cm) did not change significantly in case of application of fertilizers and Albit; the maximum number of inflorescences was, in comparison with the control, in case of application of Megamix-profi (28.4 %), Megamix-nitrogen (28.9 %), Albit (27.8 %) at the time of spring growth and at the beginning of stalk-shooting with Albit application ( 30.6 %); the usage of Megamix - profi in the phase of stalk-shooting and growth + stalk-shooting led to a greater seed number in inflorescences (68.2 and 68.6 %). Albit contributed to an increase of the number of generative shoots at all periods of application (141, 137, 144 pieces / m2); the largest number of seeds in an inflorescence was noted when spraying plants with Megamix-profi and Albit at the time of spring growth (101.3 and 100.4 pcs.), Megamix - nitrogen – in the phase of stalk-shooting (101.6 pcs.); the application of Megamix-nitrogen at the time of spring growth promoted the maximum mass of 1,000 seeds (4.17 g); spraying with Megamix-nitrogen (531 - 466 kg / ha) and Albit (507 - 466 kg / ha)at the beginning of spring growth and shooting, as well as with Megamix-profi (508 kg / ha) in the phase of stalk-shooting led to the maximum seed yield , with an advantage over the control by 35.1 - 29.0 %; 18.6 - 17.8 % and 29.2 %

Yield response of narrow-leafed lupin plants to variations in pod number

1998 ◽  
Vol 49 (1) ◽  
pp. 63 ◽  
Author(s):  
J. A. Palta ◽  
C. Ludwig
Keyword(s):  
Seed Size ◽  
Seed Yield ◽  
Plant Density ◽  
Yield Response ◽  
Seed Number ◽  
Subsequent Removal ◽  
Seed Filling ◽  
Specific Number ◽  
Pod Number ◽  
Number Of Seeds

The effect of pod number on the seed yield and components of seed yield was examined for narrow-leafed lupin (Lupinus angustifolius L.) grown at a plant density of 36 plants/m2 in both the glasshouse and the field. Diflerent numbers of pods per plant in the glasshouse-grown lupin were generated by the application of N6-benzylaminopurine (BAP) to a specific number of flowers to ensure artificially that they set pods, and the subsequent removal of the remaining untreated flowers. Pod number ranged from 6 to 65 pods/plant in the glasshouse and was naturally distributed from 2 to 22 pods/plant in the field. Increases in seed yield per plant occurred as pod number per plant increased from 2 to 30 pods. No further increases in seed yield resulted when pod number per plant increased from 30 to 55 pods. Seed yield per plant was depressed as pod number increased from 55 to 65 pods. Seed size fell as pod number per plant increased over 20 pods and was less affected once the number of seeds per pod was reduced. The reduction in seed number per pod resulted from an increase in the number of seeds that aborted during seed filling. The data suggest that at a plant density of 36 plants/m2 there is potential for improving seed yield per plant by increasing the number of pods that reach maturity, provided it does not exceed 30 pods/plant. However, if consideration is given to producing large seeds, often preferred by buyers, the number of pods per plant should not exceed 20 pods.

THE EFFECT OF ENVIRONMENT, APEX EXCISION AND FLOWER REMOVAL ON FERTILITY COMPONENTS OF FABA BEANS (Vicia faba L.)

1984 ◽  
Vol 64 (1) ◽  
pp. 95-103 ◽  
Author(s):  
G. G. ROWLAND ◽  
G. DUC ◽  
J. PICARD
Keyword(s):  
Vicia Faba ◽  
Seed Yield ◽  
Seed Number ◽  
Vicia Faba L ◽  
Faba Beans ◽  
Pod Number ◽  
Number Of Seeds

An experiment was conducted at Dijon, France and Saskatoon, Canada to determine if apex excision or flower removal had an effect on ovule fertilization. Two lines of faba beans, cvs. Strube and 370, showed no effect of apex excision or flower removal on the frequency of ovule fertilization. The fertilization frequency, which averaged 55% for the experiment, was 10% higher at Dijon than Saskatoon and 30% higher in Strube than 370. Young-pod number, pod number, seed number and seed yield were all greater at Dijon. The abortion of fertilized flowers was high for all treatments and lines but particularly so in Strube with no flower removal. The data indicated that abortion was occurring at the pod level and not the seed level, suggesting that the average number of seeds per pod could be increased if the ovule fertilization frequency per flower could be improved.Key words: Vicia faba, fertilization frequency, fertility components, apex excision.

scholarly journals Effect of Genotype and Density on the Productivity of Mungbean

2016 ◽  
Vol 19 (1) ◽  
pp. 11-17
Author(s):  
R Yeasmin ◽  
MA Karim ◽  
MM Haque ◽  
MAB Mia
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Light Transmission ◽  
Block Design ◽  
Plant Spacing ◽  
Seed Number ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Plant Densities ◽  
Number Of Seeds

An investigation was carried out at the experimental field of the Department of Agronomy, Bangabandhu Sheikh Mujibur Rahman Agricultural University, Gazipur during September to November 2014 to evaluate the productivity of three mungbean genotypes, viz., GK-24 (G1), GK-63 (G2) and BU mug 4 (G3) under four plant spacing (densities) such as i) 15 cm x 10 cm= 66 plants m-2 (D1), ii) 20 cm x 10 cm= 50 plants m-2 (D2), iii) 25 cm x 10 cm= 40 plants m-2 (D3) and iv) 30 cm x 10 cm=33 plants m-2 (D4). The experiment was conducted in a factorial randomized complete block design with three replications. A wide variation among the genotypes was observed in relation to light transmission, yield, and yield contributing characters. At 30 cm x 10 cm spacing (D4) the highest light transmission ratio (LTR) was observed in G1 genotype (57.92) and the lowest LTR value in G2 genotype (46.92). Among the three genotypes, G1 produced the highest seed yield (1094 kg ha-1). But highest seed number pod-1 was found in D2 (11.61) while maximum pods plant-1 (11.08) was in D4 treatment followed by D3 (10.59). Among the four plant densities, treatment D3 showed the highest 1000-seed weight (50.30 g). The highest seed yield (1114 kg ha-1) was recorded in the treatment D4. Among the interaction, the highest number of seeds pod-1 (12.20) was found in the treatment D1G3, though the highest number of pods plant-1(12.03) was in treatment D4G1 but the1000-seed weight was the highest (51.92 g) in D3G1. The highest seed yield (1230 kg ha-1) was recorded from treatment D4G1. The result showed that GK 24 genotype performed the best in all respects of yield and yield attributes at 30 cm x 10 cm spacing compared to other treatments.Bangladesh Agron. J. 2016, 19(1): 11-17

scholarly journals Seed productivity of alfalfa varieties and its components

2020 ◽  
pp. 37-39
Author(s):  
Tatyana Nikolaevna Popova
Keyword(s):  
Correlation Analysis ◽  
Seed Yield ◽  
High Potential ◽  
Herbaceous Plant ◽  
Seed Productivity ◽  
Seed Harvest ◽  
New Varieties ◽  
Alfalfa Varieties ◽  
Number Of Seeds

Alfalfa blue is a perennial, multi-cut herbaceous plant. The expansion of the lucerne sowing areas does not occur due to the lack of sufficient sowing material, which in turn is due to low seed productivity. The solution to this problem is possible only when moving to new varieties with high potential for seed yield and introducing improved technologies. Our article shows the characteristic of new varieties of  alfalfa of the Ershovsky selection. New varieties Serena and Natalie had the highest seed harvest rates in 9 years. Natalie variety on average for 9 years (2009-2017) by the number of brushes on one stem, the number of seeds in the bean and the number of beans in the brush was higher than the Uzen variety-standard by 5.0 respectively; 11.0 and 6.0%. According to the correlation analysis of the indicators, the crop of seeds and seeds in the bean is significant positive.

scholarly journals Assessmentof seed productivity of complex hybrid populations of red clover

2021 ◽  
Vol 22 (1) ◽  
pp. 47-46
Author(s):  
I. V. Shikhova ◽  
E. V. Popova ◽  
E. G. Arzamasova
Keyword(s):  
Seed Yield ◽  
Red Clover ◽  
Seed Productivity ◽  
Seed Material ◽  
Yield And Quality ◽  
Sum Of Effective Temperatures ◽  
Phases Of Development ◽  
Beginning Of Flowering ◽  
Complex Hybrid ◽  
Number Of Seeds

In the conditions of the Kirov region, the productivity of seeds of four complex hybrid populations (SGP) of red clover was studied, including those formed against an infectious fusarium background (SGPF). The research was carried out in the nursery for evaluating the seed productivity of 2017 sowing in comparison with the standard (st.) Dymkovsky for 2 years of use (y.u.). The characteristics of the SGP and SGPF according to winter hardiness, the start of vegetation phases of development, plant height, structure of seedgrass stand, yield and quality of seed material are given. All studied varieties were more productive than the standard (1.97 c/ha). Reliably high seed yield on average for 2 years was shown by SGPF-158-3 – 2.48 c/ha, SGP-188 – 2.32 c/ha, SGPF-157-3 – 2.16 c/ha. According to fruiting indicators, in 2019SGPF-158-3 with small heads, but with the largest number of flowers and seeds (132.2 and 77.4 pcs., respectively), good seediness (58.8 %) and high seed weight per head (0.153 g) was selected. Also, high rates were noted in the populations of SGPF-157-3 and SGPF-160-3. A strong correlation between seed yield and fruiting rates was revealed: the number of flowers in the head (r = 0.92), the total number of seeds in the head (r = 0.92), the number of filled seeds in the head (r = 0.94), the seediness of the head (r = 0.90), the total weight of seeds in the head (r = 0.85), the mass of filledseeds in the head (r = 0.87). A close positive correlation was noted between the hydrothermal coefficient (HTC) value and length (r = 0.86), width (r = 0.86) of the red clover head during the intergrowth period “regrowth - the beginning of flowering”. It has been established that the average daily air temperature and the sum of effective temperatures during the “beginning of flowering - ripening” period have a positive effect on the fruiting performance: “seediness of the heads” (r = 0.97 and r = 0.87) and “the number of seeds in the head” (r = 0.95 and r = 0.89, respectively). In the same interphase period, a close negative dependence of the indicated fruiting indices on the HTC values was revealed (r = -0.95 and r = -0.94). The sowing qualities of the seeds of the 2019 harvest were determined; it was found that all seed material corresponds to the category of “original and elite seeds”. As the result of the research, the populations of red clover SGPF-158-3, SGP-188 and SGPF-157-3, superior to st. Dymkovsky on seed productivity (by 0.51; 0.35 and 0.9 c/ha, respectively, LSD05 = 0.12 c/ha) and fruiting indicators, were selected.

STUDY OF EFFECT OF EMS, MMS AND GR ON YIELD CONTRIBUTING TRAITS IN URDBEAN, VIGNA MUNGO

2017 ◽  
Vol 23 (1) ◽  
Author(s):  
A. B. SAGADE
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Inhibitory Effect ◽  
Individual Plant ◽  
Mean Values ◽  
Methane Sulphonate ◽  
Pod Length ◽  
100 Seed Weight ◽  
Number Of Seeds

The study of the effect of three well known mutagens, ethyl methane sulphonate (EMS), methyl methane sulphonate (MMS) and gamma rays (GR) on the yield contributing traits of the urdbean variety TPU-4 were carried out in the M3 generation. Effect of selected mutagenic treatments/doses of EMS (0.02, 0.03 and 0.04 M), MMS (0.0025, 0.05 and 0.01 M) and (GR) (30, 40 and 50 KR) on different yield contributing traits like plant height, plant spread, number of pods per plant, pod length, number of seeds per pod, seed yield per plant and 100 seed weight were analyzed in the M3 populations of the variety TPU-4. Seeds of M2 plants and control were harvested separately and sown to raise M3 population.. Genetic variabilty in the mutagen administered M3 progeny of the urdbean variety TPU-4 was analyzed by employing statistical methods. Data on mean values and shift in the mean of seven quantitative traits was evaluated on individual plant basis. The experimental findings revealed that concentrations / dose of the all these mutagens showed inhibitory effect on plant height, number of pods per plant, pod length and number of seeds per pod. Lower concentrations of mutagens exerted a promotory effect on plant spread, 100 seed weight and seed yield per plant while higher concentrations of these mutagens inhibited them to different extent.

scholarly journals Effect of sulphur on the seed yield and oil content of sesame (Sesamum indicum L.)

2019 ◽  
Vol 17 (1) ◽  
pp. 33-38
Author(s):  
Swapan Kumar Paul ◽  
Mosa Morsheda Khatun ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Oil Content ◽  
Dry Matter Production ◽  
Production Plant ◽  
Matter Production ◽  
Stover Yield ◽  
Number Of Seeds ◽  
Number Of Branches

Sulphur is a component of plant amino acids, proteins, vitamins, and enzyme structures which influence the productivity of oil seed and total oil content. The experiment was conducted to find out the effect of sulphur on the seed yield and oil content of sesame in Bangladesh. The experiment comprised three varieties of sesame viz. Binatil-2, Binatil-3 and BARI Til-4 and six levels of sulphur (S) viz. 0, 10, 20, 30, 40 and 50 kg S ha–1. The experiment was laid out in a randomized complete block design with three replications. Dry matter production, crop characters, yield components, seed yield and oil content were significantly influenced by variety, level of sulphur and their interaction. The highest dry matter production plant–1 at 50 DAS (17.56 g), plant height (101.3 cm), number of branches plant–1 (3.66),  number of pods plant-1 (41.56), number of seeds pod-1 (58.83),  seed yield    (747.2 kg ha-1), stover yield (2243.0 kg ha–1) and oil content (40.03%) were obtained in BARI Til-4 while the corresponding lowest values of all parameters were recorded in Binatil-2. In case of sulphur application, the highest dry matter production plant–1 at 50 DAS (20.81 g), plant height (109.7 cm), number of branches plant–1 (3.87),  number of pods plant–1 (46.13),  number of seeds pod-1 (56.67),  seed yield (800.0 kg ha–1), stover yield (2787 kg ha–1 ) and oil content (43.97%) were obtained when crop was fertilized with 30 kg S ha–1 while the lowest seed yield (502.2 kg ha–1), stover yield (1550.0 kg ha–1) and oil content (32.80%) were obtained in control (0 kg S ha–1). BARI Til-4 fertilized with 30 kg S ha–1 produced the highest dry matter plant–1 at 50 DAS (24.80 g), number of pods plant–1 (51.13), seeds pod–1 (62.0) and seed yield (1011.0 kg ha–1). The highest oil content (43.97%) was also recorded in BARI Til-4 fertilized with 30 kg S ha–1, which was as good as that of BARI Til-4 fertilized with 40 kg S ha–1. Therefore, BARI Til-4 fertilized with 30 kg S ha–1 can be considered as a promising practice in respect of seed yield and oil content of sesame in Bangladesh. J. Bangladesh Agril. Univ. 17(1): 33–38, March 2019

Morphological and physiological traits associated with seed yield in different chickpea (Cicer arietinum L.) genotypes under irrigated andwater‐deficit environments

2011 ◽  
Vol 1 (6) ◽  
pp. 260-267
Author(s):  
Reza Talebi ◽  
Ezzat Karami
Keyword(s):  
Chlorophyll Content ◽  
Water Deficit ◽  
Seed Yield ◽  
Seed Weight ◽  
Significant Negative Correlation ◽  
Physiological Traits ◽  
Positive Correlation ◽  
Chickpea Cultivar ◽  
High Level ◽  
Number Of Seeds

The morpho â€physiological traits associated with seed yield in chickpea (Cicerarietinum L.) were evaluated on thirty five chickpea genotypes under twodifferent water regimes. In optimum condition, the highest correlation wasbelonged to number of seeds/plant and number of pods/plant (0.944**) andin water deficit condition, the strongest correlation of seed yield was observedwith number of seeds/plant (0.875**), number of pods/plant(0.789**) and 100  â€seed weight (0.438**). Physiological traits (RWC, Chlorophylland Carotenoid) indicated low and positive correlation with yield, buthigh positive correlation with other seeds yields related traits in optimumcondition while, under water deficit condition, chlorophyll content and RWChad low and non â€significant negative correlation with seeds yield. Carotenoid,number of seeds/plant and 100 â€seed weight showed more direct positiveeffect on yield in optimum environment and in stress condition, numberof seeds/ plant and 100 â€seed weight showed highest direct effect on seedyield. Results of factor analysis showed that four factors explained 88.54%and 34.5% of the total variance caused in the characters in optimum andwater deficit environment, respectively. In general, the results suggestedthat a chickpea cultivar, for increased yield under non â€stress conditions,should have maximum number of seeds and pods per plant and under stressconditions should have maximum number of seeds and pods per plant andalso keep the high level of RWC and chlorophyll content in their leaves. Thus,identifying these traits as selection criteria in chickpea breeding programmay be useful for breeders to introduce suitable drought resistant chickpeacultivars for arid regions.

Effect of method and time of application of nitrogen fertiliser on yield and quality of seed of creeping red fescue

2000 ◽  
Vol 80 (4) ◽  
pp. 809-811 ◽  
Author(s):  
N. A. Fairey ◽  
L. P. Lefkovitch
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Early Spring ◽  
Festuca Rubra ◽  
Grass Seed ◽  
Red Fescue ◽  
Time Of Application ◽  
Vigorous Plant ◽  
Tiller Density

Six trials were conducted on commercial seed fields of creeping red fescue (Festuca rubra L. var. rubra) in the Peace region to evaluate the sensitivity of seed production to the method and time of application of N fertiliser. In each trial, 68 kg ha−1 N was applied using three methods (surface-broadcast, granular, ammonium nitrate 34-0-0; foliar/soil spray of 28-0-0 solution N; soil-injected 28-0-0 solution N) at each of three times (fall, early spring, late spring). No statistically significant (P = 0.05) interaction, or main effect, of method and time of N were revealed for seed yield, fertile tiller density or for several seed quality characteristics. Seed yield varied greatly among trials (142 to 1240 kg ha−1) and averaged 566 kg ha−1. The results indicate that there is considerable flexibility in the method and time of application of N fertiliser for seed production of creeping red fescue in the Peace region, provided it is applied before the commencement of vigorous plant growth in the spring. Key words: Creeping red fescue, Festuca rubra L., nitrogen fertility, grass seed production, grass seed quality

scholarly journals Успадкування господарсько цінних ознак у гібридів F1 квасолі звичайної в умовах Лівобережної частини Лісостепу України

2013 ◽  
pp. 33-36
Author(s):  
С. І. Силенко ◽  
О. С. Силенко
Keyword(s):  
Seed Yield ◽  
First Generation ◽  
Seed Mass ◽  
Growing Season ◽  
F1 Hybrids ◽  
Lower Tier ◽  
Number Of Seeds

Доведено, що ступінь фенотипового домінування у гібридів F1 може варіювати від hp > +1 до hp < -1 залежно від компонентів схрещування. Встановлено, що переважна більшість гібридів F1 тривалість веґетаційного періоду та його міжфазних періодів успадковують за типами позитивного наддомінування та позитивним домінуванням. Успадкування висоти рослин відбувається за типами позитивного домінування, проміжного успадкування та за типом негативного домінування. Характер успадкування висоти прикріплення нижнього ярусу бобів у значній мірі визначається поєднанням батьківських компонентів. Так, у першому поколінні у гібридних комбінаціях спостерігається явище наддомінування. За ознаками урожайності та її елементів (урожайність насіння, маса насіння з рослини, маса 1000 насінин, кількість бобів на рослині, кількість насінин із рослини, кількість насінин у бобі) у всіх без виключення гібридів першого покоління спостерігався гетерозис. It was demonstrated that the degree of phenotypic predominance in F1 hybrids can vary from hp to hp < +1 > -1 depending on mating components. The vast majority of the F1 hybrids inherit the length of the growing season and its interphase by type of over& positive dominance. F1 hybrids inherit the height of plants by types of positive dominance, intermediate inheritance and negative domination. The height of the attachment of the lower tier of the beans is largely determined by a combination of parent components. Thus, in the first generation in hybrid combinations there is the phenomenon of over dominance. Due to the yield and its components (seed yield, seed mass per plant, 1000 seeds, number of beans per plant, number of seeds per plant, number of seeds per seedpod) in all first generation hybrids heterosis is observed.

Sign in / Sign up

Export Citation Format

Share Document