scholarly journals Comparative study of fodder halophytes in saline and alkaline soils

2020 ◽  
Vol 34 (03) ◽  
Author(s):  
Sourabh Kumar ◽  
Ashwani Kumar ◽  
Praveen Kumar ◽  
Anita Mann ◽  
Pooja . ◽  
...  
Keyword(s):  
Sea Water ◽  
Block Design ◽  
Research Area ◽  
Stress Conditions ◽  
Saline Soils ◽  
Alkaline Soils ◽  
Randomized Block Design ◽  
Saline And Alkaline Soils ◽  
Urochondra Setulosa ◽  
Number Of Branches

A research was conducted in 2014-15 to know the usefulness of halophytes on saline and sodic stress with 3 halophytes and 6 treatments i.e Control (pH-7.0 and ECe-0.56), Sodic (pH-9.5 and 10.0) and Saline (ECe- 15, 25 and 35 dSm-1) which was done in Factorial randomized block design in small micro-plots in research area at Central Soil Salinity Research Institute, Karnal, Haryana. We found that pHs of soils were less and ECe of soils were more affected by growing halophytes in this experiment. Dicanthium had more number of tillers and Suaeda had more number of branches under sodic stress. In case of Urochondra Setulosa, number of tillers had increased up to pH-9.5 thereafter it decreased. Likewise, all other plant nutrients concentration in the soil was found to be reduced which showed that halophytes utilized these nutrients for their growth under the stress conditions. the results showed that Dicanthuim annulatum can be grown as a fodder crop under low to high sodic stress conditions whereas Suaeda nudiflora and Urochondra setulosa can be grown easily under saline soils/ irrigated condtions and in areas with sea water.

scholarly journals Pertumbuhan dan Hasil Kedelai di Lahan Rawa Lebak dengan Aplikasi Pupuk Hayati dan Kimia

2018 ◽  
Vol 45 (3) ◽  
pp. 263
Author(s):  
Endriani , ◽  
Munif Ghulamahdi ◽  
Dan Eko Sulistyono
Keyword(s):  
Glycine Max ◽  
Soil Fertility ◽  
Block Design ◽  
Randomized Block Design ◽  
National Production ◽  
Glycine Max L ◽  
Number Of Leaves ◽  
Four Levels ◽  
P Fertilizers ◽  
Number Of Branches

Soybean (Glycine max L. Merrill) demand is high in Indonesia, however national production is low, therefore improving productivity is important. The research was aimed to determine the effect of application of biofertilizer containing N- fixing and P- solubilizing bacteria on the growth and production of soybean in lowland swamp. The experiment was conducted  at  Labuhan Ratu VI Village, District of Labuhan Ratu, East Lampung Regency from September to December 2014. The experiment was arranged in factorial randomized block design with three replications. N and P fertilizers were applied in four levels. Doses of N were 0, 11.25, 22.50, 33.75 kg ha-1, doses of P were 0, 36, 72, 108 P2O5 kg ha-1, in combination with and without biofertilizer application. The results showed that interaction between biofertilizer and N significantly affected number of branches and number of leaves at maximum vegetative phase. The influence of three types of fertilizer had no significant effect on the productivity of soybean in lowland swamp with soil pH of 7.0 and medium soil fertility. It is recommended to apply Biofertilizer + 11,25 kg N ha-1 + 36 kg P2O5 ha-1 to obtain high soybean production in lowland swamp area.<br /><br />Keywords: nitrogen, phosphate, productivity, soil fertility<br /><br />

scholarly journals COMBINING ABILITY STUDIES FOR GROWTH AND YIELD CHARACTERS OF BHENDI ABELMOSCHUS ESCULENTUS (L.) MOENCH)

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
S. Kalaiselvan ◽  
S. Anuja
Keyword(s):  
Plant Height ◽  
Combining Ability ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
F1 Hybrids ◽  
Randomized Block Design ◽  
Final Harvest ◽  
Weight Number ◽  
Number Of Branches

The present investigation consisted of 9 lines, 3 testers with their 27 F1 hybrids developed through line x tester mating fashion in randomized block design with three replications. Parents and hybrids differed significantly for gca and sca effects, respectively. Among the parents, maximum gca effect was found in EC 112241 and Aruna for inter node distance, EC 112241 and Arka Anamika for single fruit weight, EC 109454, EC 169344 and Arka Anamika for number of branches per plant, EC 169331 and Arka Anamika for number of fruits per plant, EC 109454 and Aruna for plant height at final harvest. The crosses exhibited maximum positive significant sca effect was observed in EC 112241 x Aruna, EC 109454 x Kashi Kranti and EC 112264 x Aruna were found as good specific combiners for single fruit weight, number of branches per plant and number of fruits per plant respectively. The hybrid EC 112264 x Aruna exhibited maximum significant negative sca effects for inter node distance and plant height at final harvest.

scholarly journals Genetic Divergence Analysis of Rice Genotypes under Salt Stress Environment

2020 ◽  
pp. 33-39
Author(s):  
Anuj Kumar ◽  
D. K. Dwivedi ◽  
Pradeep K. Bharti ◽  
Shivani . ◽  
Preeti Kumari ◽  
...  
Keyword(s):  
Salt Stress ◽  
Normal Condition ◽  
Genetic Divergence ◽  
Block Design ◽  
Stress Conditions ◽  
Saline Condition ◽  
Randomized Block Design ◽  
Cluster Distance ◽  
Rice Genotypes ◽  
Cluster 2

The present investigations were conducted in randomized block design with three replications within the net house of the department of PMB&GE, A. N.D.U.A.T, Kumar Ganj, Ayodhya to estimate the genetic divergence under normal and salt stress conditions involving 20 rice genotypes during Kharif 2018-19, on the basis of relative parameters of D2 values, the clustering pattern of 20 rice genotypes under normal and salt stress conditions were grouped into five non-overlapped clusters. Under normal condition, Cluster III having highest 7 rice genotypes, Cluster II having 5 genotypes, cluster V having 4 genotypes and IV having highest 3 rice genotype. Cluster I having only one genotype. Under saline condition, Cluster I having highest rice 6 genotypes, cluster III having 5 genotypes and cluster II & IV having 4 genotypes respectively. Cluster V having only one genotype. It means the genetic similarity was found in the genotypes were expressed within the cluster and the pattern of distribution of genotypes in various clusters exhibited that topographical diversity wasn't associated with ancestral diversity as genotypes of same countryside were grouped into different cluster and vice-versa. The highest inter cluster distance was recorded between cluster 2 and cluster 5 (26108.030) followed by between cluster 1 and cluster 5 (18550.010), cluster 3 and cluster 5 (15231.860), cluster 4 and cluster 5 (5335.860) in normal condition and in saline condition the maximum inter cluster distance was existed between cluster 4 and cluster 5 (2344.091) followed by between cluster 3 and cluster 5 (2067.610), cluster 2 and cluster 5 (1447.564), cluster 1 and cluster 5 (1238.095). The results showed extensive variation from one cluster to other in respect of cluster means for all parameters, which represented that genotypes having distinctly different mean performance for various characters were reported into different clusters.Rice

scholarly journals PENGARUH JARAK TANAM DAN MULSA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN TOMAT (Lycopersicon esculentum Mill) PADA MUSIM PENGHUJAN

2018 ◽  
Vol 11 (2) ◽  
pp. 1-9
Author(s):  
Amelia Nur Suprianto ◽  
Tri Kurniastuti
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Plastic Mulch ◽  
Tomato Plants ◽  
Straw Mulch ◽  
Randomized Block Design ◽  
Number Of Branches

This research aims 1) To determine the effect of interaction of different plant spacing and the provision of mulch to growth and yield of tomato plants. 2) To know the different spacing affect the growth and yield of tomato plants. 3) To know the use of mulch type effect on growth and yield of tomato plants. This research was conducted by using Randomized Block Design in Factorial (RAK) with 2 factors, first factor is plant spacing (J) consisting of 3 levels ie 40x30 cm (J1), 40x50 cm (J2), 40x70 cm (J3) . The second factor is mulch (M) consisting of 3 levels ie: without mulch (M0 / control), straw mulch (M1), plastic mulch (M2). The variables observed were plant height, number of branches, number of bunches, number of fruit, and fruit weight. Data were analyzed by using variance analysis (Anova), 5% level. The results showed that: There was no interaction between plant spacing and mulch on growth and yield of tomato plants. Treatment spacing 40x50 (J2) effect on the number of bunches of 35 HST, the weight of the first harvest fruit and total fruit weight. The use of straw mulch type (M1) has an effect on plant height, number of branches, number of 35 HST bunches, and total fruit weight.

scholarly journals Effect of organic inputs and mulching on growth and yield of roselle (Hibiscus sabdariffavar. sabdariffa)

2021 ◽  
Vol 23 (2) ◽  
pp. 219-222
Author(s):  
S BHARADHI ◽  
Keyword(s):  
Block Design ◽  
Poultry Manure ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Organic Manures ◽  
Combined Application ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Four Levels ◽  
Number Of Branches

A field experiment was carried out on a farmer’s field at Kannitamilnadu village in Cuddalore district, Tamilnadu during 2018 to find out the suitable organic inputs and pattern of mulching for better growth and yield of roselle (Hibiscus sabdariffavar. sabdariffa). The experiment was laid out in a factorial randomized block design with five levels of organic manures and four levels of mulching with three replication.. Best of the interaction effect was due to the combined application of 25 t FYM + 3 t poultry manure ha-1+ plastic mulch (M3S2) which recorded the highest values for all growth and yield parameters viz., plant height (228.3 cm), number of branches (14.5), leaf area (308.9 cm2), number of calcyes/plant (33.5), calyx yield/plant (233.9 g) and calyx yield/ha (6568.75 kg). The lowest values of these parameters were recorded under control (no organics and no mulching) treatment

scholarly journals Yield potential of linseed genotypes influenced by nutrient levels under rainfed condition in Vidarbha region

2021 ◽  
Vol 17 (2) ◽  
pp. 199-203
Author(s):  
J.R. Katore ◽  
Beena Nair ◽  
Shilpa Rananaware ◽  
Rupali Damdar ◽  
J.M. Parbat ◽  
...  
Keyword(s):  
Block Design ◽  
Growth And Yield ◽  
Yield Potential ◽  
Nutrient Level ◽  
College Of Agriculture ◽  
Yield Attributes ◽  
Rainfed Condition ◽  
Nutrient Levels ◽  
Randomized Block Design ◽  
Number Of Branches

All India coordinated Research Project on linseed conducted a field experiment on Agriculture Farm, College of Agriculture, Nagpur under Dr. PDKV, Akola, Maharashtra during Rabi Season of 2019-20 in Factorial Randomized Block Design with three replication. Three genotypes NL – 356, JLS-95, T-397 were tested with three nutrient levels i.e. 50 % RDF, 100% RDF and 150 % RDF. The result revealed yield potential of the entry NL-356 was 26% highest over JLS-95 and 13% more on T-397 under rainfed condition. However, the increase in nutrient level from 50 % RDF to 150 % RDF influence the growth and yield attributes which favours the increase in yield. Therefore, it is concluded that genotype NL 356 with 100 % RDF achieve higher growth rate i.e. plant height, number of branches as well as yield attributes number of capsules per plant, number of seed per capsule and highest NMR and B:C ratio.

scholarly journals PENGARUH JARAK TANAM DAN MULSA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN TOMAT (Lycopersicon esculentum Mill) PADA MUSIM PENGHUJAN

2018 ◽  
Vol 11 (1) ◽  
pp. 1-9
Author(s):  
Amelia Nur Suprianto ◽  
Tri Kurniastuti
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Plastic Mulch ◽  
Tomato Plants ◽  
Straw Mulch ◽  
Randomized Block Design ◽  
Number Of Branches

This research aims 1) To determine the effect of interaction of different plant spacing and the provision of mulch to growth and yield of tomato plants. 2) To know the different spacing affect the growth and yield of tomato plants. 3) To know the use of mulch type effect on growth and yield of tomato plants. This research was conducted by using Randomized Block Design in Factorial (RAK) with 2 factors, first factor is plant spacing (J) consisting of 3 levels ie 40x30 cm (J1), 40x50 cm (J2), 40x70 cm (J3) . The second factor is mulch (M) consisting of 3 levels ie: without mulch (M0 / control), straw mulch (M1), plastic mulch (M2). The variables observed were plant height, number of branches, number of bunches, number of fruit, and fruit weight. Data were analyzed by using variance analysis (Anova), 5% level. The results showed that: There was no interaction between plant spacing and mulch on growth and yield of tomato plants. Treatment spacing 40x50 (J2) effect on the number of bunches of 35 HST, the weight of the first harvest fruit and total fruit weight. The use of straw mulch type (M1) has an effect on plant height, number of branches, number of 35 HST bunches, and total fruit weight.

scholarly journals Daya hasil beberapa varietas Kedelai unggul nasional di Distrik Manokwari Barat dan Sidey Provinsi Papua Barat

Cassowary ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 106-113
Author(s):  
Agustinus Warbaal ◽  
Januarius Renwarin ◽  
Nouke L. Mawikere ◽  
Yohanis A. Mustamu
Keyword(s):  
Plant Height ◽  
Analysis Of Variance ◽  
Confidence Level ◽  
Block Design ◽  
Local Variety ◽  
Randomized Block Design ◽  
West Papua ◽  
High Yielding Varieties ◽  
Papua Barat ◽  
Number Of Branches

This study aims to examine the yield of 5 national superior soybean varieties in two different locations and select high yielding varieties to be developed in West Papua Province. This research was conducted for four months, which was located in 2 places namely West Manokwari and Sidey District in West Papua Province. The study used a Randomized Block Design with the treatment of 6 varieties (5 national varieties and 1 local variety), which were repeated 4 times so that 24 experimental units per location were obtained. The data obtained were analyzed using analysis of variance (ANOVA) and if the treatment had a significant effect it was continued with the DMRT test at a 95% confidence level. The results showed that the varieties tested were highly significant for plant height, number of branches, total number of pods, number of empty pods, number of filled pods, weight of planting seeds, weight of seeds per plot, weight of corrected seeds, and weight of 100 dried seeds. The yield of 3 varieties suitable for development in West Papua Province are Rajabasa varieties 1.63 tons/ha, Burangrang 1.8 tons/ha, and Detam-2 2.35 tons/ha.

scholarly journals The Effect of Charcoal and NPK Fertilizer on the Growth of Two Peppers Varieties on the Sandy Loamy Soil in Sinyea, Liberia

2019 ◽  
pp. 1-9
Author(s):  
James Flomo Gaydaybu ◽  
Moses Mulbah Waiwaiku ◽  
Philip G. S. Ndaloma ◽  
Francis Gbelee ◽  
Lamin K. M. Fatty
Keyword(s):  
Plant Height ◽  
Growth Parameters ◽  
Design Method ◽  
Block Design ◽  
Capsicum Annum ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Npk Fertilizer ◽  
Better Than ◽  
Number Of Branches

This research shows the effect of charcoal and NPK fertilizer on the growth of two pepper (Capsicum annum L) Varieties. The treatment levels were: control (no treatment), charcoal (2 tons ha-1), NPK 15:15:15(150 kg ha-1) and charcoal and NPK combination. The experimental plots were 32 in total with 1.5 squares meter each and treatments were replicated 2 times in each block with 4 blocks in total. The Factorial Design was conducted and fitted with Complete Randomized Block Design Method to assigned plots with treatments and pepper varieties. The growth parameters considered were: plant height, number of leaves, number of branches, leaves length, leaves width and plant diameter. The data analyzed indicated that Local pepper performed better than Jalapeno pepper for all treatments. For plant height charcoal plots performed better than control with these means 28 cm, 64 cm and 72 cm for date 1, 2, and 3 respectively (Date 1, 2 and 3 as 30, 60 and 90 days after transplanting respectively). The Local pepper performed better than Jalapeno in growth with these plant height means 31 cm, 86 cm, and 96 cm for date 1, 2, and 3 respectively. Bigger stem diameters were recorded for the Local pepper and even wider leaf. The Local pepper performed better than the Jalapeno pepper at all levels of growth. The combination of charcoal and NPK had the best growth results over all the treatments.

scholarly journals Vegetative and productive performance of two soybean cultivars at different plant densities

2021 ◽  
Vol 7 ◽  
pp. 1-12
Author(s):  
Gustavo Lourenço Bomtempo ◽  
Éder Matsuo ◽  
Mario Carmo Oda
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Spatial Arrangement ◽  
Plant Population ◽  
Productive Performance ◽  
Soybean Cultivars ◽  
Randomized Block Design ◽  
Plant Densities ◽  
Set Up ◽  
Number Of Branches

The spatial arrangement and plant population have been highlighted as fundamental tools for increasing productivity. The objective was to evaluate the vegetative and productive performance of two soybean cultivars at different plant densities. Seeds of soybean cultivars (TMG 7063 IPRO and BS 2606 IPRO), recommended for the Alto Paranaíba region in the state Minas Gerais, were used and sown at seven different densities (8, 10, 12, 14, 16, 18 and 20 plants meter-1, equivalent to 160, 200, 240, 280, 280, 320, 360 and 400 thousand plants hectare-1, where they were evaluated in the development stages R1 (plant height) and R8 (height of the insertion of the first pod, plant height, number of nodes, number of branches, productivity per plant and productivity per hectare). The experiment was set up according to a randomized block design, in the factorial scheme A x B, being factor A composed by the cultivars and factor B by plant densities with three repetitions (blocks). Increased plant population resulted in greater first pod insertion height and final plant height, fewer nodes and branches and the average yield per hectare increased linearly, with the TMG 7063 IPRO cultivar being more productive under these conditions (52.7 bags of 60 kg per hectare).

Sign in / Sign up

Export Citation Format

Share Document