scholarly journals Honey Mead Fermentation from Thai Stingless Bee (Tetragonula leaviceps) Honey using Ethanol Tolerant Yeast

2021 ◽  
Vol 67 (5) ◽  
pp. 503-510
Author(s):  
Pimprapa Chaijak ◽  
Purimprach Sinkan ◽  
Santipap Sotha
Keyword(s):  
Ethanol Tolerance ◽  
Alcoholic Beverage ◽  
Invertase Activity ◽  
Stingless Bee ◽  
Ethanol Stress ◽  
Microbial Fermentation ◽  
Tolerance Level ◽  
Enrichment Technique ◽  
Selection Of

Honey mead is a well-known conventional alcoholic beverage made by microbial fermentation of diluted honey. The selection of prospective yeasts for inoculation of honey-must with regard to honey mead quality determines the quality of mead production. The yeast consortium tolerant to ethanol stress was selected for this study using an enrichment technique. The activity of the invertase enzyme and the level of ethanol tolerance have been investigated. Thai stingless bee honey was used as a substrate, and the selected ethanol tolerant yeast consortium was used for mead fermentation. The results revealed that the PP03 had the highest invertase activity of 75.13±9.16 U/mL and the highest ethanol tolerance level of 12%. This is the first study using an ethanol tolerant yeast consortium to ferment honey mead from Thai stingless bee honey.  

ON THE EXPERT’S RIGHT TO BE PRESENT AT LEGAL PROCEEDINGS

2016 ◽  
Vol 15 ◽  
pp. 163-171
Author(s):  
M. G. Shcherbakovskiy
Keyword(s):  
Initial Data ◽  
Legal Proceedings ◽  
Reliable Assessment ◽  
Data Acquiring ◽  
Selection Of

The article discusses the reasonsfor an expert to participate in legal proceedings. The gnoseological reason for that consists of the bad quality of materials subject to examination that renders the examination either completely impossible or compromises objective, reasoned and reliable assessment of the findings. The procedural reason consists ofa proscription for an expert to collect evidence himself or herself. The author investigates into the ways of how an expert can participate in legal proceedings. If the defense invites an expert to participate in the proceedings, then it is recommended that his or her involvement should be in the presence of attesting witnesses and recorded in the protocol. In the course of the legal proceedings an expert has the following tasks: adding initial data, acquiring new initial data, understanding the situation of the incident, acquiring new objects to be studied, including samples for examination. An expert’s participation in legal proceedings differs from the participation of a specialist or an examination on the scene of the incident. The author describes the tasks that an expert solves in the course of legal proceedings, the peculiarities ofan investigation experiment practices, the selection of samples for an examination, inspection, interrogation.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

DESIGN, SIMULATION AND IMPLEMENTATION MONITORING SYSTEM FOR SYSTEM CONTROL C4 FEEDING PUMP FOR FEED VAPORIZATION IN THE BUTADIENE PLANT

2020 ◽  
Vol 1 (1) ◽  
pp. 31-35
Author(s):  
Fahmi Yunistyawan ◽  
Yunistyawan J Berchmans ◽  
Gembong Baskoro
Keyword(s):  
Motor Control ◽  
Control System ◽  
Field Operator ◽  
System Control ◽  
Variable Speed ◽  
Variable Speed Drive ◽  
Software And Hardware ◽  
Discharge Pressure ◽  
Selection Of

This study implements the auto start control system on an electric motor 3 phase C4Feeding pump when the discharge pressure is low-low (4.3 kg /cm²). The C4 feeding pumpmotor was initially manually operated from the local control station, this was very ineffectiveand inefficient because it still relied on the field operator to operate the pump motor and whenthe plant was in normal operating it is very risk if the field operator late to operate motor then itwill impact to quality of the product, and if the delay time to operate motor is too long then planthave to shut down, therefore improvement is needed in the C4 feeding pump motor controlsystem. In this paper, various types of 3-phase motor control are explained which allow it to beapplied to the C4 feeding pump motor that are on-off, inverter, and variable speed drive andefficient selection of the three systems control of the motor. Software and hardware used in thisthesis work are DCS CENTUM VP Yokogawa.

Thomas More’s Correspondence in a Spanish Ambiance

Moreana ◽  
2002 ◽  
Vol 39 (Number 149) (1) ◽  
pp. 41-60 ◽  
Author(s):  
Eugenio M. Olivares Merino
Keyword(s):  
The Subject ◽  
Selection Of

The recent reprinting of Álvaro de Silva’s 1998 edition of a selection of More’s letters prompts the author to examine the subject of Spanish translations of More, and of de Silva’s general commentary on More’s correspondence and on his relationship to other humanists. The author reflects on aspects of More’s personality as exposed in his letters and uses what he finds as a corrective to several biographical misconceptions. He points out the strengths and weaknesses of de Silva’s work and compares it with that of other translators, particularly Elizabeth Rogers, and notes the particularly Spanish quality of de Silva’s edition.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Urban Areas ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature of urban areas. This study explored issue of measuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% of neighbourhoods' area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined. 

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of ◽  
Monotonic Relation

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature ofurban areas. This study explored issue ofmeasuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% ofneighbourhoods, area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined.

METHODS OF NETWORK COMMUNICATIVE COMPETENCE DEVELOPING WHEN PREPARING FUTURE TEACHERS FOR PROFESSIONAL ACTIVITIES IN THE ELECTRONIC EDUCATIONAL ENVIRONMENT

2020 ◽  
Vol 22 (12) ◽  
pp. 21-27
Author(s):  
Kostikova N.A.
Keyword(s):  
Teaching Practice ◽  
Communicative Competence ◽  
Educational Environment ◽  
Learning Technologies ◽  
Future Teachers ◽  
Electronic Information ◽  
Professional Activities ◽  
E Learning ◽  
Selection Of

Currently, in the context of the widespread use of e-learning technologies and distance educational technologies, it is necessary to train future teachers, taking into account the peculiarities of solving professional problems in an electronic information and educational environment, to develop students' relevant competencies, including network communicative competence. Despite the large number of studies devoted to the communicative aspect of the teacher's activities, the problem of the formation of network communicative competence in the electronic information and educational environment has not been sufficiently studied. Based on the analysis of scientific literature, the results of the questionnaire survey of students, some methods of forming network communicative competence in future teachers in the study of various disciplines, in the course of teaching practice, and scientific research are proposed. The analysis of the conditions and factors that determine the choice of methods for the formation of the specified competence has been carried out. These factors are associated with the teachers' perception of the peculiarities of communication in the electronic information and educational environment, the didactic and communicative potential of resources and tools of the electronic information and educational environment, the choice of methods and technologies for organizing interaction, the selection of educational material that allows the development of components of network communicative competence, the design of tasks and exercises for the development of network communicative competence, the choice of modes, schemes and forms of organization of interaction, the organization of feedback, control of the level of formation of the network communicative competence, the implementation of reflection. The formed network communicative competence will contribute to a more effective solution by the teacher of communicative tasks in the electronic information and educational environment, which will improve the quality of training of future teachers in the electronic information and educational environment.

Sign in / Sign up

Export Citation Format

Share Document