scholarly journals IMPACT ON THE APPLICATION OF INSULATION IN BUILDINGS TO ACHIEVE THERMAL COMFORT (A CASE STUDY: LAUSER OFFICE BUILDING IN BANDA ACEH)

2014 ◽  
Vol 3 (2) ◽  
pp. 94
Author(s):  
Nova Purnama Lisa ◽  
Zuraihan Zuraihan
Keyword(s):  
Solar Radiation ◽  
Thermal Comfort ◽  
Thermal Insulation ◽  
Building Materials ◽  
Office Building ◽  
Heat Radiation ◽  
Cooling Load ◽  
The Third ◽  
Simulation Results ◽  
The Impact

<p class="Keywords">From the results of research studies on the impact of the use of insulation in buildings, reducing solar radiation on buildings to improve indoor comfort by applying the Principles of radiation reduction in buildings naturally using insulation application that serves as an insulator against the building materials, use of thermal insulation in particular mounted on the roof of the building and the walls are located on second floor and the third floor Lauser office building, Calculate the cooling load for each room that was on second floor and the third floor based on the geographical location or position of the building, climate data, building material data , and the intensity of the spatial characteristics which include lighting, solar radiation, user activity and electrical appliances being used. The calculation is done with the help of Ecotech v.5, 2011. The location and position on the third floor of a building with a flat roof cast concrete, so that the heat absorbed by the platform, and two times greater than the amount of heat radiation is absorbed by the material in the direction of the light falling the sun is at an angle &lt;30°C. The simulation results on the building with the addition of thermal insulation on all walls and the roof of the inside of the foam material ultrafolmadehid, without changing the model building and similar activities in accordance with the existing condition and the condition of the room using the air conditioner at a temperature of 18-26°C, indicating a decrease in cooling load signifinikan in any space reaches 40% of the total cooling load required on the lauser office building. Comparing the simulation results Ecotech temperature v.5 2011 with field measurements as a validation of the simulation results in order to achieve thermal comfort in buildings and can menggurangi use energy consumption in buildings and can be used as a reference in planning space-based conditioning systems energy efficient.</p>

Implications of Building Material Choice on Outdoor Microclimate for Sustainable Built Environment

2015 ◽  
Vol 650 ◽  
pp. 82-90 ◽  
Author(s):  
D. Kannamma ◽  
A. Meenatchi Sundaram
Keyword(s):  
Thermal Comfort ◽  
Building Material ◽  
Building Materials ◽  
Climatic Factors ◽  
Outdoor Environment ◽  
Outdoor Thermal Comfort ◽  
Physical Factors ◽  
Physiological Equivalent Temperature ◽  
Material Choice ◽  
The Impact

The climatic conditions in a man-made urban environment may differ appreciably from those in the surrounding natural or rural environs.... each urban man-made buildings, roads, parking area, factories......creates around and above it a modified climate with which it interacts [1].Outdoor thermal comfort has gained importance in thermal comfort studies especially in tropical countries. In country like India, culturally the activities are spread both indoors and outdoors. Therefore the need for ambient outdoor environment gains importance. As there are many factors that contribute to outdoor thermal comfort (climatic factors and physical factors), this study aims in analyzing the impact of building material contribution, in an institutional courtyard. In order to understand the thermal contribution of various building materials and to suggest material choice to designers, ENVIMET is used for simulation purpose. The outdoor thermal comfort index employed in this study is PET (Physiological Equivalent Temperature), calibrated using RAYMAN.

scholarly journals The Impact of Aspect Ratio on External Heat Gain of Multi-storey Office Buildings in Jakarta

2018 ◽  
Vol 16 (1) ◽  
pp. 24-31
Author(s):  
Wasiska Iyati ◽  
◽  
Eryani Nurma Yulita ◽  
Jusuf Thojib ◽  
Heru Sufianto ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Building Design ◽  
Climatic Conditions ◽  
Building Envelope ◽  
External Heat ◽  
Office Buildings ◽  
Office Building ◽  
Cooling Load ◽  
Heat Gain ◽  
The Impact

The narrow land in big cities such as Jakarta, increases the amount of high rise building, especially multi-storey office building. Office building consumes much energy to provide air conditioning to meet the thermal comfort inside the building. On the other hand, the building shape, building envelope, and building orientation to the sun's position are the main factors in building design aspects that affect the amount of cooling load. This study aims to investigate the impact of the aspect ratio or the ratio of the longer dimension of an oblong plan to the shorter, on external heat gain of multi-storey office building. Variables examined include the transparent and solid area of building envelope, the total area of the surface of the building envelope in any orientation, and the volume of the building, as well as the influence of those proportion on the external heat gain. This study uses mathematical calculations to predict the cooling load of the building, particularly external heat gain through the walls, roof and glass, as well as comparative analysis of models studied. The study also aims to generate the design criteria of building form and proportion of multi-storey office buildings envelope with lower external heat gain. In Jakarta climatic conditions, the result on rectangular building plan with aspect ratio of 1 to 4 shows that the external heat gain did not differ significantly, and the smallest heat gain is found on the aspect ratio of 1.8. Results also showed that the greater aspect ratio, the greater reduction of external heat gain obtained by changing the orientation of the longest side facing east-west into the north-south, about 2.79% up to 42.14% on the aspect ratio of 1.1 to 4. In addition, it is known that in same building volume, changing the number of floors from 10 to 50 can improve the external heat gain almost twice.

scholarly journals Application of thermal comfort assessment models to indoor areas near glazed walls – experimental evaluation

2021 ◽  
Vol 20 (1) ◽  
pp. 106-127
Author(s):  
António Manuel Figueiredo Freitas Oliveira ◽  
◽  
Helena Corvacho ◽  
Keyword(s):  
Solar Radiation ◽  
Thermal Comfort ◽  
Thermal Environment ◽  
National Laboratory ◽  
Environmental Parameters ◽  
Outdoor Environment ◽  
Assessment Model ◽  
Indoor Space ◽  
The Impact ◽  
Indoor Spaces

In this paper, some of the results of an experimental study are presented. Its purpose was to better understand the impact of glazing on thermal comfort of users of indoor spaces (living and working), especially in the areas near glazed walls. Glazed elements, such as windows and glazed doors, allow visual access to the outdoor environment and the entrance of natural light and solar heat gains but they are often the cause of unwanted heat losses and gains and are disturbing elements in obtaining thermal comfort, both in global terms and in what concerns local discomfort due to radiant asymmetries and/or air draughts. Furthermore, solar radiation directly affecting users in the vicinity of glazing can also cause discomfort. These disturbances are recognized by users, both on cold winter days and on hot summer days. To assess thermal comfort or thermal neutrality of a person in a particular indoor space, it is important to know their location within that space. Thus, in order to adequately assess thermal comfort in the areas near the glazing, the indoor thermal environment must be characterized for this specific location. In this study, two indoor spaces (a classroom and an office-room) of a school building were monitored at different periods of the year. The measurements of the environmental parameters were performed both in the center of the rooms and in the areas near the glazing. Five models of thermal comfort assessment were then applied to the results, in order to compare the comfort conditions between the two studied locations and to evaluate the applicability of these models to the areas close to glazed walls. It was observed there was clearly a greater variability of comfort conditions in the vicinity of the glazed walls when compared to the center of the rooms. The application of thermal comfort assessment models to the two studied rooms was able to reveal the differences between the two compared locations within each space. It was also possible to show the effect of incoming solar radiation and the influence of the geometry of the spaces and of the ratio between glazed area and floor area by comparing the results for both spaces. The assessment model proposed by LNEC (Portuguese National Laboratory of Civil Engineering) proved to be the most adapted to Portuguese users’ habits.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

scholarly journals The Impact of Local Materials on the Improvement of the Thermal Comfort in Building

2020 ◽  
pp. 22-35
Author(s):  
Amadou Oumarou Fati ◽  
Bonkaney Abdou Latif ◽  
Ouedraogo Souleymane ◽  
S. M. Ky. Thierry ◽  
Mamadou Lewamy ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Energy Demand ◽  
Building Materials ◽  
Building Design ◽  
Temporal Variations ◽  
Raw Material ◽  
High Rise ◽  
Energy Demands ◽  
The Impact ◽  
Local Materials

The increasing energy demands in the building sector is considered as a main issue and has result both in the energy shortage and also environmental impact such as climate change and global warming. This demand is always increasing due to the high-rise level and also the need of thermal comfort. This paper aims to describe a passive approach to reduce the energy demand for a building through an improvement of the design of the thermal envelope. Within this work, we utilized the thermophysical properties of four building materials: three local materials (compressed earth, lateritic, and raw material) and one modern (Hollow cement) and an energy analysis of the building has been carried out. The numerical optimization of the building design has been performed dynamically by COMSOL Multiphysics software: case study of Ouagadougou and surface is 100m2. Also, the temporal variations in the inside of the room as well as the temperature of the walls and the ceiling with four different materials have been determined. The result shows that, for BLT, the maximum obtained around 22H is 308K, for Adobe it is 309K around 18H30, for BTC it was 309.2K at 20H and finally for cement block it is 310K around 18H. The mean average temperature of the building is low when we use local materials instead of modern one. Then, we conclude that, the use of local materials in the building design is an option for reducing the heat transfer into the room and at the energy consumption.

Potential of Cork Cement Composite as a Thermal Insulation Material

2015 ◽  
Vol 666 ◽  
pp. 17-29 ◽  
Author(s):  
Sukhdeo R. Karade
Keyword(s):  
Thermal Insulation ◽  
Building Materials ◽  
Environmental Concern ◽  
Cement Composite ◽  
Mineral Wool ◽  
Comfort Level ◽  
Environmental Benefits ◽  
Insulation Material ◽  
Thermal Insulating ◽  
The Impact

The growing environmental concern throughout the globe has led architects & engineers to design energy efficient buildings. Consequently, they are looking for building materials that can reduce the energy consumption in buildings to maintain the comfort level. Use of proper thermal insulating materials can reduce the energy required for heating or cooling of the buildings. Presently mineral wool and various foams are used for this purpose. Efforts are being made to use wastes in making thermal insulation materials so that the impact on environment can be further reduced. Cork granules are obtained as waste from the cork processing industries that make ‘bottle stoppers’ as a main product. These granules have a low density and could be used as lightweight aggregates for making concrete with low thermal conductivity. This article describes the physico-mechanical properties of lightweight cementitious composites made using cork granules. Further, environmental benefits of their application in thermal insulation of buildings has been discussed.

scholarly journals Improving the energy efficiency of an office building by applying a thermal comfort model

2021 ◽  
Vol 2069 (1) ◽  
pp. 012172
Author(s):  
G Kiki ◽  
P André ◽  
A Houngan ◽  
C Kouchadé
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Electrical Energy ◽  
Office Building ◽  
Tropical Regions ◽  
Comfort Index ◽  
The Hours ◽  
Air Conditioning Systems ◽  
Thermal Comfort Model ◽  
The Impact

Abstract The building represents one of the main actors of global warming of the planet because of the significant amounts of energy consumed. In Benin, 44,38% of electrical energy is consumed by office and service buildings. This is explained by the excessive use of air conditioning systems due to the lack of a thermal comfort index specific to the region. This work therefore focuses on assessing the impact of the choice of a thermal comfort model on the energy efficiency of buildings. For this purpose, an office building was chosen in the south of Benin and comfort surveys were conducted among the occupants. The model selected for this purpose is the adaptive model developed by López-Pérez and al. for air-conditioned buildings in humid tropical regions. Subsequently, a monitoring campaign of meteorological, hygrothermal and energetic data of the building was carried out during six months. The results obtained show that the average temperature of the offices (Tf ≈ 24°C) during the hours of occupancy is relatively lower than the comfort temperature determined with the model (Tc = 26.2°C). Moreover, the different simulations carried out under TRNSYS by substituting the office temperatures by the comfort temperature show a reduction of about 20% of the building’s energy consumption. This shows the importance of the comfort model of López-Pérez and al. in improving the energy efficiency of the building.

scholarly journals Study on Passive Ventilation and Cooling Strategies for Cold Lanes and Courtyard Houses—A Case Study of Rural Traditional Village in Shaanxi, China

2020 ◽  
Vol 12 (20) ◽  
pp. 8687
Author(s):  
Xingbo Yao ◽  
Bart J. Dewancker ◽  
Yuang Guo ◽  
Shuo Han ◽  
Juan Xu
Keyword(s):  
Energy Saving ◽  
Urban Areas ◽  
Cooling System ◽  
Thermal Conversion ◽  
Heat Radiation ◽  
Cooling Load ◽  
The Difference ◽  
Specific Implementation ◽  
Rural Residences ◽  
The Impact

China’s research on and specific implementation of energy saving for buildings are mainly concentrated in urban areas, but according to 2016 statistics, the rural population accounts for 42.65% of the total population, so rural housing has considerable energy-saving potential. However, the degree of attention to the energy consumption of rural houses needs to be improved. Regarding the research on and implementation of passive energy-saving strategies for residences, compared with centralized urban high-rise residences, rural residences mainly have independent courtyards, with a flexible layout and easier transformation. In this study, a system that uses the common cold lanes in traditional villages and buildings’ exterior walls was constructed, and the indoor spaces of courtyard buildings in southern Shaanxi were completely passively cooled in summer. This system can be completely separated from the supply of artificial energy by relying on the accumulation and buoyancy effects of air in patios and cold lanes and the hot-pressure ventilation in buildings to cool the buildings and greatly improve indoor ventilation efficiency. As the building is ventilated and cooled, the air wall formed in the system can effectively prevent direct contact between the outdoor and indoor temperatures and reduce the impact of thermal wall radiation on the interior. In previous studies on the passive design of courtyard houses, scholars considered the effect of thermal wall radiation on indoor temperature in simulations. Therefore, in this study, we also separately calculated whether to consider the difference between the situation with and without wall heat radiation (WHR) when simulating thermal conversion. The final results show that when the cooling system was adopted, the annual cooling load of the whole building was 4786.494 kW·h without WHR. However, with WHR, the cooling load reduction was 2989.128 kW·h, a difference of 1797.336 kW·h.

Sign in / Sign up

Export Citation Format

Share Document