scholarly journals Bioaccumulation of some Heavy Metals in Red mullet (Mullus barbatus) and Common pandora (Pagellus erythrinus) in Zliten Coast, Libya

2021 ◽  
Vol 13 (1) ◽  
pp. 91
Author(s):  
Keri Alhadi Ighwela ◽  
Ragab Farag Al-Kazaghly ◽  
Mohamed Hamid

Highlight Investigated in heavy metal bio-accumulation in red mullet (Mullus barbatus) and Common pandora (Pagellus erythrinus) collected in Zliten Coast, Libya.Based on the samples collected, the muscle tissue of fish species may be considered suitable for human consumption.The metal concentration levels observed were in range of acceptable limits proposed by regulations of WHO and FAO.AbstractThe current study aimed to determine the heavy metal concentration like as copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd) and mercury (Hg) in the liver, gills, gonad and muscles in two fish species (red mullet (Mullus barbatus), and common Pandora (Pagellus erythrinus) collected from the Zliten coast in Libya. The levels of heavy metals were determined by using an atomic absorption spectrophotometer (AAS). The results showed that the concentration of heavy metals in the sampled fishes less than the permissible limits for human consumption. In addition, the bioaccumulation for Cu, Pb, Cd, and Hg by both fish species was: liver >gills > gonads > muscles, while Zn follows the sequence: gonads > liver > gills > muscles. 

2019 ◽  
Vol 21 (1) ◽  
pp. 69-82
Author(s):  
Iyabode Olusola Taiwo ◽  
Olaniyi Alaba Olopade ◽  
Nathanael Akinsafe Bamidele

Abstract This research was undertaken to find out the levels of five heavy metals (Cu, Fe, Mn, Pb, and Zn) in the muscles of eight fish species from Epe Lagoon. The levels of heavy metals were determined by atomic absorption spectrophotometry after digestion of the samples using Kjldahl heating digester. The heavy metal concentrations among the fish species were statistically dissimilar (P < 0.5). The heavy metals of Pb, Fe, and Mn were above the FAO/WHO agreeable limits for human consumption.


2015 ◽  
Vol 26 (1) ◽  
pp. 20-26
Author(s):  
Lubomir Makedonski ◽  
Katya Peycheva ◽  
Mona Stancheva

Abstract Major part of healthy human diet consist of marine fish and seafood products. And it is not surprising that there are numerous studies based on metal accumulation in various fish species. Fish may also be used for heavy metal monitoring programs of marine environments due to their easy sampling, sample preparation and chemical analysis. Concentrations of lead, cadmium, nickel, copper, manganese, zinc, iron, chromium, total mercury and total arsenic were determined in edible part of two commercially valuable fish Greek aquaculture species European sea bass (Dicentrarchus labrax) and gilthead sea bream (Sparus aurata) purchased from Bulgarian market during 2011. The concentration of metals was measured by atomic absorption spectrophotometry (AAS). The concentration of the heavy metals in examined fish species ranged as follow: Pb 0.008 - 0.013; Cd 0.0017 - 0.022; Ni 0.007 - 0.012; Cu 0.054 - 0.115; Mn 0.043 - 0.09; Zn 0.14 - 0.15; Fe 0.17 - 0.19; Cr 0.05 - 0.07; Hg 0.11 - 0.13; As 1.6 - 1.8 mg kg-1 wet weight, respectively. The concentration of the heavy metals obtained from this study is compared with the results of a Black Sea bluefish (Pomatomus saltatrix) caught during the same year. The concentration of metals was significantly affected by the sampling site and fish species. Difference in the heavy metal concentration between European sea bass, gilthead sea bream is observed for Cu, Mn, Zn and Fe. Although, the heavy metals in the edible parts of the investigated fish were in the permissible safety levels for human uses.


Author(s):  
Özgür Canpolat ◽  
Metin Çalta

Keban Dam Lake is the second largest dam lake in Turkey. In addition, it has the feature of being one of the most important dam lakes in our country in terms of both aquaculture potential and electricity generation. In this study, fish samples belong to Capoeta trutta caught from Örencik region of Keban Dam Lake were used. The concentrations of some heavy metals (copper, iron, zinc, chromium, nickel, cadmium, arsenic and mercury) in muscle of Capoeta trutta and the potential health risk from consumption of this fish species were examined. In addidion, the relationship between the heavy metal levels and some biological aspects of fish (weight, length and sex) were determined. As a result of the study, it was determined that the most and the least accumulated heavy metals in the muscle tissue of Capoeta trutta were zinc and cadmium respectively. The concentration of heavy metals showed differences according to weight, length and sex of fish. The results were found indicated that heavy metal levels in the muscle tissue of Capoeta trutta are below the tolerable values recommended by EPA, WHO and FAO. Therefore, there is not any risk for human consumption of this fish species.


Author(s):  
Audronė Mikalajunė ◽  
Lina Jakučionytė

Vehicles release large amounts of heavy metals to the environment. There have been done a lot of investigations analysing the distribution of heavy metals in soils near intensive regional roads. However, there is lack of investigations into the impact of small-intensity gravel roads on roadside soil contamination with heavy metals. The object of this investigation is four gravel roads of local significance connecting small villages. The intensity of these roads is very low. The gravel roads are chosen according to application of dust-minimizing materials, for example, CaCl2 and oil emulsion. According to our results, none of the soil samples had an excess of heavy metal concentration limit. Besides, heavy metal concentrations were decreasing with a distance from the road increasing. We can make an assumption that road dust-minimizing materials do not have a significant impact on heavy metal distribution in roadside soils. The major factors of heavy metal pollution distribution in roadside soils are traffic intensity, roadside trenches, and topographic conditions. Santrauka Eksploatuojant autotransportą, į aplinką patenka daug sunkiųjų metalų. Atlikta nemažai tyrimų sunkiųjų metalų paplitimuidirvožemyje šalia intensyvių magistralinių kelių nustatyti, tačiau mažo intensyvumo keliai šiuo požiūriu tiriami mažai.Tirti pasirinkta 4 žvyrkeliai – vietinės reikšmvs keliai, jungiantys nedideles gyvenvietes. Eismo intensyvumas šiuose keliuose mažas. Žvyrkeliai pasirinkti pagal taikomas priemones dulkėtumui mažinti, t. y. du nagrinvjami žvyrkeliai apdorotiCaCl2, kiti du – naftos emulsija. Nė viename mėginyje sunkiųjų metalų koncentracijos neviršijo DLK, o tolstant nuo važiuojamosios kelio dalies sunkiųjų metalų koncentracijos buvo mažesnės. Galima daryti prielaidą, kad kelio apdorojimo medžiagos dulkėtumui mažinti žymios įtakos sunkiųjų metalų pasiskirstymui pakelių dirvožemyje nedaro, lemia transporto srauto intensyvumas, kelio grioviai pakelėse bei reljefo sąlygos. Резюме При эксплуатации автомобилей в окружающую среду попадает много тяжелых металлов. Проведено немалоисследований, посвященных анализу распространения тяжелых металлов в почве обочин интенсивно эксплуатируемых магистральных дорог, однако исследований, касающихся аналогичных проблем дорог малой интенсивности, в настоящее время имеется немного. В настоящей работе в качестве объекта исследований выбраны четыредороги местного значения с гравийным покрытием, соединяющие небольшие поселения. Интенсивность дорог небольшая. Гравийные дороги выбраны с учетом их обработки для уменьшения пыльности – две дороги обработаны с применением CaCl2, а две другие – с применением нефтяной эмульсии. Ни в одной пробе не былозафиксировано концентраций тяжелых металлов, превышающих допустимые нормами. С удалением от проезжей части концентрации тяжелых металлов уменьшались. На основании исследований можно сделать вывод о том,что материалы, применявшиеся для уменьшения пыльности дорог, большого влияния на распространениетяжелых металлов в почве обочин дорог не оказывают. На распространение тяжелых металлов в почве обочин оказывает влияние интенсивность транспортного потока, кюветы на обочинах и условия рельефа.


2016 ◽  
Vol 31 (4) ◽  
Author(s):  
Sock Yin Tan ◽  
Sarva Mangala Praveena ◽  
Emilia Zainal Abidin ◽  
Manraj Singh Cheema

AbstractIndoor dust acts as a media for heavy metal deposition. Past studies have shown that heavy metal concentration in indoor dust is affected by local human activities and atmospheric transport can have harmful effects on human health. Additionally, children are more sensitive to heavy metals due to their hand-to-mouth behaviour and rapid body development. However, limited information on health risks were found in past dust studies as these studies aimed to identify heavy metal concentrations and sources of indoor dust. The objective of this review is to discuss heavy metal concentration and sources influencing its concentration in indoor dust. Accordingly, high lead (Pb) concentration (639.10 μg/g) has been reported in heavy traffic areas. In addition, this review paper aims to estimate the health risk to children from heavy metals in indoor dust via multiple exposure pathways using the health-risk assessment (HRA). Urban areas and industrial sites have revealed high heavy metal concentration in comparison to rural areas. Hazard index (HI) values found in arsenic (As), chromium (Cr) and Pb were 21.30, 1.10 and 2.40, respectively, indicate that non-carcinogenic elements are found in children. Furthermore, most of the past studies have found that carcinogenic risks for As, cadmium (Cd), Cr and Pb were below the acceptable total lifetime cancer risk (TLCR) range (1×10


2014 ◽  
Vol 8 (7) ◽  
pp. 422-427
Author(s):  
A. A. Ayeloja, ◽  
F. O. A. George, ◽  
A. Y. Shorinmade, ◽  
W. A. Jimoh, ◽  
Q. O. Afolabi, ◽  
...  

2017 ◽  
Vol 2 (3) ◽  
pp. 156
Author(s):  
S.A. Bhutada ◽  
S.B. Dahikar

At present various microorganisms are used for bioremediation of heavy metals from soil and water bodies. The aim of present work was to isolate the potential heavy metal degrading organisms and to apply for bioremediation of heavy metals from the domestic as well as industrial waste. The study involves the isolation of the bacterial species residing the natural habitat of such environments and screening of these isolates to degrade different heavy metals such as Cu, Cd, Hg, Ni, and Zn  up to the concentration 2000 ppm. There were six bacterial potential isolates  found namely Pseudomonas spp., (3), Achromobacter spp., Uncultured Microbacterium spp., and Exigoubacterium spp., which showing the growth up to the concentration of 2000 ppm. The potency of the six potential isolates was determined by using the conventional plate count technique.  The percentage removal of analyzed by the use of ICP-AES technique. The study shows isolation of the species which can remove heavy metal up to 60%. It was also found that the increase in the incubation time causes more reduction in the heavy metal concentration. The mutational analysis of the isolates for the strain improvement process shows that the Exigoubacterium species can grow at 3000 ppm heavy metal concentration and showed 60% reduction in heavy metal. This highly potential species can be used for the removal of different heavy metals which is also a viable, eco friendly and cost effective technology for cleanup of the environment. 


Baltica ◽  
2019 ◽  
Vol 32 (1) ◽  
pp. 51-62
Author(s):  
Alexander Krek ◽  
Aleksandr Danchenkov ◽  
Marina Ulyanova ◽  
Darya Ryabchuk

The scope of the study was to assess the impact of potential sources of Cu, Zn, Co, Ni, and Cr on bottom sediments of the Russian sector of the south-eastern Baltic Sea. A total of 68 samples were taken and analyzed for grain-size (laser diffraction and sieve method) and heavy metal concentration (atomic absorption spectroscopy method). To avoid the influence of the sorption capacity of the fine-grained sediments to accumulate the pollutants, the normalization of the heavy metal concentration to Fe was applied. The environmental indices (contamination factor and modified degree of contamination) were calculated. The research has shown the contribution of oil platform, pipelines, ports and wastewater treatment facilities on the geochemical composition of bottom sediments. The authors have identified the level of heavy metals contamination of the middle parts of the Curonian and Vistula spits as a result of alongshore transport of pollutants.


Author(s):  
Nachana’a Timothy

Heavy metal concentration in roadside soil and plants are increasingly becoming of health concern. This work determined the concentration of selected heavy metals (Cd, Pb, Zn, Cr, Fe, Mg, Mn, Co, Ni and Cu) in roadside soils and plants samples from selected sites (Plaifu, Shiwa, Fadama-rake and Damdrai) along major road in Hong. Soil samples were taken 10 m, 20 m and 30 m away from the edge of the road at the  depth of 0-10 cm, 10-20 cm and 20-30 cm. Plant samples were randomly collected within the vicinity where the soil samples were taken and were analysed using Atomic Absorption Spectrophotometer. The result revealed the trend in soil heavy metal concentration was Fe > Mn > Mg > Pb > Zn > Ni > Co > Cu > Cr > Cd and for plant the trend was Fe > Mn > Mg > Zn > Pb > Ni > Cu > Cd > Co > Cr. The concentrations decreased with increasing distance away from the edge of the road as well as with depth at which the soil sample were taken. The transfer factor showed that the concentration of Zn, Mn, Cu and Mg were greater than 1, which shows that plant were enriched by Zn, Mn, Cu and Mg from the soil. Mg and Cd equal to 1 at Plaifu and Damdrai. Most of the values of TF at the study area super pass 0.5, which implies that generally, the ability of bioaccumulation of these heavy metals in examined plants were relatively high.


2021 ◽  
Vol 11 (11) ◽  
Author(s):  
Satyam Srivastava ◽  
Vinay Sharma

AbstractHeavy metals are very toxic and hazardous for human health. Onsite screening of heavy metal contaminated samples along with location-based automation data collection is a tedious job. Traditionally high-end equipment’s such as gas chromatography mass spectrometer (GC–MS) and atomic absorption spectrometers have been used to measure the concentration of different heavy metals in water samples but most of them are costly, bulky, and time consuming, and requires expert human intervention. This manuscript reports an ultra-portable, rapid, cost-effective, and easy-to-use solution for onsite heavy metal concentration measurement in drinking water samples. Presented solution combines off-the-shelf available chemical kits for heavy metal detection and developed spectrometer-based readout for concentration prediction, quality judgment, and automatic data collection. Two chemical kits for copper and iron detection have been imported form Merck and have been used for overall training and testing. The developed spectrometer has capability to work with smartphone-based android app and also can work in standalone mode. The developed spectrometer uses white light-emitting diode as a source and commercially imported spectral sensor (AS7262) for visible radiation reception. A low-power sub-GHZ-based wireless embedded platform has been developed and interfaced with source and detector. A power management module also has been designed to monitor the battery status and also to generate low battery indication. Overall modules has been packaged in custom designed enclosure to avoid external light interference. The developed system has been trained using standard buffer samples with known heavy metal concentrations and further tested for water samples collected from institute colony and nearby villages. The obtained results have been validated with commercially imported system from HANNA instruments, and it has been observed that developed system has shown excellent accuracy to predict heavy metal concentration (tested for Fe and Cu) in water samples.


Sign in / Sign up

Export Citation Format

Share Document