scholarly journals Analysis Of Rat Platelet Count After Electrical Exposure In Acute And Subacute Phase Of Burn Injury

2021 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Fransiska Nooril F P H ◽  
Ulfa Elfiah ◽  
Laksmi Indreswari ◽  
Desie Dwi Wisudanti
Keyword(s):  
Platelet Count ◽  
Burn Injury ◽  
Control Group ◽  
Subacute Phase ◽  
Severe Burns ◽  
Platelet Number ◽  
Important Health ◽  
Electrical Burns ◽  
Post Hoc ◽  
Health Burdens

Electrical burns are one of the causes of important health burdens throughout the world with incidences varying between 4 – 18% of all burns. In electrical burns, blood vessels are the heavily damaged tissue characterized by endothelial erosion, followed by adhesion and aggregation of platelet to form hemostatic plug. The screening test for assesing the formation of a hemostatic plug is platelet count. Platelet count monitoring is very important during the resuscitation phase and treatment periods in severe burns, namely in acute and subacute phase of burns. The purpose of this study is to determine and to analyze about the changes in platelet count of rat after electrical exposure in acute and subacute phase of burns. The control group in this study was not given electrical exposure and rat’s blood was taken directly after the adaptation process. In the other five groups, P1, P2, P3, P4 and P5 were exposed to 140 V for 17 seconds, then their blood was taken for platelet counts on days 0, 3, 7, 10 and 14 post-exposure. The result of this study based on Post Hoc LSD test showed that there was a change of platelet platelet number after exposure in acute phase of burn injury and there was no change of platelet platelet number after exposure in burning subacute phase.

scholarly journals Management of Electrocuted Major Burns in District Hospital

2019 ◽  
Vol 18 (1) ◽  
Author(s):  
Kah Seng Khoo ◽  
Qi Wen Leong ◽  
Choon Aik Ho ◽  
Chen Hong Lim
Keyword(s):  
District Hospital ◽  
Total Body Surface Area ◽  
Hospital Setting ◽  
Surgical Team ◽  
The World ◽  
Burn Unit ◽  
Important Health ◽  
Total Body ◽  
Electrical Burns ◽  
Health Burdens

Electrical burns are one of the important health burdens throughout the world with incidences varying between 4–18% of all burns. We are presenting a case of 45-year-old gentleman whom sustained a high voltage electrical injury (railway voltage) with 25% total body surface area (TBSA) of mixed partial burns over the path of current. He was managed primarily by general surgical team in a district hospital. Subsequently, he was discharged home well after 23 days of hospitalization. In this article, we discuss about management of electrocuted burns in district hospital setting without burn unit.

Acute and Chronic Changes in Platelet Volume and Count After Cardiopulmonary Bypass Induced Thrombocytopenia in Man

1987 ◽  
Vol 57 (01) ◽  
pp. 55-58 ◽  
Author(s):  
J F Martin ◽  
T D Daniel ◽  
E A Trowbridge
Keyword(s):  
Platelet Count ◽  
Mean Platelet Volume ◽  
Artery Bypass ◽  
Bypass Graft ◽  
Control Group ◽  
Artery Bypass Graft ◽  
Platelet Volume ◽  
Young Males ◽  
The Mean

SummaryPatients undergoing surgery for coronary artery bypass graft or heart valve replacement had their platelet count and mean volume measured pre-operatively, immediately post-operatively and serially for up to 48 days after the surgical procedure. The mean pre-operative platelet count of 1.95 ± 0.11 × 1011/1 (n = 26) fell significantly to 1.35 ± 0.09 × 1011/1 immediately post-operatively (p <0.001) (n = 22), without a significant alteration in the mean platelet volume. The average platelet count rose to a maximum of 5.07 ± 0.66 × 1011/1 between days 14 and 17 after surgery while the average mean platelet volume fell from preparative and post-operative values of 7.25 ± 0.14 and 7.20 ± 0.14 fl respectively to a minimum of 6.16 ± 0.16 fl by day 20. Seven patients were followed for 32 days or longer after the operation. By this time they had achieved steady state thrombopoiesis and their average platelet count was 2.44 ± 0.33 × 1011/1, significantly higher than the pre-operative value (p <0.05), while their average mean platelet volume was 6.63 ± 0.21 fl, significantly lower than before surgery (p <0.001). The pre-operative values for the platelet volume and counts of these patients were significantly different from a control group of 32 young males, while the chronic post-operative values were not. These long term changes in platelet volume and count may reflect changes in the thrombopoietic control system secondary to the corrective surgery.

Changes in Platelet Aggregability after Ovariectomy

1979 ◽  
Vol 42 (04) ◽  
pp. 1332-1339 ◽  
Author(s):  
Hiroh Yamazaki ◽  
Takeshi Motomiya ◽  
Minoru Sonoda ◽  
Noboru Miyagawa
Keyword(s):  
Platelet Count ◽  
Platelet Activation ◽  
Ovarian Hormones ◽  
Control Group ◽  
Platelet Aggregability ◽  
Appearance Rate ◽  
Before And After ◽  
The Difference ◽  
Induced Aggregation ◽  
Observation Period

SummaryChanges in platelets in 48 patients with uterine myoma before and after hysterectomy with and without ovariectomy were examined. Bilateral ovariectomy in 25 cases (ovariec-tomized group) and unilateral or non-ovariectomy in 23 cases (control group) were performed at the hysterectomy. Platelet count and an appearance rate of secondary aggregation decreased at one day after and increased at one week after the operation, similarly in both the ovariectomized and the control group. The appearance rate of secondary aggregation was reflected in an intensity of aggregation at 5 min after the addition of reagent to PRP. At one month after the operation, the appearance rate of secondary aggregation induced by 3 μM ADP showed a statistically significant decrease in comparison with the preoperation value (P <0.05) and the enhancement of 5-min aggregation was still observed in the control group, while ceased in the ovariectomized group. The difference between the two groups was significant (P < 0.05). There was almost no change in the speed and intensity of primary and secondary aggregation during the observation period. No significant differences in collagen-induced aggregation were noted between the two groups. The results suggest that ovarian hormones, mainly estrogen, facilitate platelet activation which is mediated by the so-called secondary aggregation.

Clinical Impact of Co-medication of Levetiracetam and Clobazam with Proton Pump Inhibitors: A Drug Interaction Study

2020 ◽  
Vol 21 (2) ◽  
pp. 126-131
Author(s):  
Bhuvanachandra Pasupuleti ◽  
Vamshikrishna Gone ◽  
Ravali Baddam ◽  
Raj Kumar Venisetty ◽  
Om Prakash Prasad
Keyword(s):  
Plasma Concentration ◽  
Proton Pump Inhibitors ◽  
Proton Pump ◽  
Plasma Concentrations ◽  
Control Group ◽  
Drug Concentrations ◽  
Significant Difference ◽  
Post Hoc ◽  
Hydrolysis Of ◽  
Cytochrome P 450

Background: Clobazam (CLBZ) metabolized primarily by Cytochrome P-450 isoenzyme CYP3A4 than with CYP2C19, Whereas Levetiracetam (LEV) is metabolized by hydrolysis of the acetamide group. Few CYP enzymes are inhibited by Proton Pump Inhibitors (PPIs) Pantoprazole, Esomeprazole, and Rabeprazole in different extents that could affect drug concentrations in blood. The aim of the present study was to evaluate the effect of these PPIs on the plasma concentrations of LEV and CLBZ. Methods: Blood samples from 542 patients were included out of which 343 were male and 199 were female patients and were categorized as control and test. Plasma samples analyzed using an HPLC-UV method. Plasma concentrations were measured and compared to those treated and those not treated with PPIs. One way ANOVA and games Howell post hoc test used by SPSS 20 software. Results: CLBZ concentrations were significantly 10 folds higher in patients treated with Pantoprazole (P=0.000) and 07 folds higher in patients treated with Esmoprazole and Rabeprazole (P=0.00). Whereas plasma concentration of LEV control group has no statistical and significant difference when compared to pantoprazole (P=0.546) and with rabeprazole and esomeprazole was P=0.999. Conclusion: The effect of comedication with PPIs on the plasma concentration of clobazam is more pronounced for pantoprazole to a greater extent when compared to esomeprazole and rabeprazole. When pantoprazole is used in combination with clobazam, dose reduction of clobazam should be considered, or significance of PPIs is seen to avoid adverse effects.

scholarly journals Effect of a Multidomain Lifestyle Intervention on Estimated Dementia Risk

2021 ◽  
pp. 1-6
Author(s):  
Alina Solomon ◽  
Ron Handels ◽  
Anders Wimo ◽  
Riitta Antikainen ◽  
Tiina Laatikainen ◽  
...  
Keyword(s):  
Lifestyle Intervention ◽  
Intervention Study ◽  
Controlled Trial ◽  
Control Group ◽  
Post Hoc Analysis ◽  
Randomized Controlled ◽  
Dementia Risk ◽  
Geriatric Intervention ◽  
Prevention Potential ◽  
Post Hoc

We investigated the effect of a multidomain lifestyle intervention on the risk of dementia estimated using the validated CAIDE risk score (post-hoc analysis). The Finnish Geriatric Intervention Study to Prevent Cognitive Impairment and Disability (FINGER) is a 2-year randomized controlled trial among 1,260 at-risk older adults (60–77 years). Difference in the estimated mean change in CAIDE score at 2 years in the intervention compared to the control group was –0.16 (95 %CI –0.31 to 0.00) (p = 0.013), corresponding to a relative dementia risk reduction between 6.04–6.50%. This could be interpreted as a reflection of the prevention potential of the intervention.

scholarly journals Potential of different fluoride gels to prevent erosive tooth wear caused by gastroesophageal reflux

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Philipp Körner ◽  
Luca Georgis ◽  
Daniel B. Wiedemeier ◽  
Thomas Attin ◽  
Florian J. Wegehaupt
Keyword(s):  
Gastroesophageal Reflux ◽  
Artificial Saliva ◽  
In Vitro Study ◽  
Tooth Wear ◽  
Control Group ◽  
Erosive Tooth Wear ◽  
Custom Made ◽  
Post Hoc ◽  
Bovine Enamel

Abstract Background This in-vitro-study aimed to evaluate the potential of different fluoride gels to prevent gastroesophageal reflux induced erosive tooth wear. Methods Surface baseline profiles of a total of 50 bovine enamel specimens [randomly assigned to five groups (G1–5)] were recorded. All specimens were positioned in a custom made artificial oral cavity and perfused with artificial saliva (0.5 ml/min). Reflux was simulated 11 times a day during 12 h by adding HCl (pH 3.0) for 30 s (flow rate 2 ml/min). During the remaining 12 h (overnight), specimens were stored in artificial saliva and brushed twice a day (morning and evening) with a toothbrush and toothpaste slurry (15 brushing strokes). While specimens in the control group (G1) did not receive any further treatment, specimens in G2–5 were coated with different fluoride gels [Elmex Gelée (G2); Paro Amin Fluor Gelée (G3); Paro Fluor Gelée Natriumfluorid (G4); Sensodyne ProSchmelz Fluorid Gelée (G5)] in the evening for 30 s. After 20 days, surface profiles were recorded again and enamel loss was determined by comparing them with the baseline profiles. The results were statistically analysed using one-way analysis of variance (ANOVA) followed by Tukey`s HSD post-hoc test. Results The overall highest mean wear of enamel (9.88 ± 1.73 µm) was observed in the control group (G1), where no fluoride gel was applied. It was significantly higher (p < 0.001) compared to all other groups. G2 (5.03 ± 1.43 µm), G3 (5.47 ± 0.63 µm, p = 0.918) and G4 (5.14 ± 0.82 µm, p > 0.999) showed the overall best protection from hydrochloric acid induced erosion. Enamel wear in G5 (6.64 ± 0.86 µm) was significantly higher compared to G2 (p = 0.028) and G4 (p = 0.047). Conclusions After 20 days of daily application, all investigated fluoride gels are able to significantly reduce gastroesophageal reflux induced loss of enamel.

Assessing reinforcing versus aversive consequences in a real-time secondhand smoke intervention

2021 ◽  
Author(s):  
Vincent Berardi ◽  
John Bellettiere ◽  
Benjamin Nguyen ◽  
Neil E Klepeis ◽  
Suzanne C Hughes ◽  
...  
Keyword(s):  
Real Time ◽  
Real World ◽  
Secondhand Smoke ◽  
Relative Effectiveness ◽  
Feedback System ◽  
Control Group ◽  
Sensing Technology ◽  
Control Versus ◽  
Particle Counts ◽  
Post Hoc

Abstract Few studies have examined the relative effectiveness of reinforcing versus aversive consequences at changing behavior in real-world environments. Real-time sensing devices makes it easier to investigate such questions, offering the potential to improve both intervention outcomes and theory. This research aims to describe the development of a real-time, operant theory-based secondhand smoke (SHS) intervention and compare the efficacy of aversive versus aversive plus reinforcement contingency systems. Indoor air particle monitors were placed in the households of 253 smokers for approximately three months. Participants were assigned to a measurement-only control group (N = 129) or one of the following groups: 1.) aversive only (AO, N = 71), with aversive audio/visual consequences triggered by the detection of elevated air particle measurements, or 2.) aversive plus reinforcement (AP, N = 53), with reinforcing consequences contingent on the absence of SHS added to the AO intervention. Residualized change ANCOVA analysis compared particle concentrations over time and across groups. Post-hoc pairwise comparisons were also performed. After controlling for Baseline, Post-Baseline daily particle counts (F = 6.42, p = 0.002), % of time &gt;15,000 counts (F = 7.72, p &lt; 0.001), and daily particle events (F = 4.04, p = 0.02) significantly differed by study group. Nearly all control versus AO/AP pair-wise comparisons were statistically significant. No significant differences were found for AO versus AP groups. The aversive feedback system reduced SHS, but adding reinforcing consequences did not further improve outcomes. The complexity of real-world environments requires the nuances of these two contingency systems continue to be explored, with this study demonstrating that real-time sensing technology can serve as a platform for such research.

scholarly journals Biomechanical properties of the bone during implant placement

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Ádám László Nagy ◽  
Zsolt Tóth ◽  
Tamás Tarjányi ◽  
Nándor Tamás Práger ◽  
Zoltán Lajos Baráth
Keyword(s):  
Bone Structure ◽  
Biomechanical Properties ◽  
Control Group ◽  
Dynamic Tests ◽  
Bone Model ◽  
Implant Placement ◽  
Significant Difference ◽  
Before And After ◽  
Group 2 ◽  
Post Hoc

Abstract Background In this research the biomechanical properties of a bone model was examined. Porcine ribs are used as experimental model. The objective of this research was to investigate and compare the biomechanical properties of the bone model before and after implant placement. Methods The bone samples were divided in three groups, Group 1 where ALL-ON-FOUR protocol was used during pre-drilling and placing the implants, Group 2 where ALL-ON-FOUR protocol was used during pre-drilling, and implants were not placed, and Group 3 consisting of intact bones served as a control group. Static and dynamic loading was applied for examining the model samples. Kruskal–Wallis statistical test and as a post-hoc test Mann–Whitney U test was performed to analyze experimental results. Results According to the results of the static loading, there was no significant difference between the implanted and original ribs, however, the toughness values of the bones decreased largely on account of predrilling the bones. The analysis of dynamic fatigue measurements by Kruskal–Wallis test showed significant differences between the intact and predrilled bones. Conclusion The pre-drilled bone was much weaker in both static and dynamic tests than the natural or implanted specimens. According to the results of the dynamic tests and after a certain loading cycle the implanted samples behaved the same way as the control samples, which suggests that implantation have stabilized the skeletal bone structure.

Does a Self-etching Ceramic Primer Improve Bonding to Lithium Disilicate Ceramics? Bond Strengths and FESEM Analyses

2019 ◽  
Vol 44 (2) ◽  
pp. 210-218 ◽  
Author(s):  
GC Lopes ◽  
J Perdigão ◽  
D Baptista ◽  
A Ballarin
Keyword(s):  
Failure Mode ◽  
Lithium Disilicate ◽  
Resin Cement ◽  
Control Group ◽  
Shear Mode ◽  
Bond Strengths ◽  
Post Hoc ◽  
Microshear Bond Strength ◽  
And Control ◽  
Silane Solution

SUMMARY Objective: To compare the effect of hydrofluoric acid (HF) vs self-etching ceramic primer on resin cement microshear bond strength (μSBS) and ultramorphology of lithium disilicate (LD) ceramic. Methods and Materials: LD (IPS e.max CAD, Ivoclar Vivadent) blocks (14×4×2 mm3) were polished to 1200 grit and assigned to nine groups (n=5): CON: control, no LD surface treatment; IVO: 5.0% HF (IPS Ceramic Etching Gel, Ivoclar Vivadent); VIT: 5.0% HF (Vita Ceramics Etch, VITA Zahnfabrik); FGM: 5.0% HF (Condac Porcelana, FGM); ULT: 9.0% HF (Porcelain Etch, Ultradent); PRM: 9.6% HF (Premier Porcelain Etch Gel, Premier); BIS: 9.5% HF (Porcelain Etchant, Bisco Inc); DEN: 10.0% HF (Condicionador de Porcelanas, Dentsply Brazil); and MEP: self-etching ceramic primer (Monobond Etch & Prime, Ivoclar Vivadent). For all HF groups and control, an MDP-containing silane solution (MB+, Monobond Plus, Ivoclar Vivadent) was applied on rinsing the HF gel and air drying. Three transparent matrices for each specimen were filled with light-cured resin cement (Variolink Veneer, Ivoclar Vivadent). After storage in water for 48 hours at 37°C, specimens were tested in shear mode to measure μSBS. Mode of failure was analyzed at 50×. Statistical analysis included one-way analysis of variance and the Duncan post hoc test (α=0.05). Thirty-six additional LD specimens were assigned to the same experimental groups (n=4) and observed under a field-emission scanning electron microscope (FESEM) at magnifications ranging from 10,000× to 100,000×. Results: IVO resulted in statistically higher mean μSBS than all the other groups. MEP resulted in statistically lower μSBS than all HF groups. The failure mode for MEP was predominantly adhesive. The most frequent failure mode for the HF groups was mixed. CON resulted in 100% pretesting failures. For FESEM, no retentive pattern was observed for CON specimens. MEP resulted in the least pronounced etching pattern, few areas around crystals exhibited a slight increase in retention pattern compared to the control group. All HF gels created microporosities on the LD surface with distinct etching patterns. VIT and DEN resulted in an LD ultramorphology that suggested overetching. Conclusions: HF etching followed by a silane solution resulted in higher bond strengths than a self-etching ceramic primer. Some HF gels may cause overetching of the LD intaglio surface.

A Novel Approach to the Assessment of Variations in the Human Platelet Count

2000 ◽  
Vol 83 (03) ◽  
pp. 480-484 ◽  
Author(s):  
John James ◽  
Dianne Brown ◽  
Gordon Whyte ◽  
Mark Dean ◽  
Colin Chesterman ◽  
...  
Keyword(s):  
Platelet Count ◽  
Seasonal Variation ◽  
Individual Variation ◽  
Human Platelet ◽  
First Report ◽  
Platelet Counts ◽  
Novel Approach ◽  
Platelet Number ◽  
Genetically Determined

SummaryThis is the first report of a method to assess the significance of numerical changes in the platelet count based upon a result exceeding the normal intra-individual variation in platelet numbers. Serial platelet counts from 3,789 subjects were analysed to determine the intra-individual variation in platelet numbers. A platelet count difference of 98 × 109/L in males was found to represent a change that would occur by chance in less than 1 in 1,000 platelet count determinations. Tables to determine the significance of platelet number variations, given N previous observations, are provided at two probability levels. The repeatability of the platelet count was calculated as 0.871 (males) and 0.849 (females) indicating that the heritability of platelet count is high and that the platelet count is predominantly genetically determined. A seasonal variation in platelet count was found with a ‘winter’ versus ‘summer’ difference of 5.10 × 109/L (males) and 5.82 × 109/L (females).

Sign in / Sign up

Export Citation Format

Share Document