scholarly journals PENURUNAN KONSENTRASI WARNA LIMBAH CAIR SASIRANGAN MENGGUNAKAN ADSORBENlLIMBAH PADAT. LUMPUR-AKTIF TERAKTIVASI INDUSTRI KARET

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Riza Miftahul Khair ◽  
Nopi Stiyati Prihatini ◽  
Apriani Apriani ◽  
Vita Pramaningsih
Keyword(s):  
Activated Sludge ◽  
Industrial Wastewater ◽  
Adsorption Process ◽  
Ph Value ◽  
Aquatic Organisms ◽  
Textile Wastewater ◽  
Operating Conditions ◽  
Waste Activated Sludge ◽  
High Concentration ◽  
Industrial Sludge

Limbah cair sasirangan memiliki tingkat pencemaran yangktinggi dan belummmemenuhi standar untuk dibuang ke lingkungan, sehingga harus dilakukan pengolahan terlebih dahulu. Pembuangan air limbah industri tekstilkke lingkungan tanpa adanya proses pengolahan dapat merusak ekosistem dan menjadi racun bagi organisme air, bahkan beberapa jenis pewarnaadiduga bersifat karsinogen dan membahayakankkesehatan manusia. Metode yang dapat digunakan untuk menurunkankkonsentrasi warna pada airllimbah, salah satunya adalah proses adsorpsi. Salah satu jenis adsorben yang sering digunakan dalam pengolahan air limbah serta dinilai sangattcocok untuk mengurangi zat organik dan warna yaitu karbon aktif. Pada penelitian ini dilakukan analisis penurunan konsentrasi warna limbah cair industri sasirangan menggunakan adsorben yang terbuat dari limbah padat lumpur-aktif.industri karet berbentuk bubuk (powder), denganaaktivasi adsorben menggunakan KOH. Hasil karakteristik limbah cair sasirangan Kampung Sasirangan Banjarmasin yaitu memiliki konsentrasi warna, BOD dan COD yang tinggi, memiliki nilai pH basa yaitu 11 serta konsentrasi logam Cr, Cu dan Cd yang sesuai dengan baku mutu. Sedangkan untuk kondisi operasi terbaik dalam proses adsorpsi warna menggunakan adsorben limbah lumpur–aktif karet adalah pada pH 3, dosis 9 g/L dan waktukkontak 150 menit (2,5 jam) dengannkapasitas adsorpsi 675,7 Pt.Co/g. Kata Kunci: Adsorpsi, limbah lumpur aktif, sasirangan, warna. ABSTRACT  Sasirangan textile wastewater has high pollutant power and has not met the requirements to be disposed of into the environment, so it must be treated first. The disposal of textile industrial wastewater to the environment without going through the processing process can damage the ecosystem and become toxic to aquatic organisms, even some types of dyes are thought to be carcinogens and endanger human health. One of the methods that can be used to reduce the color concentration in wastewater is the adsorption process. One type of adsorbent that is commonly used in wastewater treatment and is considered very suitable for reducing organic matter and color is activated carbon. In this study, an analysis of the decrease in the color concentration of the sasirangan industrial wastewater was carried out using an adsorbent made of powdered solid waste of activated rubber industrial sludge with adsorbent activation using KOH. The results of the characteristics of the Sasirangan wastewater in Sasirangan Village, Banjarmasin, namely having a high concentration of color, BOD and COD, having an alkaline pH value of 11 and concentrations of Cr, Cu and Cd metals in accordance with quality standards. As for the best operating conditions in the color adsorption process using waste activated sludge rubber adsorbent is at a pH of 3, a dose of 9 g / L and a contact time of 150 minutes (2.5 hours) with an adsorption capacity of 675.7 Pt.Co/g.  Keywords: Adsorption, colour, sasirangan, waste activated sludge.

Acidification of Waste Activated Sludge during Mesophilic Phase in Two Phases Anaerobic Digestion System

2012 ◽  
Vol 610-613 ◽  
pp. 2416-2420 ◽  
Author(s):  
Xiu Yun Sun ◽  
Can Chen ◽  
Wei Wang ◽  
Jin You Shen ◽  
Jian Sheng Li ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
Activated Sludge ◽  
Hydraulic Retention Time ◽  
Ph Value ◽  
Operating Conditions ◽  
Waste Activated Sludge ◽  
Optimal Conditions ◽  
Batch Experiments ◽  
Effects Of Ph ◽  
Two Phases

Waste activated sludge is always used to product methane by two phases anaerobic digestion, but fermenting to accumulate VFAs has seldom reported. This paper deals with the effects of pH value, adding ratio and hydraulic retention time (HRT) on WAS acidification during mesophilic phase in two phases anaerobic digestion (TPAD) system through batch experiments. In order to gain the most amount of VFAs for providing more carbon source, the optimal conditions for WAS mesophilic anaerobic digestion observed in this study are pH=7, adding ratio=12.5%, HRT=4d and TC/TNb value=1.7~2.0. Finally, we analyzed acid production kinetic under the optimal conditions. It can be inferred that the performance of WAS acidification is sensitive to operating conditions.

scholarly journals Application of electrochemical peroxidation (ECP) process for waste-activated sludge stabilization and system optimization using response surface methodology (RSM)

2018 ◽  
Vol 77 (6) ◽  
pp. 1765-1776 ◽  
Author(s):  
Gagik Badalians Gholikandi ◽  
Khashayar Kazemirad
Keyword(s):  
Response Surface Methodology ◽  
Activated Sludge ◽  
Response Surface ◽  
Removal Efficiency ◽  
Ph Value ◽  
System Optimization ◽  
Waste Activated Sludge ◽  
Operational Conditions ◽  
Sludge Stabilization ◽  
Rsm Optimization

Abstract In this study, the performance of the electrochemical peroxidation (ECP) process for removing the volatile suspended solids (VSS) content of waste-activated sludge was evaluated. The Fe2+ ions required by the process were obtained directly from iron electrodes in the system. The performance of the ECP process was investigated in various operational conditions employing a laboratory-scale pilot setup and optimized by response surface methodology (RSM). According to the results, the ECP process showed its best performance when the pH value, current density, H2O2 concentration and the retention time were 3, 3.2 mA/cm2, 1,535 mg/L and 240 min, respectively. In these conditions, the introduced Fe2+ concentration was approximately 500 (mg/L) and the VSS removal efficiency about 74%. Moreover, the results of the microbial characteristics of the raw and the stabilized sludge demonstrated that the ECP process is able to remove close to 99.9% of the coliforms in the raw sludge during the stabilization process. The energy consumption evaluation showed that the required energy of the ECP reactor (about 1.8–2.5 kWh (kg VSS removed)−1) is considerably lower than for aerobic digestion, the conventional waste-activated sludge stabilization method (about 2–3 kWh (kg VSS removed)−1). The RSM optimization process showed that the best operational conditions of the ECP process comply with the experimental results, and the actual and the predicted results are in good conformity with each other. This feature makes it possible to predict the introduced Fe2+ concentrations into the system and the VSS removal efficiency of the process precisely.

Chemical and Biological Treatment of Dyes

2020 ◽  
pp. 170-204
Author(s):  
Kiran Meghwal ◽  
Reema Agrawal ◽  
Srishti Kumawat ◽  
Nirmala Kumari Jangid ◽  
Chetna Ameta
Keyword(s):  
Azo Dyes ◽  
Aquatic Environment ◽  
Industrial Wastewater ◽  
Biological Treatment ◽  
New Technologies ◽  
Aquatic Organisms ◽  
Textile Wastewater ◽  
Important Concern ◽  
Industrial Needs ◽  
Living Being

Life of living or non-living being depends on water; in short, water is life. But these days, with the growing industrialization, it is spoiling a lot. Wastewater contains contaminants like acids, bases, toxic organic and inorganic dissolved solids, and colors. Out of them, the most undesirable are colors caused mainly by dyes. Color and other compounds present in water are always not desirable for domestic or industrial needs. The wastes of dyes are predominant amongst all the complex industrial wastewater. This water is dark in color and highly toxic, blocking the sunlight and affecting the ecosystem. Among all the dyes, azo dyes contribute to commercial dyes used widely in textile, plastic, leather, and paper industries as additives. The removal and degradation of azo dyes in aquatic environment is important because they are highly toxic to aquatic organisms. For every industry, clean technology has become an important concern. In this chapter, the authors discuss about existing processes as well as promising new technologies for textile wastewater decolorisation.

Anaerobic digestion of waste activated sludge combined with ozone post-treatment and recycling

2003 ◽  
Vol 48 (4) ◽  
pp. 61-68 ◽  
Author(s):  
A. Battimelli ◽  
C. Millet ◽  
J.P. Delgenès ◽  
R. Moletta
Keyword(s):  
Anaerobic Digestion ◽  
Activated Sludge ◽  
Removal Rate ◽  
Operating Conditions ◽  
Cod Removal ◽  
Process Efficiency ◽  
Recycling Rate ◽  
Waste Activated Sludge ◽  
Digested Sludge ◽  
Combined Process

The aim of the study was to determine the performances of a combined ozone/anaerobic digestion system for waste activated sludge reduction. The objective was the estimation of the process efficiency and stability when keeping constant influent flow while increasing recycled chemically treated flow. The ozonation step consisted in a partial oxidation (0.16 g O3/g SS) of the anaerobic mesophilic digested sludge. Chemical treatment of digested sludge resulted in a threefold COD solubilization and a decrease of SS of 22%. Some of the advantages of digested sludge ozonation were: deodorization, better settlement and a reduction in viscosity. However there were drawbacks: foaming during ozonation and, at high ozone doses, poorer filterability. The anaerobic digestion was carried out over 6 months with an increasing recycling of ozonated flow. Suspended solids removal rate and COD removal rate were compared with initial operating conditions for the biological reactor and the whole combined process. The optimum recycling rate was 25% with increases of SS removal and COD removal of 54% and 66% respectively when considering the combined process; corresponding to a decrease of the hydraulic retention time from 24 days to 19 days.

Microthrix parvicella foaming at the Fusina WWTP

2002 ◽  
Vol 46 (1-2) ◽  
pp. 499-502 ◽  
Author(s):  
P. Miana ◽  
L. Grando ◽  
G. Caravello ◽  
M. Fabris
Keyword(s):  
Activated Sludge ◽  
Microscopic Observation ◽  
Industrial Wastewater ◽  
The Other ◽  
Physical Parameters ◽  
High Concentration ◽  
Strong Connection ◽  
Mixed Liquor ◽  
Microthrix Parvicella

The Fusina WWTP receives civil and industrial wastewater from Venice and its hinterland. Its treatment capacity is in the range of 4,000–5,000 m3/h. In winter the Fusina WWTP is subjected to brown and viscous foams developed on the surface of the aeration basins and of the clarifiers. The microscopic observation of biological foams and activated sludge samples showed high concentration of the filamentous organism Microthrix parvicella. This paper investigates the growth of M. parvicella from January 1998 to January 1999 and relates it to foams developed on the aeration basins and clarifiers, to temperature, surfactants, BOD5, NH4, NO3, NO2, DO, PO4 and pH of the wastewater influent, to SVI and the other species of filamentous organisms of mixed liquor. The results demonstrate the strong connection of the foams developed with M. parvicella abundance, the synergic action with surfactants, the dependence of M. parvicella on temperature and no relation to the other chemical and physical parameters investigated.

Biological treatment of harmful TNT wastewater containing a high concentration of nitrogen compounds by waste activated sludge

2010 ◽  
Vol 150 ◽  
pp. 226-227 ◽  
Author(s):  
Saeki Ryosuke ◽  
Maeda Toshinari ◽  
Harada Yoichiro ◽  
Nagayasu Nobuo ◽  
Ogawa Hiroaki.I
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Waste Activated Sludge ◽  
Nitrogen Compounds ◽  
High Concentration

scholarly journals Purification of Colored Aqueous Solutions in the Adsorption Process on Magnetite Modified with Polymers

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 56
Author(s):  
Jędrys-Wolska ◽  
Korus
Keyword(s):  
Aqueous Solutions ◽  
Industrial Wastewater ◽  
Adsorption Process ◽  
Ph Value ◽  
Purification Process ◽  
Environmental Aspects ◽  
Chemical Structures ◽  
Different Types ◽  
The Subject ◽  
Dye Solutions

Colored industrial wastewater is a threat in many environmental aspects. As such, there is a need to find more effective methods for its purification. This article presents a brief overview of available methods for removing dyes from aqueous solutions, among them the adsorption process, which is the subject of this study. The course of preliminary tests on the process of cleaning dye solutions in the adsorption process is presented. Unmodified magnetite and magnetite modified with polymers were used as adsorbents. The synthesis of particular types of magnetite, the adsorption process, as well as the methods of further analyzes are described. As part of the work, the focus was put on a comparison of the effectiveness of the purification process for different types of adsorbents in relation to selected dyes. The varied conditions of the process were also analyzed. It has been shown that magnetite is an adsorbent that is easy to use, allowing effective separation of dyes of various chemical structures from aqueous solutions. The effectiveness of the process depends on the type of dye and on the pH value and can be increased in relation to some dyes by using magnetite modification with selected polymers.

Sign in / Sign up

Export Citation Format

Share Document