scholarly journals Estimating Ocean Vector Winds and Currents Using a Ka-Band Pencil-Beam Doppler Scatterometer

2018 ◽  
Author(s):  
Ernesto Rodriguez ◽  
Alexander Wineteer ◽  
Dragana Perkovic-Martin ◽  
Tamás Gál ◽  
Bryan Stiles ◽  
...  
Keyword(s):  
Wind Speed ◽  
Surface Current ◽  
Surface Currents ◽  
Pencil Beam ◽  
Doppler Measurement ◽  
Ka Band ◽  
Geophysical Model ◽  
Challenges And Opportunities ◽  
Ocean Surface Currents ◽  
Tightly Coupled

Ocean surface currents and winds are tightly coupled essential climate variables, and, given their short time scales, observing them at the same time and resolution is of great interest. DopplerScatt is an airborne Ka-band scatterometer that has been developed under NASA's Instrument Incubator Program (IIP) to provide a proof of concept of the feasability of measuring these variables using pencil-beam scanning Doppler scatterometry. In the first half of this paper, we present the Doppler scatterometer measurement and processing principles, paying particular attention to deriving a complete measurement error budget. Although Doppler radars have been used for the estimation of surface currents, pencil-beam Doppler Scatterometry offers challenges and opportunities that require separate treatment. The calibration of the Doppler measurement to remove platform and instrument biases has been a traditional challenge for Doppler systems, and we introduce several new techniques to mitigate these errors when conical scanning is used. The use of Ka-band for airborne Doppler scatterometry measurements is also new, and, in the second half of the paper, we examine the phenomenology of the mapping from radar cross section and radial velocity measurements to winds and surface currents. To this end, we present new Ka-band Geophysical Model Functions (GMF's) for winds and surface currents obtained from multiple airborne campaigns. We find that the wind Ka-band GMF exhibits similar dependence to wind speed as that for Ku-band scatterometers, such as QuikSCAT, albeit with much greater upwind-crosswind modulation. The surface current GMF at Ka-band is significantly different from that at C-band, and, above 4.5 m/s has a weak dependence on wind speed, although still dependent on wind direction. We examine the effects of Bragg-wave modulation by long waves through a Modululation Transfer Function (MTF), and show that the observed surface current dependence on winds is consistent with past Ka-band MTF observations. Finally, we provide a preliminary validation of our geophysical retrievals, which will be expanded in subsequent publications. Our results indicate that Ka-band Doppler scatterometry could be a feasible method for wide-swath simultaneous measurements of winds and currents from space.

scholarly journals Measuring Winds and Currents with Ka-Band Doppler Scatterometry: An Airborne Implementation and Progress towards a Spaceborne Mission

2020 ◽  
Vol 12 (6) ◽  
pp. 1021 ◽  
Author(s):  
Alexander Wineteer ◽  
Dragana Perkovic-Martin ◽  
Raquel Monje ◽  
Ernesto Rodríguez ◽  
Tamás Gál ◽  
...  
Keyword(s):  
Ocean Surface ◽  
Ocean Dynamics ◽  
Pencil Beam ◽  
Satellite Mission ◽  
Ka Band ◽  
Geophysical Model ◽  
Readiness Level ◽  
Ocean Surface Winds ◽  
Tightly Coupled ◽  
Wide Swath

Ocean surface winds and currents are tightly coupled, essential climate variables, synoptic measurements of which require a remote sensing approach. Global measurements of ocean vector winds have been provided by scatterometers for decades, but a synoptic approach to measuring total vector surface currents has remained elusive. Doppler scatterometry is a coherent burst-scatterometry technique that builds on the long heritage of spinning pencil beam scatterometers to enable the wide-swath, simultaneous measurement of ocean surface vector winds and currents. To prove the measurement concept, NASA funded the DopplerScatt airborne Doppler scatterometer through the Instrument Incubator Program (IIP) and Airborne Instrument Technology Transition (AITT) program. DopplerScatt has successfully shown that pencil beam Doppler scatterometry can be used to form wide swath measurements of ocean winds and currents, and has increased the technology readiness level of key instrument components, including: Ka-band pulsed radar hardware, optimized scatterometer burst-mode operation, calibration techniques, geophysical model functions, and processing algorithms. With the promise and progress shown by DopplerScatt, and the importance of air-sea interactions in mind, the National Academy’s Decadal Survey has targeted simultaneous measurements of winds and currents from a Doppler scatterometer for an Earth Explorer class spaceborne mission. Besides DopplerScatt’s place as a technology stepping stone towards a satellite mission, DopplerScatt provides scientifically important measurements of ocean currents and winds (400 m resolution) and their derivatives (1 km resolution) over a 25 km swath. These measurements are enabling studies of the submesoscales and air-sea interactions that were previously impossible, and are central to the upcoming NASA Earth Ventures Suborbital-3 Submesoscale Ocean Dynamics Experiment (S-MODE). This paper summarizes the development of DopplerScatt hardware, systems, calibration, and operations, and how advances in each relate to progress towards a spaceborne Doppler scatterometer mission.

scholarly journals Ka-Band Doppler Scatterometry over a Loop Current Eddy

2020 ◽  
Vol 12 (15) ◽  
pp. 2388
Author(s):  
Ernesto Rodríguez ◽  
Alexander Wineteer ◽  
Dragana Perkovic-Martin ◽  
Tamás Gál ◽  
Steven Anderson ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Weather Prediction ◽  
Surface Current ◽  
Radar Data ◽  
Operating Conditions ◽  
Moving Frame ◽  
Surface Currents ◽  
Loop Current ◽  
Ka Band ◽  
Geophysical Model

Doppler scatterometry is a promising new technique for the simultaneous measurement of ocean surface currents and winds. These measurements have been recommended by the recent US NRC Decadal Review for NASA as being priority variables for the coming decade of Earth observations. In addition, currents and winds are useful for many applications, including assessing the operating conditions for oil platforms or tracking the dispersal of plastic or oil by surface currents and winds. While promising, Doppler scatterometry is relatively new and understanding the measurement characteristics is an important area of research. To this end, Chevron sponsored the deployment of DopplerScatt, a NASA/JPL Ka-band Doppler scatterometer, over instrumented sites located at the edge of a Gulf of Mexico Loop Current Eddy (LCE). In addition to in situ measurements, coincident synoptic maps of surface currents were collected by the Areté ROCIS instrument, an optical current measurement system. Here we report on the results of this experiment for both surface currents and winds. Surface current comparisons show that the Ka-band Current Geophysical Model Function (CGMF) needs to include wind drift currents, which could not be estimated with prior data sets. Once the CGMF is updated, ROCIS and DopplerScatt show good agreement for surface current speeds, but, at times, direction differences on the order of 10° can occur. Remote sensing optical and radar data agree better among themselves than with ADCP currents measured at 5 m depth, showing that remote sensing is sensitive to the the currents in top 1 m of the ocean. The LCE data provided a unique opportunity to study the effects of surface currents and stability conditions on scatterometer winds. We show that, like Ku-band, Ka-band estimates of winds are related to neutral winds (and wind stress) and are referenced relative to the moving frame provided by the current. This is useful for the study of air-sea interactions, but must be accounted for when using scatterometer winds for weather prediction.

scholarly journals Surface Currents Derived from SAR Doppler Processing: An Analysis over the Naples Coastal Region in South Italy

2020 ◽  
Vol 8 (3) ◽  
pp. 203 ◽  
Author(s):  
Virginia Zamparelli ◽  
Francesca De Santi ◽  
Andrea Cucco ◽  
Stefano Zecchetto ◽  
Giacomo De Carolis ◽  
...  
Keyword(s):  
Thermohaline Circulation ◽  
Coastal Region ◽  
Surface Current ◽  
Circulation Pattern ◽  
Integrated Analysis ◽  
Surface Currents ◽  
South Italy ◽  
Geophysical Model ◽  
Doppler Data

Several studies have shown the capabilities of Synthetic Aperture Radar to map sea currents in ocean regions mainly characterized by large flows. We consider the well known method based on the analysis of the Doppler Centroid. The Doppler, as, in general, the scattering from the sea, is sensitive to several phenomena, occurring between the upper ocean and atmospheric boundary layers. To investigate such phenomena, we considered the combined use of both ENVISAT calibrated amplitude and Doppler data in conjunction with hindcast wind information provided by atmospheric models as well as Wind and Doppler Geophysical Model Functions (W/D-GMF) developed, in the literature, for C-Band systems. This integrated analysis for the interpretation of the Doppler surface currents measurements was carried out on a case study located in the Mediterranean Sea which is characterized by a general low circulation regime: specifically, the coastal region around the city of Naples. In this case study, we show that generally, wind plays a direct significant role in the observed Doppler surface current. The availability of an oceanographic numerical model for one of the analyzed cases also allowed us to attempt to interpret the effect of the typical thermohaline circulation pattern on the Doppler anomaly.

scholarly journals Velocity Estimation of Ocean Surface Currents in along-Track InSAR System Based on Conditional Generative Adversarial Networks

2021 ◽  
Vol 13 (20) ◽  
pp. 4088
Author(s):  
He Yan ◽  
Qianru Hou ◽  
Guodong Jin ◽  
Xing Xu ◽  
Gong Zhang ◽  
...  
Keyword(s):  
Current Velocity ◽  
Surface Current ◽  
Ocean Surface ◽  
Velocity Estimation ◽  
Training Dataset ◽  
Generative Adversarial Networks ◽  
Surface Currents ◽  
Ocean Surface Currents ◽  
Ocean Surface Current ◽  
Along Track

Velocity estimation of ocean surface currents is of great significance in the fields of the fishery, shipping, sewage discharge, and military affairs. Over the last decade, along-track interferometric synthetic aperture radar (along-track InSAR) has been demonstrated to be one of the important instruments for large-area and high-resolution ocean surface current velocity estimation. The calculation method of the traditional ocean surface current velocity, as influenced by the large-scale wave orbital velocity and the Bragg wave phase velocity, cannot easily separate the current velocity, characterized by large error and low efficiency. In this paper, a novel velocity estimation method of ocean surface currents is proposed based on Conditional Generative Adversarial Networks (CGANs). The main processing steps are as follows: firstly, the known ocean surface current field diagrams and their corresponding interferometric phase diagrams are constructed as the training dataset; secondly, the estimation model of the ocean surface current field is constructed based on the pix2pix algorithm and trained by the training dataset; finally, the interferometric phase diagrams in the test dataset are input into the trained model. In the simulation experiment, processing results of the proposed method are compared with those of traditional ocean surface current velocity estimation methods, which demonstrate the efficiency and effectiveness of the novel method.

scholarly journals Measuring ocean total surface current velocity with the KuROS and KaRADOC airborne near-nadir Doppler radars: a multi-scale analysis in preparation for the SKIM mission

Ocean Science ◽  
2020 ◽  
Vol 16 (6) ◽  
pp. 1399-1429
Author(s):  
Louis Marié ◽  
Fabrice Collard ◽  
Frédéric Nouguier ◽  
Lucia Pineau-Guillou ◽  
Danièle Hauser ◽  
...  
Keyword(s):  
Surface Wave ◽  
Wind Speed ◽  
Current Velocity ◽  
Surface Current ◽  
Sea Surface ◽  
Line Of Sight ◽  
Velocity Signal ◽  
Ka Band ◽  
Ku Band

Abstract. Surface currents are poorly known over most of the world's oceans. Satellite-borne Doppler wave and current scatterometers (DWaCSs) are among the proposed techniques to fill this observation gap. The Sea surface KInematics Multiscale (SKIM) proposal is the first satellite concept built on a DWaCS design at near-nadir angles and was demonstrated to be technically feasible as part of the European Space Agency Earth Explorer program. This article describes preliminary results from a field experiment performed in November 2018 off the French Atlantic coast, with sea states representative of the open ocean and a well-known tide-dominated current regime, as part of the detailed design and feasibility studies for SKIM. This experiment comprised airborne measurements performed using Ku-band and Ka-band Doppler radars looking at the sea surface at near-nadir incidence in a real-aperture mode, i.e., in a geometry and mode similar to that of SKIM, as well as an extensive set of in situ instruments. The Ku-band Radar for Observation of Surfaces (KuROS) airborne radar provided simultaneous measurements of the radar backscatter and Doppler velocity in a side-looking configuration, with a horizontal resolution of about 5 to 10 m along the line of sight and integrated in the perpendicular direction over the real-aperture 3 dB footprint diameter (about 580 m). The Ka-band RADar for Ocean Current (KaRADOC) system, also operating in the side-looking configuration, had a much narrower beam, with a circular footprint only 45 m in diameter. Results are reported for two days with contrasting conditions, a strong breeze on 22 November 2018 (wind speed 11.5 m s−1, Hs 2.6 m) and gentle breeze on 24 November 2018 (wind speed 5.5 m s−1, Hs 1.7 m). The measured line-of-sight velocity signal is analyzed to separate a non-geophysical contribution linked to the aircraft velocity, a geophysical contribution due to the intrinsic motion of surface waves and the desired surface current contribution. The surface wave contribution is found to be well predicted by Kirchhoff scattering theory using as input parameters in situ measurements of the directional spectrum of long waves, complemented by the short wave spectrum of Elfouhaily et al. (1997). It is found to be closely aligned with the wind direction, with small corrections due to the presence of swell. Its norm is found to be weakly variable with wind speed and sea state, quite stable and close to C0=2.0ms-1 at the Ka band, and more variable and close to C0=2.4ms-1 at the Ku band. These values are 10 %–20 % smaller than previous theoretical estimates. The directional spread of the short gravity waves is found to have a marked influence on this surface wave contribution. Overall, the results of this study support the feasibility of near-nadir radar Doppler remote sensing of the ocean total surface current velocity (TSCV).

scholarly journals Impact of currents on surface flux computations and their feedback on dynamics at regional scales

Ocean Science ◽  
2015 ◽  
Vol 11 (4) ◽  
pp. 657-666 ◽  
Author(s):  
A. Olita ◽  
I. Iermano ◽  
L. Fazioli ◽  
A. Ribotti ◽  
C. Tedesco ◽  
...  
Keyword(s):  
Surface Current ◽  
Surface Flux ◽  
Power Input ◽  
Western Mediterranean ◽  
Surface Fluxes ◽  
Surface Currents ◽  
Qualitative Comparison ◽  
Satellite Sst ◽  
Ocean Surface Currents ◽  
The Impact

Abstract. A twin numerical experiment was conducted in the seas around the island of Sardinia (Western Mediterranean) to assess the impact, at regional and coastal scales, of the use of relative winds (i.e., taking into account ocean surface currents) in the computation of heat and momentum fluxes through standard (Fairall et al., 2003) bulk formulas. The Regional Ocean Modelling System (ROMS) was implemented at 3 km resolution in order to well resolve mesoscale processes, which are known to have a large influence in the dynamics of the area. Small changes (few percent points) in terms of spatially averaged fluxes correspond to quite large differences of such quantities (about 15 %) in spatial terms and in terms of kinetics (more than 20 %). As a consequence, wind power input P is also reduced by ~ 14 % on average. Quantitative validation with satellite SST suggests that such a modification of the fluxes improves the model solution especially in the western side of the domain, where mesoscale activity (as suggested by eddy kinetic energy) is stronger. Surface currents change both in their stable and fluctuating part. In particular, the path and intensity of the Algerian Current and of the Western Sardinia Current (WSC) are impacted by the modification in fluxes. Both total and eddy kinetic energies of the surface current field are reduced in the experiment where fluxes took into account the surface currents. The main dynamical correction is observed in the SW area, where the different location and strength of the eddies influence the path and intensity of the WSC. Our results suggest that, even at local scales and in temperate regions, it would be preferable to take into account such a contribution in flux computations. The modification of the original code, substantially cost-less in terms of numerical computation, improves the model response in terms of surface fluxes (SST validated) and it also likely improves the dynamics as suggested by qualitative comparison with satellite data.

scholarly journals The Influence of Fetch on the Response of Surface Currents to Wind Studied by HF Ocean Surface Radar

2008 ◽  
Vol 38 (5) ◽  
pp. 1107-1121 ◽  
Author(s):  
Yadan Mao ◽  
Malcolm L. Heron
Keyword(s):  
Wind Speed ◽  
Momentum Transfer ◽  
Surface Current ◽  
Ocean Surface ◽  
Growth Function ◽  
Current Data ◽  
Hf Radar ◽  
Stokes Drift ◽  
Surface Currents ◽  
Sea State

Abstract The momentum transfer from wind to sea generates surface currents through both the wind shear stress and the Stokes drift induced by waves. This paper addresses issues in the interpretation of HF radar measurements of surface currents and momentum transfer from air to sea. Surface current data over a 30-day period from HF ocean surface radar are used to study the response of surface currents to wind. Two periods of relatively constant wind are identified—one for the short-fetch condition and the other for the long-fetch condition. Results suggest that the ratio of surface current speed to wind speed is larger under the long-fetch condition, while the angle between the surface current vector and wind vector is larger under the short-fetch condition. Data analysis shows that the Stokes drift dominates the surface currents under the long-fetch condition when the sea state is more mature, while the Stokes drifts and Ekman-type currents play almost equally important roles in the total currents under the short-fetch condition. The ratios of Stokes drift to wind speed under these two fetch conditions are shown to agree well with results derived from the empirical wave growth function. These results suggest that fetch, and therefore sea state, significantly influences the total response of surface current to wind in both the magnitude and direction by variations in the significance of Stokes drift. Furthermore, this work provides observational evidence that surface currents measured by HF radar include Stokes drift. It demonstrates the potential of HF radar in addressing the issue of momentum transfer from air to sea under various environmental conditions.

scholarly journals Validation of NOAA CyGNSS Wind Speed Product with the CCMP Data

2021 ◽  
Vol 13 (9) ◽  
pp. 1832
Author(s):  
Xiaohui Li ◽  
Dongkai Yang ◽  
Jingsong Yang ◽  
Guoqi Han ◽  
Gang Zheng ◽  
...  
Keyword(s):  
Wind Speed ◽  
Comprehensive Evaluation ◽  
Surface Wind ◽  
Temporal Analysis ◽  
Satellite System ◽  
Wind Retrieval ◽  
Sea Surface Wind ◽  
Geophysical Model ◽  
Geophysical Model Function ◽  
Global Navigation Satellite

The National Aeronautics and Space Administration (NASA) Cyclone Global Navigation Satellite System (CyGNSS) mission was launched in December 2016, which can remotely sense sea surface wind with a relatively high spatio-temporal resolution for tracking tropical cyclones. In recent years, with the gradual development of the geophysical model function (GMF) for CyGNSS wind retrieval, different versions of CyGNSS Level 2 products have been released and their performance has gradually improved. This paper presents a comprehensive evaluation of CyGNSS wind product v1.1 produced by the National Oceanic and Atmospheric Administration (NOAA). The Cross-Calibrated Multi-Platform (CCMP) analysis wind (v02.0 and v02.1 near real time) products produced by Remote Sensing Systems (RSS) were used as the reference. Data pairs between the NOAA CyGNSS and RSS CCMP products were processed and evaluated by the bias and standard deviation SD. The CyGNSS dataset covers the period between May 2017 and December 2020. The statistical comparisons show that the bias and SD of CyGNSS relative to CCMP-nonzero collocations when the flag of CCMP winds is nonzero are –0.05 m/s and 1.19 m/s, respectively. The probability density function (PDF) of the CyGNSS winds coincides with that of CCMP-nonzero. Furthermore, the average monthly bias and SD show that CyGNSS wind is consistent and reliable generally. We found that negative deviation mainly appears at high latitudes in both hemispheres. Positive deviation appears in the China Sea, the Arabian Sea, and the west of Africa and South America. Spatial–temporal analysis demonstrates the geographical anomalies in the bias and SD of the CyGNSS winds, confirming that the wind speed bias shows a temporal dependency. The verification and comparison show that the remotely sensed wind speed measurements from NOAA CyGNSS wind product v1.1 are in good agreement with CCMP winds.

Sign in / Sign up

Export Citation Format

Share Document