scholarly journals Determination of the Visual Preferences of Different Habitat Types

2018 ◽  
Author(s):  
Engin Eroğlu ◽  
Sertaç Kaya ◽  
Tuba Gul Dogan ◽  
Alperen Meral ◽  
Sena Demirci ◽  
...  
Keyword(s):  
Conservation Status ◽  
Habitat Type ◽  
Visual Quality ◽  
Point Of View ◽  
Quality Analysis ◽  
Habitat Types ◽  
Landscape Characteristics ◽  
Visual Preferences ◽  
Visual Attraction

The unique qualities of areas with natural landscape features help provide sustainability. Moreover, their different vegetation covers and ecosystems contribute to the preservation of their visual attraction. In recent years, the demand for natural areas has not only been seen at a recreational level, but has also become associated with the conservation and sustainability of those areas. Although the concept of sustainability is expressed from an ecological point of view, studies indicate that the visual aspect is also an important component. Thus, in this study, a visual quality assessment was carried out which considered both objective and subjective evaluations of different habitat types. Efteni lake-wetland and Melen Ağzı dunes (Düzce), Anzer, Ayder, and Çat Düzü highlands (Rize), and Sultanmurat and Taşli highlands (Trabzon) were selected as the study areas. A visual quality analysis was conducted with a total of 43 participants (23 students, 16 local inhabitants and four lecturers) in order establish their preferences in areas with different landscape characteristics. For the determination of the visual qualifications of these areas, a total of 24 photographs showing typical images representing each habitat type (three photographs for each) were employed. Taking perceptual parameters into consideration, assessment of visual quality was made according to the points given to each photo by the participants. Consequently, differences in visual quality were found to be influenced by the demographic status of the participants, differences in habitat types, recreational trends and the conservation status of the habitats.

Nutritional relationships between hemi-parasitic mistletoe and some of its deciduous hosts in different habitats

Biologia ◽  
2010 ◽  
Vol 65 (5) ◽  
Author(s):  
Cengiz Türe ◽  
Harun Böcük ◽  
Zerrin Aşan
Keyword(s):  
Host Plants ◽  
Community Dynamics ◽  
Plant Root ◽  
Habitat Type ◽  
Viscum Album ◽  
Mineral Nutrient ◽  
Habitat Types ◽  
Nutrient Partitioning ◽  
Host Parasite

AbstractParasitism of plants by other plants provides an exceptional opportunity for investigating correlative nutritional relationships. Because of lacking a usual plant-root sytem capable of active uptake, the best correlation for predicting the concentrations of elements in parasitic plants is often those in the host plants. This study, therefore, mainly focuses on determination of i) mineral nutrient partitioning between hemi-parasitic white berry mistletoe (Viscum album L. subsp. album) and four of its deciduous hosts growing in different habitats namely wetland and semi-arid and ii) effects of these habitat types on nutrient absorption. During the research, leaf samples of both hemi-parasites and their host plants were chemically analysed, mistletoes on each host plants were counted and the results were considered statistically. Concentrations of some elements (N, P, K, Na, S, Cu, Zn) were higher in mistletoe whereas some others (Ca, Mg, Fe, Mn and B) were higher in the hosts (p< 0.05). Habitat type was also determined to be effective in host-parasite systems. Revealing information about nutritional interactions between multi-host hemi-parasites and their host plants is a useful tool to understand their functions in ecosystems, population-community dynamics and their co-evolution process.

scholarly journals List of Species and Conservation Status of Avifauna and Small mammal around Bade Segment Area of River Yobe, Yobe State, Nigeria

2021 ◽  
Vol 04 (12) ◽  
Author(s):  
Adam, L. I. ◽  
Keyword(s):  
Small Mammals ◽  
Small Mammal ◽  
Conservation Status ◽  
Habitat Type ◽  
Bird Species ◽  
Line Transect ◽  
Habitat Types ◽  
Mammal Species ◽  
River Bank ◽  
Small Mammal Species

The study was carried out to assess a Checklist of avifauna and small mammal species along Bade catchment area of Yobe State, Nigeria. Preliminary survey was conducted around the river, three (3) habitat types were identified; (river bank, farm lands and flood plain). The line transect was 8 km in length. Two (2) transects were established per habitat type, making a total of six (6) transects. The transects were 100 m apart to the left or right in order to avoid double counting of species. A distance of 200m was maintained between each habitat. The data obtained were analyses using descriptive statistics (Frequency tables and Charts were used to portrayed the findings. The result of the study; showed that a total of 50 bird species in 28 families were recorded. RB had the highest individuals of Fifty (50) species while FP has the lowest with ten (10) species. The Bird family Columbidae has the highest number with six (6) of species, while the lowest were Ardeidae, Sturnidae and Tytonidae with one species in each of the habitat types. However, checklist of small mammal species also indicated that a total of 6 species of small mammals belonging to 4 families were identified. The result of the study shows that the family Muridae has 3 species which was the highest number of per family identified in the study area, this is due to the fact that Muridae family are the most common small mammals in the study area. And both bird small species fell under least concern (LC) category except Pallid Harrier Circus macrourus which felled under near threatened (NT) species. However, awareness campaign should also be organize for the residents around the study area on the presence, distribution of bird and small mammal species and also disturbing effect of their activities on bird and small mammal around the segment area of river Yobe.

scholarly journals Riparian Vegetation on the Left Tributaries of the Danube Along the “Clisura” Cross Valley

2016 ◽  
Vol 18 (3) ◽  
pp. 15-30
Author(s):  
Erika Schneider-Binder
Keyword(s):  
Riparian Vegetation ◽  
Conservation Status ◽  
Natura 2000 ◽  
Alnus Glutinosa ◽  
Point Of View ◽  
Habitat Types ◽  
Natura 2000 Network ◽  
Alluvial Forests ◽  
Iron Gate ◽  
Fringe Communities

Abstract The author presents the riparian vegetation of the left tributaries of the Danube in the “Clisura” area including the habitat types 91E0* Alluvial forests with Alnus glutinosa and Fraxinus excelsior (Alno-Padion, Alnion incanae, Salicion albae), 6430 Hydrophilous tall herb fringe communities and other interlocking habitats. They are analysed from the ecological and the phytocoenological point of view. Discussed are also their phytogeographical particularities. Furthermore are emphasized the changes of the vegetation on the lower part of the tributaries as a consequence of the construction of the Iron Gate power plant and the backwater situation. Finally the conservation status of the riparian habitats is analysed in the context of their importance for the European Natura 2000 network.

scholarly journals Do the assemblages of benthic macroinvertebrates in nearshore waters of Western Australia vary among habitat types, zones and seasons?

2005 ◽  
Vol 85 (2) ◽  
pp. 217-232 ◽  
Author(s):  
M.D. Wildsmith ◽  
I.C. Potter ◽  
F.J. Valesini ◽  
M.E. Platell
Keyword(s):  
Species Composition ◽  
Benthic Macroinvertebrates ◽  
Habitat Type ◽  
Abundant Species ◽  
Subtidal Zone ◽  
Habitat Types ◽  
Environmental Characteristics ◽  
Deposit Feeding ◽  
Number Of Individuals

Benthic macroinvertebrates were sampled seasonally in the subtidal and upper and lower swash zones at two sites in each of six nearshore habitat types on the lower west coast of Australia. The habitat types, which differed mainly in the extent of their exposure to wave activity and whether sea grass and/or nearshore reefs were present, had been distinguished quantitatively using values for a suite of seven statistically-selected enduring environmental characteristics (Valesini et al., 2003). The core samples yielded 121 species representing eight phyla, among which the Polychaeta, Malacostraca and Bivalvia were the most speciose classes, contributing ∼38, 23 and 10%, respectively, to the total number of individuals. The total number of species and mean density of macroinvertebrates at the most protected habitat type (1), i.e. 70 and 209·2 individuals 0·1 m−2, respectively, were far greater than in any other habitat type. Habitat type influenced species composition to a greater extent than either zone or season. Furthermore, the extents of the differences among the species compositions of the six habitat types statistically matched the extents of the differences among the values for the suite of enduring environmental characteristics that distinguished each of those habitat types. Overall, the species composition at habitat type 1 was the most distinct, containing five abundant species of polychaetes that were adapted to deposit-feeding in calm waters with high levels of organic material and which were rare in all other habitat types. In contrast, the fauna at the most exposed habitat type was characterized by four crustacean species and a species of bivalve and polychaete, whose mobility and tough external surface facilitated their survival and feeding in turbulent waters. The zonal differences in faunal compositions among habitat types were greatest in the case of the subtidal zone. The faunal compositions differed among zones and seasons only at the most protected habitat type.

scholarly journals A multiscale assessment of Red-tailed Hawk reproductive success relative to urban density and habitat type

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Justin H White ◽  
Jessi L Brown ◽  
Zachary E Ormsby
Keyword(s):  
Urban Areas ◽  
Urban Expansion ◽  
Habitat Type ◽  
Nesting Success ◽  
Arid Environments ◽  
Hatch Date ◽  
Urban Density ◽  
Landscape Characteristics ◽  
Suburban Areas ◽  
Breeding Seasons

Abstract Despite the unique threats to wildlife in urban areas, many raptors have established successfully reproducing urban populations. To identify variations in raptor breeding ecology within an urban area, we compared metrics of Red-tailed Hawk reproductive attempts to landscape characteristics in Reno and Sparks, NV, USA during the 2015 and 2016 breeding seasons. We used the Apparent Nesting Success and logistic exposure methods to measure nesting success of the Red-tailed Hawks. We used generalized linear models to relate nesting success and fledge rate to habitat type, productivity to hatch date (Julian day) and hatch date to urban density. Nesting success was 86% and 83% for the respective years. Nesting success increased in grassland-agricultural and shrub habitats and decreased in riparian habitat within the urban landscape. Productivity was 2.23 and 2.03 per nest for the breeding seasons. Fledge rates were 72% and 77%, respectively, and decreased in riparian areas. Nestlings hatched earlier with increased urban density and earliest in suburban areas, following a negative quadratic curve. Nesting success and productivity for this population were high relative to others in North America. Productivity increased in habitats where ground prey was more accessible. We suggest that suburban areas, if not frequently disturbed, provide sufficient resources to sustain Red-tailed Hawks over extended periods. As urban expansion continues in arid environments globally, we stress that researchers monitor reproductive output across the urban predator guild to elucidate patterns in population dynamics and adaptation.

scholarly journals Evaluation of the Ability to Accurately Produce Angular Details by 3D Printing of Plastic Parts

Machines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 150
Author(s):  
Andrei Marius Mihalache ◽  
Gheorghe Nagîț ◽  
Laurențiu Slătineanu ◽  
Adelina Hrițuc ◽  
Angelos Markopoulos ◽  
...  
Keyword(s):  
3D Printing ◽  
Point Of View ◽  
Vertex Angle ◽  
Function Type ◽  
Constant Height ◽  
3D Printers ◽  
3D Printed ◽  
Mathematical Processing ◽  
Plastic Parts

3D printing is a process that has become widely used in recent years, allowing the production of parts with relatively complicated shapes from metallic and non-metallic materials. In some cases, it is challenging to evaluate the ability of 3D printers to make fine details of parts. For such an assessment, the printing of samples showing intersections of surfaces with low angle values was considered. An experimental plan was designed and materialized to highlight the influence of different factors, such as the thickness of the deposited material layer, the printing speed, the cooling and filling conditions of the 3D-printed part, and the thickness of the sample. Samples using areas in the form of isosceles triangles with constant height or bases with the same length, respectively, were used. The mathematical processing of the experimental results allowed the determination of empirical mathematical models of the power-function type. It allowed the detection of both the direction of actions and the intensity of the influence exerted by the input factors. It is concluded that the strongest influence on the printer’s ability to produce fine detail, from the point of view addressed in the paper, is exerted by the vertex angle, whose reduction leads to a decrease in printing accuracy.

Selective Determination of Entecavir in the Presence of Its Oxidative Degradate by Spectrophotometric and Chromatographic Methods

2021 ◽  
Author(s):  
Heba M El-Sayed ◽  
Laila E Abdel Fattah ◽  
Hisham E Abdellatef ◽  
Maha A Hegazy ◽  
Mai M Abd El-Aziz
Keyword(s):  
High Selectivity ◽  
Oxidative Degradation ◽  
Hplc Method ◽  
Peak Amplitude ◽  
Quality Analysis ◽  
Official Method ◽  
Selective Determination ◽  
Significant Difference ◽  
Development And Validation

Abstract Background Entecavir (ENT) is an antiretroviral agent prescribed for treatment of HBV and HIV. Objective Development and validation of three simple, sensitive, selective, and precise methods for determination of ENT in presence of its oxidative degradation product (ENT deg.). Methods The first method was based on second derivative (D2) spectrophotometry through measuring the peak amplitude of D2 spectra at 293.6 nm. The second one is mean centering of the ratio spectra (MCR), which allowed measuring the peak amplitude at 280.0 nm. While the third method was HPLC; where ENT was separated from ENT deg. using Zobrax C18column and methanol: water (30:70, v/v), pH 3 as a mobile phase. The three developed methods were validated according to ICH guidelines. Results Linearity range of ENT was 5.00–50.00 μg/mL for both D2and MCR. However, higher sensitivity was achieved using HPLC (1.00–50.00 μg/mL). Accuracy of ENT were 100.60%±0.547, 101.55%±1.2071 and 100.61%±1.207 for D2, MCR and HPLC methods, respectively, and precision was within 1.280. Conclusions The developed methods were successfully applied for the determination of ENT in Tecavir® tablets without interference from ENT deg. They showed no significant difference compared with the official method as well as they could be applied in the quality analysis of ENT with high selectivity, accuracy, and precision. Highlights ENT was quantified using two spectrophotometric (D2 and MCR) methods and an HPLC method in presence of ENT deg. The proposed methods were applied to analysis of ENT tablets with high selectivity, sensitivity, and accuracy.

Determination of a Rubber-Like Material Model as an Inverse Problem

2011 ◽  
Vol 70 ◽  
pp. 225-230 ◽  
Author(s):  
Agnieszka Derewonko ◽  
Andrzej Kiczko
Keyword(s):  
Selection Process ◽  
Axial Stress ◽  
Constitutive Models ◽  
Material Model ◽  
Polyester Fabric ◽  
Point Of View ◽  
Air Cushion ◽  
Ill Conditioning ◽  
Stress States

The purpose of this paper is to describe the selection process of a rubber-like material model useful for simulation behaviour of an inflatable air cushion under multi-axial stress states. The air cushion is a part of a single segment of a pontoon bridge. The air cushion is constructed of a polyester fabric reinforced membrane such as Hypalon®. From a numerical point of view such a composite type poses a challenge since numerical ill-conditioning can occur due to stiffness differences between rubber and fabric. Due to the analysis of the large deformation dynamic response of the structure, the LS-Dyna code is used. Since LS-Dyna contains more than two-hundred constitutive models the inverse method is used to determine parameters characterizing the material on the base of results of the experimental test.

Resistance to Outflow of Cerebrospinal Fluid Determined by Bolus Injection Technique and Constant Rate Steady State Infusion in Humans

Neurosurgery ◽  
1985 ◽  
Vol 16 (3) ◽  
pp. 336-340 ◽  
Author(s):  
Michael Kosteljanetz
Keyword(s):  
Cerebrospinal Fluid ◽  
Steady State ◽  
Bolus Injection ◽  
Point Of View ◽  
Injection Technique ◽  
Communicating Hydrocephalus ◽  
Constant Rate ◽  
High Degree ◽  
Infusion Technique

Abstract Two methods for the determination of resistance to the outflow of cerebrospinal fluid, the bolus injection technique and the constant rate steady state infusion technique, were compared. Thirty-two patients with a variety of intracranial diseases (usually communicating hydrocephalus) were studied. There was a high degree of correlation between the resistance values obtained with the two methods, but values based on the bolus injection technique were systematically and statistically significantly lower than those obtained with the constant rate infusion test. From a practical point of view. both methods were found to be applicable in a clinical setting.

scholarly journals Assessment of the rarity and conservation status of the Colombian endemic brown hairy dwarf porcupine Coendou vestitus

Oryx ◽  
2020 ◽  
pp. 1-6
Author(s):  
María M. Torres-Martínez ◽  
Héctor E. Ramírez-Chaves ◽  
Elkin A. Noguera-Urbano ◽  
Fernando C. Passos
Keyword(s):  
Small Body ◽  
Conservation Status ◽  
Natural Habitat ◽  
Habitat Type ◽  
Iucn Red List ◽  
Red List ◽  
Small Range ◽  
Minimum Convex Polygon ◽  
Area Of Occupancy ◽  
Species Rarity

Abstract The brown hairy dwarf porcupine Coendou vestitus is a poorly studied Andean species endemic to Colombia. Its current Red List category is contradictory: globally it is categorized as Data Deficient but in Colombia it is categorized as Vulnerable. This contradiction has limited the implementation of conservation programmes. We evaluate the level of rarity of the species and provide consolidated information for a new assessment of its Red List status. We reviewed literature, photographs, and voucher specimens in natural history collections. Using the confirmed records, we estimated the extent of occurrence (EOO) based on the minimum convex polygon and the area of occupancy (AOO) summing the area of grid squares occupied by the species. We found that C. vestitus is very rare, with a small range, low estimated population density, occurrence in only one habitat type and small body size. The species has an EOO of 3,323 km2 and an AOO of 24 km2, based on six confirmed localities, all on the western slopes of the Eastern Cordillera, in the central Andean region of Colombia. Based on the species' rarity, restricted distribution, and threats to its natural habitat, we recommend its categorization as Endangered on the IUCN Red List. This will help delineate research and conservation efforts for this porcupine, which has a highly restricted range and inhabits the threatened Andean forest.

Sign in / Sign up

Export Citation Format

Share Document