scholarly journals Friction Stir Processing Of TIG And Friction Stir Welded Dissimilar Alloy Joints: A Review

2019 ◽  
Author(s):  
Sipokazi Mabuwa ◽  
Velaphi Msomi
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Friction Stir Processing ◽  
Aluminium Alloys ◽  
Food Packaging ◽  
Processing Technique ◽  
Tig Welding ◽  
Automotive Electronics ◽  
Friction Stir ◽  
Dissimilar Alloys

The use of aluminium alloys continues to grow in many applications to mention a few aerospace, automotive, electronics, electricity, construction and food packaging. With so much demand there is a new interest in welding of dissimilar aluminium alloys. Some of the welding techniques used to join dissimilar aluminium alloys include friction stir welding and TIG welding. The welding of dissimilar alloys affects the mechanical properties negatively due to porosity and cracking during the welding. This then suggests that there should be a process which can be used to improve the dissimilar alloys mechanical properties post its production. Friction stir processing was found to be one of the mechanical techniques that could be used to improve the mechanical properties of the material. This paper reports on the literature on the friction stir welding, TIG welding and friction stir processing techniques published so far, with the aim to identify the gap in the use of friction stir process as a post processing technique of the weld joints.

scholarly journals Review on Friction Stir Processed TIG and Friction Stir Welded Dissimilar Alloy Joints

Metals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 142 ◽  
Author(s):  
Sipokazi Mabuwa ◽  
Velaphi Msomi
Keyword(s):  
Friction Stir Welding ◽  
Friction Stir Processing ◽  
Aluminium Alloys ◽  
Processing Technique ◽  
Inert Gas ◽  
Tungsten Inert Gas Welding ◽  
Friction Stir ◽  
Dissimilar Alloys ◽  
The Status

There is an increase in reducing the weight of structures through the use of aluminium alloys in different industries like aerospace, automotive, etc. This growing interest will lead towards using dissimilar aluminium alloys which will require welding. Currently, tungsten inert gas welding and friction stir welding are the well-known techniques suitable for joining dissimilar aluminium alloys. The welding of dissimilar alloys has its own dynamics which impact on the quality of the weld. This then suggests that there should be a process which can be used to improve the welds of dissimilar alloys post their production. Friction stir processing is viewed as one of the techniques that could be used to improve the mechanical properties of a material. This paper reports on the status and the advancement of friction stir welding, tungsten inert gas welding and the friction stir processing technique. It further looks at the variation use of friction stir processing on tungsten inert gas and friction stir welded joints with the purpose of identifying the knowledge gap.

scholarly journals Review on Friction Stir Processed TIG And Friction Stir Welded Dissimilar Alloy Joints

2019 ◽  
Author(s):  
Sipokazi Mabuwa ◽  
Velaphi Msomi
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Friction Stir Processing ◽  
Welded Joints ◽  
Aluminium Alloys ◽  
Knowledge Gap ◽  
Friction Stir ◽  
Dissimilar Alloys ◽  
The Status

There is an increase towards reducing the weight of structures through the use of aluminium alloys in different industries like aerospace, automotive, etc. This growing interest would lead towards using dissimilar aluminium alloys which would require welding. TIG and friction stir welding are the well-known techniques that are currently suitable for joining dissimilar aluminium alloys. The welding of dissimilar alloys has its own dynamics which impact on the quality of the weld. This then suggests that there should be a process which can be used to improve the dissimilar alloys welds post their production. Friction stir processing is viewed as one of the techniques that could be used to improve the mechanical properties of the material. This paper reports on the status and the advancement of FSW, TIG and FSP technique. It further looks at the variation use of FSP on TIG and FSW welded joints with the purpose of identifying the knowledge gap.

scholarly journals Mechanical Properties of Friction Stir Welded AA1050-H14 and AA5083-H111 Joint: Sampling Aspect

Metals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 214 ◽  
Author(s):  
Velaphi Msomi ◽  
Nontle Mbana
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Aluminium Alloys ◽  
Parameters Optimization ◽  
Welding Parameters ◽  
Friction Stir ◽  
Long Period ◽  
Dissimilar Alloys ◽  
Welding Technique

Welding of dissimilar aluminium alloys has been a challenge for a long period until the discovery of the solid-state welding technique called friction stir welding (FSW). The discovery of this technique encouraged different research interests revolving around the optimization of this technique. This involves the welding parameters optimization and this optimization is categorized into two classes, i.e., similar alloys and dissimilar alloys. This paper reports about the mechanical properties of the friction stir welded dissimilar AA1050-H14 and AA5083-H111 joint. The main focus is to compare the mechanical properties of specimens extracted from different locations of the welds, i.e., the beginning, middle, and the end of the weld. The specimen extracted at the beginning of the weld showed low tensile properties compared to specimens extracted from different locations of the weld. There was no certain trend noted through the bending results. All three specimens showed dimpled fracture, which is the characterization of the ductile fracture.

scholarly journals Mechanical Properties of Friction Stir Welded AA1050-H14 and AA5083-H111 Joint: Sampling Aspect

2019 ◽  
Author(s):  
Velaphi Msomi ◽  
Nontle Mbana
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Aluminium Alloys ◽  
Parameters Optimization ◽  
Welding Parameters ◽  
Friction Stir ◽  
Long Period ◽  
Dissimilar Alloys ◽  
Welding Technique

Welding of dissimilar aluminium alloys has been a challenge for a long period until the discovery of the solid state welding technique called friction stir welding (FSW). The discovery of this technique encouraged different research interests revolving around the optimization of this technique. This involves the welding parameters optimization and this optimization is categorized into two classes i.e. similar alloys and dissimilar alloys. This paper reports about the mechanical properties of the friction stir welded dissimilar AA1050-H14 and AA5083-H111 joint. The main focus is to compare the mechanical properties of specimens extracted from different locations of the welds i.e. the beginning, middle and the end of the weld. The specimen extracted at the beginning of the weld showed low tensile properties compared to specimens extracted from different locations of the weld. There was no certain trend noted through the bending results. All three specimens showed dimpled fracture which is the characterization of the ductile fracture.

The Use of Bobbin Tools for Friction Stir Welding of Aluminium Alloys

2010 ◽  
Vol 638-642 ◽  
pp. 1179-1184 ◽  
Author(s):  
Philip L. Threadgill ◽  
M.M.Z. Ahmed ◽  
Jonathan P. Martin ◽  
Jonathan G. Perrett ◽  
Bradley P. Wynne
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Friction Stir Welding ◽  
Cross Section ◽  
Axial Force ◽  
Aluminium Alloys ◽  
Processing Parameters ◽  
Machine Design ◽  
Friction Stir ◽  
Triangular Zone

The use of a double sided friction stir welding tool (known as a bobbin tool) has the advantage of giving a processed zone in the workpiece which is more or less rectangular in cross section, as opposed the triangular zone which is more typically found when conventional friction stir welding tool designs are used. In addition, the net axial force on the workpiece is almost zero, which has significant beneficial implications in machine design and cost. However, the response of these tools in generating fine microstructures in the nugget area has not been established. The paper presents detailed metallographic analyses of microstructures produced in 25mm AA6082-T6 aluminium wrought alloy, and examines grain size, texture and mechanical properties as a function of processing parameters and tool design, and offers comparison with data from welds made with conventional tools.

scholarly journals Fabrication of AA7075 Hybrid Green Metal Matrix Composites by Friction Stir Processing Technique

2020 ◽  
Vol 44 (4) ◽  
pp. 295-300
Author(s):  
Sanjay Kumar ◽  
Ashish Kumar Srivastava ◽  
Rakesh Kumar Singh
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Research Work ◽  
Processing Technique ◽  
Matrix Composites ◽  
Avant Garde ◽  
Friction Stir ◽  
Surface Composites ◽  
Tool Tilt Angle

Friction stir processing is an avant-garde technique of producing new surface composite or changing the different properties of a material through intense, solid-state localized material plastic deformation. This change in properties depends upon the deformation formed by inserting a non-consumable revolving tool into the workpiece and travels laterally through the workpiece. This research work highlights the effect of process parameters on mechanical properties of fabricated surface composites by friction stir processing. By using various reinforcing materials like Ti, SiC, B4C, Al2O3 with waste elements like waste eggshells, rice husks, coconut shell and coir will be used to fabricate the green composites which are environmentally friendly and reduces the problem of decomposition. The parameter for this experiment is considered as the reinforcing materials, tool rotation speed and tool tilt angle. The SiC/Al2O3/Ti along with eggshell are selected asreinforcement materials. The main effect of the reinforcement is to improve mechanical properties, like hardness, impact strength and strength. The results revealed that the process parameters significantly affect the mechanical properties of friction stir processed surface composites.

Sign in / Sign up

Export Citation Format

Share Document