scholarly journals Revisiting and Enlisting Important QTLs Identified in Frech Bean (Phaseolus vulgaris L.): A Review

Author(s):  
Sandeep Kaur Dhaliwal ◽  
Pooja Salaria ◽  
Prashant Kaushik

French bean (Phaseolus vulgaris L.) a member of family Leguminosae is a useful source of protein (∼22%), minerals (folate), vitamins and fibre. Abiotic and biotic stresses are the constraints to high yield and production of French bean. Varieties reluctant to diseases as well as abiotic stresses is among the top breeding objectives for the French bean. Mendelian ratios could know the genetically reliable forms of resistance, whereas it's more robust to understand the intricate kinds, often referred to as quantitative trait loci (QTL). Here, we review and compile the information from the studies related to the identification of QTLs for critical biofortification traits, biotic and abiotic stresses in French bean. Successful map-based cloning requires QTLs represent single genes which could be isolated in near-isogenic lines, and also the genotypes could be unambiguously inferred by progeny testing. Overall, this information will be useful for directing the French bean breeders to select a suitable method for the inheritance evaluation of quantitative traits and determining the novel genes in germplasm resources to ensure that much more potential of genetic information may be uncovered.

Author(s):  
T.M. Neethu ◽  
Nagarajappa Adivappar ◽  
V. Srinivasa ◽  
G.K. Girijesh

Background: French bean (Phaseolus vulgaris L.) is an important and widely grown leguminous vegetable. The area under this crop in protected cultivation is increasing due to its high yield and remunerative price. There is scanty of information on pacing and nutrients for fertigation under protected cultivation. Hence the experiment was carried out to determine the effect of spacing and fertigation on growth and yield parameters in French bean under naturally ventilated polyhouse during Kharif 2018 at Zonal Agricultural and Horticultural Research Station, Navile, Shivamogga.Methods: The experiment was laid out in split plot design with three replications. There were 18 treatment combinations comprised of three different spacing treatments and six fertigation treatments. Result: Among all the treatments significantly highest number of primary branches (8.70) and secondary branches (8.50) at 45 days after sowing (DAS), number of pods plant-1 (220.20), pod length (20.66 cm), pod girth (2.95 cm) and pod weight (17.69g) were recorded in the treatment combination with 60 × 75cm with 44:70:53 kg ha-1 + mulching + micronutrient spray. The least number of primary branches (4.27), secondary branches (4.50), number of pods plant-1 (160.33), pod length (15.61cm), pod girth (1.75 cm) and pod weight (13.88g) were observed in the treatment combination with 60 × 45 cm spacing with 33:52.5:39.75 kg of N:P:K kg ha-1. The higher plant height at 45 DAS (480.50 cm) and yield (13.06 t) for 1000 m-2 was found in treatment combination 60 × 45cm with 44:70:53 kg ha-1 + mulching + micronutrient spray (S3T4). It was concluded from the study that, the closer spacing (60 × 45cm) with the combination of 44:70:53 kg ha-1 (N:P:K), mulching and micronutrient spray resulted in higher pod yield (13.06 t) 1000m-2.


2020 ◽  
Vol 20 (1) ◽  
Author(s):  
Chunhua Chen ◽  
Xueqian Chen ◽  
Jing Han ◽  
Wenli Lu ◽  
Zhonghai Ren

Abstract Background Cucumber (Cucumis sativus L.) is an economically important vegetable crop species. However, it is susceptible to various abiotic and biotic stresses. WRKY transcription factors play important roles in plant growth and development, particularly in the plant response to biotic and abiotic stresses. However, little is known about the expression pattern of WRKY genes under different stresses in cucumber. Results In the present study, an analysis of the new assembly of the cucumber genome (v3.0) allowed the identification of 61 cucumber WRKY genes. Phylogenetic and synteny analyses were performed using related species to investigate the evolution of the cucumber WRKY genes. The 61 CsWRKYs were classified into three main groups, within which the gene structure and motif compositions were conserved. Tissue expression profiles of the WRKY genes demonstrated that 24 CsWRKY genes showed constitutive expression (FPKM > 1 in all samples), and some WRKY genes showed organ-specific expression, suggesting that these WRKYs might be important for plant growth and organ development in cucumber. Importantly, analysis of the CsWRKY gene expression patterns revealed that five CsWRKY genes strongly responded to both salt and heat stresses, 12 genes were observed to be expressed in response to infection from downy mildew and powdery mildew, and three CsWRKY genes simultaneously responded to all treatments analysed. Some CsWRKY genes were observed to be induced/repressed at different times after abiotic or biotic stress treatment, demonstrating that cucumber WRKY genes might play different roles during different stress responses and that their expression patterns vary in response to stresses. Conclusions Sixty-one WRKY genes were identified in cucumber, and insight into their classification, evolution, and expression patterns was gained in this study. Responses to different abiotic and biotic stresses in cucumber were also investigated. Our results provide a better understanding of the function of CsWRKY genes in improving abiotic and biotic stress resistance in cucumber.


2015 ◽  
Vol 49 (4) ◽  
pp. 227-232
Author(s):  
F Noor ◽  
F Hossain ◽  
U Ara

Eleven genotypes of french bean (Phaseolus vulgaris L.) were screened to select a suitable one which could provide optimum yield of fresh pod, dry seed and biochemical parameters. The maximum seed yield in french bean was found in case of genotype BB-9 (2.96 t/ha) and BARI bush bean -1 (2.95 t/ha), while that of minimum was found in BB-11(1.64 t/ha). However, maximum fresh pod yield (14.25 t/ha) was found for BARI bush bean -1, followed by BARI bush bean -2 (13.23t/ha). BARI bush bean -1 required the minimum time of 88.33 days while BB-3 the maximum of 110.00 days to attain 90% pods maturity. The highest number of diseased plants were observed in BB- 5 (30.33%) and the lowest were in BARI bush bean -1 (7.33%). No significant difference (P< 0.05) in maximum protein content among the studied genotypes was observed, for example BB-15 (21.60%) and BARI bush bean -1 (21.57%). Maximum crude fiber (5.53%) was obtained from BARI bush bean -1, followed by BB-6 (5.50%), BB-20 (5.50%) and BB-5 (5.47%), which all were statistically similar. Among all the genotypes, BARI bush bean -1 showed highest yield and superior quality of french bean. DOI: http://dx.doi.org/10.3329/bjsir.v49i4.22625 Bangladesh J. Sci. Ind. Res. 49(4), 227-232, 2014


2020 ◽  
Author(s):  
Chunhua Chen ◽  
Xueqian Chen ◽  
Jing Han ◽  
Wenli Lu ◽  
Zhonghai Ren

Abstract Background: Cucumber ( Cucumis sativus L.) is an economically important vegetable crop species. However, it is susceptible to various abiotic and biotic stresses. WRKY transcription factors play important roles in plant growth and development, particularly in the plant response to biotic and abiotic stresses. However, little is known about the expression pattern of WRKY genes under different stresses in cucumber. Results: In the present study, an analysis of the new assembly of the cucumber genome (v3.0) allowed the identification of 61 cucumber WRKY genes. Phylogenetic and synteny analyses were performed using related species to investigate the evolution of the cucumber WRKY genes. The 61 CsWRKYs were classified into three main groups, within which the gene structure and motif compositions were conserved. Tissue expression profiles of the WRKY genes demonstrated that 24 CsWRKY genes showed constitutive expression (FPKM > 1 in all samples), and some WRKY genes showed organ-specific expression, suggesting that these WRKYs might be important for plant growth and organ development in cucumber. Importantly, analysis of the CsWRKY gene expression patterns revealed that 7 CsWRKY genes strongly responded to both salt and heat stresses, 12 genes were observed to be expressed in response to infection from downy mildew and powdery mildew, and three CsWRKY genes simultaneously responded to all treatments analysed. Some CsWRKY genes were observed to be induced/repressed at different times after abiotic or biotic stress treatment, demonstrating that cucumber WRKY genes might play different roles during different stress responses and that their expression patterns vary in response to stresses. Conclusions: Sixty-one WRKY genes were identified in cucumber, and insight into their classification, evolution, and expression patterns was gained in this study. Responses to different abiotic and biotic stresses in cucumber were also investigated. Our results provide a better understanding of the function of Cs WRKY genes in improving abiotic and biotic stress resistance in cucumber.


Author(s):  
Aswini Nunavath ◽  
K. Gopala Krishna Murthy ◽  
Venkatraman Hegde ◽  
S. Madhusudan Reddy

Chickpea is one of the most important pulse crop cultivated across the globe which is conventionally a low-input crop that is being cultivated mostly in moisture deficient rainfed environments during post-rainy season. The crop is being severely affected with various biotic and abiotic stresses among which, drought and heat stress are considered as serious constraints limiting chickpea productivity in sub-tropical regions. Several strategies were adopted to enhance the productivity under drought and heat stress environments among which, the development of early flowering varieties is one of the key strategies gaining importance in recent past. Some of the early / super early varieties like ICCV 2, JG 11, JG 14, KAK 2, JAKI 9218, ICCV 96029 and ICCV 96030 were developed during the last three decades. One of the most significant milestones in breeding for early varieties is the identification of four genes efl-1, efl-2, efl-3 and efl-4 governing early flowering by using various lines viz., ICCV 2, ICCV 96029, ICC 5810, BGD 132 and ICC 16641. Several QTLs controlling time of flowering were also mapped on linkage groups LG1, LG2, LG3, LG4, LG5, LG6 and LG8. The information on inheritance of time of flowering, correlation between early flowering with other yield attributing traits like number of pods per plant, number of seeds per pod, seed size, 100-seed weight, identified QTLs for early flowering and abiotic and biotic stresses tolerance may be useful for developing early maturing varieties that posses tolerance to various abiotic stresses by using different conventional and biotechnological approaches.


2020 ◽  
Vol 7 (2) ◽  
pp. 81-84
Author(s):  
Prajwal P. Dongare ◽  
Prashant R. Shingote ◽  
Narsing D. Parlawar

Chitosan is a second most abundant naturally occurring polysaccharide after cellulose derived from chitin which commercially produced from seafood shells, fungi (Aspergillus and mucus) and also from algae by alkaline deacetylation of chitin. It is bio adhesive, biocompatible, biodegradable, organic molecule. Chitosan has wide spread application in agriculture. Chitosan acts as bio-stimulant which upon application to plants stimulates photosynthetic rate, enhances antioxidant production, increases tolerance to biotic and abiotic stresses. Chitosan causes hydrolysis of peptidoglycan of microbes resulting to death of microbes. Recent studies have shown that chitosan induces mechanisms in plants against various biotic and abiotic stresses and helps in formation of barriers that enhances plant's productivity.This paper takes a closer look at the genesis, structural alteration and physiological responses of chitosan foliar applications on plants.As, Abiotic stresses is an important multidimensional environment stresses that damage plant’s physiology, biochemical propertIes and Molecular traits. Chitosan help to combat abiotic and biotic stresses.


2021 ◽  
Vol 10 (1) ◽  
pp. 456-475
Author(s):  
Efat Zohra ◽  
Muhammad Ikram ◽  
Ahmad A. Omar ◽  
Mujahid Hussain ◽  
Seema Hassan Satti ◽  
...  

Abstract In the present era, due to the increasing incidence of environmental stresses worldwide, the developmental growth and production of agriculture crops may be restrained. Selenium nanoparticles (SeNPs) have precedence over other nanoparticles because of the significant role of selenium in activating the defense system of plants. In addition to beneficial microorganisms, the use of biogenic SeNPs is known as an environmentally friendly and ecologically biocompatible approach to enhance crop production by alleviating biotic and abiotic stresses. This review provides the latest development in the green synthesis of SeNPs by using the results of plant secondary metabolites in the biogenesis of nanoparticles of different shapes and sizes with unique morphologies. Unfortunately, green synthesized SeNPs failed to achieve significant attention in the agriculture sector. However, research studies were performed to explore the application potential of plant-based SeNPs in alleviating drought, salinity, heavy metal, heat stresses, and bacterial and fungal diseases in plants. This review also explains the mechanistic actions that the biogenic SeNPs acquire to alleviate biotic and abiotic stresses in plants. In this review article, the future research that needs to use plant-mediated SeNPs under the conditions of abiotic and biotic stresses are also highlighted.


Sign in / Sign up

Export Citation Format

Share Document