scholarly journals Interfaces Design in Lightweight SiC/TiSi2 Composites Fabricated by Reactive Infiltration Process: Interaction Phenomena between Liquid Si-rich Si-Ti Alloys and Glassy Carbon

2021 ◽  
Author(s):  
Donatella Giuranno ◽  
Sofia Gambaro ◽  
Grzegorz Bruzda ◽  
Rafal Nowak ◽  
Wojciech Polkowski ◽  
...  
Keyword(s):  
Contact Angle ◽  
Glassy Carbon ◽  
Point Of View ◽  
Operating Conditions ◽  
Eutectic Region ◽  
Infiltration Process ◽  
Reactive Infiltration ◽  
Ti Alloys ◽  
Si Content ◽  
First Time

To design properly and optimizate liquid-assisted processes such as reactive infiltration for fabricating light weight and corrosion resistant SiC/TiSi2 composites, the interfacial phenomena taking place when liquid Si-rich Si-Ti alloys are in contact with glassy carbon (GC) were investigated for the first time by wetting tests performed by both the sessile and pendant drop methods at T = 1450°C. Specifically, two different Si-rich Si-Ti alloys were selected, and the obtained results in terms of contact angle values, spreading kinetics, reactivity, and developed interface microstructures were compared with experimental observations previously obtained for the liquid Si-rich Si-Ti eutectics processed under the same operating conditions. The increase of the Si content did not affected the final contact angle values. Contrarily, the final developed microstructure at the interface as well as the spreading kinetics were observed as weakly dependent on the composition. From the practical point of view, Si-Ti alloy compositions with a Si-content falling in the simple eutectic region of the phase diagram might be potentially used as infiltrant materials of C- and SiC-based composites.

scholarly journals Interface Design in Lightweight SiC/TiSi2 Composites Fabricated by Reactive Infiltration Process: Interaction Phenomena between Liquid Si-Rich Si-Ti Alloys and Glassy Carbon

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3746
Author(s):  
Donatella Giuranno ◽  
Sofia Gambaro ◽  
Grzegorz Bruzda ◽  
Rafal Nowak ◽  
Wojciech Polkowski ◽  
...  
Keyword(s):  
Contact Angle ◽  
Glassy Carbon ◽  
Interface Design ◽  
Point Of View ◽  
Operating Conditions ◽  
Eutectic Region ◽  
Infiltration Process ◽  
Reactive Infiltration ◽  
Ti Alloys ◽  
Si Content

To properly design and optimize liquid-assisted processes, such as reactive infiltration for fabricating lightweight and corrosion resistant SiC/TiSi2 composites, the extensive knowledge about the interfacial phenomena taking place when liquid Si-rich Si-Ti alloys are in contact with glassy carbon (GC) is of primary importance. To this end, the wettability of GC by two different Si-rich Si-Ti alloys was investigated for the first time by both the sessile and pendant drop methods at T = 1450 °C. The results obtained, in terms of contact angle values, spreading kinetics, reactivity, and developed interface microstructures, were compared with experimental observations previously obtained for the liquid Si-rich Si-Ti eutectics processed under the same operating conditions. As the main outcome, a different Si content did not seem to affect the final contact angle values. Contrarily, the final developed microstructure at the interface and the spreading kinetics were observed as weakly dependent on the composition. From a practical point of view, Si-Ti alloy compositions with a Si content falling in the simple eutectic region of the Si-Ti phase diagram might be potentially used as infiltrating materials of C- and SiC-based composites.

scholarly journals Interfacial Phenomena between Liquid Si-rich Si-Zr Alloys and Glassy Carbon

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1194
Author(s):  
Donatella Giuranno ◽  
Wojciech Polkowski ◽  
Grzegorz Bruzda ◽  
Artur Kudyba ◽  
Javier Narciso
Keyword(s):  
Glassy Carbon ◽  
Sessile Drop ◽  
Point Of View ◽  
Operating Conditions ◽  
Interfacial Phenomena ◽  
Reactive Infiltration ◽  
Design And Optimization ◽  
Si Content ◽  
First Time ◽  
Zr Alloys

To succeed in the design and optimization of liquid-assisted processes such as reactive infiltration for the fabrication of tailored refractory SiC/ZrSi2 composites, the interfacial phenomena that occur when Si-rich Si-Zr alloys are in contact with glassy carbon (GC) were investigated for the first time by the sessile drop method at T = 1450 °C. Specifically, two different Si-rich Si-Zr alloys were selected, and the obtained results in terms of wettability, spreading kinetics, reactivity, and developed interface microstructures were compared with experimental observations that were previously obtained for the liquid Si-rich, Si-Zr, near-eutectic composition (i.e., Si-10 at.%Zr) that was processed under the same operating conditions. The increase of the Si content only weakly affected the overall phenomena that were observed at the interface. From the practical point of view, this means that even Si-Zr alloys with a higher Si content, with respect to the near eutectic alloy, may be potentially used as infiltrant materials.

scholarly journals Interfacial Phenomena between Liquid Si-Rich Si-Zr Alloys and Glassy Carbon

2020 ◽  
Author(s):  
Donatella Giuranno ◽  
Wojciech Polkowski ◽  
Grzegorz Bruzda ◽  
Artur Kudyba ◽  
Javier Narciso
Keyword(s):  
Glassy Carbon ◽  
Sessile Drop ◽  
Point Of View ◽  
Operating Conditions ◽  
Interfacial Phenomena ◽  
Equilibrium Contact Angle ◽  
Reactive Infiltration ◽  
Si Content ◽  
Key Steps ◽  
Zr Alloys

To design and optimize liquid-assisted processes such as reactive infiltration for fabricating refractory SiC/ZrSi2 composites, basic investigations on the interfacial phenomena occurring when liquid Si-based alloys are in contact with C and SiC substrates, are key steps. Indeed, targeted wettability studies may provide helpful indications for finding the suitable set of operating conditions to succeed the fabrication of composites via the reactive infiltration and for predicting the key influencing mechanisms. The wettability of glassy carbon (GC) by two different Si-rich Si-Zr alloys as a function of the Si-content has been investigated by the sessile drop method at T = 1450°C. The more relevant results obtained in terms of equilibrium contact angle values, spreading kinetics, reactivity and developed interface microstructures are reported in the paper and compared with the behaviour previously observed in the Si-27Zr/GC system. The increase of Si-content only weakly affected the overall phenomena observed at the interface, which from the practical point of view means that even the Si-Zr alloys with higher Si-content, as respect to the eutectic alloy (Si-27Zr), could be potentially used as infiltrant materials.

Thanato-Laboratorien. Theorien von Tod und Sterben und Elias Canettis Buch gegen den Tod

2020 ◽  
Vol 4 (1) ◽  
pp. 67-86
Author(s):  
Elisabeth Heyne
Keyword(s):  
Human Life ◽  
Death And Dying ◽  
Point Of View ◽  
Visual Images ◽  
Elias Canetti ◽  
History Of ◽  
Series Of Experiments ◽  
First Time ◽  
Textual Form ◽  
Or History

AbstractAlthough visual culture of the 21th century increasingly focuses on representation of death and dying, contemporary discourses still lack a language of death adequate to the event shown by pictures and visual images from an outside point of view. Following this observation, this article suggests a re-reading of 20th century author Elias Canetti. His lifelong notes have been edited and published posthumously for the first time in 2014. Thanks to this edition Canetti's short texts and aphorisms can be focused as a textual laboratory in which he tries to model a language of death on experimental practices of natural sciences. The miniature series of experiments address the problem of death, not representable in discourses of cultural studies, system theory or history of knowledge, and in doing so, Canetti creates liminal texts at the margins of western concepts of (human) life, science and established textual form.

A Nabatean port on the Red Sea: note on the pottery finds from al-Qusayr (al-Wajh, Saudi Arabia)

2020 ◽  
Author(s):  
Caroline Durand
Keyword(s):  
Saudi Arabia ◽  
19Th Century ◽  
Red Sea ◽  
Point Of View ◽  
The Other ◽  
Trade Routes ◽  
Other Hand ◽  
Roman Egypt ◽  
Pottery Sherds ◽  
First Time

Al-Qusayr is located 40 km south of modern al-Wajh, roughly 7 km from the eastern Red Sea shore. This site is known since the mid-19th century, when the explorer R. Burton described it for the first time, in particular the remains of a monumental building so-called al-Qasr. In March 2016, a new survey of the site was undertaken by the al-‘Ula–al-Wajh Survey Project. This survey focused not only on al-Qasr but also on the surrounding site corresponding to the ancient settlement. A surface collection of pottery sherds revealed a striking combination of Mediterranean and Egyptian imports on one hand, and of Nabataean productions on the other hand. This material is particularly homogeneous on the chronological point of view, suggesting a rather limited occupation period for the site. Attesting contacts between Mediterranean merchants, Roman Egypt and the Nabataean kingdom, these new data allow a complete reassessment of the importance of this locality in the Red Sea trade routes during antiquity.

Tertiary Nitrification Pilot Plants on Parisian Waste Water

1990 ◽  
Vol 22 (1-2) ◽  
pp. 347-352 ◽  
Author(s):  
C. Paffoni ◽  
B. Védry ◽  
M. Gousailles
Keyword(s):  
Waste Water ◽  
Metropolitan Area ◽  
Fixed Bed ◽  
Point Of View ◽  
Operating Conditions ◽  
Research Center ◽  
Daily Output ◽  
Practical Point ◽  
Fixed Bed Reactors

The Paris Metropolitan area, which contains over eight million inhabitants, has a daily output of about 3 M cu.meters of wastewater, the purification of which is achieved by SIAAP (Paris Metropolitan Area Sewage Service) in both Achères and Valenton plants. The carbon pollution is eliminated from over 2 M cu.m/day at Achères. In order to improve the quality of output water, its tertiary nitrification in fixed-bed reactors has been contemplated. The BIOFOR (Degremont) and BIOCARBONE (OTV) processes could be tested in semi-industrial pilot reactors at the CRITER research center of SIAAP. At a reference temperature of 13°C, the removed load is approximately 0.5 kg N NH4/m3.day. From a practical point of view, it may be asserted that in such operating conditions as should be at the Achères plant, one cubic meter of filter can handle the tertiary nitification of one cubic meter of purified water per hour at an effluent temperature of 13°C.

Ground state molecular parameters of phosphine, PH3, from the simultaneous analysis of the high-resolution infrared, microwave and submillimeterwave spectra

1985 ◽  
Vol 50 (11) ◽  
pp. 2480-2492 ◽  
Author(s):  
Soňa Přádná ◽  
Dušan Papoušek ◽  
Jyrki Kauppinen ◽  
Sergei P. Belov ◽  
Andrei F. Krupnov ◽  
...  
Keyword(s):  
Fourier Transform ◽  
High Resolution ◽  
Ground State ◽  
Unitary Transformation ◽  
Point Of View ◽  
Acoustic Detection ◽  
Molecular Parameters ◽  
Microwave Spectrometer ◽  
Fourier Transform Spectra ◽  
First Time

Fourier transform spectra of the ν2 band of PH3 have been remeasured with 0.0045 cm-1 resolution. Ground state combination differences from these data have been fitted simultaneously with the microwave and submillimeterwave data to determine the ground state spectroscopical parameters of PH3 including the parameters of the Δk = ± 3n interactions. The correlation between the latter parameters has been discussed from the point of view of the existence of two equivalent effective rotational operators which are related by a unitary transformation. The ΔJ = 0, +1, ΔK = 0 (A1 ↔ A2, E ↔ E) rotational transitions in the ν2 and ν4 states have been measured for the first time by using a microwave spectrometer and a radiofrequency spectrometer with acoustic detection.

scholarly journals An exceptionally preserved conulariid from Ordovician erratics of Northern European Lowlands

PalZ ◽  
2021 ◽  
Author(s):  
Consuelo Sendino ◽  
Martin M. Bochmann
Keyword(s):  
Internal Structure ◽  
Late Pleistocene ◽  
Point Of View ◽  
Three Dimensions ◽  
Northern European ◽  
Current Location ◽  
Transport Direction ◽  
First Time ◽  
Erratic Boulder

AbstractA conulariid preserved in three dimensions from Ordovician fluvioglacial erratics of the Northern European Lowlands (North German Plain) is described under open nomenclature. It is assigned to the genus Conularia with similarities to Baltoscandian conulariids. The lithology of the erratic boulder and fauna contained in it provide important information on the origin and transport direction of the sediment preserved in a kame from the Saalian glaciation. This paper deals with the site of origin of the boulder in Baltoscandia analysing the comprised palaeofauna, from a palaeostratigraphic and palaeogeographic point of view, from its deposition in Ordovician times until its arrival at its current location in the Late Pleistocene. It also reveals for the first time the internal structure of the conulariid aperture.

scholarly journals Fractional isospectral and non-isospectral AKNS hierarchies and their analytic methods for N-fractal solutions with Mittag-Leffler functions

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Bo Xu ◽  
Yufeng Zhang ◽  
Sheng Zhang
Keyword(s):  
Spectral Problem ◽  
Fractional Order ◽  
Point Of View ◽  
Adjoint Equations ◽  
Scattering Data ◽  
Bilinear Method ◽  
Soliton Equation ◽  
Scattering Transform ◽  
First Time ◽  
Hirota Bilinear

AbstractAblowitz–Kaup–Newell–Segur (AKNS) linear spectral problem gives birth to many important nonlinear mathematical physics equations including nonlocal ones. This paper derives two fractional order AKNS hierarchies which have not been reported in the literature by equipping the AKNS spectral problem and its adjoint equations with local fractional order partial derivative for the first time. One is the space-time fractional order isospectral AKNS (stfisAKNS) hierarchy, three reductions of which generate the fractional order local and nonlocal nonlinear Schrödinger (flnNLS) and modified Kortweg–de Vries (fmKdV) hierarchies as well as reverse-t NLS (frtNLS) hierarchy, and the other is the time-fractional order non-isospectral AKNS (tfnisAKNS) hierarchy. By transforming the stfisAKNS hierarchy into two fractional bilinear forms and reconstructing the potentials from fractional scattering data corresponding to the tfnisAKNS hierarchy, three pairs of uniform formulas of novel N-fractal solutions with Mittag-Leffler functions are obtained through the Hirota bilinear method (HBM) and the inverse scattering transform (IST). Restricted to the Cantor set, some obtained continuous everywhere but nondifferentiable one- and two-fractal solutions are shown by figures directly. More meaningfully, the problems worth exploring of constructing N-fractal solutions of soliton equation hierarchies by HBM and IST are solved, taking stfisAKNS and tfnisAKNS hierarchies as examples, from the point of view of local fractional order derivatives. Furthermore, this paper shows that HBM and IST can be used to construct some N-fractal solutions of other soliton equation hierarchies.

Sign in / Sign up

Export Citation Format

Share Document