scholarly journals Electroless Ni-P/PTFE Self-Lubricating Composite Thin Films Applied for Medium-carbon Steel Substrate

2017 ◽  
pp. 5464-5482 ◽  
Author(s):  
Hung-Hua Sheu ◽  
Keyword(s):  
Thin Films ◽  
Carbon Steel ◽  
Steel Substrate ◽  
Medium Carbon Steel ◽  
Composite Thin Films ◽  
Medium Carbon ◽  
Electroless Ni

Joining of Diamond Grains to Medium Carbon Steel with Ni-Base Powder during Laser Brazing

2010 ◽  
Vol 455 ◽  
pp. 392-396 ◽  
Author(s):  
Zhi Bo Yang ◽  
Ai Ju Liu ◽  
Jiu Hua Xu
Keyword(s):  
Carbon Steel ◽  
Powder Mixture ◽  
Steel Substrate ◽  
High Strength ◽  
Xrd Analysis ◽  
Medium Carbon Steel ◽  
Interfacial Region ◽  
Medium Carbon ◽  
Energy Dispersion Spectrometer ◽  
Joining Strength

In order to develop new generation brazed Diamond grinding wheels, the joining experiments of Diamond super abrasive grains and medium carbon steel using the powder mixture of Ni-Cr alloy as active brazing alloy are carried out via laser in an argon atmosphere. The relevant characteristics of the special powder mixture, the microstructure of the interfacial region, which are both the key factors for determining the joining strength among the Diamond grains, the filler layer and the steel substrate, are investigated extensively by means of scanning electron microscope (SEM) and energy dispersion spectrometer (EDS), as well X-ray diffraction (XRD) analysis. The formation mechanism of carbide layers was discussed. All the results indicate that high strength bonding between diamond grits and the steel substrate has been successfully realized because the chromium in the Ni-based alloy segregated preferentially to the surface of the diamond to form a chromium-rich reaction product Cr3C2, and the bond between the alloy and the Diamond was established through the reaction product.

scholarly journals The Thermal Conductivity of 8 Yttria Stabilized Zirconia and Mullite Thermal Barrier Coating on Medium Carbon Steel Substrate

2019 ◽  
Vol 9 (1) ◽  
pp. 5886-5892
Keyword(s):  
Thermal Conductivity ◽  
Carbon Steel ◽  
Thermal Barrier Coating ◽  
Steel Substrate ◽  
Medium Carbon Steel ◽  
Yttria Stabilized Zirconia ◽  
Thermal Barrier ◽  
Stabilized Zirconia ◽  
Medium Carbon ◽  
Barrier Coating

Thermal conductivity is one of the main features of a thermal barrier coating (TBC) that is important in making sure that the TBC gives its best functionality to the system. A good TBC has low thermal conductivity, so that the temperature can drop across the coating which allows the system to operate in extremely high temperatures. There are several factors that can influence the thermal conductivity of the TBC such as the type of ceramic material used, the deposition method and the physical features of the TBC itself. For this research, air plasma spray (APS) is used to deposit 8 wt% yttria stabilized zirconia (8YSZ) and mullite on medium carbon steel substrates to study their respective thermal conductivities. The aim here is to develop a heat shield using TBC to protect the electric motor in an electrical turbocompounding system. The characteristics of the deposited TBC such as microstructure, element composition, phases and thermal conductivity are studied. The thermal conductivity is reduced when medium carbon steel substrate deposited with TBC. The thermal conductivity of 8YSZ, mullite and uncoated sample at minute 60 is 0.868 W/mK, 0.903 W/mK and 1.057 W/mK, respectively. Therefore, the deposition of 8YSZ TBC can lower the thermal conductivity of the medium carbon steel heat shield.

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

AISI 1551

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Hand Tools ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

SAE 1037

Alloy Digest ◽  
1979 ◽  
Vol 28 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1026

Alloy Digest ◽  
1976 ◽  
Vol 25 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract SAE 1026 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-60. Producer or source: Carbon steel mills.

AISI 4140

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Steel Mills ◽  
Aisi 4140

Abstract AISI 4140 is a through-hardening chromium-molybdenum medium carbon steel. It is not subject to temper embrittlement. It is recommended for heavy duty service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-18. Producer or source: Alloy steel mills and foundries. Originally published May 1954, revised September 1988.

Sign in / Sign up

Export Citation Format

Share Document