Transmission and Scanning Electron Microscopy of the Accessory Cells and Chorion During Development ofCiona intestinalisType B Embryos and the Impact of Their Removal on Cell Morphology

2015 ◽  
Vol 32 (3) ◽  
pp. 217-222 ◽  
Author(s):  
Helen Thompson ◽  
Sebastian M. Shimeld
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Morphology ◽  
Accessory Cells ◽  
The Impact ◽  
Scanning Electron

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

The Impact Properties of a Polyurethane Composite Filled with Clay

2011 ◽  
Vol 197-198 ◽  
pp. 1100-1103
Author(s):  
Jian Li
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Mechanical Analysis ◽  
Impact Testing ◽  
Impact Properties ◽  
Polyurethane Composite ◽  
The Matrix ◽  
The Impact ◽  
Scanning Electron

A polyurethane/clay (PU/clay) composite was synthesized. The microstructure of the composite was examined by scanning electron microscopy. The impact properties of the composite were characterized by impact testing. The study on the structure of the composite showed that clays could be dispersed in the polymer matrix well apart from a few of clusters. The results from mechanical analysis indicated that the impact properties of the composite were increased greatly in comparison with pure polyurethane. The investigation on the mechanical properties showed that the impact strength could be obviously increased by adding 20 wt% (by weight) clay to the matrix.

scholarly journals Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5734
Author(s):  
Paulina Kosmela ◽  
Jan Suchorzewski ◽  
Krzysztof Formela ◽  
Paweł Kazimierski ◽  
Józef Tadeusz Haponiuk ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Baltic Sea ◽  
Thermal Insulation ◽  
Reference Sample ◽  
Microcomputed Tomography ◽  
Polyurethane Foams ◽  
Relationship Of ◽  
The Impact ◽  
Scanning Electron

In this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume, area, shape and orientation on appearance density and thermal insulation properties of polyurethane foams was determined. The results presented in the paper confirm that microcomputed tomography is a useful tool for relatively quick estimation of polyurethane foams’ microstructure, what is crucial especially in the case of thermal insulation materials.

scholarly journals Effects of Droplet-Vitrification Cryopreservation Based on Physiological and Antioxidant Enzyme Activities ofBrassidiumShooting Star Orchid

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Safrina Rahmah ◽  
Safiah Ahmad Mubbarakh ◽  
Khor Soo Ping ◽  
Sreeramanan Subramaniam
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Liquid Nitrogen ◽  
Enzyme Activities ◽  
Structural Changes ◽  
Total Soluble Protein ◽  
Antioxidant Enzyme Activities ◽  
Droplet Vitrification ◽  
The Impact ◽  
Scanning Electron

Protocorm-like bodies (PLBs) ofBrassidiumShooting Star orchid were successfully cryopreserved using droplet-vitrification method. Vitrification based cryopreservation protocol is comprised of preculture, osmoprotection, cryoprotection, cooling, rewarming, and growth recovery and each and every step contributes to the achievement of successful cryopreservation. In order to reveal the lethal and nonlethal damage produced by cryopreservation, histological observation, scanning electron microscopy (SEM), and biochemical analysis were carried out in both cryopreserved and noncryopreserved PLBs ofBrassidiumShooting Star orchid comparing with the control PLBs stock culture. Histological and scanning electron microscopy analyses displayed structural changes in cryopreserved PLBs due to the impact of cryoinjury during exposure to liquid nitrogen. Total soluble protein significantly increased throughout the dehydration process and the highest value was achieved when PLBs were stored in liquid nitrogen. Ascorbate peroxidase (APX) and catalase (CAT) showed the highest enzyme activities in both dehydration and cryostorage treatments indicating that stress level of PLBs was high during these stages.

scholarly journals MICRO-MECHANICAL PERFORMANCE OF CONCRETE USED AS RECYCLED RAW MATERIAL IN CEMENTITIOUS COMPOSITE

2017 ◽  
Vol 13 ◽  
pp. 55 ◽  
Author(s):  
Vladimír Hrbek ◽  
Veronika Koudelková ◽  
Zdeněk Prošek ◽  
Pavel Tesárek
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Industrial Pollution ◽  
Mechanical Performance ◽  
Structural Parameters ◽  
Raw Material ◽  
Cementitious Composite ◽  
X Ray ◽  
The Impact ◽  
Scanning Electron

The reduction of industrial pollution is recently one of main goals over all fields. In civil engineering, re-cycling of structural waste provides wide opportunity contributing this effort. This paper focus on re-use of concrete waste, which after further processing can be used in new constructions as partial supplement to the mixture. To investigate the impact of re-cycled concrete addition, it is necessary to determine mechanical and structural parameters of individual phases in the “raw” material. For this purpose, grid indentation and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM, EDX) are combined to determine properties of concrete sample.

The Occurrence of Copper-Psoromic Acid in Lichens From Cupriferous Substrata

1990 ◽  
Vol 22 (3) ◽  
pp. 345-354 ◽  
Author(s):  
O. William Purvis ◽  
John A. Elix ◽  
Kim L. Gaul
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Infrared Absorption ◽  
Electron Probe Microanalysis ◽  
Electron Probe ◽  
The Other ◽  
Infrared Absorption Spectroscopy ◽  
Acid Complex ◽  
The Impact ◽  
Scanning Electron

AbstractThe localization of psoromic acid and copper in partly green, copper-rich specimens of Lecidella bullata and Tephromela testaceoatra collected in Norway was studied by optical microscopy, scanning electron microscopy, and electron probe microanalysis. Infrared absorption spectroscopy of lichen material and of a synthetic copper-psoromic acid complex, and the other techniques, provide evidence that complexing of copper by psoromic acid occurs within specific areas of these lichens and this leads to their unusual colouration. In contrast, a specimen of copper-rich Lecanora cascadensis, which contains psoromic and usnic acids, does not contain such a complex. From the evidence obtained it is suggested that taxonomists should pay attention to the impact of rock and lichen chemistry on the appearance of lichen thalli.

Sign in / Sign up

Export Citation Format

Share Document