scholarly journals The Borborema Strike-Slip Shear Zone System (NE Brazil): Large-Scale Intracontinental Strain Localization in a Heterogeneous Plate

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 6) ◽  
Author(s):  
Sergio P. Neves ◽  
Andréa Tommasi ◽  
Alain Vauchez ◽  
Thais Andressa Carrino
Keyword(s):  
Shear Zone ◽  
Large Scale ◽  
Shear Zones ◽  
Strike Slip ◽  
Northeastern Brazil ◽  
Main Stage ◽  
Plate Boundaries ◽  
Deformation Localization ◽  
Continental Scale ◽  
Dextral Shear

Abstract Large-scale strike-slip faults are fundamental tectonic elements of the continental lithosphere. They constitute plate boundaries (continental transforms), separate terranes with contrasting geological histories within accretionary orogens, or accommodate heterogeneous deformation in intracontinental settings. In ancient orogens, where deeper levels of the crust are exposed, these faults are expressed as shear zones materialized by up to tens of km-wide mylonitic belts. The Borborema shear zone system in northeastern Brazil is one of the largest and best-exposed intracontinental strike-slip shear zone systems in the world, cropping out over 250,000 km2. Here, we review its main geophysical, structural, petrologic, and geochronologic characteristics and discuss the factors controlling its development. This complex continental scale shear zone system is composed of a set of NE- to NNE-trending dextral shear zones from which there are two major E-trending dextral shear zones with horse-tail terminations into the transpressional belt branch, as well as several smaller E-trending dextral and NE-trending dextral and sinistral shear zones. The major shear zones are marked by extensive linear or curvilinear magnetic gradients, implying their continuation at depth. The major shear zones are materialized by migmatite to amphibolite-facies mylonites, but the entire system shows evidence of late deformation at lower temperatures. The system developed during the late stages of the Neoproterozoic Brasiliano (Pan-African) orogeny (mainly from 590 to 560 Ma), postdating by more than 20 Ma the main stage of contractional deformation. Localization of strike-slip shearing in this intraplate setting was controlled by rheological contrasts between blocks with distinct Paleoproterozoic histories, the presence of preorogenic Neoproterozoic rifts, the craton geometry, and zones of enhanced magmatic activity, highlighting the importance of rheological heterogeneity in controlling shear zone nucleation and evolution.

Famenno-Carboniferous (370-320 Ma) strike slip tectonics monitored by syn-kinematic plutons in the French Variscan belt (Massif Armoricain and French Massif Central)

2009 ◽  
Vol 180 (3) ◽  
pp. 231-246 ◽  
Author(s):  
Patrick Rolin ◽  
Didier Marquer ◽  
Michel Colchen ◽  
Charles Cartannaz ◽  
Alain Cocherie ◽  
...  
Keyword(s):  
Large Scale ◽  
Western Europe ◽  
Shear Zones ◽  
Strike Slip ◽  
Variscan Belt ◽  
French Massif Central ◽  
Massif Central ◽  
Granite Emplacement ◽  
Regional Deformation ◽  
Dextral Shear

AbstractThe Variscan continental collision has led to the development of large strike-slip shear zones in western Europe. Our study focuses on the regional deformation and shear zone patterns in the Massif Armoricain and the French Massif Central. The synthesis of granite emplacement ages associated to granite deformation fields, allow us to propose a geodynamic model for the tectonic evolution of this part of the Variscan belt between 370 Ma – 320 Ma (Late Devonian – Namurian).After the first steps of the continental subduction-collision, leading to high temperature and anatexis associated with N-S shortening at 380-370 Ma (Frasnian to Famennian), the southern part of the Massif Armoricain and western part of French Massif Central underwent large dextral shearing along N100-N130 trending shear zones up to early Visean time. These large-scale displacements progressively decreased at around 350-340 Ma, during the first emplacements of biotite bearing granites (Moulins-les Aubiers-Gourgé massif and Guéret massif intrusions).During middle Visean times, the shortening axis direction rotated towards a NNE-SSW direction implying changes in the regional deformation field. The occurrence of N070-N100 sinistral and N110-N130 dextral conjugate shear zones within leucogranites are related to that time. Finally, new N150-N160 dextral shear zones appeared in middle to late Visean times: as for examples, the Parthenay and the Pradines shear zones in the SE Massif Armoricain and the Millevaches massif, respectively. These shear zones were conjugated to the sinistral N020 Sillon Houiller in the French Massif Central. They reflect large scale brittle continental indentation in the French Variscan belt during the middle to late Visean.

Large-scale interseismic deformation along the Altyn Tagh Fault determined from Sentinel-1 InSAR

2021 ◽  
Author(s):  
Lin Shen ◽  
Andy Hooper ◽  
John Elliott ◽  
Tim Wright
Keyword(s):  
Velocity Field ◽  
Tibetan Plateau ◽  
Shear Zone ◽  
Large Scale ◽  
Slip Rate ◽  
Shear Zones ◽  
Elastic Half Space ◽  
Strike Slip ◽  
Space Model ◽  
Altyn Tagh

<p>The 1600 km-long Altyn Tagh Fault (ATF) is a major intra-continental strike-slip fault along the Northern Tibetan Plateau, the slip rate of which has significant implications for our understanding of the present-day tectonic processes of the Tibetan Plateau region. We present an interseismic velocity field along ~1500 km length of the fault, derived from Sentinel-1 interferograms spanning the period between late 2014 and 2019. It is the first time such a large-scale analysis has been carried out for this fault with Interferometric Synthetic Aperture Radar (InSAR).</p><p>Using a modified elastic half-space model, we find significant strain accumulation along the 1500 km length of the ATF, at a relatively fast rate of ~10 mm/yr and quite localised along the fault. The results indicate an eastward decrease of the slip rate along the fault from 11.6 ± 1.0 mm/yr to 7.5 ± 1.2 mm/yr over the western portion to the central portion, whereas it increases again to 11.1 ± 1.1 mm/yr over the eastern portion. Furthermore, the results suggest that no significant creeping occurs along the fault.</p><p>We find a high slip rate of 11.5 ± 1.0 mm/yr along the south-western segment of the ATF, a region not typically covered by previous studies, is transferred to the structurally linked left-lateral strike-slip Longmu-Gozha Co Fault. It demonstrates that the generation of the NS-trending normal faulting events in this region, such as the 2008 Mw 7.2 Yutian earthquake, is ascribed to the EW-trending extensional stress at the Ashikule step-over zone between the two left-lateral faults. We also find a high surface shear strain rate greater than 0.4 μstrain/yr in this region, which could be caused by the stress loading effects of the recent seismic activities.</p><p>To investigate the pattern of strain localisation along the ATF, we fit a shear zone model to the derived long-term InSAR velocity field. Inverting for shear zone width reveals two broad shear zones along the ATF, where the strain is distributed over multiple strands rather than concentrated on a single narrow strand. The broad shear zones explain the high estimates of the locking depth found when using the elastic half-space model and also off-fault seismic activity on the strands away from the ATF in these areas. The results also show a relatively wider shear zone from the central portion eastward, where the ATF breaks into three parallel strands. </p><p>This study suggests that a slip deficit of around 1 m has been accumulated along the ATF over the last century, and indicates that the fault is capable of rupturing with the potential for a magnitude 7.5 or larger earthquake.</p>

scholarly journals Migmatite and leucogranite in a continental-scale exhumed strike-slip shear zone: Implications for tectonic evolution and initiation of shearing

2021 ◽  
Author(s):  
Junyu Li ◽  
Shuyun Cao ◽  
Xuemei Cheng ◽  
Franz Neubauer ◽  
Haobo Wang ◽  
...  
Keyword(s):  
Shear Zone ◽  
Thermal State ◽  
Shear Zones ◽  
Strike Slip ◽  
Red River ◽  
Crustal Anatexis ◽  
Plate Convergence ◽  
Continental Scale ◽  
Geological Processes ◽  
Lower Crustal

Plutons within continental strike-slip shear zones bear important geological processes on late-stage plate transpression and continent-continent collision and associated lateral block extrusion. Where, when, and how intrusions and shearing along transpressional strike-slip shear zones respond to plate interactions, however, are often debated. In this study, we investigated migmatite associated leucogranite and pegmatite from the exhumed >1000-km-long Ailao Shan-Red River left-lateral strike-slip shear zone in Southeast Asia that was active during India-Eurasia plate convergence. Most zircons from the migmatites and leucogranitic intrusions present inherited core-rim structure. The depletion of rare earth element patterns and positive Eu anomalies suggest that leucosomes and leucogranites are the result of crustal anatexis. Zircon rims from the foliated migmatites and leucogranites record U-Pb ages of 41−28 Ma, revealing the timing of the Cenozoic crustal anatexis event along this strike-slip shear zone. Ages of the magmatic zircons from the unfoliated pegmatites provide the timing of the termination of a high-temperature tectono-thermal event and ductile left-lateral shearing at 26−23 Ma. The Cenozoic crustal anatexis along the Ailao Shan-Red River strike-slip shear zone indicates that thickened crust underneath the shear zone involved previously subducted crust. We propose that the Cenozoic thermal state has an important effect on the crustal anatexis and thus on the rheological behavior of the lithosphere by thermal weakening, which plays an essential role in localizing the initiation of the deep-seated lower-crustal shear zone.

scholarly journals Kinematics and Geochronology of Late Paleozoic–Early Mesozoic Ductile Deformation in the Alxa Block, NW China: New Constraints on the Evolution of the Central Asian Orogenic Belt

Lithosphere ◽  
2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Beihang Zhang ◽  
Jin Zhang ◽  
Heng Zhao ◽  
Junfeng Qu ◽  
Yiping Zhang ◽  
...  
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Strike Slip ◽  
Late Paleozoic ◽  
Ductile Shear Zone ◽  
Early Mesozoic ◽  
Central Asian ◽  
Ductile Shear Zones ◽  
Dextral Shear ◽  
Ductile Shear

Abstract Strike-slip faults are widely developed throughout the Central Asian Orogenic Belt (CAOB), one of the largest Phanerozoic accretionary orogenic collages in the world, and may have played a key role in its evolution. Recent studies have shown that a large number of Late Paleozoic–Early Mesozoic ductile shear zones developed along the southern CAOB. This study reports the discovery of a NW–SE striking, approximately 500 km long and up to 2 km wide regional ductile shear zone in the southern Alxa Block, the Southern Alxa Ductile Shear Zone (SADSZ), which is located in the central part of the southern CAOB. The nearly vertical mylonitic foliation and subhorizontal stretching lineation indicate that the SADSZ is a ductile strike-slip shear zone, and various kinematic indicators indicate dextral shearing. The zircon U-Pb ages and the 40Ar/39Ar plateau ages of the muscovite and biotite indicate that the dextral ductile shearing was active during Middle Permian to Middle Triassic (ca. 269–240 Ma). The least horizontal displacement of the SADSZ is constrained between ca. 40 and 50 km. The aeromagnetic data shows that the SADSZ is in structural continuity with the coeval shear zones in the central and northern Alxa Block, and these connected shear zones form a ductile strike-slip duplex in the central part of the southern CAOB. The ductile strike-slip duplex in the Alxa Block, including the SADSZ, connected the dextral ductile shear zones in the western and eastern parts of the southern CAOB to form a 3000 km long E-W trending dextral shear zone, which developed along the southern CAOB during Late Paleozoic to Early Mesozoic. This large-scale dextral shear zone was caused by the eastward migration of the orogenic collages and blocks of the CAOB and indicates a transition from convergence to transcurrent setting of the southern CAOB during Late Paleozoic to Early Mesozoic.

Proterozoic geological evolution of the northern Vestfold Hills, Antarctica

1991 ◽  
Vol 128 (4) ◽  
pp. 307-318 ◽  
Author(s):  
C. W. Passchier ◽  
R. F. Bekendam ◽  
J. D. Hoek ◽  
P. G. H. M. Dirks ◽  
H. de Boorder
Keyword(s):  
Large Scale ◽  
Structural Evolution ◽  
Shear Zones ◽  
Granulite Facies ◽  
Strike Slip ◽  
Amphibolite Facies ◽  
Tectonic Event ◽  
Vestfold Hills ◽  
Two Phases ◽  
Brittle Faulting

AbstractThe presence of polyphase shear zones transected by several suites of dolerite dykes in Archaean basement of the Vestfold Hills, East Antarctica, allows a detailed reconstruction of the local structural evolution. Archaean and early Proterozoic deformation at granulite facies conditions was followed by two phases of dolerite intrusion and mylonite generation in strike-slip zones at amphibolite facies conditions. A subsequent middle Proterozoic phase of brittle normal faulting led to the development of pseudotachylite, predating intrusion of the major swarm of dolerite dykes around 1250 Ma. During the later stages and following this event, pseudotachylite veins were reactivated as ductile, mylonitic thrusts under prograde conditions, culminating in amphibolite facies metamorphism around 1000–1100 Ma. This is possibly part of a large-scale tectonic event during which the Vestfold block was overthrust from the south. In a final phase of strike-slip deformation, several pulses of pseudotachylite-generating brittle faulting alternated with ductile reactivation of pseudotachylite.

Neotectonics and large-scale geomorphology of Canada

1993 ◽  
Vol 17 (2) ◽  
pp. 248-264 ◽  
Author(s):  
John Adams ◽  
John J. Clague
Keyword(s):  
Large Scale ◽  
Late Quaternary ◽  
Strike Slip ◽  
Laurentide Ice Sheet ◽  
Continental Margins ◽  
Plate Boundaries ◽  
The West ◽  
Late Mesozoic ◽  
Tectonic Events ◽  
Mountain Systems

Canada includes active convergent and strike-slip plate boundaries, several major mountain systems, two passive continental margins, and a stable craton. Neotectonic activity, as indicated by earthquake occurrence, is highest along the west coast and lowest in the interior of the country. Correlations between tectonics and physiography are strongest in the west. Here, the landscape bears a strong imprint of convergent and strike-slip plate regimes. Late Mesozoic and early Cenozoic tectonic events established the setting in which the present physiography of western Canada developed, but the landscape acquired its present form much more recently, in Pliocene and Quaternary time. In contrast, the neotectonic imprint in eastern and northern Canada is enigmatic, and although major concentrations of earthquakes in many areas are associated with reactivated, early Phanerozoic structures, there has been only limited late Quaternary faulting. The vast Canadian craton, despite its very low seismicity, is deforming isostatically at a moderate rate due to melting of the Laurentide Ice Sheet thousands of years ago.

Complex kinematics in a major ductile shear zone, NW Shetland: Evidence of ductile extrusion during Caledonian transpression

2021 ◽  
Author(s):  
Timothy Armitage ◽  
Robert Holdsworth ◽  
Robin Strachan ◽  
Thomas Zach ◽  
Diana Alvarez-Ruiz ◽  
...  
Keyword(s):  
Shear Zone ◽  
Hanging Wall ◽  
Regional Scale ◽  
Shear Zones ◽  
White Mica ◽  
Strike Slip ◽  
Amphibolite Facies ◽  
Lateral Extrusion ◽  
Shear Sense ◽  
Ductile Shear

<p>Ductile shear zones are heterogeneous areas of strain localisation which often display variation in strain geometry and combinations of coaxial and non-coaxial deformation. One such heterogeneous shear zone is the c. 2 km thick Uyea Shear Zone (USZ) in northwest Mainland Shetland (UK), which separates variably deformed Neoarchaean orthogneisses in its footwall from Neoproterozoic metasediments in its hanging wall (Fig. a). The USZ is characterised by decimetre-scale layers of dip-slip thrusting and extension, strike-slip sinistral and dextral shear senses and interleaved ultramylonitic coaxially deformed horizons. Within the zones of transition between shear sense layers, mineral lineations swing from foliation down-dip to foliation-parallel in kinematically compatible, anticlockwise/clockwise-rotations on a local and regional scale (Fig. b). Rb-Sr dating of white mica grains via laser ablation indicates a c. 440-425 Ma Caledonian age for dip-slip and strike-slip layers and an 800 Ma Neoproterozoic age for coaxial layers. Quartz opening angles and microstructures suggest an upper-greenschist to lower-amphibolite facies temperature for deformation. We propose that a Neoproterozoic, coaxial event is overprinted by Caledonian sinistral transpression under upper greenschist/lower amphibolite facies conditions. Interleaved kinematics and mineral lineation swings are attributed to result from differential flow rates resulting in vertical and lateral extrusion and indicate regional-scale sinistral transpression during the Caledonian orogeny in NW Shetland. This study highlights the importance of linking geochronology to microstructures in a poly-deformed terrane and is a rare example of a highly heterogeneous shear zone in which both vertical and lateral extrusion occurred during transpression.</p><p><img src="https://contentmanager.copernicus.org/fileStorageProxy.php?f=gepj.0cf6ef44e5ff57820599061/sdaolpUECMynit/12UGE&app=m&a=0&c=d96bb6db75eed0739f2a6ee90c9ad8fd&ct=x&pn=gepj.elif&d=1" alt=""></p>

Exhumation of the crustal-scale Gaoligong strike-slip shear belt in Southeast Asia

2021 ◽  
pp. jgs2021-038
Author(s):  
Yanlong Dong ◽  
Shuyun Cao ◽  
Franz Neubauer ◽  
Haobo Wang ◽  
Wenyuan Li ◽  
...  
Keyword(s):  
Shear Zone ◽  
Early Cretaceous ◽  
Vertical Motion ◽  
Shear Zones ◽  
Strike Slip ◽  
Western Boundary ◽  
The Tibetan Plateau ◽  
Content Type ◽  
Lateral Extrusion ◽  
Supplementary Material

Lateral extrusion of blocks is a well-known geological process during continent–continent collision, which always expresses by either brittle strike-slip faults or ductile shear zones. However, vertical motion along such fault systems remains poorly constrained. The Gaoligong shear zone (GLG-SZ) formed the western boundary of the Indochina block during the India–Eurasia collision, resulting in the exhumation of deep crustal rocks, including a large volume of syntectonic granites. Combined zircon U-Pb dating and 40Ar/39Ar thermochronology revealed that both the unfoliated and foliated granitic intrusions were emplaced during the Early Cretaceous (112–125 Ma), post-magmatic melting occurred from the Early Oligocene (ca. 35 Ma), and subsequent cooling during the Middle Miocene (ca. 13 Ma). The average emplacement depth of Early Cretaceous samples revealed that at least 15 km of hangingwall of the GLG-SZ must have been removed by vertical motion during shearing. Syn-shearing exhumation underlines the role of the lateral motion of the shear zone initiation by magma-assisted rheological weakening and exhumation at high ambient temperatures within the shear zone. A new model links magmatic channel flow underneath the Tibetan Plateau with magma intrusions and the high geothermal gradients along the shear belts, such as the GLG-SZ.Supplementary material:https://doi.org/10.6084/m9.figshare.c.5598365

Kinematic data on major Variscan strike-slip faults and shear zones in the Polish Sudetes, northeast Bohemian Massif

1997 ◽  
Vol 134 (5) ◽  
pp. 727-739 ◽  
Author(s):  
P. ALEKSANDROWSKI ◽  
R. KRYZA ◽  
S. MAZUR ◽  
J. ŻABA
Keyword(s):  
Shear Zone ◽  
Fault Zone ◽  
Bohemian Massif ◽  
Early Carboniferous ◽  
Shear Zones ◽  
Strike Slip ◽  
Late Carboniferous ◽  
Late Devonian ◽  
The West ◽  
West Sudetes

The still highly disputable terrane boundaries in the Sudetic segment of the Variscan belt mostly seem to follow major strike-slip faults and shear zones. Their kinematics, expected to place important constraints on the regional structural models, is discussed in some detail. The most conspicuous is the WNW–ESE Intra-Sudetic Fault Zone, separating several different structural units of the West Sudetes. It showed ductile dextral activity and, probably, displacement magnitude of the order of tens to hundreds kilometres, during late Devonian(?) to early Carboniferous times. In the late Carboniferous (to early Permian?), the sense of motion on the Intra-Sudetic Fault was reversed in a semi-brittle to brittle regime, with the left-lateral offset on the fault amounting to single kilometres. The north–south trending Niemcza and north-east–southwest Skrzynka shear zones are left-lateral, ductile features in the eastern part of the West Sudetes. Similarly oriented (northeast–southwest to NNE–SSW) regional size shear zones of as yet undetermined kinematics were discovered in boreholes under Cenozoic cover in the eastern part of the Sudetic foreland (the Niedźwiedź and Nysa-Brzeg shear zones). One of these is expected to represent the northern continuation of the major Stare Mesto Shear Zone in the Czech Republic, separating the geologically different units of the West and East Sudetes. The Rudawy Janowickie Metamorphic Unit, assumed in some reconstructions to comprise a mostly strike-slip terrane boundary, is characterized by ductile fabric developed in a thrusting regime, modified by a superimposed normal-slip extensional deformation. Thrusting-related deformational fabric was locally reoriented prior to the extensional event and shows present-day strike-slip kinematics in one of the sub-units. The Sudetic Boundary Fault, although prominent in the recent structure and topography of the region, was not active as a Variscan strike-slip fault zone. The reported data emphasize the importance of syn-orogenic strike-slip tectonics in the Sudetes. The recognized shear sense is compatible with a strike-slip model of the northeast margin of the Bohemian Massif, in which the Kaczawa and Góry Sowie Units underwent late Devonian–early Carboniferous southeastward long-distance displacement along the Intra-Sudetic Fault Zone from their hypothetical original position within the Northern Phyllite Zone and the Mid-German Crystalline High of the German Variscides, respectively, and were juxtaposed with units of different provenance southwest of the fault. The Intra-Sudetic Fault Zone, together with the Elbe Fault Zone further south, were subsequently cut in the east and their eastern segments were displaced and removed by the younger, early to late Carboniferous, NNE–SSW trending, transpressional Moldanubian–Stare Mesto Shear Zone.

Striding-Athabasca mylonite zone: Complex Archean deep-crustal deformation in the East Athabasca mylonite triangle, northern Saskatchewan

1994 ◽  
Vol 31 (8) ◽  
pp. 1287-1300 ◽  
Author(s):  
Simon Hanmer ◽  
Randy Parrish ◽  
Michael Williams ◽  
Chris Kopf
Keyword(s):  
Flow Pattern ◽  
Shear Zone ◽  
Crustal Deformation ◽  
Principal Axis ◽  
Shear Zones ◽  
Granulite Facies ◽  
Strike Slip ◽  
Tectonic Zone ◽  
Early Proterozoic ◽  
Lower Deck

The geophysically defined Snowbird tectonic zone is manifested in northernmost Saskatchewan as a deep-crustal, multistage mylonitic structure, the East Athabasca mylonite triangle. The triangle, located at the northeastern apex of a stiff, crustal-scale "lozenge," is composed of mid-Archean annealed mylonites and late Archean ribbon mylonites, formed during two granulite facies events (850–1000 °C, 1.0 GPa). The flow pattern in the mylonites is geometrically and kinematically complex, and corresponds to that expected adjacent to the apex of a stiff elliptical volume subjected to subhorizontal regional extension parallel to its principal axis. The late Archean mylonites are divided into an upper structural deck, entirely occupied by a dip-slip shear zone, and an underlying lower deck. The latter is divided into two upright conjugate strike-slip shear zones, separated by a low-strain septum, which deformed by progressive coaxial flow. The flow pattern in the mid-Archean mylonites is compatible with that of the late Archean mylonites, and suggests that the crustal-scale lozenge influenced deformation since the mid-Archean. In the interval ca. 2.62–2.60 Ga, deformation in the upper and lower decks evolved from a granulite facies pervasive regime to a more localized amphibolite facies regime. With further cooling, deformation was localized within very narrow greenschist mylonitic faults at the lateral limits of the lower deck. By the late Archean, the East Athabasca mylonite triangle was part of a deep-crustal, intracontinental shear zone. This segment of the Snowbird tectonic zone was not the site of an Early Proterozoic suture or orogen.

Sign in / Sign up

Export Citation Format

Share Document