scholarly journals Late Cretaceous to Paleogene post-obduction extension and subsequent Neogene compression in the Oman Mountains

GeoArabia ◽  
2006 ◽  
Vol 11 (4) ◽  
pp. 17-40 ◽  
Author(s):  
Marc Fournier ◽  
Claude Lepvrier ◽  
Philippe Razin ◽  
Laurent Jolivet

ABSTRACT After the obduction of the Semail ophiolitic nappe onto the Arabian Platform in the Late Cretaceous, north Oman underwent several phases of extension before being affected by compression in the framework of the Arabia-Eurasia convergence. A tectonic survey, based on structural analysis of fault-slip data in the post-nappe units of the Oman Mountains, allowed us to identify major events of the Late Cretaceous and Cenozoic tectonic history of northern Oman. An early ENE-WSW extensional phase is indicated by synsedimentary normal faults in the Upper Cretaceous to lower Eocene formations. This extensional phase, which immediately followed ductile extension and exhumation of high-pressure rocks in the Saih Hatat region of the Oman Mountains, is associated with large-scale normal faulting in the northeast Oman margin and the development of the Abat Basin. A second extensional phase, recorded in lower Oligocene formations and only documented by minor structures, is characterized by NNE (N20°E) and NW (N150°E) oriented extensions. It is interpreted as the far-field effect of the Oligocene-Miocene rifting in the Gulf of Aden. A late E-W to NE-SW directed compressional phase started in the late Oligocene or early Miocene, shortly after the collision in the Zagros Mountains. It is attested by folding, and strike-slip and reverse faulting in the Cenozoic series. The direction of compression changed from ENE-WSW in the Early Miocene to almost N-S in the Pliocene.

10.1144/m54.3 ◽  
2021 ◽  
Vol 54 (1) ◽  
pp. 49-60 ◽  
Author(s):  
Andreas Scharf ◽  
Frank Mattern ◽  
Mohammed Al-Wardi ◽  
Gianluca Frijia ◽  
Daniel Moraetis ◽  
...  

AbstractThis chapter is concerned with the main faults and folds within the Southeastern Oman Mountains based on available literature. The main, best and most widely exposed thrusts are those related to the SW-directed late Cretaceous obduction of the allochthonous nappes onto the Arabian platform and margin. These thrusts are related to obduction of rocks, which had formed hundreds of kilometres offshore Oman. The thrusts were active from the Cenomanian to the Campanian. Obduction-related thrusts and folds are spectacularly exposed within the rocks of the Arabian platform in the eastern part of the Saih Hatat Dome, including large-scale recumbent cylindrical folds and sheath folds. At least six fold sets can be studied in the Southeastern Oman Mountains. At least two of them had formed prior to obduction and are exposed in the Pre-Permian formations of the Jabal Akhdar Dome. At least three fold sets formed in the course of obduction, while at least one fold set is postobductional in age. Besides the compressional structures, the Oman Mountains expose major post-obductional extensional faults, mostly at the margins of the Jabal Akhdar and Saih Hatat domes. The throw of these faults amounts to a few to several kilometres. Finally, this chapter provides an overview of the enigmatic Batinah Mélange which consists of slivers of Hawasina rocks, resting (unusually) structurally above the Semail Ophiolite.


1962 ◽  
Vol S7-IV (5) ◽  
pp. 760-773 ◽  
Author(s):  
Claude Grandjacquet

Abstract A large view of the evolution and structural history of the Tyrrhenian sea and bordering areas suggests that towards the end of the Permian distensions occurring in the western Mediterranean resulted in the opening of a passage to the Atlantic. Lower Eocene deformations along the Sicilian-Tunisian front were either due to local marginal disequilibrium or to the northern drift of the African continent. Oligocene emergence is evident in the Apennines and in Calabria through the existence of widespread hiatuses and by bauxitic and ferruginous beds. Large scale Oligocene movements brought the African continent to its maximum proximity with Europe. It was in the same period that the clay scaglia and flysch nappes began sliding in Tuscany although the movement of Calabrian nappes in southern Italy did not occur until the lower and middle Miocene.


1991 ◽  
Vol 31 (1) ◽  
pp. 143 ◽  
Author(s):  
D.C. Lowry ◽  
I.M. Longley

The tectonic history of the northern flank of the offshore Gippsland Basin can be divided into three phases:an Early Cretaceous rift phase (120-98 Ma) with deposition of the Strzelecki Group and extension in a northeast-southwest direction.a mid-Cretaceous phase (98-80 Ma) with deposition of the Golden Beach Group and extension in a northwest- southeast direction anda Late Cretaceous to Tertiary sag phase with intermittent compression or wrenching.Previous workers have described the first and third phases. This paper argues for a distinctive second phase with extension at right angles to the first phase. The complex Cretaceous structure in the Kipper-Hammerhead area is interpreted in terms of a model in which transfer faults of the first phase became domino faults of the second phase.


Author(s):  
S.S. Hanna ◽  
J.D. Smewing

Melanges and debris flows with clasts derived from the top of the Natih Formation found in shales in the base of the Aruma Group indicate that a period of Structural growth on the platform took place during Aruma deposition in the Late Cretaceous. In this respect the platform in the Jebel Salakh area may have undergone a similar period of structural growth in the Late Cretaceous to the Fahud area where a syn-Aruma normal fault down throwing to the South accounts for a difference in the stratigraphic thickness of the Aruma of 1 km. A younger series of debris flows in the Aruma of the Sufrat al Khays area to the South of Jehel Salakh is dated as Campanian/Maastrichtian. The clasts in these flows were derived exclusively from the Simsima limestones. Natih-derived elasts are conspicuously absent. This is taken to indicate that the Madamar-Salakh Qusaybah range was covered by Aruma sediments at this time and did not form the distinctive positive feature seen at present - i.e. Madamar-Salakh-Qusaybah range folding though partly Late Cretaceous is mainly Post-Manslrichtian in age. This Post Maastrichtian event in the Madamar-Salakh-Qusaybah range produced a series of doubly-plunging anticlines in the Cretaceous strata- These folds show a high degree of brittle extension in the form of normal faults and extensional fractures, The faults are delineated by fault gouge with visibly interconnected void space. In the subsurface, if such fractures were developed in a fold closure similar to those seen at the surface in the Madamar-Salakh-Qusaybah range. then they could provide preferred conduits for oil flow and the harrier to fluid flow provided by the Aruma shale seal could lead to a hydrocarbon accumulation.


2019 ◽  
Vol 89 (10) ◽  
pp. 1039-1054 ◽  
Author(s):  
Zhicai Zhu ◽  
Qingguo Zhai ◽  
Peiyuan Hu ◽  
Sunlin Chung ◽  
Yue Tang ◽  
...  

ABSTRACT The closure of the Bangong–Nujiang Tethyan Ocean (BNTO) and consequent Lhasa–Qiangtang collision is vital to reasonably understanding the early tectonic history of the Tibetan Plateau before the India-Eurasia collision. The timing of the Lhasa–Qiangtang collision was mainly constrained by the ophiolite and magmatic rocks in previous studies, with only limited constraints from the sedimentary rocks within and adjacent to the Bangong–Nujiang suture zone. In the middle segment of the Bangong–Nujiang suture zone, the Duoni Formation, consisting of a fluvial delta sequence with minor andesite interlayers, was originally defined as the Late Cretaceous Jingzhushan Formation and interpreted as the products of the Lhasa–Qiangtang collision during the Late Cretaceous. Our new zircon U-Pb data from two samples of andesite interlayers demonstrate that it was deposited during the latest Early Cretaceous (ca. 113 Ma) rather than Late Cretaceous. Systemic studies on the sandstone detrital model, heavy-mineral assemblage, and clasts of conglomerate demonstrate a mixed source of both Lhasa and Qiangtang terranes and ophiolite complex. Clasts of conglomerate contain abundant angular peridotite, gabbro, basalt, chert, andesite, and granite, and minor quartzite and gneiss clasts also exist. Sandstones of the Duoni Formation are dominated by feldspathic–lithic graywacke (Qt25F14L61 and Qm13F14L73), indicative of a mixture of continental-arc and recycled-orogen source origin. Detrital minerals of chromite, clinopyroxene, epidote, and hornblende in sandstone also indicate an origin of ultramafic and mafic rocks, while garnets indicate a metamorphosed source. Paleocurrent data demonstrate bidirectional (southward and northward) source origins. Thus, we suggest that the deposition of the Duoni Formation took place in the processes of the Lhasa–Qiangtang collision during the latest Early Cretaceous (∼ 113 Ma), and the BNTO had been closed by this time.


10.1144/m54.5 ◽  
2021 ◽  
Vol 54 (1) ◽  
pp. 67-103
Author(s):  
Andreas Scharf ◽  
Frank Mattern ◽  
Mohammed Al-Wardi ◽  
Gianluca Frijia ◽  
Daniel Moraetis ◽  
...  

AbstractThe tectonic evolution of the Oman Mountains as of the Neoproterozoic begins with a major extensional event, the Neoproterozoic Abu Mahara rifting. It was followed by the compressional Nabitah event, still during the Neoproterozoic, in Oman but possibly not in the study area. During the earliest Cambrian, the Jabal Akhdar area was affected by the Cadomian Orogeny, marked by NE--SW shortening. It is unclear, whether the Saih Hatat area was exposed to the Cadomian deformation, too. Still during the lower Cambrian, the Angudan Orogeny followed, characterized by NW--SE shortening. An episode of rifting affected the Saih Hatat area during the mid-Ordovician. During the mid-Carboniferous, both dome areas were deformed by tilting and large-scale open folding in the course of the ‘Hercynian’ event. As a consequence, a major unconformity formed. As another Late Paleozoic event, the Permian break-up of Pangaea and subsequent formation of the Hawasina ocean basin, are recorded in the Southeastern Oman Mountains. As a result, a passive margin formed which existed until the mid-Cretaceous, characterized by deposition of mostly shelfal carbonates. This interval of general tectonic quiescence was interrupted during the early Jurassic by uplift and tilting of the Arabian Platform. The platform collapsed during the late Cretaceous, related to the arrival of the obducted allochthonous nappes including the Semail Ophiolite, transforming the passive margin to an active margin.The Semail Ophiolite formed most likely above a subduction zone within the Neo-Tethys Ocean during the Cenomanian while parts of the Arabian Plate were subducted to the NE. Formation of oceanic lithosphere and SW-thrusting was broadly coeval, resulting in ophiolite obduction onto the Hawasina Basin. The Semail Ophiolite and the Hawasina rocks combined were thrust further onto the Arabian Plate. Their load created a foreland basin and forebulge within the Arabian Platform. Once the continental lithosphere of the Arabian Platform was forced into the subduction zone, a tear between the dense oceanic lithosphere and the buoyant continental lithosphere developed. This led to rapid uplift and exhumation of subducted continental lithosphere of the Saih Hatat area, while obduction was still going on, causing in multiple and intense folding/thrusting within the eastern Saih Hatat Dome. Exhumation of the Saih Hatat Dome was massive. The emplacement of the ophiolite was completed during the Campanian/Maastrichtian. For completeness, we also present alternative models for the developmental history of the Semail Ophiolite.Immediately after emplacement, the Arabian lithosphere underwent intense top-to-the-NE extensional shearing. Most of the Saih Hatat Dome was exhumed during the latest Cretaceous to Early Eocene, associated with major extensional shearing at its flanks. Further convergence during the late Eocene to Miocene resulted in exhumation of the Jabal Akhdar Dome and some gentle exhumation of the Saih Hatat Dome, shaping the present-day Southeastern Oman Mountains. In the coastal area, east and SE of the Saih Hatat Dome, some late Cretaceous to present-day uplift is evident by, e.g., uplifted marine terraces. The entire Oman Mountains are uplifting today, which is evident by the massive wadi incision into various rock units, including wadi deposits which may form overhangs.


2020 ◽  
Author(s):  
Nalan Lom ◽  
Abdul Qayyum ◽  
Douwe J.J. van Hinsbergen

<p>Iran is a mosaic of continental blocks that are surrounded by Palaeo-Tethyan and Neo-Tethyan oceanic relics. Remnants of the ophiolitic rock assemblages are exposed around the Central Iranian Microcontinent (CIM), discretely along the Sanandaj-Sirjan Zone and in Jaz-Murian. The Present-day “ring” distribution of the Iranian ophiolites is not straightforwardly explained by a simple subduction zone architecture. One of the key features to solve the Iranian puzzle is the CIM which is surrounded by Sabzevar ophiolites in the north (99-77 Ma), Birjand-Nehbandan ophiolites in the east (~110 Ma) and Inner Zagros ophiolites in south-southwest (~103-94 Ma). The CIM consists of three major fault bounded sub-blocks, from east to west, Lut, Tabas, and Yazd. They represent an Atlantic-type continental margin that began rifting in Permo-Triassic as a result of opening of Neotethys Ocean. Subsequent convergence in Cretaceous to Paleogene time close the ocean basins around the CIM and emplaced the ophiolites onto the passive margins. Neogene Arabia-Eurasia collision induced replacement structures e.g., strike‐slip reactivation of normal faults that were associated with major block rotations.</p><p>We aim to kinematically restore the opening and closure history of the ocean basins found as ophiolitic relics around the CIM. Key in our analysis is the Doruneh and Great Kavir faults of Central Iran that continues into northern Afghanistan as the Herat Fault. Present-day GPS velocity vector measurements and deformation pattern show a NE-SW orientated shortening in Iran. Structural analysis of the Doruneh Fault indicates slip sense inversion before ~5 Ma. This observation is consistent with the deactivation of the dextral Herat Fault. Pre-Pliocene dextral movement in excess of 500 km along the Doruneh and Great Kavir faults may kinematically accommodate a major counter-clockwise rotation (~65<span>o</span>) of the CIM since the late Jurassic that has been inferred based on previous palaeomagnetic studies. This enables the transport of the Jandaq ophiolite from Aghdarband in the north to Anarak region of Central Iran and, duplication of curved Birjand-Nehbandan ophiolites in Sistan suture. If correct, this may imply that the closure history of the Central Iranian basins is directly connected to the large-scale Cretaceous to Paleogene extrusion tectonics in western Tibet and Hindu Kush regions. This preliminary study shows restoration of the post-Mesozoic deformation is essential to reconstruct the suture zones and pre-collisional setting in Iran, Afghanistan, and Pakistan.</p>


2019 ◽  
Vol 157 (2) ◽  
pp. 149-159
Author(s):  
Jacob W.D. Strong ◽  
Alan P. Dickin

AbstractTo properly understand the tectonic history of the Grenville Province it is necessary to have a reliable, scientifically based understanding of the present-day three-dimensional (3D) structure of the orogen. Based on detailed Nd isotope mapping of surface boundaries and Lithoprobe seismic sections, this study provides the first detailed visualization of the 3D structure of the Grenville gneiss belt in Ontario using the SketchUp software package. The 3D visualization supports a model in which thrust geometry was imposed from the top downwards, controlled by the NW boundary of the Central Metasedimentary Belt that originated as a failed back-arc rift zone. The Central Metasedimentary Belt boundary controlled the trajectory of the Allochthon Boundary Thrust, its underlying tectonic duplex and, ultimately, the Grenville Front. This process of superimposed thrusting explains the large-scale change in the trajectory of the Grenville Front north of Georgian Bay that has been called the ‘Big Bend’. To assist in visualizing the 3D model, a fly-through animation is provided in the supplementary material.


Sign in / Sign up

Export Citation Format

Share Document