EDFM-based Multi-Continuum Shale Gas Simulation with Low Velocity Non-Darcy Water Flow Effect

2021 ◽  
Author(s):  
Yu Jiang ◽  
John Killough ◽  
Linkai Li ◽  
Xiaona Cui ◽  
Jin Tang
Keyword(s):  
Water Flow ◽  
Shale Gas ◽  
Gas Flow ◽  
Early Stage ◽  
Knudsen Diffusion ◽  
Gas Production ◽  
Darcy Flow ◽  
Low Velocity ◽  
Water Imbibition ◽  
The Impact

Abstract The exploitation of shale gas has attracted extensive attention in industry and academia. Multi-scale gas transportation mechanisms in matrix and fractures have been well studied. However, due to the presence of water originating from both fracking fluids and connate water, shale gas production is also greatly affected by water imbibition and flowback, of which the processes have not been thoroughly analyzed. This paper aims at presenting a comprehensive multi-continuum multi-component model to characterize the complicated shale gas flow behaviors as well as the impact of non-Darcy water flow on shale gas production. A two-phase numerical simulator is built up with multi-continuum settings. Shale matrix is split into organic and inorganic matters while natural and hydraulic fractures are modeled using an embedded discrete fracture model (EDFM). Fracture closure and elongation are modeled using a dynamic gridding approach. Different transportation mechanisms are considered to describe gas flow in shale, including Knudsen diffusion, ab/desorption, and convection. The low-velocity non-Darcy flow of water is used in inorganic pores to analyze the effect of water flow. A pre-stage model based on pumping history is simulated firstly before production starts. This serves as an initialization step to model fracking fluid imbibition and early-stage water flowback. This pre-stage simulation gives out more precise pressure and saturation profiles than the conventional non-equilibrium initialization method, especially in enhanced pore volumes and fractures. Based upon simulation results from the production period, Langmuir isotherm absorption has shown a massive impact on gas flow in shale, and Knudsen diffusion weights highest among transport mechanisms. Water non-Darcy flow better benefits in simulating both early-stage water flowback and production process compared with Darcy flow, which gives us a new explanation on the low flowback efficiency in real shale gas operations. Studies on early-stage water flowback also show that the flowback affects saturation distribution, which has a strong relationship with gas production and shall not be ignored. This work establishes a novel method to simulate and analyze shale gas production. It considers multiple and complex flow mechanisms and gives out better estimates of water flux. It is also used to initialize a model for pumping water imbibition and early-stage flowback, which can be used as technical resources for analyzing and simulating unconventional plays.

scholarly journals Numerical Simulation of Shale Gas Multiscale Seepage Mechanism-Coupled Stress Sensitivity

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Xun Yan ◽  
Jing Sun ◽  
Dehua Liu
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Gas Transport ◽  
Sensitivity Coefficient ◽  
Stress Sensitivity ◽  
Gas Production ◽  
Molecular Flow ◽  
Adsorption Phenomenon ◽  
Gas Seepage ◽  
The Impact

The complexity of the gas transport mechanism in microfractures and nanopores is caused by the feature of multiscale and multiphysics. Figuring out the flow mechanism is of great significance for the efficient development of shale gas. In this paper, an apparent permeability model which covers continue, slip, transition, and molecular flow and geomechanical effect was presented. Additionally, a mathematical model comprising multiscale, geomechanics, and adsorption phenomenon was proposed to characterize gas flow in the shale reservoir. The aim of this paper is to investigate some important impacts in the process of gas transportation, which includes the shale stress sensitivity, adsorption phenomenon, and reservoir porosity. The results reveal that the performance of the multistage fractured horizontal well is strongly influenced by stress sensitivity coefficient. The cumulative gas production will decrease sharply when the shale gas reservoir stress sensitivity coefficient increases. In addition, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity; however, the effect of adsorption is very weak in the early gas transport period, and the impact of later will increase. Moreover, shale porosity also greatly affects the shale gas transportation.

scholarly journals The Impact of the Geometry of the Effective Propped Volume on the Economic Performance of Shale Gas Well Production

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2475
Author(s):  
Andres Soage ◽  
Ruben Juanes ◽  
Ignasi Colominas ◽  
Luis Cueto-Felgueroso
Keyword(s):  
Shale Gas ◽  
Economic Performance ◽  
Gas Flow ◽  
Gas Production ◽  
Gas Industry ◽  
Well Production ◽  
Relative Contribution ◽  
Decline Curves ◽  
Technological Developments ◽  
The Impact

We analyze the effect that the geometry of the Effective Propped Volume (EPV) has on the economic performance of hydrofractured multistage shale gas wells. We study the sensitivity of gas production to the EPV’s geometry and we compare it with the sensitivity to other parameters whose relevance in the production of shale gas is well known: porosity, kerogen content and permeability induced in the Stimulated Recovery Volume (SRV). To understand these sensitivities, we develop a high-fidelity 3D numerical model of shale gas flow that allows determining both the Estimated Ultimate Recovery (EUR) of gas as well as analyzing the decline curves of gas production (DCA). We find that the geometry of the EPV plays an important role in the economic performance and gas production of shale wells. The relative contribution of EPV geometry is comparable to that of induced permeability of the SRV or formation porosity. Our results may lead to interesting technological developments in the oild and gas industry that improve economic efficiency in shale gas production.

A NEW FRACTAL TRANSPORT MODEL OF SHALE GAS RESERVOIRS CONSIDERING MULTIPLE GAS TRANSPORT MECHANISMS, MULTI-SCALE AND HETEROGENEITY

Fractals ◽  
2018 ◽  
Vol 26 (06) ◽  
pp. 1850096 ◽  
Author(s):  
WEIPENG FAN ◽  
HAI SUN ◽  
JUN YAO ◽  
DONGYAN FAN ◽  
KAI ZHANG
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Knudsen Diffusion ◽  
Gas Production ◽  
Transport Mechanisms ◽  
Apparent Permeability ◽  
Multi Scale ◽  
Inorganic Systems ◽  
Inorganic Matter ◽  
Fractal Characteristics

Duo to different transport mechanisms and gas storage in organic and inorganic systems, a new triple-continuum model coupling Discrete Fracture Model (DFM) was established to investigate gas flow in shale gas reservoir. Considering the multi-scale and heterogeneity of shale matrix, fractal theory was used to calculate the apparent permeability of organic and inorganic systems while multiple gas transport mechanisms such as viscous flow, Knudsen diffusion, surface diffusion, gas absorption/desorption effect and real gas effect were incorporated. This coupled mathematical model was solved by Finite Element Method (FEM) and the presented fractal apparent permeability model was validated with the experimental data. The results show that fractal characteristics of shale matrix have great impact on gas reservoir performance. The model without considering the influence of fractal characteristics could lead to underestimate gas production by approximately 17%. Viscous flow is the dominate transport mechanisms of shale gas and Knudsen diffusion has an impact on gas flow when the pressure declines. Surface diffusion should be only considered in organic systems and can be ignored. Then the results of sensitivity analysis show that the characteristic parameters of inorganic matter have a greater impact than those of organic matter and establishing a triple-continuum model with considering comprehensive effect of organic and inorganic matter is necessary. In addition, gas production would decrease as the pore fractal dimension and tortuosity fractal dimension increase, which results from the increasing number of small pores and more tortuous path for gas flow.

scholarly journals Investigation of the Main Factors During Shale-gas Production Using Grey Relational Analysis

2016 ◽  
Vol 9 (1) ◽  
pp. 207-215 ◽  
Author(s):  
Hongling Zhang ◽  
Jing Wang ◽  
Haiyong Zhang
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Fracture Conductivity ◽  
Matrix Permeability ◽  
Shale Gas Reservoirs ◽  
Main Factors ◽  
Grey Relational ◽  
The Impact ◽  
Half Length

Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity,etc) have high uncertainty that may cause unexpected high cost. Therefore, to develop an efficient and practical method for quantifying uncertainty and optimizing shale-gas production is highly desirable. This paper focuses on analyzing the main factors during gas production, including petro-physical parameters, hydraulic fracture parameters, and work conditions on shale-gas production performances. Firstly, numerous key parameters of shale-gas production from the fourteen best-known shale gas reservoirs in the United States are selected through the correlation analysis. Secondly, a grey relational grade method is used to quantitatively estimate the potential of developing target shale gas reservoirs as well as the impact ranking of these factors. Analyses on production data of many shale-gas reservoirs indicate that the recovery efficiencies are highly correlated with the major parameters predicted by the new method. Among all main factors, the impact ranking of major factors, from more important to less important, is matrix permeability, fracture conductivity, fracture density of hydraulic fracturing, reservoir pressure, total organic content (TOC), fracture half-length, adsorbed gas, reservoir thickness, reservoir depth, and clay content. This work can provide significant insights into quantifying the evaluation of the development potential of shale gas reservoirs, the influence degree of main factors, and optimization of shale gas production.

Formation Pressure Analysis of Water-Bearing Tight Gas Reservoirs with Unsteady Low-Velocity Non-Darcy Flow

2011 ◽  
Vol 201-203 ◽  
pp. 399-403 ◽  
Author(s):  
Hong Qing Song ◽  
Ming Yue ◽  
Wei Yao Zhu ◽  
Dong Bo He ◽  
Huai Jian Yi
Keyword(s):  
Liquid Flow ◽  
Gas Flow ◽  
Darcy Flow ◽  
Tight Gas ◽  
Formation Pressure ◽  
Low Velocity ◽  
Gas Reservoirs ◽  
Tight Gas Reservoirs ◽  
Calculation Results ◽  
Pressure Analysis

Porous media containing water is the prerequisite of existence of threshold pressure gradient (TPG) for gas flow. Based on theory of fluid mechanics in porous medium considering TPG, the non-Darcy flow mathematical model is established for formation pressure analysis of water-bearing tight gas reservoirs. It could provide semi-analytic solution of unsteady radial non-Darcy flow. According to the solution of unsteady radial non-Darcy flow, an easy and accurate calculation method for formation pressure analysis is presented. It can provide theoretical foundation for development design of water-bearing tight gas reservoirs. The analysis of calculation results demonstrates that the higher TPG is, the smaller formation pressure of water-bearing tight gas reservoirs spreads. In the same output, the reservoir sweep of non-Darcy gas flow is larger than that of non-Darcy liquid flow. And the pressure drop near wellbore is smaller than that of non-Darcy liquid flow, which is different from Darcy flow.

Diffusion-Based Modeling of Gas Transport in Organic-Rich Ultratight Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-26
Author(s):  
Zizhong Liu ◽  
Hamid Emami-Meybodi
Keyword(s):  
Diffusion Coefficient ◽  
Adsorption Capacity ◽  
Surface Diffusion ◽  
Diffusion Coefficients ◽  
Gas Transport ◽  
Knudsen Diffusion ◽  
Gas Production ◽  
Hydrocarbon Transport ◽  
The Impact ◽  
And Storage

Summary The complex pore structure and storage mechanism of organic-rich ultratight reservoirs make the hydrocarbon transport within these reservoirs complicated and significantly different from conventional oil and gas reservoirs. A substantial fraction of pore volume in the ultratight matrix consists of nanopores in which the notion of viscous flow may become irrelevant. Instead, multiple transport and storage mechanisms should be considered to model fluid transport within the shale matrix, including molecular diffusion, Knudsen diffusion, surface diffusion, and sorption. This paper presents a diffusion-based semianalytical model for a single-component gas transport within an infinite-actingorganic-rich ultratight matrix. The model treats free and sorbed gas as two phases coexisting in nanopores. The overall mass conservation equation for both phases is transformed into one governing equation solely on the basis of the concentration (density) of the free phase. As a result, the partial differential equation (PDE) governing the overall mass transport carries two newly defined nonlinear terms; namely, effective diffusion coefficient, De, and capacity factor, Φ. The De term accounts for the molecular, Knudsen, and surface diffusion coefficients, and the Φ term considers the mass exchange between free and sorbed phases under sorption equilibrium condition. Furthermore, the ratio of De/Φ is recognized as an apparent diffusion coefficient Da, which is a function of free phase concentration. The nonlinear PDE is solved by applying a piecewise-constant-coefficient technique that divides the domain under consideration into an arbitrary number of subdomains. Each subdomain is assigned with a constant Da. The diffusion-based model is validated against numerical simulation. The model is then used to investigate the impact of surface and Knudsen diffusion coefficients, porosity, and adsorption capacity on gas transport within the ultratight formation. Further, the model is used to study gas transport and production from the Barnett, Marcellus, and New Albany shales. The results show that surface diffusion significantly contributes to gas production in shales with large values of surface diffusion coefficient and adsorption capacity and small values of Knudsen diffusion coefficient and total porosity. Thus, neglecting surface diffusion in organic-rich shales may result in the underestimation of gas production.

scholarly journals Prediction of Production Performance of Refractured Shale Gas Well considering Coupled Multiscale Gas Flow and Geomechanics

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-21 ◽  
Author(s):  
Zhiqiang Li ◽  
Zhilin Qi ◽  
Wende Yan ◽  
Zuping Xiang ◽  
Xiang Ao ◽  
...  
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Knudsen Diffusion ◽  
Stress Sensitivity ◽  
Production Performance ◽  
Design Parameters ◽  
Production Loss ◽  
Apparent Permeability ◽  
Gas Well ◽  
The Matrix

Production simulation is an important method to evaluate the stimulation effect of refracturing. Therefore, a production simulation model based on coupled fluid flow and geomechanics in triple continuum including kerogen, an inorganic matrix, and a fracture network is proposed considering the multiscale flow characteristics of shale gas, the induced stress of fracture opening, and the pore elastic effect. The complex transport mechanisms due to multiple physics, including gas adsorption/desorption, slip flow, Knudsen diffusion, surface diffusion, stress sensitivity, and adsorption layer are fully considered in this model. The apparent permeability is used to describe the multiple physics occurring in the matrix. The model is validated using actual production data of a horizontal shale gas well and applied to predict the production and production increase percentage (PIP) after refracturing. A sensitivity analysis is performed to study the effects of the refracturing pattern, fracture conductivity, width of stimulated reservoir volume (SRV), SRV length of new and initial fractures, and refracturing time on production and the PIP. In addition, the effects of multiple physics on the matrix permeability and production, and the geomechanical effects of matrix and fracture on production are also studied. The research shows that the refracturing design parameters have an important influence on the PIP. The geomechanical effect is an important cause of production loss, while slippage and diffusion effects in matrix can offset the production loss.

The impact of kerogen properties on shale gas production: A reservoir simulation sensitivity analysis

2017 ◽  
Vol 48 ◽  
pp. 13-23 ◽  
Author(s):  
Shihao Wang ◽  
Andrew E. Pomerantz ◽  
Wenyue Xu ◽  
Alexander Lukyanov ◽  
Robert L. Kleinberg ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Shale Gas ◽  
Reservoir Simulation ◽  
Gas Production ◽  
The Impact

scholarly journals Emerging unconventional shale plays in Western Australia

2013 ◽  
Vol 53 (1) ◽  
pp. 313 ◽  
Author(s):  
K. Ameed R. Ghori
Keyword(s):  
Shale Gas ◽  
Early Stage ◽  
Marcellus Shale ◽  
Gas Production ◽  
Source Rocks ◽  
Lower Permian ◽  
Upper Ordovician ◽  
Canning Basin ◽  
The Us ◽  
Gas Potential

Production of shale gas in the US has changed its position from a gas importer to a potential gas exporter. This has stimulated exploration for shale-gas resources in WA. The search started with Woodada Deep–1 (2010) and Arrowsmith–2 (2011) in the Perth Basin to evaluate the shale-gas potential of the Permian Carynginia Formation and the Triassic Kockatea Shale, and Nicolay–1 (2011) in the Canning Basin to evaluate the shale-gas potential of the Ordovician Goldwyer Formation. Estimated total shale-gas potential for these formations is about 288 trillion cubic feet (Tcf). Other petroleum source rocks include the Devonian Gogo and Lower Carboniferous Laurel formations of the Canning Basin, the Lower Permian Wooramel and Byro groups of the onshore Carnarvon Basin, and the Neoproterozoic shales of the Officer Basin. The Canning and Perth basins are producing petroleum, whereas the onshore Carnarvon and Officer basins are not producing, but they have indications for petroleum source rocks, generation, and migration from geochemistry data. Exploration is at a very early stage, and more work is needed to estimate the shale-gas potential of all source rocks and to verify estimated resources. Exploration for shale gas in WA will benefit from new drilling and production techniques and technologies developed during the past 15 years in the US, where more than 102,000 successful gas production wells have been drilled. WA shale-gas plays are stratigraphically and geochemically comparable to producing plays in the Upper Ordovician Utica Shale, Middle Devonian Marcellus Shale and Upper Devonian Bakken Formation, Upper Mississippian Barnett Shale, Upper Jurassic Haynesville-Bossier formations, and Upper Cretaceous Eagle Ford Shale of the US. WA is vastly under-explored and emerging self-sourcing shale plays have revived onshore exploration in the Canning, Carnarvon, and Perth basins.

Sign in / Sign up

Export Citation Format

Share Document