Average Fracture Compressibility from Flowback Data

2021 ◽  
pp. 1-14
Author(s):  
Sabbir Hossain ◽  
Obinna Ezulike ◽  
Yingkun Fu ◽  
Hassan Dehghanpour
Keyword(s):  
Single Phase ◽  
Material Balance ◽  
Hydraulic Fractures ◽  
Water Production ◽  
Type Curves ◽  
Decline Curves ◽  
Initial Fracture ◽  
Flowing Material ◽  
Water Rate ◽  
Phase Water

Summary We propose a novel method for estimating average fracture compressibility cf¯ during flowback process and apply it to flowback data from 10 multifractured horizontal wells completed in Woodford (WF) and Meramec (MM) formations. We conduct complementary diagnostic flow-regime analyses and calculate cf¯ by combining a flowing-material-balance (FMB) equation with pressure-normalized-rate (PNR)-decline analysis. Flowback data of these wells show up to 2 weeks of single-phase water production followed by hydrocarbon breakthrough. Plots of water-rate-normalized pressure and its derivative show pronounced unit slopes, suggesting boundary-dominated flow (BDF) of water in fractures during single-phase flow. Water PNR decline curves follow a harmonic trend during single-phase- and multiphase-flow periods. Ultimate water production from the forecasted harmonic trend gives an estimate of initial fracture volume. The cf¯ estimates for these wells are verified by comparing them with the ones from the Aguilera (1999) type curves for natural fractures and experimental data. The results show that our cf¯ estimates (4 to 22×10−5 psi−1) are close to the lower limit of the values estimated by previous studies, which can be explained by the presence of proppants in hydraulic fractures.

scholarly journals Flowing Material Balance and Rate-Transient Analysis of Horizontal Wells in Under-Saturated Coal Seam Gas Reservoirs: A Case Study from the Qinshui Basin, China

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4887
Author(s):  
Suyang Zhu ◽  
Alireza Salmachi
Keyword(s):  
Transient Analysis ◽  
Horizontal Well ◽  
Material Balance ◽  
Production Data ◽  
Coal Seam Gas ◽  
Two Phase ◽  
Rate Transient Analysis ◽  
Flowing Material ◽  
Phase Water ◽  
Water Gas

Two phase flow and horizontal well completion pose additional challenges for rate-transient analysis (RTA) techniques in under-saturated coal seam gas (CSG) reservoirs. To better obtain reservoir parameters, a practical workflow for the two phase RTA technique is presented to extract reservoir information by the analysis of production data of a horizontal well in an under-saturated CSG reservoir. This workflow includes a flowing material balance (FMB) technique and an improved form of two phase (water + gas) RTA. At production stage of a horizontal well in under-saturated CSG reservoirs, a FMB technique was developed to extract original water in-place (OWIP) and horizontal permeability. This FMB technique involves the application of an appropriate productivity equation representing the relative position of the horizontal well in the drainage area. Then, two phase (water + gas) RTA of a horizontal well was also investigated by introducing the concept of the area of influence (AI), which enables the calculation of the water saturation during the transient formation linear flow. Finally, simulation and field examples are presented to validate and demonstrate the application of the proposed techniques. Simulation results indicate that the proposed FMB technique accurately predicts OWIP and coal permeability when an appropriate productivity equation is selected. The field application of the proposed methods is demonstrated by analysis of production data of a horizontal CSG well in the Qinshui Basin, China.

A Simple Method for Quantifying Inter-Well Communication Using Production Data from Single-Phase Shale Gas Reservoirs

2021 ◽  
Author(s):  
Hamidreza Hamdi ◽  
Hamid Behmanesh ◽  
Christopher R. Clarkson
Keyword(s):  
Numerical Simulation ◽  
Shale Gas ◽  
Analytical Method ◽  
Single Phase ◽  
Material Balance ◽  
Production Data ◽  
Hydraulic Fractures ◽  
Gas Reservoirs ◽  
Simple Method ◽  
Shale Gas Reservoirs

Abstract Hydraulic fracture/reservoir properties and fluid-in-place can be quantified by using rate-transient analysis (RTA) techniques applied to flow rates/pressures gathered from multi-fractured horizontal wells (MFHWs) completed in unconventional reservoirs. These methods are commonly developed for the analysis of production data from single wells without considering communication with nearby wells. However, in practice, wells drilled from the same pad can be in strong hydraulic communication with each other. This study aims to develop the theoretical basis for analyzing production data from communicating MFHWs completed in single-phase shale gas reservoirs. A simple and practical semi-analytical method is developed to quantify the communication between wells drilled from the same pad by analyzing online production data from the individual wells. This method is based on the communicating tanks model and employs the concepts of macroscopic material balance and the succession of pseudo-steady states. A set of nonlinear ordinary differential equations (ODEs) are generated and solved simultaneously using the efficient Adams-Bashforth-Moulton algorithm. The accuracy of the solutions is verified against robust numerical simulation. In the first example provided, a MFHW well-pair is presented where the wells are communicating through primary hydraulic fractures with different communication strengths. In the subsequent examples, the method is extended to consider production data from a three-well and a six-well pad with wine-rack-style completions. The developed model is flexible enough to account for asynchronous wells that are producing from distinct reservoir blocks with different fracture/rock properties. For all the studied cases, the semi-analytical method closely reproduces the results of fully numerical simulation. The results demonstrate that, in some cases, when new wells start to produce, the production rates of existing wells can drop significantly. The amount of productivity loss is a direct function of the communication strengths between the wells. The new method can accurately quantify the communication strength between wells through transmissibility multipliers between the hydraulic fractures that are adjusted to match individual well production data. In this study, a new simple and efficient semi-analytical method is presented that can be used to analyze online production data from multiple wells drilled from a pad simultaneously with minimal computation time. The main advantage of the developed method is its scalability, where additional wells can be added to the system very easily.

Production Data Analysis of Coalbed-Methane Wells

2008 ◽  
Vol 11 (02) ◽  
pp. 311-325 ◽  
Author(s):  
Christopher R. Clarkson ◽  
Colin L. Jordan ◽  
Roger R. Gierhart ◽  
John P. Seidle
Keyword(s):  
Data Analysis ◽  
Coalbed Methane ◽  
Single Phase ◽  
Material Balance ◽  
Pressure Data ◽  
Single Phase Flow ◽  
Two Phase ◽  
Type Curves ◽  
Production Type ◽  
Permeability Changes

Summary Recent advances in production data analysis (PDA) techniques have greatly assisted engineers in extracting meaningful reservoir and stimulation information from well-production and flowing-pressure data. Application of these techniques to coalbed-methane (CBM) reservoirs requires the unique coal storage and transport properties to be accounted for. In recent work, the authors [ex. Clarkson et al. (2007a) and Jordan et al. (2006)] and others [ex. Gerami et al. (2007)] have demonstrated how new techniques such as the flowing material balance (FMB) and production type curves may be adapted to account for CBM storage mechanisms (i.e., adsorption), but, to date, the focus has been on relatively simple CBM reservoir behavior such as single-phase (gas) reservoirs with static effective permeability. The major contribution of the current work is the adaptation of modern PDA techniques (by use of modified material balance time/pseudotime and pseudopressure definitions) to analyze producing wells completed in CBM reservoirs exhibiting several possible flow characteristics: single-phase flow of gas in dry CBM reservoirs, single-phase flow of water (in undersaturated reservoirs), and two-phase (gas and water) flow (in saturated reservoirs). The latter reservoir type commonly exhibits effective permeability changes during depletion (because of relative and/or absolute permeability changes) and changing gas composition caused by relative adsorption effects, both of which have been accounted for in the current work. Specifically, the FMB technique is modified to include several complex CBM reservoir characteristics, and production type curves are applied to some scenarios. Although dry-CBM-well analysis was covered previously [ex. Clarkson et al. (2007a)], we will also discuss FMB development in these reservoirs for completeness. Several synthetic and field examples are given to demonstrate how FMB, type-curve analysis, and analytical simulation can be used in parallel to provide a particularly useful data-analysis toolset and workflow. These techniques were used successfully to extract quantitative reservoir information from single- and two-phase CBM-simulated and field-production pressure data. The PDA techniques developed for two-phase CBM require further evaluation, however.

Flowing Material Balance Analysis and Production Optimization in HPHT Sour Gas Field

2019 ◽  
Author(s):  
Azis Hidayat ◽  
Dwi Hudya Febrianto ◽  
Elisa Wijayanti ◽  
Diniko Nurhajj ◽  
Ahmad Sujai ◽  
...  
Keyword(s):  
Material Balance ◽  
Production Optimization ◽  
Gas Field ◽  
Balance Analysis ◽  
Flowing Material ◽  
Sour Gas

Two-Phase Flow in Microchannels

2001 ◽  
Author(s):  
G. Hetsroni ◽  
A. Mosyak ◽  
Z. Segal
Keyword(s):  
Heat Sink ◽  
High Speed ◽  
Single Phase ◽  
Flow Boiling ◽  
Electronics Cooling ◽  
Working Fluid ◽  
Microchannel Heat Sink ◽  
Two Phase ◽  
Infrared Radiometry ◽  
Phase Water

Abstract Experimental investigation of a heat sink for electronics cooling is performed. The objective is to keep the operating temperature at a relatively low level of about 323–333K, while reducing the undesired temperature variation in both the streamwise and transverse directions. The experimental study is based on systematic temperature, flow and pressure measurements, infrared radiometry and high-speed digital video imaging. The heat sink has parallel triangular microchannels with a base of 250μm. According to the objectives of the present study, Vertrel XF is chosen as the working fluid. Experiments on flow boiling of Vertrel XF in the microchannel heat sink are performed to study the effect of mass velocity and vapor quality on the heat transfer, as well as to compare the two-phase results to a single-phase water flow.

A new approach to evaluate the performance of partially propped hydraulic fractures

2013 ◽  
Vol 53 (1) ◽  
pp. 355 ◽  
Author(s):  
Luiz Bortolan Neto ◽  
Aditya Khanna ◽  
Andrei Kotousov
Keyword(s):  
Sensitivity Study ◽  
Economic Benefits ◽  
Productivity Index ◽  
Hydraulic Fractures ◽  
Fracture Geometry ◽  
Fracture Conductivity ◽  
New Approach ◽  
Fracture Length ◽  
Compressive Stresses ◽  
Initial Fracture

A new approach for evaluating the performance of hydraulic fractures that are partially packed with proppant (propping agent) particles is presented. The residual opening of the partially propped fracture is determined as a function of the initial fracture geometry, the propped length of the fracture, the compressive rock stresses, the elastic properties of the rock, and the compressibility of the proppant pack. A mathematical model for fluid flow towards the fracture is developed, which incorporates the effects of the residual opening profile of the fracture and the high conductivity of the unpropped fracture length. The residual opening profile of the fracture is calculated for a particular case where the proppant pack is nearly rigid and there is no closure of the fracture faces due to the confining (compressive) stresses. A sensitivity study is performed to demonstrate the dependence of the well productivity index on the propped length of the fracture, the proppant pack permeability, and the dimensionless fracture conductivity. The sensitivity study suggests that the residual opening of a fracture has a significant impact on production, and that partially propped fractures can be more productive than fully propped fractures. Application of this new approach can lead to economic benefits.

Sign in / Sign up

Export Citation Format

Share Document