Numerical Simulations of Surfactant Flooding in Carbonate Reservoirs: The Impact of Geological Heterogeneities Across Scales

2021 ◽  
Author(s):  
Jackson Pola ◽  
Sebastian Geiger ◽  
Eric Mackay ◽  
Christine Maier ◽  
Ali Al-Rudaini

Abstract We demonstrate how geological heterogeneity impacts the effectiveness of surfactant-based enhanced oil recovery (EOR) at larger (inter-well and sector) scales when upscaling small (core) scale heterogeneity and physicochemical processes. We used two experimental datasets of surfactant-based EOR where spontaneous imbibition and viscous displacement, respectively dominate recovery. We built 3D core-scale simulation models to match the data and parameterize surfactant models. The results were deployed in high-resolution models that preserve the complexity and heterogeneity of carbonate formations in the inter-well and sector scale. These larger-scale models were based on two outcrop analogues from France and Morroco, respectively, which capture the reservoir architectures inherent to the productive carbonate reservoir systems in the Middle East. We then assessed and quantified the error in production forecast that arises due to upscaling, upgridding, and simplification of geological heterogeneity. Simulation results showed a broad range of recovery predictions. The variability arises from the choice of surfactant model parameterization (i.e., spontaneous imbibition vs viscous displacement) and the way the heterogeneity in the inter-well and sector models was upscaled and simplified. We found that the parameterization of surfactant models has a significant impact on recovery predictions. Oil recovery at the larger scale was observed to be higher when using the parametrization derived from viscous displacement experiments compared to parameterization from spontaneous imbibition experiments. This observation clearly demonstrated how core-scale processes impact recovery predictions at the larger scales. Also, the variability in recovery prediction due to the choice of surfactant model was as large as the variability arising from upscaling and upgridding. Upscaled and upgridded models overestimated recovery because of the simplified geology. Grid coarsening exacerbated this effect because of the increased numerical dispersion. These results emphasize the need to use correctly configured surfactant models, appropriate grid resolution that minimizes numerical dispersion, and properly upscaled reservoir models to accurately forecast surfactant floods. Our findings present new insights into how the uncertainty in production forecasts during surfactant flooding depends on the way surfactant models are parameterized, how the reservoir geology is upscaled, and how numerical dispersion is impacted by grid coarsening.

2021 ◽  
Author(s):  
Olaitan Akinyele ◽  
Karl D. Stephen

Abstract Numerical simulation of surfactant flooding using conventional reservoir simulation models can lead to unreliable forecasts and bad decisions due to the appearance of numerical effects. The simulations give approximate solutions to systems of nonlinear partial differential equations describing the physical behavior of surfactant flooding by combining multiphase flow in porous media with surfactant transport. The approximations are made by discretization of time and space which can lead to spurious pulses or deviations in the model outcome. In this work, the black oil model was simulated using the decoupled implicit method for various conditions of reservoir scale models to investigate behaviour in comparison with the analytical solution obtained from fractional flow theory. We investigated changes to cell size and time step as well as the properties of the surfactant and how it affects miscibility and flow. The main aim of this study was to understand pulse like behavior that has been observed in the water bank to identify cause and associated conditions. We report for the first time that the pulses occur in association with the simulated surfactant water flood front and are induced by a sharp change in relative permeability as the interfacial tension changes. Pulses are diminished when the adsorption rate was within the value of 0.0002kg/kg to 0.0005kg/kg. The pulses are absent for high resolution model of 5000 cells in x direction with a typical cell size as used in well-scale models. The growth or damping of these pulses may vary from case to case but in this instance was a result of the combined impact of relative mobility, numerical dispersion, interfacial tension and miscibility. Oil recovery under the numerical problems reduced the performance of the flood, due to large amounts of pulses produced. Thus, it is important to improve existing models and use appropriate guidelines to stop oscillations and remove errors.


2019 ◽  
Vol 89 ◽  
pp. 02006
Author(s):  
F. Feldmann ◽  
A. M. AlSumaiti ◽  
S. K. Masalmeh ◽  
W. S. AlAmeri ◽  
S. Oedai

Low salinity water flooding (LSF) is a relatively simple and cheap EOR technique in which the salinit y of the injected water is optimized (by desalination and/or modification) to improve oil recovery over conventional waterflooding. Extensive laboratory experiments investigating the effect of LSF are available in the literature. Sulfate-rich as well as diluted brines have shown promising potential to increase oil production in limestone core samples. To quantify the low salinity effect, spontaneous imbibition and/or tertiary waterflooding experiments have been reported. For the first time in literature, this paper presents a comprehensive study of the centrifuge technique to investigate low salinity effect in carbonate samples. The study is divided into three parts. At first, a comprehensive screening was performed on the impact of different connate water and imbibition brine compositions/combinations on the spontaneous imbibition behavior. Second, the subsequent forced imbibition of the samples using the centrifuge method to investigate the impact of brine compositions on residual saturations and capillary pressure. Finally, three unsteady-state (USS) core floodings were conducted in order to examine the potential of the different brines to increase oil recovery in secondary mode (brine injection at connate water saturation) and tertiary mode (exchange of injection brine at mature recovery stage). The experiments were performed using Indiana limestone outcrops. The main conclusions of the study are spontaneous imbibition experiments only showed oil recovery in case the salinity of the imbibing water (IW) is lower than the salinity of the connate water (CW). No oil production was observed when the imbibing water had a higher salinity than the connate water or the salinity of the connate water and imbibing brine were identical. Moreover, the spontaneous imbibition experiments indicated that diluting the salinity of the imbibing water has a larger potential to spontaneously recover oil than the introduction of sulfate-rich sea water. The centrifuge experiments confirmed a connection between the overall salinity and oil recovery. As the salinity of the imbibing brines decreases, the capillary imbibition pressure curves showed an increasing water-wetting tendency and simultaneous reduction of the remaining oil saturation. The lowest remaining oil saturation was obtained for diluted sea water as CW and IW. The core flooding experiments reflected the results of the spontaneous imbibition and centrifuge experiments. Injecting brine at a rate of 0.05 cc/min, sea water and especially diluted sea water resulted in a significant higher oil recovery compared to formation brine. Moreover, when comparing secondary mode experiments, the remaining oil saturation after flooding by diluted sea water, sea water and formation water was 30.6 %, 35.5 % and 37.4 %, respectively. In tertiary injection mode, sea water did not lead to extra oil recovery while diluted sea water led to an additional oil recovery of 5.6 % in one out of two tertiary injection applications.


2018 ◽  
Vol 7 (2) ◽  
pp. 1-13
Author(s):  
Madi Abdullah Naser ◽  
Mohamed Erhayem ◽  
Ali Hegaig ◽  
Hesham Jaber Abdullah ◽  
Muammer Younis Amer ◽  
...  

Oil recovery process is an essential element in the oil industry, in this study, a laboratory study to investigate the effect of temperature and aging time on oil recovery and understand some of the mechanisms of seawater in the injection process. In order to do that, the sandstone and carbonate cores were placed in the oven in brine to simulate realistic reservoir conditions. Then, they were aged in crude oil in the oven. After that, they were put in the seawater to recover, and this test is called a spontaneous imbibition test. The spontaneous imbibition test in this study was performed at room temperature to oven temperature 80 oC with different sandstone and carbonate rock with aging time of 1126 hours. The result shows that the impact of seawater on oil recovery in sandstone is higher than carbonate. At higher temperature, the oil recovery is more moderate than low temperature. Likewise, as the aging time increase for both sandstone and carbonate rocks the oil recovery increase. 


2022 ◽  
Vol 15 (4) ◽  
pp. 139-149
Author(s):  
F. G. A. Pereira ◽  
V. E. Botechia ◽  
D. J. Schiozer

Pre-salt reservoirs are among the most important discoveries in recent decades due to the large quantities of oil in them. However, high levels of uncertainties related to its large gas/CO2 production prompt a more complex gas/CO2 management, including the use of alternating water and gas/CO2 injection (WAG) as a recovery mechanism to increase oil recovery from the field. The purpose of this work is to develop a methodology to manage cycle sizes of the WAG/CO2, and analyze the impact of other variables related to the management of producing wells during the process. The methodology was applied to a benchmark synthetic reservoir model with pre-salt characteristics. We used five approaches to evaluate the optimum cycle size under study, also assessing the impact of the management of producing wells: (A) without closing producers due to gas-oil ratio (GOR) limit; (B) GOR limit fixed at a fixed value (1600 m³/m³) for all wells; (C) GOR limit optimized per well; (D) joint optimization between GOR limit values of producers and WAG cycles; and (E) optimization of the cycle size per injector well with an optimized GOR limit. The results showed that the optimum cycle size depends on the management of the producers. Leaving all production wells open until the end of the field's life (without closing based on the GOR limit) or controlling the wells in a more restricted manner (with closing based on the GOR limit), led to significant variation of the results (optimal size of the WAG/CO2 cycles). Our study, therefore, demonstrates that the optimum cycle size depends on other control variables and can change significantly due to these variables. This work presents a study that aimed to manage the WAG-CO2 injection cycle size by optimizing the life cycle control variables to obtain better economic performance within the premises already established, such as the total reinjection of gas/CO2 produced, also analyzing the impact of other variables (management of producing wells) along with the WAG-CO2 cycles.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Daigang Wang ◽  
Jingjing Sun

Abstract Cyclic water huff and puff (CWHP) has proven to be an attractive alternative to improve oil production performance after depletion-drive recovery in fractured-vuggy carbonate reservoirs. However, due to the impact of strong heterogeneity, multiple types of fractured-vuggy medium, poor connectivity, complex flow behaviors and oil-water relationship, CWHP is merely suitable for specific types of natural fractured-vuggy medium, usually causing a great difference in actual oil-yielding effect. It remains a great challenge for accurate evaluation of CWHP adaptability and quantitative prediction of production performance in fractured-vuggy carbonate reservoir, which severely restricts the application of CWHP. For this study, we firstly enable the newly developed fuzzy grey relational analysis to quantify the adaptability of CWHP. With production history of several targeted producers, the accuracy of the proposed method is validated. Based on the traditional percolation theory and waterflood mechanisms in various types of fractured-vuggy medium, a quantitative prediction model for cyclic water cut fwp and increased recovery factor ΔR is presented. The CWHP production performance is discussed by using the Levenberg-Marquardt algorithm for history matching. With a better understanding of the fwp ~ ΔR curve characteristics in different types of fractured-vuggy medium, proper strategies or measures for potential-tapping remaining oil are provided. This methodology can also offer a good basis for engineers and geologists to develop other similar reservoirs with high efficiency.


Author(s):  
Mohammad Yunus Khan ◽  
Ajay Mandal

AbstractAvailability of gases at the field level makes attractive to water-alternating-gas (WAG) process for low viscosity and light oils carbonate reservoir. However, impact of reservoir heterogeneity on WAG performance is crucial before field application. In general, ramp carbonates have heterogeneity due to variation of permeability and porosity. However, WAG performance significantly affected by permeability variations. This article investigates merits and demerits of WAG displacement due to permeability heterogeneities such as permeability anisotropy, high permeability streaks (HKS), matrix permeability, dolomite and thin dense stylolite layers. High-resolution compositional simulations with tuned equation of state (EoS) were carried out using 2D and 3D sector models. The study focuses on WAG performance in terms of oil recovery, vertical sweep, solvent utilization, gas oil ratio (GOR), water cut (WCT), WAG response time, gravity override, hysteresis, un-contacted oil saturation and economics. The results of simulation show that the heterogeneous reservoir provides initially faster WAG response, lower expected ultimate recovery (EUR), faster gas breakthrough, higher GOR and WCT production compared to homogeneous reservoir. The gas gravity override at smaller wells spacing is less in homogeneous reservoir as compared to heterogeneous reservoir, but it is reverse in case of larger well spacing. In heterogeneous reservoir, the HKS shows significant gas override resulting in poor vertical sweep due to capillary holding, and the high permeability dolomite layer shows early water breakthrough. This reservoir has higher solvent utilization in initial stage, and then, it becomes nearly equal to homogeneous reservoir. Simulation in both reservoirs overestimates incremental recovery of 2–3% OOIP at one pore volume injection because of not involving un-contacted oil saturation as predicted in core flood. The findings of this study will help to understand WAG performance and design in highly heterogeneous reservoirs for field applications. Graphical abstract


PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0244738
Author(s):  
Muhammad Adil ◽  
Keanchuan Lee ◽  
Hasnah Mohd Zaid ◽  
M. Fadhllullah A. Shukur ◽  
Takaaki Manaka

Utilization of metal-oxide nanoparticles (NPs) in enhanced oil recovery (EOR) has generated substantial recent research interest in this area. Among these NPs, zinc oxide nanoparticles (ZnO-NPs) have demonstrated promising results in improving oil recovery due to their prominent thermal properties. These nanoparticles can also be polarized by electromagnetic (EM) field, which offers a unique Nano-EOR approach called EM-assisted Nano-EOR. However, the impact of NPs concentrations on oil recovery mechanism under EM field has not been well established. For this purpose, ZnO nanofluids (ZnO-NFs) of two different particle sizes (55.7 and 117.1 nm) were formed by dispersing NPs between 0.01 wt.% to 0.1 wt.% in a basefluid of sodium dodecylbenzenesulfonate (SDBS) and NaCl to study their effect on oil recovery mechanism under the electromagnetic field. This mechanism involved parameters, including mobility ratio, interfacial tension (IFT) and wettability. The displacement tests were conducted in water-wet sandpacks at 95˚C, by employing crude oil from Tapis. Three tertiary recovery scenarios have been performed, including (i) SDBS surfactant flooding as a reference, (ii) ZnO-NFs flooding, and (iii) EM-assisted ZnO-NFs flooding. Compare with incremental oil recovery from surfactant flooding (2.1% original oil in place/OOIP), nanofluid flooding reaches up to 10.2% of OOIP at optimal 0.1 wt.% ZnO (55.7 nm). Meanwhile, EM-assisted nanofluid flooding at 0.1 wt.% ZnO provides a maximum oil recovery of 10.39% and 13.08% of OOIP under EM frequency of 18.8 and 167 MHz, respectively. By assessing the IFT/contact angle and mobility ratio, the optimal NPs concentration to achieve a favorable ER effect and interfacial disturbance is determined, correlated to smaller hydrodynamic-sized nanoparticles that cause strong electrostatic repulsion between particles.


2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Wenting Yue ◽  
John Yilin Wang

The carbonate oil field studied is a currently producing field in U.S., which is named “PSU” field to remain anonymity. Discovered in 1994 with wells on natural flow or through artificial lift, this field had produced 17.8 × 106 bbl of oil to date. It was noticed that gas oil ratio had increased in certain parts and oil production declined with time. This study was undertaken to better understand and optimize management and operation of this field. In this brief, we first reviewed the geology, petrophysical properties, and field production history of PSU field. We then evaluated current production histories with decline curve analysis, developed a numerical reservoir model through matching production and pressure data, then carried out parametric studies to investigate the impact of injection rate, injection locations, and timing of injection, and finally developed optimized improved oil recovery (OIR) methods based on ultimate oil recovery and economics. This brief provides an addition to the list of carbonate fields available in the petroleum literature and also improved understandings of Smackover formation and similar analogous fields. By documenting key features of carbonated oil field performances, we help petroleum engineers, researchers, and students understand carbonate reservoir performances.


2013 ◽  
Author(s):  
H. H. Al-Attar ◽  
M. Y. Mahmoud ◽  
A. Y. Zekri ◽  
R. A. Almehaideb ◽  
M. T. Ghannam

Sign in / Sign up

Export Citation Format

Share Document