High-Resolution and Multimaterial Fracture Productivity Calculator for the Successful Design of Channel Fracturing Jobs

2021 ◽  
Author(s):  
Dimitry Chuprakov ◽  
Ludmila Belyakova ◽  
Ivan Glaznev ◽  
Aleksandra Peshcherenko
Keyword(s):  
High Resolution ◽  
Effective Conductivity ◽  
Productivity Index ◽  
Hydraulic Fractures ◽  
Total Production ◽  
Fracture Conductivity ◽  
Hindered Settling ◽  
Accurate Evaluation ◽  
Skin Factor ◽  
Fracture Closure

Abstract We developed a high-resolution fracture productivity calculator to enable fast and accurate evaluation of hydraulic fractures modeled using a fine-scale 2D simulation of material placement. Using an example of channel fracturing treatments, we show how the productivity index, effective fracture conductivity, and skin factor are sensitive to variations in pumping schedule design and pulsing strategy. We perform fracturing simulations using an advanced high-resolution multiphysics model that includes coupled 2D hydrodynamics with geomechanics (pseudo-3D, or P3D, model), 2D transport of materials with tracking temperature exposure history, in-situ kinetics, and a hindered settling model, which includes the effect of fibers. For all simulated fracturing treatments, we accurately solve a problem of 3D planar fracture closure on heterogenous spatial distribution of solids, estimate 2D profiles of fracture width and stresses applied to proppants, and, as a result, obtain the complex and heterogenous shape of fracture conductivity with highly conductive cells owing to the presence of channels. Then, we also evaluate reservoir fluid inflows from a reservoir to fracture walls and further along a fracture to limited-size wellbore perforations. Solution of a productivity problem at the finest scale allows us to accurately evaluate key productivity characteristics: productivity index, dimensional and dimensionless effective conductivity, skin factor, and folds of increase, as well as the total production rate at any day and for any pressure drawdown in a well during well production life. We develop a workflow to understand how productivity of a fracture depends on variation of the pumping schedule and facilitate taking appropriate decisions about the best job design. The presented workflow gives insight into how new computationally efficient methods can enable fast, convenient, and accurate evaluation of the material placement design for maximum production with cost-saving channel fracturing technology.

On the Application of the Channel-Fracturing Technique to Soft Rock Formations

SPE Journal ◽  
2018 ◽  
Vol 24 (01) ◽  
pp. 395-412 ◽  
Author(s):  
Aditya Khanna ◽  
Andrei Kotousov ◽  
Hao Thanh Luong
Keyword(s):  
Parametric Study ◽  
Analytical Approach ◽  
Volume Fraction ◽  
Effective Conductivity ◽  
Soft Rock ◽  
Open Channels ◽  
Hydraulic Fractures ◽  
Fracture Conductivity ◽  
Rock Formations ◽  
Fracture Closure

Summary The application of the channel-fracturing technique can result in a significant increase in the conductivity of hydraulic fractures and reduced proppant usage. In soft rock formations, the conductivity of the partially propped fractures would depend not only on the volume fraction of the open channels, but also on the elastic deformation of open channels and fracture closure resulting from proppant consolidation and embedment. In this study, an analytical approach is developed for identifying the optimal proppant column spacing that maximizes the effective conductivity. The latter parameter can guide the design of the proppant-injection schedule and well-perforation scheme. To demonstrate the approach, we conduct a parametric study under realistic field conditions and identify the folds of increase in fracture conductivity and reduction in proppant use resulting from the optimized application of the channel-fracturing technique. The outcomes of the parametric study could be particularly useful in the application of the developed approach to soft rock formations.

A new approach to evaluate the performance of partially propped hydraulic fractures

2013 ◽  
Vol 53 (1) ◽  
pp. 355 ◽  
Author(s):  
Luiz Bortolan Neto ◽  
Aditya Khanna ◽  
Andrei Kotousov
Keyword(s):  
Sensitivity Study ◽  
Economic Benefits ◽  
Productivity Index ◽  
Hydraulic Fractures ◽  
Fracture Geometry ◽  
Fracture Conductivity ◽  
New Approach ◽  
Fracture Length ◽  
Compressive Stresses ◽  
Initial Fracture

A new approach for evaluating the performance of hydraulic fractures that are partially packed with proppant (propping agent) particles is presented. The residual opening of the partially propped fracture is determined as a function of the initial fracture geometry, the propped length of the fracture, the compressive rock stresses, the elastic properties of the rock, and the compressibility of the proppant pack. A mathematical model for fluid flow towards the fracture is developed, which incorporates the effects of the residual opening profile of the fracture and the high conductivity of the unpropped fracture length. The residual opening profile of the fracture is calculated for a particular case where the proppant pack is nearly rigid and there is no closure of the fracture faces due to the confining (compressive) stresses. A sensitivity study is performed to demonstrate the dependence of the well productivity index on the propped length of the fracture, the proppant pack permeability, and the dimensionless fracture conductivity. The sensitivity study suggests that the residual opening of a fracture has a significant impact on production, and that partially propped fractures can be more productive than fully propped fractures. Application of this new approach can lead to economic benefits.

Propagation, proppant transport and the evolution of transport properties of hydraulic fractures

2018 ◽  
Vol 855 ◽  
pp. 503-534 ◽  
Author(s):  
Jiehao Wang ◽  
Derek Elsworth ◽  
Martin K. Denison
Keyword(s):  
Preferential Flow ◽  
Fluid Pressure ◽  
Fracture Propagation ◽  
Hydraulic Fractures ◽  
Fracture Aperture ◽  
Fluid Viscosity ◽  
Fracture Conductivity ◽  
Proppant Transport ◽  
Fracture Closure ◽  
Proppant Embedment

Hydraulic fracturing is a widely used method for well stimulation to enhance hydrocarbon recovery. Permeability, or fluid conductivity, of the hydraulic fracture is a key parameter to determine the fluid production rate, and is principally conditioned by fracture geometry and the distribution of the encased proppant. A numerical model is developed to describe proppant transport within a propagating blade-shaped fracture towards defining the fracture conductivity and reservoir production after fracture closure. Fracture propagation is formulated based on the PKN-formalism coupled with advective transport of an equivalent slurry representing a proppant-laden fluid. Empirical constitutive relations are incorporated to define rheology of the slurry, proppant transport with bulk slurry flow, proppant gravitational settling, and finally the transition from Poiseuille (fracture) flow to Darcy (proppant pack) flow. At the maximum extent of the fluid-driven fracture, as driving pressure is released, a fracture closure model is employed to follow the evolution of fracture conductivity with the decreasing fluid pressure. This model is capable of accommodating the mechanical response of the proppant pack, fracture closure of potentially contacting rough surfaces, proppant embedment into fracture walls, and most importantly flexural displacement of the unsupported spans of the fracture. Results show that reduced fluid viscosity increases the length of the resulting fracture, while rapid leak-off decreases it, with both characteristics minimizing fracture width over converse conditions. Proppant density and size do not significantly influence fracture propagation. Proppant settling ensues throughout fracture advance, and is accelerated by a lower viscosity fluid or greater proppant density or size, resulting in accumulation of a proppant bed at the fracture base. ‘Screen-out’ of proppant at the fracture tip can occur where the fracture aperture is only several times the diameter of the individual proppant particles. After fracture closure, proppant packs comprising larger particles exhibit higher conductivity. More importantly, high-conductivity flow channels are necessarily formed around proppant banks due to the flexural displacement of the fracture walls, which offer preferential flow pathways and significantly influence the distribution of fluid transport. Higher compacting stresses are observed around the edge of proppant banks, resulting in greater depths of proppant embedment into the fracture walls and/or an increased potential for proppant crushing.

scholarly journals OPTIMISATION OF HYDRAULIC FRACTURING DESIGN IN LOWER OLIGOCENE RESERVOIR, KINH NGU TRANG OILFIELD

2018 ◽  
Vol 18 (3) ◽  
pp. 323-337
Author(s):  
Nguyen Huu Truong
Keyword(s):  
Hydraulic Fracturing ◽  
Complex Structure ◽  
Power Requirement ◽  
Fracture Conductivity ◽  
Fracture Width ◽  
The North ◽  
Fracture Closure ◽  
Average Water ◽  
White Tiger ◽  
Fracture Height

Kinh Ngu Trang oilfield is of the block 09-2/09 offshore Vietnam, which is located in the Cuu Long basin, the distance from that field to Port of Vung Tau is around 140 km and it is about 14 km from the north of Rang Dong oilfield of the block 15.2, and around 50 km from the east of White Tiger in the block 09.1. That block accounts for total area of 992 km2 with the average water depth of around 50 m to 70 m. The characteristic of Oligocene E reservoir is tight oil in sandstone, very complicated with complex structure. Therefore, the big challenges in this reservoir are the low permeability and the low porosity of around 0.2 md to less than 1 md and 1% to less than 13%, respectively, leading to very low fracture conductivity among the fractures. Through the Minifrac test for reservoir with reservoir depth from 3,501 mMD to 3,525 mMD, the total leak-off coefficient and fracture closure pressure were determined as 0.005 ft/min0.5 and 9,100 psi, respectively. To create new fracture dimensions, hydraulic fracturing stimulation has been used to stimulate this reservoir, including proppant selection and fluid selection, pump power requirement. In this article, the authors present optimisation of hydraulic fracturing design using unified fracture design, the results show that optimum fracture dimensions include fracture half-length, fracture width and fracture height of 216 m, 0.34 inches and 31 m, respectively when using proppant mass of 150,000 lbs of 20/40 ISP Carbolite Ceramic proppant.

Pressure Depletion Mapping Using Multi-Well DFITs and its Applications in Hydraulic Fracture Characterization and Permeability Estimation: Examples from Montney Formation

2021 ◽  
Author(s):  
Behjat Haghshenas ◽  
Farhad Qanbari
Keyword(s):  
Data Analysis ◽  
Surface Area ◽  
Reservoir Simulation ◽  
Production Data ◽  
Hydraulic Fractures ◽  
Fracture Geometry ◽  
Fracture Conductivity ◽  
Field Case ◽  
Pressure Depletion ◽  
Montney Formation

Abstract Recovery factor for multi-fractured horizontal wells (MFHWs) at development spacing in tight reservoirs is closely related to the effective horizontal and vertical extents of the hydraulic fractures. Direct measurement of pressure depletion away from the existing producers can be used to estimate the extent of the hydraulic fractures. Monitoring wells equipped with downhole gauges, DFITs from multiple new wells close to an existing (parent) well, and calculation of formation pressure from drilling data are among the methods used for pressure depletion mapping. This study focuses on acquisition of pressure depletion data using multi-well diagnostic fracture injection tests (DFITs), analysis of the results using reservoir simulation, and integration of the results with production data analysis of the parent well using rate-transient analysis (RTA) and reservoir simulation. In this method, DFITs are run on all the new wells close to an existing (parent) well and the data is analyzed to estimate reservoir pressure at each DFIT location. A combination of the DFIT results provides a map of pressure depletion around the existing well, while production data analysis of the parent well provides fracture conductivity and surface area and formation permeability. Furthermore, reservoir simulation is tuned such that it can also match the pressure depletion map by adjusting the system permeability and fracture geometry of the parent well. The workflow of this study was applied to two field case from Montney formation in Western Canadian Sedimentary Basin. In Field Case 1, DFIT results from nine new wells were used to map the pressure depletion away from the toe fracture of a parent well (four wells toeing toward the parent well and five wells in the same direction as the parent). RTA and reservoir simulation are used to analyze the production data of the parent well qualitatively and quantitatively. The reservoir model is then used to match the pressure depletion map and the production data of the parent well and the outputs of the model includes hydraulic fracture half-lengths on both sides of the parent well, formation permeability, fracture surface area and fracture conductivity. In Field Case 2, the production data from an existing well and DFIT result from a new well toeing toward the existing wells were incorporated into a reservoir simulation model. The model outputs include system permeability and fracture surface area. It is recommended to try the method for more cases in a specific reservoir area to get a statistical understanding of the system permeability and fracture geometry for different completion designs. This study provides a practical and cost-effective approach for pressure depletion mapping using multi-well DFITs and the analysis of the resulting data using reservoir simulation and RTA. The study also encourages the practitioners to take every opportunity to run DFITs and gather pressure data from as many well as possible with focus on child wells.

A Novel Design Method for Optimizing the Diverter Dosage in Hydraulic Fracturing Using Three-Dimensionally Printed Fractures

2021 ◽  
Author(s):  
Meng Wang ◽  
Mingguang Che ◽  
Bo Zeng ◽  
Yi Song ◽  
Yun Jiang ◽  
...  
Keyword(s):  
Shale Gas ◽  
Design Method ◽  
Pressure Rise ◽  
Horizontal Wells ◽  
Optimization Method ◽  
Darcy Law ◽  
Hydraulic Fractures ◽  
Fracture Conductivity ◽  
Fracture Simulation ◽  
3D Printed

Abstract Application of diversion agents in temporarily plugging fracturing of horizontal wells of shale has becoming more and more popular. Nevertheless, the studies on determining the diverter dosage are below adequacy. A novel approach based on laboratory experiments, logging data, rock mechanics tests and fracture simulation was proposed to optimizing the dosage of diversion agents. The optimization model is based on the classic Darcy Law. A pair of 3D-printed rock plates with rugged faces was combined to simulate the coarse hydraulic fractures with the width of 2.0 ~ 7.0 mm. The mixture of the diversion agents and slickwater was dynamically injected to simulate the fracture in Temco fracture conductivity system to mimic the practical treatment to temporarily plugging the fracture. The permeability of the temporary plugging zone in the 3D-printed fractures was measured in order to optimize the dosage of the selected diversion agents. The value of Pnet (also the value of ΔP in Darcy Formula) required for creation of new branched fractures was determined using the Warpinski-Teufel Failure Rules. The hydraulic fractures of target stages were simulated to obtain the widths and heights. The experimental results proved that the selected suite of the diversion agents can temporarily plug the 3D-printed fractures of 2.0 ~ 7.0 mm with blocking pressure up to 15 MPa. The measured permeability of the resulting plugging zones was 0.724 ~ 0.933 D (averaging 0.837 D). The value of Pnet required for creation of branched fractures in shale of WY area (main shale gas payzone of China) was determined as 0.4 ~ 15.6 MPa (averaging 7.9 MPa) which means the natural fractures and/or weak planes with approaching angle less than 70° could be opened to increase the SRV. The typical dosage of the diversion agents used for one stage of the horizontal wells (averaging TVD 3600 m) was calculated as 232 ~ 310 kg. The optimization method was applied to the design job of temporarily plugging fracturing of two shale gas wells. The observed surface pressure rise after injection of diversion agents was 0.6 ~ 11.7 MPa (averaging 4.7 MPa) and the monitored microseismic events of the test stages were 37% more than those of the offset stages.

New Analytical Approach to Operational Assessment of Fractured Well Productivity with Variable Permeability

2021 ◽  
Author(s):  
Evgeniy Viktorovich Yudin ◽  
George Aleksandrovich Piotrovskiy ◽  
Maria Vladimirovna Petrova ◽  
Alexey Petrovich Roshchektaev ◽  
Nikita Vladislavovich Shtrobel
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Free Parameter ◽  
Numerical Solutions ◽  
Analytical Models ◽  
Productivity Index ◽  
Finite Conductivity ◽  
Well Productivity ◽  
Fracture Conductivity ◽  
Variable Permeability

Abstract Requirements of targeted optimization are imposed on the hydraulic fracturing operations carried out in the conditions of borderline economic efficiency of fields taking into account geological and technological features. Consequently, the development of new analytical tools foranalyzing and planning the productivity of fractured wells, taking into account the structuralfeatures of the productive reservoir and inhomogeneous distribution of the fracture conductivity, is becoming highly relevant. The paper proposes a new approach of assessing the vertical hydraulic fracture productivityin a rectangular reservoir in a pseudo-steady state, based on reservoir resistivity concept described in the papers of Meyer et al. However, there is a free parameter in the case of modeling the productivity of a hydraulic fracture by the concept. The parameter describes the distribution of the inflow along the plane of the fracture. This paper presents a systematic approach to determining of the parameter. The resulting model allows to conduct an assessment of the influence of various complications in the fracture on the productivity index. During the research a method of determining the free parameter was developed,it was based on the obtained dependence of the inflow distribution on the coordinate along the fracture of finite conductivity. The methodology allowed to refine existent analytical solution of the Meyer et al. model, which, in turn, allowed to assess the influence of different fracture damages in the hydraulic fracture on the productivity index of the well. The work includes the cases of the presence of fracture damages at the beginning and at the end of the fracture. A hydraulic fracture model was built for each of the types of damages, it was based on the developed method, and also the solution of dimensionless productivity ratio was received. The results of the obtained solution were confirmed by comparison with the numerical solutions of commercial simulators and analytical models available in the literature. The advantage of the methodology is the resulting formulas for well productivity are relatively simple, even for exotic cases ofvariable conductivity fractures. The approaches and algorithms described in the paper assume the calculation of the productivity of a hydraulic fracture with variable conductivity and the presence of other complicatingfactors.The methodology of the paper can be used for analysis and diagnosis problems with formation hydraulic fracturing. The efficiency of the calculations allows using the presented methodology to solve inverse problems of determining the efficiency of the hydraulic fracturing operation.

scholarly journals Estimating Unpropped-Fracture Conductivity and Fracture Compliance From Diagnostic Fracture-Injection Tests

SPE Journal ◽  
2018 ◽  
Vol 23 (05) ◽  
pp. 1648-1668 ◽  
Author(s):  
HanYi Wang ◽  
Mukul M. Sharma
Keyword(s):  
Earth Science ◽  
Mathematical Framework ◽  
Field Scale ◽  
Time Data ◽  
Fracture Conductivity ◽  
Reliable Technique ◽  
Fracture Width ◽  
In Situ Conditions ◽  
Fracture Closure

Summary A new method is proposed to estimate the compliance and conductivity of induced unpropped fractures as a function of the effective stress acting on the fracture from diagnostic-fracture-injection-test (DFIT) data. A hydraulic-fracture resistance to displacement and closure is described by its compliance (or stiffness). Fracture compliance is closely related to the elastic, failure, and hydraulic properties of the rock. Quantifying fracture compliance and fracture conductivity under in-situ conditions is crucial in many Earth-science and engineering applications but is very difficult to achieve. Even though laboratory experiments are used often to measure fracture compliance and conductivity, the measurement results are influenced strongly by how the fracture is created, the specific rock sample obtained, and the degree to which it is preserved. As such, the results may not be representative of field-scale fractures. During the past 2 decades, the DFIT has evolved into a commonly used and reliable technique to obtain in-situ stresses, fluid-leakoff parameters, and formation permeability. The pressure-decline response across the entire duration of a DFIT reflects the process of fracture closure and reservoir-flow capacity. As such, it is possible to use these data to quantify changes in fracture conductivity as a function of stress. In this paper, we present a single, coherent mathematical framework to accomplish this. We show how each factor affects the pressure-decline response, and the effects of previously overlooked coupled mechanisms are examined and discussed. Synthetic and field-case studies are presented to illustrate the method. Most importantly, a new specialized plot (normalized system-stiffness plot) is proposed, which not only provides clear evidence of the existence of a residual fracture width as a fracture is closing during a DFIT, but also allows us to estimate fracture-compliance (or stiffness) evolution, and infer unpropped fracture conductivity using only DFIT pressure and time data alone. It is recommended that the normalized system-stiffness plot (NS plot) be used as a standard practice to complement the G-function or square-root-of-time plot and log-log plot because it provides very valuable information on fracture-closure behavior and the properties of fracture-surface roughness at a field-scale, information that cannot be obtained by any other means.

An Analytical Solution for Pseudosteady-State Flow in a Hydraulically Fractured Stratified Reservoir With Interlayer Crossflows

SPE Journal ◽  
2017 ◽  
Vol 22 (04) ◽  
pp. 1103-1111 ◽  
Author(s):  
Hongliang Sun ◽  
Zhengfu Ning ◽  
Xiantong Yang ◽  
Yunhu Lu ◽  
Yan Jin ◽  
...  
Keyword(s):  
Analytical Solution ◽  
Productivity Index ◽  
Time Rate ◽  
Fracture Conductivity ◽  
Rate Of Increase ◽  
Wellbore Pressure ◽  
Variable Space ◽  
Stratified Reservoir ◽  
Production Period ◽  
First Time

Summary This work presents an analytical solution for the pseudosteady-state (PSS) flow in a hydraulically fractured stratified reservoir with finite fracture conductivity in the presence of interlayer crossflows. Specifically, a three-layer configuration is considered, with the midlayer hydraulically fractured and sandwiched between two adjacent layers feeding the midlayer by crossflows. The circular drainage area is approximated as elliptical, allowing the problem to be solved in elliptical coordinates analytically. Explicit expressions in the physical-variable space for the dimensionless productivity index (PI) and the wellbore-pressure drawdown for the PSS flow of such a hydraulically fractured system with interlayer crossflows are derived for the first time. Compared with the case without interlayer crossflows, the dimensionless PI is reduced because of additional pressure drawdown occurring in the sandwiching layers; on the other hand, the time rate of increase of the pressure drawdown at the wellbore is also decreased because of the addition of the producible fluid stored in the sandwiching layers. This slower time rate of increase of the wellbore-pressure drawdown prolongs the PSS production period, which can lead to a larger accumulative production. It is also shown that when the layers have comparable thickness, fracturing the higher-permeability layer provides the best performance because the wellbore-pressure drawdown experiences the slowest time rate of increase during the PSS flow period. The analytical solution can also be used for fracture-design optimization as well as production-decline analysis for fractured stratified systems.

Sign in / Sign up

Export Citation Format

Share Document