scholarly journals Enhanced Impact-Resistance of Aeronautical Quasi-Isotropic Composite Plates Through Diffused Water Molecules in Epoxy

2020 ◽  
Author(s):  
Furqan Ahmad ◽  
Fethi Abbassi ◽  
Mazhar Ul-Islam ◽  
Frédéric JACQUEMIN ◽  
Jung-Wuk Hong
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Composite Plates ◽  
Hot Water ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Segmental Mobility ◽  
Impact Tests ◽  
Isotropic Composite ◽  
The Impact

Abstract In order to elucidate the hygroscopic effects on impact-resistance of carbon fiber/epoxy quasi-isotropic composite plates, low-velocity impact tests are conducted on dry and hygroscopically conditioned plates, respectively, under identical configurations. For the impact tests, plates were immersed in the hot water at 80 °C to absorb a different amount of moisture content (MC). Experimental results reveal that the presence of the MC plays a pivotal role by improving the impact-resistance of composite plates. Plates with higher percentage of MC could behave elastically to a larger strain, yielding larger deflection under impact loading. From SEM fractographies, it is observed that small disbanding grows at the interface of epoxy and carbon fiber due to absorbed MC. After absorbing MC, most of impact enegy is dissipated in hygroscopic conditioned composite plates throught elastic deformation and overall less damage is induced in wet composite plates compare to the dry plate. We can postulate that the presence of MC increases the elastic limit as well as ductility of the epoxy by promoting chain segmental mobility of the polymer molecules, which eventually leads to the enhancement of the impact-resistance of wet quasi-isotropic composite plates in comparison with the dry plate.

scholarly journals Enhanced impact-resistance of aeronautical quasi-isotropic composite plates through diffused water molecules in epoxy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Furqan Ahmad ◽  
Fethi Abbassi ◽  
Mazhar Ul-Islam ◽  
Frédéric Jacquemin ◽  
Jung-Wuk Hong
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Composite Plates ◽  
Hot Water ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Segmental Mobility ◽  
Impact Tests ◽  
Isotropic Composite ◽  
The Impact

AbstractIn order to elucidate the hygroscopic effects on impact-resistance of carbon fiber/epoxy quasi-isotropic composite plates, low-velocity impact tests are conducted on dry and hygroscopically conditioned plates, respectively, under identical configurations. For the impact tests, plates were immersed in the hot water at 80 °C to absorb a different amount of moisture content (MC). Experimental results reveal that the presence of the MC plays a pivotal role by improving the impact-resistance of composite plates. Plates with higher percentage of MC could behave elastically to a larger strain, yielding larger deflection under impact loading. From SEM fractographies, it is observed that small disbanding grows at the interface of epoxy and carbon fiber due to absorbed MC. After absorbing MC, most of impact energy is dissipated in hygroscopic conditioned composite plates through elastic deformation and overall less damage is induced in wet composite plates compare to the dry plate. We can postulate that the presence of MC increases the elastic limit as well as ductility of the epoxy by promoting chain segmental mobility of the polymer molecules, which eventually leads to the enhancement of the impact-resistance of wet quasi-isotropic composite plates in comparison with the dry plate.

scholarly journals Improved impact response of hygrothermally conditioned carbon/epoxy woven composites

2016 ◽  
Vol 23 (6) ◽  
pp. 699-710 ◽  
Author(s):  
Yucheng Zhong ◽  
Sunil Chandrakant Joshi
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Elastic Response ◽  
Woven Composites ◽  
Low Velocity ◽  
Hygrothermal Conditioning ◽  
The Impact ◽  
Carbon Fiber Epoxy

AbstractThe effects of hygrothermal conditioning and moisture on the impact resistance of carbon fiber/epoxy composite laminates were investigated. Specimens were fabricated from carbon fiber/epoxy woven prepreg materials. The fabricated specimens were either immersed in water at 80°C or subjected to hot/wet (at 80°C in water for 12 h) to cold/dry (at -30°C in a freezer for 12 h) cyclic hygrothermal conditions, which resulted in different moisture contents inside the laminates. It was found that the absorbed moisture did not migrate out from composite materials at -30°C. Neither of the hygrothermal conditions in this study had detrimental effects on the microstructure of the laminates. Low-velocity impact testing was subsequently conducted on the conditioned specimens. When attacked by the same level of impact energy, laminates with different moisture levels experienced different levels of impact damage. Moisture significantly alleviated the extent of damage in carbon fiber/epoxy woven laminates. The elastic response of the laminate under impact was improved after hygrothermal conditioning. The mechanism behind the improved impact resistance after absorbing moisture was proposed and deliberated.

Improvement of Biocomposite Performance under Low-Velocity Impact Test - A Review

2021 ◽  
Vol 893 ◽  
pp. 67-74
Author(s):  
Usha Kiran Sanivada ◽  
Gonzalo Mármol ◽  
Francisco P. Brito ◽  
Raul Fangueiro
Keyword(s):  
Composite Structures ◽  
Impact Test ◽  
Impact Resistance ◽  
Vital Role ◽  
Low Velocity Impact ◽  
Efficient Design ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Tests ◽  
The Impact

The study of the impact energy and the composite behaviour plays a vital role in the efficient design of composite structures. Among the various categories of impact tests, it is essential to study low-velocity impact tests as the damage generated due to these loads is often not visible to the naked eye. The internal damages can reduce the strength of the composites and hence the impact behaviour must be addressed specifically for improving their applications in the transport industry. The main aim of this paper is to provide a comprehensive review of the work focusing on the assessment of biocomposites performance under low impact velocity, the different deformations, and damage mechanisms, as well the methods to improve the impact resistance.

Finite Element Modeling of Local Damage in Kevlar/Carbon Fiber Sandwich Under Low Velocity Impact

2007 ◽  
Author(s):  
Saiphon Jacque ◽  
Robert Rizza ◽  
Mohammad Mahinfalah
Keyword(s):  
Carbon Fiber ◽  
Impact Load ◽  
Composite Plates ◽  
Low Velocity Impact ◽  
Face Sheet ◽  
Sandwich Composite ◽  
Low Velocity ◽  
Fiber Layer ◽  
Impact Properties ◽  
The Impact

Impact properties of carbon fiber and Kevlar or hybrid (3K carbon fiber/1500 Denier Kevlar) combination sandwich composite plates were numerically investigated in this study. The goal of this research was to define the change in impact properties as results of replacing the carbon fiber layer on the impact-side face sheet with combinations of carbon fiber/Kevlar or carbon fiber/hybrid. Information on impact energy and maximum impact force obtained from previous experiments were applied to validate the model input properties. The models were then used to characterize the mechanism of the reduction in the global stiffness of the sandwich plate due to the sequence of the damage in the foam core and the face sheet corresponding to the variation of the laminate mixture and loading energy. Results from this study could be of assistance to determining structure integrity with respect to the composite combination under impact load.

Low Velocity Impact Resistance of CPVC Pipes Exposed to Natural Outdoor Weathering Conditions

2012 ◽  
Vol 445 ◽  
pp. 959-964
Author(s):  
Z. Khan ◽  
Necar Merah ◽  
A. Bazoune ◽  
S. Furquan
Keyword(s):  
Impact Resistance ◽  
Outdoor Exposure ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Pipe Material ◽  
Low Velocity ◽  
Impact Energies ◽  
The Impact ◽  
Impact Events ◽  
Outdoor Weathering

Low velocity drop weight impact testing of CPVC pipes was conducted on 160 mm long pipe sections obtained from 4-inch (100 mm) diameter schedule 80 pipes. Impact test were carried out for the base (as received) pipes and after their exposure to out door natural weathering conditions in Dhahran, Saudi Arabia. The results of the impact testing on the natural (outdoor exposure) broadly suggest that the natural outdoor exposures produce no change in the impact resistance of CPVC pipe material for the impact events carrying low incident energies of 10 and 20J. At the impact energies of 35 and 50J the natural outdoor exposures appear to cause appreciable degradation in the impact resistance of the CPVC pipe material. This degradation is noted only for the longer exposure periods of 12 and 18 months.

Coda Waves for Health Monitoring of Composites Under Low-Velocity Impact

2021 ◽  
Author(s):  
Subal Sharma ◽  
Vinay Dayal
Keyword(s):  
Ultrasonic Waves ◽  
Coda Waves ◽  
Low Velocity Impact ◽  
Coda Wave ◽  
Low Velocity ◽  
Fibrous Composite Material ◽  
Velocity Impact ◽  
Isotropic Composite ◽  
The Impact ◽  
Impact Damages

Abstract Coda waves have been shown to be sensitive to lab-controlled defects such as very small holes in fibrous composite material. In the real world, damages are subtler and more irregular. The main objective of this work is to investigate coda wave capability to detect low-velocity impact damages. The emphasis is to detect the presence of barely visible impact damages using ultrasonic waves. Detection of incipient damage state is important as it will grow over the life of the structure. Differential features, previously used in similar work, have been utilized to detect realistic impact damages on carbon fiber composites. Quasi-isotropic composite laminates were subjected to low-velocity impact energy ranging from 2J to 4.5J. Two differential features reported could be used detect the presence of damage. It is also observed that ply orientation can be a deterministic factor for indicating damages. The size and shape of the impact damage has been characterized using ultrasonic C-scans. Results indicate that coda waves can be used for the detection of damage due to low-velocity impact.

Experimental Analysis for the Effect of Impactor Geometry on Carbon Reinforced Composite Materials

2017 ◽  
Vol 25 (9) ◽  
pp. 677-682 ◽  
Author(s):  
Faruk Elaldi ◽  
Busra Baykan ◽  
Can Akto
Keyword(s):  
Composite Materials ◽  
Carbon Fibre ◽  
Composite Plates ◽  
High Strength ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Reinforced Composite ◽  
Contact Surfaces ◽  
The Impact

For the last three decades, composites have become very preferable materials to be used in the automotive industry, structural parts of aircraft and military systems and spacecraft, due to their high strength and modulus. Composite materials are sometimes exposed to invisible or visible damage due to impact loading during their service life. In this study, the effect of impactor geometry with four different contact surfaces on woven carbon fibre-reinforced composite plates having three different thicknesses are investigated. In the first stage, composite plates were manufactured with the ply orientations of [45/-45/0/90/45/-45]2s, [45/-45/0/90/45/-45]3s, [45/-45/0/90/45/-45]4s based on conventional usage. In the second stage, carbon fibre-reinforced composite test panels were exposed to low velocity impact tests to obtain force-time, energy-time and force-displacement curves. Finally, semi and full penetration of composite panels and damage magnitude were determined. It was found that the impactor geometries with lower contact surfaces such as conical and ogive types were much more penetrative on composite plates than the other geometries, but they caused larger damage area in the vicinity of the impact point.

scholarly journals Effect of Thermal Ageing on the Impact Damage Resistance and Tolerance of Carbon-Fibre-Reinforced Epoxy Laminates

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 160 ◽  
Author(s):  
Irene García-Moreno ◽  
Miguel Caminero ◽  
Gloria Rodríguez ◽  
Juan López-Cela
Keyword(s):  
Carbon Fibre ◽  
Residual Strength ◽  
Composite Structures ◽  
Impact Resistance ◽  
Thermal Ageing ◽  
Low Velocity Impact ◽  
Impact Tests ◽  
Compression After Impact ◽  
Structural Applications ◽  
The Impact

Composite structures are particularly vulnerable to impact, which drastically reduces their residual strength, in particular, at high temperatures. The glass-transition temperature (Tg) of a polymer is a critical factor that can modify the mechanical properties of the material, affecting its density, hardness and rigidity. In this work, the influence of thermal ageing on the low-velocity impact resistance and tolerance of composites is investigated by means of compression after impact (CAI) tests. Carbon-fibre-reinforced polymer (CFRP) laminates with a Tg of 195 °C were manufactured and subjected to thermal ageing treatments at 190 and 210 °C for 10 and 20 days. Drop-weight impact tests were carried out to determine the impact response of the different composite laminates. Compression after impact tests were performed in a non-standard CAI device in order to obtain the compression residual strength. Ultrasonic C-scanning of impacted samples were examined to assess the failure mechanisms of the different configurations as a function of temperature. It was observed that damage tolerance decreases as temperature increases. Nevertheless, a post-curing process was found at temperatures below the Tg that enhances the adhesion between matrix and fibres and improves the impact resistance. Finally, the results obtained demonstrate that temperature can cause significant changes to the impact behaviour of composites and must be taken to account when designing for structural applications.

Sign in / Sign up

Export Citation Format

Share Document