scholarly journals Biodiesel production from alternative raw materials using a heterogeneous Low Ordered Biosilicified Enzyme as biocatalyst

2020 ◽  
Author(s):  
Gabriel Orlando Ferrero ◽  
Edgar Maximiliano Sánchez Faba ◽  
Griselda Alejandra Eimer

Abstract Background: Cumulative reported evidence has indicated that renewable feedstocks are a promising alternative source to fossil platforms for the production of fuels and chemicals. In that regard, the development of new, highly active, selective, and easy to recover and reuse catalysts for biomass conversions is urgently needed. The combination of enzymatic and inorganic heterogeneous catalysis generates an unprecedented platform that combines the advantages of both, the catalytic efficiency and selectivity of enzymes with the ordered structure, high porosity, mechanical, thermal and chemical resistance of mesoporous materials to obtain enzymatic heterogeneous catalysts. Enzymatic mineralization with an organic silicon precursor (biosilicification) is a promising and emerging approach for the generation of solid hybrid biocatalysts with exceptional stability under severe use conditions. Herein, we assessed the putative advantages of the biosilicification technology for developing an improved efficient and stable biocatalyst for sustainable biofuel production. Results: A series of solid enzymatic catalysts denominated LOBE (Low Ordered Biosilicified Enzyme) were synthesized from Pseudomonas fluorescens lipase and tetraethyl orthosilicate. The microscopic structure and physicochemical properties characterization revealed that the enzyme formed aggregates that were contained in the heart of silicon-covered micelles, providing active sites with the ability to process different raw materials (commercial sunflower and soybean oils, Jatropha excisa oil, waste frying oil, acid oil from soybean soapstock, and pork fat) to produce first and second generation biodiesel. Ester content ranged from 81 to 93% wt depending on the raw material used for biodiesel synthesis. Conclusions: A heterogeneous enzymatic biocatalyst, LOBE4, for efficient biodiesel production was successfully developed in a single step synthesis reaction using biosilicification technology. LOBE4 showed to be highly efficient in converting refined, non-edible and residual oils (with high water and free fatty acid contents) and ethanol into biodiesel. Thus, LOBE4 emerges as a promising tool to produce second-generation biofuels, with significant implications for establishing a circular economy and reducing the carbon footprint.

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Gabriel Orlando Ferrero ◽  
Edgar Maximiliano Sánchez Faba ◽  
Griselda Alejandra Eimer

Abstract Background Cumulative reported evidence has indicated that renewable feedstocks are a promising alternative source to fossil platforms for the production of fuels and chemicals. In that regard, the development of new, highly active, selective, and easy to recover and reuse catalysts for biomass conversions is urgently needed. The combination of enzymatic and inorganic heterogeneous catalysis generates an unprecedented platform that combines the advantages of both, the catalytic efficiency and selectivity of enzymes with the ordered structure, high porosity, mechanical, thermal and chemical resistance of mesoporous materials to obtain enzymatic heterogeneous catalysts. Enzymatic mineralization with an organic silicon precursor (biosilicification) is a promising and emerging approach for the generation of solid hybrid biocatalysts with exceptional stability under severe use conditions. Herein, we assessed the putative advantages of the biosilicification technology for developing an improved efficient and stable biocatalyst for sustainable biofuel production. Results A series of solid enzymatic catalysts denominated LOBE (low ordered biosilicified enzyme) were synthesized from Pseudomonas fluorescens lipase and tetraethyl orthosilicate. The microscopic structure and physicochemical properties characterization revealed that the enzyme formed aggregates that were contained in the heart of silicon-covered micelles, providing active sites with the ability to process different raw materials (commercial sunflower and soybean oils, Jatropha excisa oil, waste frying oil, acid oil from soybean soapstock, and pork fat) to produce first- and second-generation biodiesel. Ester content ranged from 81 to 93% wt depending on the raw material used for biodiesel synthesis. Conclusions A heterogeneous enzymatic biocatalyst, LOBE4, for efficient biodiesel production was successfully developed in a single-step synthesis reaction using biosilicification technology. LOBE4 showed to be highly efficient in converting refined, non-edible and residual oils (with high water and free fatty acid contents) and ethanol into biodiesel. Thus, LOBE4 emerges as a promising tool to produce second-generation biofuels, with significant implications for establishing a circular economy and reducing the carbon footprint.


2020 ◽  
Author(s):  
Gabriel Orlando Ferrero ◽  
Edgar Maximiliano Sánchez Faba ◽  
Griselda Alejandra Eimer

Abstract Background: Nowadays, as an alternative to the production of fuels and chemicals from the fossil platform, renewable feedstocks are widely investigated. For biomass conversion, a new generation of catalysts with specific characteristics such as high activity and selectivity, easy recovery and reusability is necessary. The design of highly efficient and stable heterogeneous catalysts represents a challenge in this field, mainly to overcome current energy and environmental issues. The combination of enzymatic and heterogeneous inorganic catalysis generates an unprecedented platform that combines the advantages of both. Among the techniques for producing solid catalysts, enzymatic mineralization with an organic silicic precursor to obtain hybrid biocatalysts (biosilicification) is highlighted. This technique can provide exceptional stability to the biocatalyst in drastic conditions of use.Results: Then, under these criteria, this work presents the one-step synthesis of a solid enzymatic catalyst, denominated Low Ordered Biosilicified Enzyme (LOBE) due to their structural properties. Pseudomonas Fluorescens lipase forms aggregates that are contained in the heart of a silicon-covered micelle, providing active sites with the ability to process different raw materials (commercial sunflower and soybean oil, Jatropha excisa oil, waste frying oil, residual soybeans, and pork fat) to produce first and second generation biodiesel. Obtaining yields between 81 and 93% by weight depending on the used raw material.Conclusions: Therefore, refined, non-edible and residual oils (with high water and free fatty acid contents) can be transformed into biodiesel through LOBE catalysts with commercial ethanol as co-substrate.


2015 ◽  
Vol 781 ◽  
pp. 655-658 ◽  
Author(s):  
Thakun Sawiwat ◽  
Somjai Kajorncheappunngam

Synthesis of biodiesel from rubber seed oil using a supercritical methanol was investigated under various reaction conditions (220 - 300°C, 80 - 180 bar) with reaction time of 1-15 min and oil:methanol molar ratio of 1:20 - 1:60. Free fatty acid methyl esters (FAMEs) content were analyzed by gas chromatography-mass spectroscopy (GC-MS). Most properties of produced biodiesel were in good agreement with biodiesel standard (EN 14214). The maximum FAME yield of 86.90% was obtained at 260°C, 160 bar, 5 min reaction time using oil:methanol molar ratio of 1:40. The result showed the acid value of rubber seed oil decreased to 0.58 mgKOH/g from initial 24 mgKOH/g to. It could be concluded from this findings that crude rubber seed oil is a promising alternative raw material for biodiesel synthesis via supercritical methanol tranesterification.


Author(s):  
Luthfi Assadad ◽  
Bagus Sediadi Bandol Utomo ◽  
Rodiah Nurbaya Sari

Biofuel is one of alternative fossil fuel, in which the raw materials come from biological resources.One of the raw materials for biofuel production is microalgae. Microalgae grows rapidly, does notcompete with food for humans, and needs small areas to cultivate. Utilization of microalgae forbiofuel research nowadays is focusing on biodiesel production, but actually microalgae can beused to produce other biofuels such as bioethanol. The carbohydrate content of the microalgaecan be converted into glucose and fermented into alcohol. Carbohydrate content of the microalgaeis about 5.0–67.9%, which could produce bioethanol up to 38%. A harmony between bioethanoland biodiesel production from microalgae is needed for the optimum utilization of microalgae.Bioethanol production from microalgae can be done using de-oiled microalgae.


Author(s):  
S. P. Safronov ◽  
E. L. Krasnykh ◽  
S. V. Levanova

Kinetics of catalytic esterification of glycerol with butanoic acid on model systems was studied. Reaction orders for the reactants (butanoic acid and glycerol) were determined. They are close to 1.It was shown that the reaction order with respect to the catalyst - orthophosphoric acid - in regions where its concentration is above 0.1 mol/l is equal to zero. The estimated value of activation energy is 51.9± 8.0 kJ/mol. The results of the experiment can be used to create an industrial technological process for the synthesis of glycerol tributyrate. This compound can be used as an alternative non-phthalate plasticizer for articles made of PVC. The obtained kinetic model was validated on glycerol-containing waste of the biodiesel synthesis from renewable raw materials. The recycling of the by-product in the biofuel production with obtaining plasticizing compositions for the polymer industry can be developed on the basis of the studies.


Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 812
Author(s):  
Hoang Chinh Nguyen ◽  
My-Linh Nguyen ◽  
Chia-Hung Su ◽  
Hwai Chyuan Ong ◽  
Horng-Yi Juan ◽  
...  

Biodiesel is a promising alternative to fossil fuels and mainly produced from oils/fat through the (trans)esterification process. To enhance the reaction efficiency and simplify the production process, various catalysts have been introduced for biodiesel synthesis. Recently, the use of bio-derived catalysts has attracted more interest due to their high catalytic activity and ecofriendly properties. These catalysts include alkali catalysts, acid catalysts, and enzymes (biocatalysts), which are (bio)synthesized from various natural sources. This review summarizes the latest findings on these bio-derived catalysts, as well as their source and catalytic activity. The advantages and disadvantages of these catalysts are also discussed. These bio-based catalysts show a promising future and can be further used as a renewable catalyst for sustainable biodiesel production.


Author(s):  
K. Malins ◽  
V. Kampars ◽  
R. Kampare ◽  
T. Rusakova

The transesterification of vegetable oil using various kinds of alcohols is a simple and efficient renewable fuel synthesis technique. Products obtained by modifying natural triglycerides in transesterification reaction substitute fossil fuels and mineral oils. Currently the most significant is the biodiesel, a mixture of fatty acid methyl esters, which is obtained in a reaction with methanol, which in turn is obtained from fossil raw materials. In biodiesel production it would be more appropriate to use alcohols which can be obtained from renewable local raw materials. Ethanol rouses interest as a possible reagent, however, its production locally is based on the use of grain and therefore competes with food production so it would implicitly cause increase in food prices. Another raw material option is alcohols that can be obtained from furfurole. Furfurole is obtained in dehydration process from pentose sugars which can be extracted from crop straw, husk and other residues of agricultural production. From furfurole the tetrahydrofurfuryl alcohol (THFA), a raw material for biodiesel, can be produced. By transesterifying rapeseed oil with THFA it would be possible to obtain completely renewable biodiesel with properties very close to diesel [2-4]. With the purpose of developing the synthesis of such fuel, in this work a three-stage synthesis of rapeseed oil tetrahydrofurfurylesters (ROTHFE) in sulphuric acid presence has been performed, achieving product with purity over 98%. The most important qualitative factors of ROTHFE have been determined - cold filter plugging point, cetane number, water content, Iodine value, phosphorus content, density, viscosity and oxidative stability.


2021 ◽  
pp. 64-71
Author(s):  
Nadezhda V. Nesterova ◽  
Albina Dosaeva

In this article, the authors conducted a macro-diagnostic study of pear fruits of three varieties. A qualitative analysis of raw materials was carried out using color reactions, thin-layer chromatography in pear fruits most widely cultivated in the territory of the Russian Federation. Arbutin was identified in the raw material, which allows us to consider this type of raw material as a promising alternative to lingonberry and bearberry leaves used in official medicine and actualizes further research aimed at developing modern methods of standardization with subsequent inclusion in the developed regulatory documentation.


2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Egle Sendzikiene ◽  
Violeta Makareviciene

Abstract The ever-increasing environmental pollution from greenhouse gases motivates the search for methods to reduce it. One such method is the use of biodiesel fuels in the transport sector. Conventional biodiesel production generates up to 10% of a by-product, raw glycerol, whose amount continues to increase as biodiesel production volumes expand, but its demand remains limited. Recently, options have been analysed to replace the triglyceride transesterification process generally used in biodiesel production with an interesterification process that does not generate raw glycerol, instead yielding triacylglycerol that can be directly used as fuel for diesel engines by mixing with fatty acid esters. Additionally, triacylglycerol improves the low-temperature properties of fuel. The present article discusses triglyceride interesterification processes using various carboxylate esters of low molecular weight. Information is provided on raw materials that can be subjected to interesterification for biodiesel synthesis. The possible applications of chemical and enzymatic catalysis for triglyceride interesterification are discussed, and the influence of the catalyst amount, molar ratio of reactants, temperature and process duration on the effectiveness of interesterification is examined. The conditions and effectiveness of noncatalytic interesterification are also discussed in the article. Qualitative indicators of the products obtained and their conformity to the requirements of the European standard for biodiesel fuel are discussed.


2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.


Sign in / Sign up

Export Citation Format

Share Document