scholarly journals RAPE SEED OIL TETRAHYDROFURFURYLESTERS

2015 ◽  
Vol 1 ◽  
pp. 46
Author(s):  
K. Malins ◽  
V. Kampars ◽  
R. Kampare ◽  
T. Rusakova
Keyword(s):  
Rapeseed Oil ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Methyl Esters ◽  
Cetane Number ◽  
Food Prices ◽  
Raw Material ◽  
Biodiesel Production ◽  
Cold Filter Plugging Point ◽  
Mineral Oils

The transesterification of vegetable oil using various kinds of alcohols is a simple and efficient renewable fuel synthesis technique. Products obtained by modifying natural triglycerides in transesterification reaction substitute fossil fuels and mineral oils. Currently the most significant is the biodiesel, a mixture of fatty acid methyl esters, which is obtained in a reaction with methanol, which in turn is obtained from fossil raw materials. In biodiesel production it would be more appropriate to use alcohols which can be obtained from renewable local raw materials. Ethanol rouses interest as a possible reagent, however, its production locally is based on the use of grain and therefore competes with food production so it would implicitly cause increase in food prices. Another raw material option is alcohols that can be obtained from furfurole. Furfurole is obtained in dehydration process from pentose sugars which can be extracted from crop straw, husk and other residues of agricultural production. From furfurole the tetrahydrofurfuryl alcohol (THFA), a raw material for biodiesel, can be produced. By transesterifying rapeseed oil with THFA it would be possible to obtain completely renewable biodiesel with properties very close to diesel [2-4]. With the purpose of developing the synthesis of such fuel, in this work a three-stage synthesis of rapeseed oil tetrahydrofurfurylesters (ROTHFE) in sulphuric acid presence has been performed, achieving product with purity over 98%. The most important qualitative factors of ROTHFE have been determined - cold filter plugging point, cetane number, water content, Iodine value, phosphorus content, density, viscosity and oxidative stability.

scholarly journals Potential Applications of Native Cyanobacterium Isolate (Arthrospira platensis NIOF17/003) for Biodiesel Production and Utilization of Its Byproduct in Marine Rotifer (Brachionus plicatilis) Production

2021 ◽  
Vol 13 (4) ◽  
pp. 1769 ◽  
Author(s):  
Mohamed A. Zaki ◽  
Mohamed Ashour ◽  
Ahmed M. M. Heneash ◽  
Mohamed M. Mabrouk ◽  
Ahmed E. Alprol ◽  
...  
Keyword(s):  
Brachionus Plicatilis ◽  
Methyl Esters ◽  
Cetane Number ◽  
Biomass Productivity ◽  
Dry Weight ◽  
Arthrospira Platensis ◽  
International Standards ◽  
Biodiesel Production ◽  
Cold Filter Plugging Point ◽  
Rotifer Brachionus Plicatilis

To achieve strong, successful and commercial aqua-biotechnological microalgae applications, screening, isolation, molecular identification, and physiological characterizations are needed. In the current study, a native cyanobacteria strain Arthrospira platensis NIOF17/003 was isolated from the surface water of El-Khadra Lake, a saline-alkaline lake located in Wadi El-Natrun, Egypt. The cyanobacterium was phylogenetically identified by 16S rRNA molecular marker and deposited in the GenBank database (accession number MW396472). The late exponential phase of A. platensis NIOF17/003 was reached at the 8th day of growth using Zarrouk medium, with a recorded dry weight (DW) of 0.845 g L−1. The isolated strain showed 52% of protein, 14% of carbohydrate, biomass productivity of 143.83 mg L−1 day−1, 8.5% of lipid, and lipid productivity of 14.37 mg L−1 day−1. In general, the values of cetane number, iodine value, cold filter plugging point (52.9, 85.5 g I2/100 g oil, and −2.2 °C, respectively) of the isolated fatty acid methyl esters are in accordance with those suggested by international standards. Besides, applying algal-free lipid (FL) as biodiesel byproduct in the production of rotifer (Brachionus plicatilis) revealed that a 0.6 g L−1 FL significantly increased the rotifer population females carrying eggs, confirming that FL can be used efficiently for B. plicatilis production. The current study concluded that the new isolate A. platensis NIOF17/003 is a promising strain for double sustainable use in biodiesel production and aquaculture feed.

scholarly journals Scope of biodiesel from oils of woody plants: a review

Clean Energy ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 89-106
Author(s):  
Baskar Thangaraj ◽  
Pravin Raj Solomon
Keyword(s):  
Woody Plants ◽  
Fossil Fuels ◽  
Edible Oils ◽  
Raw Materials ◽  
Structural Characteristics ◽  
Chemical Properties ◽  
Raw Material ◽  
Biodiesel Production ◽  
Primary Methods ◽  
Environmental Consequences

Abstract Non-edible oils obtained from chosen non-conventional woody plants are considered as potential raw materials for biodiesel production. These plants mostly grow in wastelands. Structural characteristics of these oils as raw material are very much in tune with the properties of biodiesel such as long-chain hydrocarbon, having an adequate level of unsaturation with branched chain. Four primary methods are being followed to make biodiesel from vegetable oil. They are direct use through blending, microemulsion, thermal cracking (pyrolysis) and transesterification. Non-edible oil would eliminate the issue of food vs fuel. The biodiesel manufactured from oils of woody plants may partially reduce the demand for liquid-fuel energy and addresses the environmental consequences of using fossil fuels. Oil from a total of 17 species of woody plants (Angiosperms) belonging to 14 families are considered in this paper. The habit, habitat and geographical distribution of each species are also presented. The physico-chemical properties of their oil, with special reference to the fatty-acid profile that ultimately decides the characteristics of the biodiesel prepared from them, are reviewed.

scholarly journals Unconventional vegetable oils as raw materials for biodiesel production

2017 ◽  
Vol 168 (1) ◽  
pp. 197-200
Author(s):  
Marta AMBROSEWICZ-WALACIK ◽  
Małgorzata TAŃSKA ◽  
Marek WALACIK ◽  
Michał KOZŁOWSKI
Keyword(s):  
Vegetable Oils ◽  
Raw Materials ◽  
Methyl Esters ◽  
Oxidation Stability ◽  
Physicochemical Characteristics ◽  
Acid Number ◽  
Biodiesel Production ◽  
Biofuel Production ◽  
Cold Filter Plugging Point ◽  
Evening Primrose

The aim of the study was to determine the possibility of using the unconventional vegetable oils for the biofuel production. The research material were cold-pressed oils from the seeds of milk thistle, hemp and evening primrose. After conducting the initial physicochemical characteristics of oil samples, including the determination of sulphur content, acid number, viscosity at 40°C, density at 15ºC, oxidation stability and fatty acid composition, analysed oils have been subjected to the transesterification process. The roduced methyl esters were further characterized by the above-mentioned features. Additionally, the temperatures of cold filter plugging point, cloud point and flash point were determined. On the basis of the conducted analyses it was demonstrated that the obtained oils, due to the high, far in excess of acceptable, values of the viscosity and density, and too low oxidative stability could not be used as a pure fuel. A similar conclusion was formulated in case of the produced methyl esters.

Mango (Magnifera indica) seed oil grown in Dilla town as potential raw material for biodiesel production using NaOH- a homogeneous catalyst

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Diesel Engine ◽  
Physicochemical Properties ◽  
Seed Oil ◽  
Methyl Esters ◽  
Pollution Prevention ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalyst ◽  
Minimal Amount

Biodiesel produced by transesterification process from vegetable oils or animal fats is viewed as a promising renewable energy source. Now a day’s diminishing of petroleum reserves in the ground and increasing environmental pollution prevention and regulations have made searching for renewable oxygenated energy sources from biomasses. Biodiesel is non-toxic, renewable, biodegradable, environmentally benign, energy efficient and diesel substituent fuel used in diesel engine which contributes minimal amount of global warming gases such as CO, CO2, SO2, NOX, unburned hydrocarbons, and particulate matters. The chemical composition of the biodiesel was examined by help of GC-MS and five fatty acid methyl esters such as methyl palmitate, methyl stearate, methyl oleate, methyl linoleate and methyl linoleneate were identified. The variables that affect the amount of biodiesel such as methanol/oil molar ratio, mass weight of catalyst and temperature were studied. In addition to this the physicochemical properties of the biodiesel such as (density, kinematic viscosity, iodine value high heating value, flash point, acidic value, saponification value, carbon residue, peroxide value and ester content) were determined and its corresponding values were 87 Kg/m3, 5.63 Mm2/s, 39.56 g I/100g oil, 42.22 MJ/Kg, 132oC, 0.12 mgKOH/g, 209.72 mgKOH/g, 0.04%wt, 12.63 meq/kg, and 92.67 wt% respectively. The results of the present study showed that all physicochemical properties lie within the ASTM and EN biodiesel standards. Therefore, mango seed oil methyl ester could be used as an alternative to diesel engine.

scholarly journals Ethanol-Based Biodiesel from Waste Vegetable Oil

2007 ◽  
Vol 7 (1 & 2) ◽  
pp. 83
Author(s):  
Mary Grace M. Oliveros ◽  
Amiliza B. Baiting ◽  
Menchie G. Lumain ◽  
Maria Theresa I. Cabaraban
Keyword(s):  
Vegetable Oil ◽  
Fast Food ◽  
Fossil Fuels ◽  
Material Balance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Waste Vegetable Oil ◽  
Power Testing ◽  
Technological Analysis

Waste vegetable oil, mainly coming from frying residues, can be used as raw material to obtain a diesel fuel (biodiesel). Biodiesel, a nontoxic, biodegradable, diesel-like fuel, is an important energy alternative capable of decreasing environmental problems caused by the consumption of fossil fuels. The utilization of waste vegetable oils as raw material in biodiesel production was studied. Research was undertaken to establish the availability of used vegetable oil to supply a biodiesel process. It is intended that this work forms an academic study combined with an environmental and technological analysis of the merits of biodiesel as a sustainable fuel. Laboratory experimentation investigated the possibility of using waste vegetable oil from the local fast food chains, and potassium hydroxide as catalyst for the transesterification process. The cleaned waste vegetable oil undergoes transesterification for 4 hours, after which, the biodiesel is separated from the glycerin by gravity. Washing is necessary to remove residual catalyst or soap. Overall material balance for the process gives: 1 kg Waste Vegetable oil + 0.18 kg EtOH + 0.01 kg KOH → 0.74 kg Biodiesel + 0.44 kg Glycerin The biodiesel, in pure form (B100) and in 50% proportion (B50) with petroleum diesel, was run in an essentially unmodified Toyota 2C diesel engine. Smoke density (opacity) and CO exhaust emission both decreased with B50. However, Nox increased with B50. Fuel consumption during engine power testing is significantly greater using the biodiesel, but is also significantly reduced with B50.

WASTE FRYING OIL TRANSESTERIFICATION TREATED BY STEAM DRAG METHOD

2018 ◽  
Vol 26 (26) ◽  
pp. 34-42
Author(s):  
Daniel Sena MARINS ◽  
Marcos Vinícius Oliveira CARDOSO ◽  
Mara Eliza SANTOS ◽  
Jeferson MASSINHAN
Keyword(s):  
Moisture Content ◽  
Conversion Rate ◽  
Large Scale ◽  
Methyl Esters ◽  
Frying Oil ◽  
Raw Material ◽  
Biodiesel Production ◽  
Scale Production ◽  
Residual Oil ◽  
Conversion Rates

Demand for diversified biodiesel feedstocks is high and increasing, but few are viable for large-scale production, and many of those selected compete with other sectors of the chemical industry. To improve energy and environmental sustainability, fatty acids from waste oils that are improperly disposed of and pollute the environment can be used for transesterification reactions. However, they need treatment to achieve high conversion rates. In this context, the aim of this work was to perform and analyze the treatment of residual frying oil with the evaporation and entrainment process, aiming at its use as raw material to obtain biodiesel (methyl esters) by a transesterification reaction. The physicochemical properties of the residual oil after treatment were characterized by moisture content, pH and the acidity, saponification, iodine, and peroxide index. The conversion rate of the residual oil to methyl esters was determined by 1H NMR analysis. After the treatment, the method of analysis of variance showed that the oil obtained a significant reduction of the saponification, iodine, peroxide and acidity indexes, being the acidity reduced from 9.36 to 7.85 mg KOH g-1. The moisture content of 0.733% and elevation of pH to 8.0. The conversion rate of fatty acid biodiesel of residual oil was 79.3 %, lower value of standards norms (ASTM, 2005; EN, 2008; ANP, 2014), showing that the assigned methodology for frying residual oil is inefficient in biodiesel production.

High Performance Alternative Diesel Engine Fuel using Modified Rice Straw Catalyst

2020 ◽  
Author(s):  
Rehab Metwally ◽  
hassan Abu Hashish ◽  
Haitham Abd El-Samad ◽  
Mostafa Awad ◽  
Ghada Kadry
Keyword(s):  
Rice Straw ◽  
Conversion Efficiency ◽  
Diesel Engines ◽  
High Performance ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Methyl Esters ◽  
Agricultural Waste ◽  
Biodiesel Production ◽  
Engine Fuel

Abstract Background: The world depends almost on fossil fuels. This leads to depletion of oil and an increase in environmental pollution. Therefore, the researchers search to find alternative fuels. Waste cooking oil (WCO) was selected as feedstock for biodiesel production to eliminates the pollution problems. The agricultural waste is very big and without cost, this leads to the use of the rice straw in preparing a catalyst for biodiesel production. Results: The reusability of the acidic catalyst confirmed that the conversion efficiency was high until after 8 cycles of the production. The highest conversion efficiency of the converting WCO extended to 90.38% with 92.5% maximum mass yield and methyl ester content 97.7% wt. at the optimized conditions. The result was indicating that B15 is the best blend for thermal efficiency and specific fuel consumption. All emission concentrations decrease with increasing the engine load, especially for B15 fuels compared to the diesel oil.Conclusion: The novelty of this paper is assessing the methyl esters from the local WCO as an alternative fuel for diesel engines using a heterogeneous catalyst based on the agricultural waste. The performance of the diesel engines and its exhaust emissions have been experimentally investigated with the produced biodiesel of WCO as a blend (B10, B15, and B20) compared to the diesel.

scholarly journals Catalytic hydrogenation of straight vegetable oil using NiMo/ Al2O3 catalyst for biodiesel production

2018 ◽  
Vol 67 ◽  
pp. 02045
Author(s):  
SD Sumbogo Murti ◽  
J. Prasetyo ◽  
G.W. Murti ◽  
Z. D. Hastuti ◽  
F. M. Yanti
Keyword(s):  
Vegetable Oil ◽  
Catalytic Hydrogenation ◽  
Cooling System ◽  
Cetane Number ◽  
Chemical Properties ◽  
Raw Material ◽  
Biodiesel Production ◽  
Operation Condition ◽  
Straight Vegetable Oil ◽  
Al2o3 Catalyst

The attractiveness of biodiesel as an alternative fuel compared to fossil fuels because it has many advantages such as the availability of abundant raw materials, more environmentally friendly, high combustion efficiency, low sulphur content, high cetane number and biodegradability. Making biodiesel from straight vegetable oil (VGO) has been done through the catalytic hydrogenation process. A VGO of callophylum inophyllum oil was treated via degumming and neutralisation to remove all impurities before hydroprocessing. Hydroprocessing was carried out in a 500ml autoclave at 30 – 50 MPa of initial hydrogen pressure, 300 – 400oC of reaction temperature and equipped with stirrer and cooling system. NiMo/Al2O3 catalyst was activated with CS2 mixture at 370oC prior to the reaction. Some physical and chemical properties of the catalytic hydroprocessing product have been investigated in accordance to ASTM standard. The measurement result of product varies according to the operation condition. The result showed that callophyllum inophyllum oil can be used as raw material for biodiesel production over NiMo/Al2O3. Sulfided NiMo/Al2O3 catalysts are preferred due to high diesel yield.

scholarly journals Oxalic Acid as a Hydrogen Donor for the Hydrodesulfurization of Gas Oil and Deoxygenation of Rapeseed Oil Using Phonolite-Based Catalysts

Molecules ◽  
2020 ◽  
Vol 25 (16) ◽  
pp. 3732
Author(s):  
José Miguel Hidalgo Herrador ◽  
Jakub Fratczak ◽  
Zdeněk Tišler ◽  
Hector de Paz Carmona ◽  
Romana Velvarská
Keyword(s):  
Oxalic Acid ◽  
Rapeseed Oil ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Hydrogen Donor ◽  
Gas Oil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrogen Donors ◽  
Temperature Programmed

The use of renewable local raw materials to produce fuels is an important step toward optimal environmentally friendly energy consumption. In addition, the use of these sources together with fossil fuels paves the way to an easier transition from fossil to renewable fuels. The use of simple organic acids as hydrogen donors is another alternative way to produce fuel. The present work reports the use of oxalic acid as a hydrogen donor for the catalytic hydrodesulfurization of atmospheric gas oil and the deoxygenation of rapeseed oil at 350 °C. For this process, one commercial NiW/SiO2–Al2O3 solid and two NiW/modified phonolite catalysts were used, namely Ni (5%) W (10%)/phonolite treated with HCl, and Ni (5%) W (10%)/phonolite treated with oxalic acid. The fresh phonolite catalysts were characterized by Hg porosimetry and N2 physisorption, ammonia temperature programmed desorption (NH3-TPD), X-ray diffraction (XRD), and X-ray fluorescence (XRF). The sulfided metal phonolite catalysts were characterized by XRD and XRF. Hydrodesulfurization led to a decrease in sulfur content from 1 to 0.5 wt% for the phonolite catalysts and to 0.8 wt% when the commercial catalyst was used. Deoxygenation led to the production of 15 and 65 wt% paraffin for phonolite and commercial solids, respectively. The results demonstrate the potential of using oxalic acid as a hydrogen donor in hydrotreating reactions.

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong
Keyword(s):  
Reaction Time ◽  
Microwave Power ◽  
Raw Materials ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Animal Bone ◽  
Natural Hydroxyapatite

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.

Sign in / Sign up

Export Citation Format

Share Document