phthalate plasticizer
Recently Published Documents


TOTAL DOCUMENTS

68
(FIVE YEARS 18)

H-INDEX

14
(FIVE YEARS 3)

Catalysts ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1368
Author(s):  
Jia-Ming Xu ◽  
Shu-Hsien Chou ◽  
Ying Zhang ◽  
Mohanraj Kumar ◽  
Shan-Yi Shen

Dibutyl phthalate (DBP) in the presence of a wastewater system is harmful to the environment and interferes with the human’s endocrine system. For wastewater treatment, DBP is very difficult to be decomposed by biotechniques and many catalytic processes have been developed. Among them, the electrocatalytic oxidation (EO) technique has been proven to possess high degradation efficiency of various organic compounds in wastewater. In this study, an electrocatalytic electrode of iridium-tantalum/titanium (IrO2-Ta2O5/Ti) was employed as the anode and graphite as the cathode to decompose DBP substances in the water. According to experimental results, the high removal efficiency of DBP and total organic carbon (TOC) of 90% and 56%, respectively, could be obtained under a voltage gradient of 10 V/cm for 60 min. Compared with other photocatalysis degradation, the IrO2-Ta2O5/Ti electrode could shorten about half the treatment time and electric power based on the same removal efficiency of DBP (i.e., photocatalysis requires 0.225~0.99 KWh). Results also indicated that the production of hydroxyl radical (•OH) in the electrocatalytic electrode played a key role for decomposing the DBP. Moreover, the pH and conductivity of water containing DBP were slightly changed and eventually remained in a stable state during the EO treatment. In addition, the removal efficiency of DBP could still remain about 90% after using the IrO2-Ta2O5/Ti electrode three times and the surface structure of the IrO2-Ta2O5/Ti electrode was stable.


2021 ◽  
pp. 127944
Author(s):  
Fengxiao Zhu ◽  
Yuanyuan Yan ◽  
Evelyn Doyle ◽  
Changyin Zhu ◽  
Xin Jin ◽  
...  

2021 ◽  
Vol 12 ◽  
Author(s):  
Bin Ji ◽  
Zina Wen ◽  
Chaobo Ni ◽  
Qiqi Zhu ◽  
Yiyan Wang ◽  
...  

Background: Diisoheptyl phthalate (DIHP) is a phthalate plasticizer, which is a branched phthalate. Here, we reported the effects of gestational exposure to DIHP on testis development in male rats.Methods: Pregnant Sprague-Dawley rats were orally fed with vehicle (corn oil, control) or DIHP (10, 100, 500, and 1,000 mg/kg) from gestational day (GD) 12–21. At GD21, serum testosterone levels, the number and distribution of fetal Leydig cells, and testicular mRNA and protein levels, the incidence of multinucleated gonocytes, and focal testicular hypoplasia in the neonatal testis were measured.Results: DIHP increased the fetal Leydig cell cluster size and decreased the fetal Leydig cell size with LOAEL of 10 mg/kg. DIHP did not affect the fetal Leydig cell number. DIHP significantly lowered serum testosterone levels, down-regulated the expression of steroidogenesis-related genes (Lhcgr, Star, Cyp11a1, Hsd3b1, Cyp17a1, and Hsd17b3) and testis descent-related gene (Insl3) as well as protein levels of cholesterol side-chain cleavage enzyme (CYP11A1) and insulin-like 3 (INSL3). DIHP dose-dependently increased the percentage of multinucleated gonocytes with the low observed adverse-effect level (LOAEL) of 100 mg/kg. DIHP induced focal testicular hypoplasia.Conclusion: Gestational exposure to DIHP causes testis dysgenesis in rats.


2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Siyu Liu ◽  
Kai Wang ◽  
Laurie K Svoboda ◽  
Christine A Rygiel ◽  
Kari Neier ◽  
...  

Abstract Di(2-ethylhexyl) phthalate (DEHP) is a type of phthalate plasticizer found in a variety of consumer products and poses a public health concern due to its metabolic and endocrine disruption activities. Dysregulation of epigenetic modifications, including DNA methylation, has been shown to be an important mechanism for the pathogenic effects of prenatal exposures, including phthalates. In this study, we used an established mouse model to study the effect of perinatal DEHP exposure on the DNA methylation profile in liver (a primary target tissue of DEHP) and blood (a common surrogate tissue) of both juvenile and adult mice. Despite exposure ceasing at 3 weeks of age (PND21), we identified thousands of sex-specific differential DNA methylation events in 5-month old mice, more than identified at PND21, both in blood and liver. Only a small number of these differentially methylated cytosines (DMCs) overlapped between the time points, or between tissues (i.e. liver and blood), indicating blood may not be an appropriate surrogate tissue to estimate the effects of DEHP exposure on liver DNA methylation. We detected sex-specific DMCs common between 3-week and 5-month samples, pointing to specific DNA methylation alterations that are consistent between weanling and adult mice. In summary, this is the first study to assess the genome-wide DNA methylation profiles in liver and blood at two different aged cohorts in response to perinatal DEHP exposure. Our findings cast light on the implications of using surrogate tissue instead of target tissue in human population-based studies and identify epigenetic biomarkers for DEHP exposure.


Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2809
Author(s):  
Gergely Márk Csányi ◽  
Semih Bal ◽  
Zoltán Ádám Tamus

The effect of short-term (3- and 6-h-long) periodic thermal aging was investigated at three different temperatures on PVC cables and PVC films. Three different temperatures (110, 125, and 140 °C) were used for aging PVC cables and one (110 °C) for PVC films. PVC films were prepared for the investigation containing 0, 30, 40, and 50 weight percent of dioctyl phthalate plasticizer (DOP). The effect of short-term thermal aging was monitored by electrical (dielectric spectrum and voltage response measurement) and mechanical (Shore D hardness) methods. From the loss factor measurements, different deducted quantities were calculated and compared with Shore D hardness, which has been shown to be a parameter reflecting the effect of short-term thermal aging on PVC insulation. The measurements revealed that Shore D hardness is not the best property for monitoring aging. Instead, increasing dissipated power and the shifting behavior of tan δ–frequency curves proved to be the best phenomena for assessing the impact of thermal aging. Simple deducted quantities may provide a basis for following short-term thermal aging.


Vox Sanguinis ◽  
2020 ◽  
Author(s):  
Linda Larsson ◽  
Per Sandgren ◽  
Sara Ohlsson ◽  
Julia Derving ◽  
Tove Friis‐Christensen ◽  
...  

2020 ◽  
Vol 56 (5) ◽  
pp. 515-530 ◽  
Author(s):  
Antonio Greco ◽  
Francesca Ferrari ◽  
Alfonso Maffezzoli

This work is aimed to study the application of a bio-based plasticizer, obtained by acetylation and epoxydation of cardanol, for the production of soft PVC foams. The use of epoxidized cardanol acetate allowed obtaining a more efficient foaming of soft PVC compared to phthalate plasticizer bis(2-ethylhexyl) phthalate (DEHP), mainly due to the lower viscosity attained in the decomposition range of azodicarbonamide (AZDC). As a consequence, the foams produced by epoxidized cardanol acetate showed a lower density compared to those produced with DEHP. The lower density yielded lower values of compressive modulus. However, the modulus was shown to be not only dependent on the density, but also showed a direct dependence on the type of plasticizer used, in addition to processing temperature and AZDC content. As a consequence, the specific compressive modulus also showed a direct dependence on the type of plasticizer, processing temperature and AZDC content. Such dependence was explained by considering different cellular morphologies developed during foaming under different processing conditions, including type of plasticizer. In particular, it was shown that the lower viscosity attained by epoxidized cardanol acetate plasticized PVC involved an increase of the average pore size of the foam, which was shown to be the main cause of the variation of the specific compressive modulus.


2020 ◽  
Vol 69 (7) ◽  
pp. 727-735
Author(s):  
Hadeel Hosney ◽  
Eslam G. Al-Sakkari ◽  
Ahmad Mustafa

Sign in / Sign up

Export Citation Format

Share Document