scholarly journals Bleaching Flax Roving With Poly(Acrylic Acid) Magnesium Salt As Oxygen Bleaching Stabilizer For Hydrogen Peroxide

2021 ◽  
Author(s):  
Jie Liu ◽  
Wenqi Jiang ◽  
Ling Sun ◽  
Chun Lv
Keyword(s):  
Hydrogen Peroxide ◽  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Magnesium Salt ◽  
Capillary Effect ◽  
Sodium Hydroxide Concentration ◽  
Silicon Oxygen ◽  
Oxygen Bleaching ◽  
Poly Acrylic Acid

Abstract Alkali-oxygen one-bath scouring and bleaching process of the flax roving was studied by using a new type of synthesized non-silicon oxygen bleaching stabilizer Poly(acrylic acid) magnesium instead of sodium silicate. Based on the analysis of the effects of single factors such as sodium hydroxide concentration, hydrogen peroxide concentration, temperature, time and the amount of the synthesized non-silicon oxygen bleaching stabilizer poly(acrylic acid) magnesium salt on the performance of the bleached flax roving, including the whiteness, the breaking tenacity, the capillary effect and the weight loss ratio. The optimal process for the application of the stabilizer was determined by orthogonal test, namely, hydrogen peroxide concentration 8.5 g/L, sodium hydroxide concentration 5 g/L, sodium bisulfite 3 g/L, sodium carbonate 3 g/L, the synthesized non-silicon oxygen bleaching stabilizer poly(acrylic acid) magnesium 5.5 g/L, scoured and bleached at 90 ℃ for 60 min, and the bath ratio was 25:1. Compared with the traditional oxygen bleaching stabilizer sodium silicate, it not only has good ability to inhibit the rapid decomposition of hydrogen peroxide, but also has the advantages of higher whiteness, higher capillary effect, good feel and breaking tenacity, and can effectively solve the "silicon scale" problem and improve the quality of flax products.

scholarly journals Synthesizing environmentally friendly non-silicone oxygen bleaching stabilizer for linen yarn using oligomeric acrylic acid

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jie Liu ◽  
Chun Lv
Keyword(s):  
Hydrogen Peroxide ◽  
Reaction Time ◽  
Acrylic Acid ◽  
Reaction Temperature ◽  
Metal Ion ◽  
Monomer Concentration ◽  
Environmentally Friendly ◽  
Test Method ◽  
Magnesium Salt ◽  
Oxygen Bleaching

AbstractUsing potassium peroxodisulfate as an initiator and acrylic acid as a monomer, an acrylic acid oligomer was synthesized and then compounded with magnesium salt to form a non-silicone oxygen bleaching stabilizer. By investigating the effects of reaction temperature, reaction time, initiator concentration, monomer concentration, and magnesium salt dosage on product performance, the effect of stabilizers on linen yarn bleaching was analyzed. The synthetic conditions of oxygen bleaching stabilizer were determined by orthogonal test method, namely, acrylic acid monomer concentration 25%, initiator dosage 5%, oligomeric acrylic acid and magnesium salt compound ratio 5:1, reaction temperature 65 °C, reaction time 4 h. At this time, the chelated iron value of the product was as high as 239.314 mg/g, and the chelated calcium value also reached 145.000 mg/g. The dosage of the synthesized stabilizer were determined to be 4 g/L through indicators such as the decomposition rate of hydrogen peroxide and whiteness. The results showed that the environmentally friendly non-silicone oxygen bleaching stabilizer not only had a good ability to inhibit the decomposition of hydrogen peroxide, but also provided bleached linen yarn with a superior degree of whiteness and less metal ion residue, which can effectively solve the “silicon scale” problem and improve the quality of the pre-treatmented products.

Soft ionic liquid based resistive memory characteristics in a two terminal discrete polydimethylsiloxane cylindrical microchannel

2020 ◽  
Vol 8 (38) ◽  
pp. 13368-13374
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Jinho Bae
Keyword(s):  
Ionic Liquid ◽  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Salt ◽  
Resistive Memory ◽  
Cylindrical Microchannel ◽  
Memory Characteristics ◽  
Poly Acrylic Acid

This paper proposes a novel soft ionic liquid (IL) electrically functional device that displays resistive memory characteristics using poly(acrylic acid) partial sodium salt (PAA-Na+:H2O) solution gel and sodium hydroxide (NaOH) in a thin polydimethylsiloxane (PDMS) cylindrical microchannel.

Study on the Chemical Modification Process of Jute Fiber

TAPPI Journal ◽  
2010 ◽  
Vol 9 (2) ◽  
pp. 23-29 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration, and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration, and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

Preparation of acetate-grade dissolving pulp from eucalyptus by processes including alkaline pretreatment and combined post-treatments with xylanase and alkali

TAPPI Journal ◽  
2013 ◽  
Vol 12 (9) ◽  
pp. 19-24
Author(s):  
WEN LIU ◽  
SHUKE ZHOU ◽  
XIAOHUA QI ◽  
JUNWEN PU
Keyword(s):  
Hydrogen Peroxide ◽  
Sodium Hydroxide ◽  
Degree Of Polymerization ◽  
Kraft Pulping ◽  
Dissolving Pulp ◽  
Alkaline Pretreatment ◽  
Cellulose Content ◽  
Optimal Conditions ◽  
Pulp Bleaching ◽  
Sodium Hydroxide Concentration

In this investigation, alkaline pretreatment before kraft pulping and combined post-treatments with xylanase and alkali after bleaching were applied to obtain an acetate-grade dissolving pulp. Bleaching sequences using oxygen or hydrogen peroxide were also studied. The brightness, α-cellulose content, and degree of polymerization (DP) of the bleached pulps from different bleaching sequences were evaluated. Alkaline pretreatment resulted in a higher α-cellulose content in the pulp. When a D1ED2P bleaching sequence was applied, the pulp obtained had an ISO brightness of 87.5%, a DP of 1050, and an α-cellulose content of 92.7%. The requirements for an acetate-grade dissolving pulp can then be met when followed by combined post-treatments with xylanase and alkali under the optimal conditions of 120 IU•g–1 xylanase dosage and 4% sodium hydroxide concentration.

scholarly journals Effect of sodium hydroxide concentration on the compressive strength of geopolymer mortar using fly ash PLTU Tanjungjati B Jepara

2022 ◽  
Vol 955 (1) ◽  
pp. 012010
Author(s):  
A Kustirini ◽  
Antonius ◽  
P Setiyawan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Coal Industry ◽  
Waste Materials ◽  
Geopolymer Concrete ◽  
Sodium Hydroxide Concentration ◽  
Alkaline Activator ◽  
Maximum Compressive Strength

Abstract Geopolymer concrete is concrete that uses environmentally friendly materials, using fly ash from waste materials from the coal industry as a substitute for cement. To produce geopolymer concrete, an alkaline activator is required, with a mixture of Sodium Hydroxide and Sodium Silicate. This research is an experimental study to determine the effect of variations in the concentration of sodium hydroxide (NaOH) 8 Mol, 10 Mol, 12 Mol, and 14 Mol on the compressive strength of geopolymer concrete. Mortar Geopolymer uses a mixture of 1: 3 for the ratio of fly ash and sand, 2.5: 0.45 for the ratio of sodium silicate and sodium hydroxide as an alkaline solution. The specimens used a cube mold having dimension 5 cm x 5 cm x 5 cm, then tested at 7 days and 28 days. The test resulted that concentration of NaOH 12 Mol obtained the maximum compressive strength of geopolymer concrete, that is 38.54 MPa. At concentrations of 12 Mol NaOH and exceeding 12M, the compressive strength of geopolymer concrete decreased.

Nanoscale Elastic and Tribological Properties of Poly(Acrylic Acid) Superabsorbent Gels

2008 ◽  
Vol 1085 ◽  
Author(s):  
Beatriz Talavera ◽  
Juan J. Martínez ◽  
Francisca Santiago ◽  
M. Teresa Cuberes
Keyword(s):  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Acrylate ◽  
Water Molecules ◽  
Friction Force Microscopy ◽  
Ambient Conditions ◽  
Force Microscopy ◽  
Topographic High ◽  
Poly Acrylic Acid

ABSTRACTUltrasonic Force Microscopy and Friction Force Microscopy have been applied to the characterization of the elastic and tribological responses of poly(acrylic acid) hydrogels at ambient conditions. The gels were prepared by free radical polymerization of acrylic acid monomers partially neutralized by sodium hydroxide, using N, N'-methylen-bis-acrylamide as a crosslinker. Nanoscale domains with different stiffness and friction are observed. Increasing the amount of crosslinker leads to the formation of smaller, more densely packed domains. The domains with higher stiffness also exhibit higher friction and lower topographic high. The results can be understood by assuming that (i) neutralization by sodium hydroxide leads to the formation of both acrylic acid and sodium acrylate polymeric strands (ii) the observed domains differ in their acrylic acid / sodium acrylate content. In the acrylic acid rich domains, hydrogen bonding among the polymeric strands explains a higher stiffness and lower topography. In the sodium acrylate rich domains, lubrication by water molecules linked by solvation to the sodium counterions accounts for a lower friction.

Research on the Bleaching Process of the Non-Silicon Oxygen Bleaching Stabilizer

2014 ◽  
Vol 685 ◽  
pp. 64-67
Author(s):  
Hua Ling He ◽  
Sheng Lu ◽  
Ming Su Song ◽  
Zhi Cai Yu ◽  
De Hong Cheng
Keyword(s):  
Hydrogen Peroxide ◽  
Breaking Strength ◽  
Tetraacetic Acid ◽  
Optimal Conditions ◽  
Hydrogen Peroxide Decomposition ◽  
Bleaching Process ◽  
Peroxide Bleaching ◽  
Peroxide Decomposition ◽  
Silicon Oxygen ◽  
Oxygen Bleaching

In this study, a type of non-silicon oxygen bleaching stabilizer was used to cotton fabric in the hydrogen peroxide bleaching process. This type of novel non-silicon oxygen bleaching stabilizer was prepared mainly with ethylene diamine tetraacetic acid (EDTA) and magnesium chloride. The results showed that adding the non-silicon oxygen bleaching stabilizer into the bleaching solution obviously decreased the hydrogen peroxide decomposition rate and improved the fabric whiteness. Optimal conditions was found as follow: non-silicon oxygen bleaching stabilizer 4.5 g/l; bleaching temperature 75-85 °C; pH of bleaching liquid 11; bleaching time 40-45 min. In summary, the results showed that the self-made non-silicon oxygen bleaching stabilizer could make the cotton fabrics obtained great whiteness, capillary ability and breaking strength.

Sign in / Sign up

Export Citation Format

Share Document