scholarly journals The Impacts of Freeze-thaw Cycles on Saturated Hydraulic Conductivity and Microstructure of Saline-alkali Soils

2021 ◽  
Author(s):  
Wenshuo Xu ◽  
Kesheng Li ◽  
Longxiao Chen ◽  
Weihang Kong ◽  
Chuanxiao Liu
Keyword(s):  
Hydraulic Conductivity ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Water Content ◽  
Size Distribution ◽  
Soil Permeability ◽  
Freeze Thaw ◽  
Alkali Soil ◽  
Thaw Cycle ◽  
Freeze Thaw Cycle

Abstract Study on the microscopic structure of saline-alkali soil can reveal the change of its permeability more deeply. In this paper, the relationship between permeability and microstructure of saline-alkali soil with different dry densities and water content in the floodplain of southwestern Shandong Province was studied through freeze-thaw cycles. A comprehensive analysis of soil samples was conducted using particle-size distribution, X-Ray diffraction, Freeze-Thaw cycle test, saturated hydraulic conductivity test and mercury intrusion porosimetry. The poor microstructure of soil is the main factor that leads to the category of micro-permeable soil. The porosity of the local soil was only 6.19–11.51%, and ultra-micropores (< 0.05 µm) and micropores (0.05-2 µm) dominated the pore size distribution. Soil saturated water conductivity was closely related to its microscopic pore size distribution. As the F-T cycles progressed, soil permeability became stronger, with the reason the pore size distribution curve began to shift to the small pores (2–10 µm) and mesopores (10–20 µm), and this effect was the most severe when the freeze-thaw cycle was 15 times. High water content could promote the effects of freeze-thaw cycles on soil permeability and pore size distribution, while the increase of dry density could inhibit these effects. The results of this study provide a theoretical basis for the remediation of saline-alkali soil in the flooded area of Southwest Shandong.

scholarly journals The impacts of freeze–thaw cycles on saturated hydraulic conductivity and microstructure of saline–alkali soils

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wenshuo Xu ◽  
Kesheng Li ◽  
Longxiao Chen ◽  
Weihang Kong ◽  
Chuanxiao Liu
Keyword(s):  
Hydraulic Conductivity ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Water Content ◽  
Size Distribution ◽  
Saturated Hydraulic Conductivity ◽  
High Water Content ◽  
Soil Permeability ◽  
Freeze Thaw ◽  
Alkali Soil

AbstractStudy on the microscopic structure of saline–alkali soil can reveal the change of its permeability more deeply. In this paper, the relationship between permeability and microstructure of saline–alkali soil with different dry densities and water content in the floodplain of southwestern Shandong Province was studied through freeze–thaw cycles. A comprehensive analysis of soil samples was conducted using particle-size distribution, X-ray diffraction, freeze–thaw cycles test, saturated hydraulic conductivity test and mercury intrusion porosimetry. The poor microstructure of soil is the main factor that leads to the category of micro-permeable soil. The porosity of the local soil was only 6.19–11.51%, and ultra-micropores (< 0.05 μm) and micropores (0.05–2 μm) dominated the pore size distribution. Soil saturated water conductivity was closely related to its microscopic pore size distribution. As the F–T cycles progressed, soil permeability became stronger, with the reason the pore size distribution curve began to shift to the small pores (2–10 μm) and mesopores (10–20 μm), and this effect was the most severe when the freeze–thaw cycle was 15 times. High water content could promote the effects of freeze–thaw cycles on soil permeability and pore size distribution, while the increase of dry density could inhibit these effects. The results of this study provide a theoretical basis for the remediation of saline–alkali soil in the flooded area of Southwest Shandong.

scholarly journals Strength and Microscopic Damage Mechanism of Yellow Sandstone with Holes under Freezing and Thawing

2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Huren Rong ◽  
Jingyu Gu ◽  
Miren Rong ◽  
Hong Liu ◽  
Jiayao Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Pore Size ◽  
Power Function ◽  
Damage Mechanism ◽  
Uniaxial Compression Test ◽  
Freezing And Thawing ◽  
Freeze Thaw ◽  
Thaw Cycle ◽  
Freeze Thaw Cycle ◽  
Microscopic Damage

In order to study the damage characteristics of the yellow sandstone containing pores under the freeze-thaw cycle, the uniaxial compression test of saturated water-stained yellow sandstones with different freeze-thaw cycles was carried out by rock servo press, the microstructure was qualitatively analyzed by Zeiss 508 stereo microscope, and the microdamage mechanism was quantitatively studied by using specific surface area and pore size analyzer. The mechanism of weakening mechanical properties of single-hole yellow sandstone was expounded from the perspective of microstructure. The results show the following. (1) The number of freeze-thaw cycles and single-pore diameter have significant effects on the strength and elastic modulus of the yellow sandstone; the more the freeze-thaw cycles and the larger the pore size, the lower the strength of the yellow sandstone. (2) The damage modes of the yellow sandstone containing pores under the freeze-thaw cycle are divided into five types, and the yellow sandstone with pores is divided into two areas: the periphery of the hole and the distance from the hole; as the number of freeze-thaw cycles increases, different regions show different microscopic damage patterns. (3) The damage degree of yellow sandstone is different with freeze-thaw cycle and pore size. Freeze-thaw not only affects the mechanical properties of yellow sandstone but also accelerates the damage process of pores. (4) The damage of the yellow sandstone by freeze-thaw is logarithmic function, and the damage of the yellow sandstone is a power function. The damage equation of the yellow sandstone with pores under the freezing and thawing is a log-power function nonlinear change law and presents a good correlation.

scholarly journals Study on the Mechanical Criterion of Ice Lens Formation Based on Pore Size Distribution

2020 ◽  
Vol 10 (24) ◽  
pp. 8981
Author(s):  
Yuhang Liu ◽  
Dongqing Li ◽  
Lei Chen ◽  
Feng Ming
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Water Content ◽  
Size Distribution ◽  
Initial Water Content ◽  
Mean Stress ◽  
Initial Water ◽  
Unfrozen Water Content ◽  
The Mean ◽  
Lens Formation

Ice lens is the key factor which determines the frost heave in engineering construction in cold regions. At present, several theories have been proposed to describe the formation of ice lens. However, most of these theories analyzed the ice lens formation from a macroscopic view and ignored the influence of microscopic pore sizes and structures. Meanwhile, these theories lacked the support of measured data. To solve this problem, the microscopic crystallization stress was converted into the macro mean stress through the principle of statistics with the consideration of pore size distribution. The mean stress was treated as the driving force of the formation of ice lens and induced into the criterion of ice lens formation. The influence of pore structure and unfrozen water content on the mean stress was analyzed. The results indicate that the microcosmic crystallization pressure can be converted into the macro mean stress through the principle of statistics. Larger mean stress means the ice lens will be formed easier in the soil. The mean stress is positively correlated with initial water content. At the same temperature, an increase to both the initial water content and the number of pores can result in a larger mean stress. Under the same initial water content, mean stress increases with decreasing temperature. The result provides a theoretical basis for studying ice lens formation from the crystallization theory.

Compaction behaviour of lime-treated metakaolin

2020 ◽  
Author(s):  
Mozhen Hu ◽  
Yu-Jun Cui ◽  
Yunzhi Tan
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Water Content ◽  
Size Distribution ◽  
Uniform Structure ◽  
Dry Density ◽  
Soil Stiffness ◽  
Effect Of Water ◽  
Compaction Curve ◽  
Lime Addition

Metakaolin has been widely used as pozzolanic additive to improve the pozzolanic activity of lime-based products. In this study, normal standard Proctor compaction test was performed on metakaolin with (5% lime) and without (0% lime) lime addition. The changes in stiffness, suction and microstructure with remoulding water content were investigated on statically compacted samples. Results show that lime-treated metakaolin exhibits one and half-peak compaction curve, while untreated metakaolin exhibits common one-peak compaction curve. The uncommon shape of the compaction curve of the treated metakaolin can be explained by the non-fully developed soil suction when water is not continuous. Treated and untreated samples compacted at both dry and wet of optimum show uni-modal pore size distribution characteristics, indicating the absence of aggregates. This is related to the specific thermal treatment, forming separate metakaolin platelets and leading to a modified uniform structure with diffuse platelets. The soil stiffness is rather dominated by the number of particle contacts or soil dry density, the effect of suction being insignificant. For the suction changes, on the dry side, the effect of pore size distribution prevails facing the effect of water content, while on wet side it is the effect of water content that becomes prevailing.

scholarly journals Investigation on the Deterioration Mechanism of Tuff Stones Used for the Exteriors at the Former Koshien Hotel

2020 ◽  
Vol 172 ◽  
pp. 20008
Author(s):  
Koki Yamada ◽  
Chiemi Iba ◽  
Tomoko Uno ◽  
Kazuma Fukui ◽  
Daisuke Ogura
Keyword(s):  
Hydraulic Conductivity ◽  
Physical Properties ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Vapor Permeability ◽  
Cultural Significance ◽  
Water Permeation ◽  
Deterioration Mechanism ◽  
Main Factor

The former Koshien Hotel is an historic Japanese architectural structure, where two different tuffs called Nikkaseki and Tatsuyamaishi were used to build the exterior. Despite its cultural significance, the building’s exterior is deteriorating in many ways, with water permeation being the main factor. In this study, the hygrothermal properties of both Nikkaseki and Tatsuyamaishi were measured in order to examine the correlation between deterioration mechanisms and the tuff characteristics in detail. The basic physical properties, pore size distribution, vapor permeability, hydraulic conductivity, and sorption isotherm were measured. The results of a comparison of two tuffs led us to hypothesize that the main reason behind Nikkaseki’s deterioration is expansive freezing, while that of Tatsuyamaishi is caused by repeating dehydration or dry-wet cycles.

Hydraulic conductivity of clay mixed with nanomaterials

2015 ◽  
Vol 52 (6) ◽  
pp. 808-811 ◽  
Author(s):  
C.W.W. Ng ◽  
J.L. Coo
Keyword(s):  
Hydraulic Conductivity ◽  
Aluminum Oxide ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Flow Paths ◽  
Mercury Intrusion ◽  
Flexible Wall ◽  
Conductivity Behavior

The focus of this note is to investigate the hydraulic conductivity behavior of clay mixed with nanomaterials. Two different nanomaterials — namely, gamma-aluminum oxide powder (γ-Al2O3) and nano-copper oxide (CuO) — were selected and mixed with clay at different percentages (i.e., 2%, 4%, and 6%). Hydraulic conductivity tests were carried out in a flexible wall permeameter following the ASTM D5084 standard. Mercury intrusion porosimetry (MIP) tests were also carried out to determine the pore-size distribution. At 2% of γ-Al2O3 and nano-CuO, the hydraulic conductivity of clay decreased 30% and 45%, respectively. As the proportion of the nanomaterial increases, the reduction of hydraulic conductivity becomes less prominent as flow paths devoid of nanomaterials are unlikely. Reduction of hydraulic conductivity is due to the pores of clay being clogged by the nanomaterial. Pore-size distribution curves show that the largest pore size reduced by 20% when clay was mixed with 4% nano-CuO.

Sign in / Sign up

Export Citation Format

Share Document