Separation of Emulsified Oil from Industrial Wastewater Using Poly Silicate Ferro-Aluminum Sulphate (PSFAS): A Novel Methodology for the Attainment of Very High Separation Efficiency

2021 ◽  
Author(s):  
Anup Kumar Bairagi ◽  
Kollati Prudhvi Ravikumar ◽  
Abanti Sahoo ◽  
Soumya Sanjeeb Mohapatra ◽  
Sangam Agrawal
Keyword(s):  
Industrial Wastewater ◽  
Metal Content ◽  
Separation Efficiency ◽  
Contaminated Water ◽  
Emulsified Oil ◽  
Aluminum Sulphate ◽  
Very High ◽  
High Separation ◽  
Maximum Separation

Abstract The large amount of wastewater generated from textile industries, petroleum industries, chemical industries contains heavy metals, suspended solids, hazardous waste, oils, fatty acids, dyes, pigment etc. It is very important to improve the quality of contaminated water before it discharges into the water sources or use. In the current work, an efficient methodology has been developed to separate emulsified oil from wastewater. The emulsified oil is tried to separate by using poly silicate Ferro aluminium sulphates, a flocculent. In addition to the above, the maximum separation efficiency for the devolved process is also revealed. Using PSFA, up to 93.5 % separation efficiency is achieved, and the discussed methodology can separate emulsified forms of the oil without altering the efficiency. The dissolved solid and metal content are also considered as the controlling parameters for the separation efficiency. The optimum TDS and the metal content must be maintained at 560 mg/L and 2 mg/L, respectively, to attain maximum separation efficiency.

Gas Liquid Vane Separators in High Pressure Applications

2010 ◽  
Author(s):  
Dani Fadda ◽  
David Barker
Keyword(s):  
Separation Efficiency ◽  
Pressure Vessels ◽  
Cfd Modeling ◽  
Test Results ◽  
Capacity Curves ◽  
Liquid Handling ◽  
Wide Range ◽  
Computational Fluid Dynamics Cfd ◽  
Very High ◽  
High Separation

Vane separators are inertial devices used to remove entrained liquids from gas. They are utilized in pressure vessels operating at a wide range of temperatures and pressures. Computational Fluid Dynamics (CFD) modeling and sizing calculations are used to evaluate the loading to a vane separator and determine the maximum overall gas and liquid handling capacity of the pressure vessel. Test results, performed at operating pressures up to 133 bar (1931 psia) using live natural gas illustrate that, when sized correctly based on the vane’s capacity curves and CFD modeling, vane separators continue to have high separation efficiency at very high operating pressures.

scholarly journals Generation, characteristics and disposal of sew age sludge produced on treatment plant of Tatarstan

2019 ◽  
pp. 537-543
Author(s):  
Svetlana Yu. Selivanovskaya ◽  
Venera Z. Latypova
Keyword(s):  
Sewage Sludge ◽  
Industrial Wastewater ◽  
Metal Content ◽  
Treatment Plant ◽  
Chemical Compounds ◽  
Organic Content ◽  
Environmental Damage ◽  
Toxicity Bioassay ◽  
Metal Composition

Treatment of wastewater unavoidably results in the generation of huge quantities of sludge in which pollutants concentrate and which must be disposed of. The aim of this study was to compare the quality of organic matter, the metal composition and toxic organic content in different sewage sludge. The presence of these substances caused environmental damage in soil, plants, groundwater and air. Sewage sludge was periodically sampled from five treatment plant treated municipal and industrial wastewater in common in Almetevsk, Elabuga, Zainsk, Kazan, Chistopol (Tatarstan, Russia). Knowledge of the metal content of the sludge is a key step in selecting or in ruling out the various disposal alternatives. For the approval of possible utilization of sewage sludge as fertilizer the estimation of the chemical compounds has to be supplemented with the toxicity bioassay.

Chromatographic Techniques for Rare Earth Elements Analysis

2017 ◽  
Vol 2 (4) ◽  
Author(s):  
Beibei Chen ◽  
Man He ◽  
Huashan Zhang ◽  
Zucheng Jiang ◽  
Bin Hu
Keyword(s):  
Rare Earth ◽  
Separation Efficiency ◽  
Stationary Phases ◽  
Exchange Chromatography ◽  
Chromatographic Techniques ◽  
Mobile Phases ◽  
Very High ◽  
High Separation ◽  
Separation Of Rees

AbstractThe present capability of rare earth element (REE) analysis has been achieved by the development of two instrumental techniques. The efficiency of spectroscopic methods was extraordinarily improved for the detection and determination of REE traces in various materials. On the other hand, the determination of REEs very often depends on the preconcentration and separation of REEs, and chromatographic techniques are very powerful tools for the separation of REEs. By coupling with sensitive detectors, many ambitious analytical tasks can be fulfilled.Liquid chromatography is the most widely used technique. Different combinations of stationary phases and mobile phases could be used in ion exchange chromatography, ion chromatography, ion-pair reverse-phase chromatography and some other techniques. The application of gas chromatography is limited because only volatile compounds of REEs can be separated. Thin-layer and paper chromatography are techniques that cannot be directly coupled with suitable detectors, which limit their applications. For special demands, separations can be performed by capillary electrophoresis, which has very high separation efficiency.

scholarly journals Utilization of Conventional Treatments and Agricultural Wastes as Low-Cost Adsorbents for Removal of Lead Ions from Wastewater

2021 ◽  
Vol 5 (1) ◽  
pp. 1-17
Author(s):  
Mohammed Jaafar Ali Alatabe
Keyword(s):  
Industrial Wastewater ◽  
Membrane Filtration ◽  
Municipal Wastewater ◽  
Low Cost ◽  
Agricultural Waste ◽  
Chemical Precipitation ◽  
Lead Ions ◽  
Dialysis Membrane ◽  
Very High

This study reviewed the most common methods for removing lead ions from industrial wastewater and municipal wastewater. Most of the research done was reviewed using traditional methods such as chemical precipitation, ion exchange, reverse osmosis, oxidation, evaporation, electric-dialysis, membrane filtration, and solvent extraction. These operations were related to several restrictions, that comprised the treatments to be limited to a definite concentration of the Lead (II) ions. Similarly, disadvantages complicated the production of huge quantities of dangerous waste although very high costs. This means these operations were very costly. For these reasons, to utilize the agricultural waste and low-cost adsorbents operation can be considered as eco-friendly. Currently, agricultural waste and natural materials are present in a huge quantity, and that is very damaging to the environment. Therefore, adsorption is an alternate operation for eliminating Lead (II) ions. According to the increased quality of adsorption operations, like the properties of improved adsorptive, increase availability, and cost-effectiveness, the operation is economical option for eliminating Lead(II) ions.

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura & Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

Management and Status of Japanese Public Waters

1991 ◽  
Vol 23 (1-3) ◽  
pp. 1-10 ◽  
Author(s):  
Takeshi Goda
Keyword(s):  
Water Quality ◽  
Coastal Waters ◽  
Industrial Wastewater ◽  
Quality Standards ◽  
Water Bodies ◽  
Industrial Wastewaters ◽  
Quality Of Water ◽  
Japanese Rivers ◽  
Per Capita

The management and status of public water bodies in Japan is discussed. The environmental quality standards which have been set and the levels of compliance with these standards are shown. The water quality of Japanese rivers, lakes, reservoirs, wetlands and coastal waters is described, and eutrophication problems are mentioned. The effects of changes in population density and levels of recycling of industrial wastewaters on the quality of water bodies are discussed. Almost 75% of industrial wastewater is now recycled. Per capita availability of freshwater in Japan is comparatively low, and the construction of 530 dams, in addition to the 2393 dams already in operation, is planned. Irrigation effluents from paddy fields are a major factor which influences river water quality in Japan. The improvement of water quality using various methods is discussed.

Quality-of-Life Measurement in Advanced Cancer: Assessing the Individual

1999 ◽  
Vol 17 (11) ◽  
pp. 3603-3611 ◽  
Author(s):  
Dympna Waldron ◽  
Ciaran A. O'Boyle ◽  
Michael Kearney ◽  
Michael Moriarty ◽  
Desmond Carney
Keyword(s):  
Quality Of Life ◽  
Advanced Cancer ◽  
Internal Validity ◽  
Semistructured Interview ◽  
Incurable Cancer ◽  
Life Measurement ◽  
The Difference ◽  
The Individual ◽  
Very High

PURPOSE: Despite the increasing importance of assessing quality of life (QoL) in patients with advanced cancer, relatively little is known about individual patient's perceptions of the issues contributing to their QoL. The Schedule for the Evaluation of Individual Quality of Life (SEIQoL) and the shorter SEIQoL–Direct Weighting (SEIQoL-DW) assess individualized QoL using a semistructured interview technique. Here we report findings from the first administration of the SEIQoL and SEIQoL-DW to patients with advanced incurable cancer. PATIENTS AND METHODS: QoL was assessed on a single occasion using the SEIQoL and SEIQoL-DW in 80 patients with advanced incurable cancer. RESULTS: All patients were able to complete the SEIQoL-DW, and 78% completed the SEIQoL. Of a possible score of 100, the median QoL global score was as follows: SEIQoL, 61 (range, 24 to 94); SEIQoL-DW, 60.5 (range, 6 to 95). Psychometric data for SEIQoL indicated very high levels of internal consistency (median r = .90) and internal validity (median R2 = 0.88). Patients' judgments of their QoL were unique to the individual. Family concerns were almost universally rated as more important than health, the difference being significant when measured using the SEIQoL-DW (P = .002). CONCLUSION: Patients with advanced incurable cancer were very good judges of their QoL, and many patients rated their QoL as good. Judgments were highly individual, with very high levels of consistency and validity. The primacy given to health in many QoL questionnaires may be questioned in this population. The implications of these findings are discussed with regard to clinical assessment and advance directives.

Sign in / Sign up

Export Citation Format

Share Document