Effects of Selected Weather Factors on Grain Moisture Reduction from Silking to Physiologic Maturity in Corn 1

1961 ◽  
Vol 53 (4) ◽  
pp. 225-229 ◽  
Author(s):  
Arnel R. Hallauer ◽  
W. A. Russell
2016 ◽  
Vol 3 (1) ◽  
pp. 55-60
Author(s):  
Yu. Lavrynenko ◽  
R. Vozhegova ◽  
O. Hozh

The purpose of the research is to identify effi cient microfertilizers and growth stimulants considering biologi- cal features of new corn hybrids of different FAO groups under irrigation conditions in the South of Ukraine and trace their impact on grain productivity of the plants. The methods of the research are the fi eld method – to study the interaction of the research object with experimental factors of the natural environment, to register the yield and evaluate the biometrical indices; the laboratory method – to measure soil moisture, grain moisture content and grain quality indices; the statistical method – to evaluate the reliability of the obtained results; the calculation methods – for economic and energetic assessment of the growing techniques used. The results of the research. The paper defi nes the impact of microfertilizers and growth stimulants on the yield and grain quality of the corn hybrids of different maturity groups and on the economic effi ciency of growing them. The conclusions of the research. Under irrigation conditions of the Southern Steppe of Ukraine it is recommended that the following hybrids should be grown in dark-chestnut soils: early maturity DN Pyvykha, medium-early Skadovskyi, medium maturity Kakhovskyi and medium-late Arabat, using the growth stimulants – treating the seeds with Sezam-Nano and fertilizing with Grainactive at the stage of 7–8 leaves.


2006 ◽  
Vol 2 (1) ◽  
pp. 73-94 ◽  
Author(s):  
Péter Mészáros ◽  
David B. Funk

The Unified Grain Moisture Algorithm is capable of improved accuracy and allows the combination of many grain types into a single “unified calibration”. The purposes of this research were to establish processes for determining unifying parameters from the chemical and physical properties of grains. The data used in this research were obtained as part of the United States Department of Agriculture-Grain Inspection, Packers and Stockyards Administration's Annual Moisture Calibration Study. More than 5,000 grain samples were tested with a Hewlett-Packard 4291A Material/Impedance Analyzer. Temperature tests were done with a Very High Frequency prototype system at Corvinus University of Budapest. Typical chemical and physical parameters for each of the major grain types were obtained from the literature. Data were analyzed by multivariate chemometric methods. One of the most important unifying parameters (Slope) and the temperature correction coefficient were successfully modeled. The Offset and Translation unifying parameters were not modeled successfully, but these parameters can be estimated relatively easily through limited grain tests.


2005 ◽  
Vol 1 (1) ◽  
pp. 77-93
Author(s):  
Bíborka Gillay ◽  
David B. Funk

The price paid for corn is usually based on 15.0 or 15.5 percent moisture content. However, corn must be dried below 13 percent moisture to ensure safe storage for a year or more. In the U.S., such stored corn cannot be directly remoistened before selling it, but it can be mixed with moist new-crop corn. Accurate moisture measurement of mixtures of dry and moist corn is important to permit adjustment of blending ratios to maximize profitability, but grain moisture meters are less accurate for mixtures of wet and dry grain. This research evaluated the differences between dielectric-type moisture meter results for mixed and equilibrated corn samples at different moisture levels and different measurement frequencies. Equilibrated grain samples tended to give lower moisture results than recently mixed grain samples - especially in the 1 to 10 MHz region. These differences permitted detection of mixtures by using moisture measurements at two frequencies.


1970 ◽  
pp. 33-36
Author(s):  
Faizan Mahmood, Hidayat- Ur-Rahman, Nazir Ahmad ◽  
Fahim-ul- Haq ◽  
Samrin Gul, Quaid Hussain ◽  
Ammara Khalid ◽  
Touheed Iqbal ◽  
...  

This study evaluated the performance of 64 half sib families (HSF) derived from “Azam” variety of maize using partially balanced lattice square design with two replications. Data were recorded on grain yield and other agronomic traits. Observations showed difference in half-sib families for studied traits. Among the 64 half-sib families, minimum days to 50% tasseling (51 days) were observed for HS-49 while maximum (57 days) for HS-63. Minimum days to 50% silking (56 days) were counted for HS-6 while maximum (63 days) for HS-23. Minimum days to 50% anthesis (55 days) were counted for HS-1 and HS-6 while maximum (62 days) for HS-23. Similarly, minimum ASI (-2 days) were observed in HS-1, HS-15, HS-16, HS-28 and HS-63 while maximum (2 days) in HS-48. Minimum (60 cm) ear height was recorded for HS-11 and maximum (93.5 cm) for HS-28. Minimum fresh ear weight (1.3 kg) was weighted for HS-17 while maximum (3.2 kg) for HS-21. Grain moisture was recorded minimum (19.35 %) for HS-19 and maximum (31.25%) for HS-2. HS-42 showed minimum (28 g) 100 kernel weight while HS-5 showed maximum (47 g). Grain yield was minimum (2323 kg ha-1) for HS-17 and maximum (5742 kg ha-1) for HS-21. Maximum heritability estimate (0.92) was recorded for fresh ear weight, while minimum (0.41) was observed for ear height.


Author(s):  
Kolyagina N.M. ◽  
Berezhnova T.A. ◽  
Klepikov O.V. ◽  
Kulintsova Ya.V.

Currently, and over the past decade, intensive research is being conducted in the field of organizational, preventive and therapeutic work with weather-sensitive and weather-dependent patients suffering from cardiovascular pathology. One of the most discussed issues in practical medicine is the application of climate conditions, with a fixed frequency and time of exposure. Conditions of influence of climatic factors, in some cases, can exceed the limits of the norm and, accordingly, have a pathological effect on the functional state of a person. Thus, we used data from statistically reliable results of 928 questionnaires processed and analyzed, reflecting the medical and social characteristics of patients with cardiovascular pathology. Direct results were evaluated by analyzing changes in the dynamics of indicators. According to a questionnaire survey, 62% of patients who have chronic diseases and seek medical help for diseases of the cardiovascular system believe that weather factors have a significant impact on their health. of the patients who do not have chronic diseases, 38% gave positive answers to the question about the weather sensitivity of their health. As part of the pilot project to create a system of long-term care for elderly and disabled citizens in the Voronezh region, patients are informed about the sources of obtaining specialized medical weather forecasts in the region; interaction between the parties is organized to conduct sanitary and educational work; medical examinations are organized and conducted; training sessions are organized for relatives of citizens who have lost the ability to self-service. Further organizational, preventive and therapeutic work with weather-sensitive and weather-dependent patients in the Voronezh region is characterized by an increase in the quality of medical care for patients with cardiovascular diseases.


2020 ◽  
pp. 341-350
Author(s):  
Di Wang ◽  
Changbin He ◽  
Haiqing Tian ◽  
Liu Fei ◽  
Zhang Tao ◽  
...  

Low productivity and high electricity consumption are considered problems of the hammer mill, which is widely used in current feed production. In this paper, the mechanical properties of corn grain ground by a hammer mill were analysed, and the key factors affecting the performance of the hammer mill were determined. The single-factor experiment and three-factor, three-level quadratic regression orthogonal experiment were carried out with the spindle speed, corn grain moisture content and number of hammers as experimental factors and the productivity and electricity consumption per ton as evaluation indexes. The results showed that the order of influence on the productivity was spindle speed > corn grain moisture content > number of hammers and that the order of influence on the electricity consumption per ton was corn grain moisture content > spindle speed > number of hammers. The parameters were optimized based on the response surface method with the following results: the spindle speed was 4306 r/min, the corn grain moisture content was 10%, and the number of hammers was 24. The validation experiment was carried out with the optimal parameters’ combination. The productivity and electricity consumption per ton were 988.12 kg/h and 5.37 kW·h/t, respectively, which were consistent with the predicted results of the model.


This article presents the results of twelve-year trials of the Region and Ryabota simple hybrids and the three-line hybrid Kameniar breeding laboratory of IOC NAANU hybrid labs, and analyzes their adaptation to ongoing climate change. The purpose of our work was to determine the formation of major economic traits in sunflower hybrids, depending on the agro-climatic conditions of the year.


2018 ◽  
Vol 44 (12) ◽  
pp. 1747 ◽  
Author(s):  
Lu-Lu LI ◽  
Jun XUE ◽  
Rui-Zhi XIE ◽  
Ke-Ru WANG ◽  
Bo MING ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document